Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

An efficient particle Fokker–Planck algorithm for rarefied gas flows

This paper is devoted to the algorithmic improvement and careful analysis of the Fokker–Planck kinetic model derived by Jenny et al. [1] and Gorji et al. [2]. The motivation behind the Fokker–Planck based particle methods is to gain efficiency in low Knudsen rarefied gas flow simulations, where conventional direct simulation Monte Carlo (DSMC) becomes expensive. This can be achieved due to the fact that the resulting model equations are continuous stochastic differential equations in velocity space. Accordingly, the computational particles evolve along independent stochastic paths and thus no collision needs to be calculated. Therefore the computational cost of the solution algorithm becomes independent of the Knudsen number. In the present study, different computational improvements were persuaded in order to augment the method, including an accurate time integration scheme, local time stepping and noise reduction. For assessment of the performance, gas flow around a cylinder and lid driven cavity flow were studied. Convergence rates, accuracy and computational costs were compared with respect to DSMC for a range of Knudsen numbers (from hydrodynamic regime up to above one). In all the considered cases, the model together with the proposed scheme give rise to very efficient yet accurate solution algorithms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verification of a fully implicit particle-in-cell method for the <!--${MathJax: TeX-AMS-MML_HTMLorMML}--> v &#x2225; -formalism of electromagnetic gyrokinetics in the XGC code

A fully implicit particle-in-cell method for handling the v ∥ -formalism of electromagnetic gyrokinetics has been implemented in XGC. By choosing the v ∥ -formalism, here we avoid introducing the nonphysical skin terms in Ampère's law, which are responsible for the well-known “cancellation problem” in the p ∥ -formalism. The v ∥ -formalism, however, is known to suffer from a numerical instability when explicit time integration schemes are used due to the appearance of a time derivative in the particle equations of motion from the inductive component of the electric field. Here, using the conventional δf scheme, we demonstrate that our implicitly discretized algorithm can provide numerically stable simulation results with accurate dispersive properties. We verify the algorithm using a test case for shear Alfvén wave propagation in addition to a case demonstrating the ion temperature gradient-kinetic ballooning mode (ITG-KBM) transition. The ITG-KBM transition case is compared to results obtained from other δf gyrokinetic codes/schemes, whose verification has already been archived in the literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Immersion Freezing in Particle-Based Aerosol-Cloud Microphysics: A Probabilistic Perspective on Singular and Time-Dependent Models

Cloud droplets containing immersed ice-nucleating particles (INPs) may freeze at temperatures above the homogeneous freezing threshold temperature in a process referred to as immersion freezing. In modeling studies, immersion freezing is often described using either so-called “singular” or “time-dependent” parameterizations. Here, we compare both approaches and discuss them in the context of probabilistic particle-based (super-droplet) cloud microphysics modeling. First, using a box model, we contrast how both parameterizations respond to idealized ambient cooling rate profiles and quantify the impact of the polydispersity of the immersed surface spectrum on the frozen fraction evolution. Presented simulations highlight that the singular approach, constituting a time-integrated form of a more general time-dependent approach, is only accurate under a limited range of ambient cooling rates. The time-dependent approach is free from this limitation. Second, using a prescribed-flow two-dimensional cloud model, we illustrate the macroscopic differences in the evolution in time of ice particle concentrations in simulations with flow regimes relevant to ambient cloud conditions. The flow-coupled aerosol-budget-resolving simulations highlight the benefits and challenges of modeling cloud condensation nuclei activation and immersion freezing on insoluble ice nuclei with super-particle methods. The challenges stem, on the one hand, from heterogeneous ice nucleation being contingent on the presence of relatively sparse immersed INPs, and on the other hand, from the need to represent a vast population of particles with relatively few so-called super particles (each representing a multiplicity of real particles). We discuss the critical role of the sampling strategy for particle attributes, including the INP size, the freezing temperature (for singular scheme) and the multiplicity.

54 ENVIRONMENTAL SCIENCES↗

Nonlocal Flocking Dynamics: Learning the Fractional Order of PDEs from Particle Simulations

Flocking refers to collective behavior of a large number of interacting entities, where the interactions between discrete individuals produce collective motion on the large scale. We employ an agent-based model to describe the microscopic dynamics of each individual in a flock, and use a fractional partial differential equation (fPDE) to model the evolution of macroscopic quantities of interest. The macroscopic models with phenomenological interaction functions are derived by applying the continuum hypothesis to the microscopic model. Instead of specifying the fPDEs with an ad hoc fractional order for nonlocal flocking dynamics, we learn the effective nonlocal influence function in fPDEs directly from particle trajectories generated by the agent-based simulations. We demonstrate how the learning framework is used to connect the discrete agent-based model to the continuum fPDEs in one- and two-dimensional nonlocal flocking dynamics. In particular, a Cucker–Smale particle model is employed to describe the microscale dynamics of each individual, while Euler equations with nonlocal interaction terms are used to compute the evolution of macroscale quantities. The trajectories generated by the particle simulations mimic the field data of tracking logs that can be obtained experimentally. They can be used to learn the fractional order of the influence function using a Gaussian process regression model implemented with the Bayesian optimization. We show in one- and two-dimensional benchmarks that the numerical solution of the learned Euler equations solved by the finite volume scheme can yield correct density distributions consistent with the collective behavior of the agent-based system solved by the particle method. Furthermore, the proposed method offers new insights into how to scale the discrete agent-based models to the continuum-based PDE models, and could serve as a paradigm on extracting effective governing equations for nonlocal flocking dynamics directly from particle trajectories.

97 MATHEMATICS AND COMPUTING↗

A stochastic model and Monte Carlo algorithm for fluctuation-induced H{sub 2} formation on the surface of interstellar dust grains

A stochastic algorithm for simulation of fluctuation-induced kinetics of H{sub 2} formation on grain surfaces is suggested as a generalization of the technique developed in our recent studies [1] where this method was developed to describe the annihilation of spatially separate electrons and holes in a disordered semiconductor. The stochastic model is based on the spatially inhomogeneous, nonlinear integro-differential Smoluchowski equations with random source term. In this paper we derive the general system of Smoluchowski type equations for the formation of H{sub 2} from two hydrogen atoms on the surface of interstellar dust grains with physisorption and chemisorption sites. We focus in this study on the spatial distribution, and numerically investigate the segregation in the case of a source with a continuous generation in time and randomly distributed in space. The stochastic particle method presented is based on a probabilistic interpretation of the underlying process as a stochastic Markov process of interacting particle system in discrete but randomly progressed time instances. The segregation is analyzed through the correlation analysis of the vector random field of concentrations which appears to be isotropic in space and stationary in time.

79 ASTRONOMY AND ASTROPHYSICS↗

An $\bar{F}$ Meshfree Treatment for Nearly Incompressible Materials

The computational modeling of nearly incompressible materials is a difficult task for many numerical methods, and even after several decades of investigation, it is still an active research area. This report seeks to address the treatment of incompressible materials in meshfree methods using a synergistic combination of two treatments. The first treatment is an $\bar{F}$ method, where the decomposed dilatational and deviatoric parts are calculated over different smoothing domains. The second treatment “activates” additional nodes throughout the domain to increase the flexibility of the model. We implement this synergistic combination in the context of the reproducing kernel particle method (RKPM) and present results for the Cook’s membrane benchmark problem. The results are compared with those using the composite tet10 finite element with a volume-averaged J formulation. We show that the combined treatment is an effective way to deal with nearly incompressible materials in a meshfree framework and compares well with other highly-effective treatments.

97 MATHEMATICS AND COMPUTING↗

Aspherical nucleosynthesis in a core-collapse supernova with 25 M {sub ☉} standard progenitor

The problem of nucleosynthesis was studied within an aspherical supernova model. The explosive burning was computed in a star of 25 M {sub ☉} initial mass on its final stage of evolution. The chemical composition of a presupernova was taken from realistic evolutionary computations. A piecewise parabolic method on a local stencil was applied to simulate the hydrodynamics of the explosion. The gravity was recomputed by a Poisson solver on a fine grid as the explosion developed. A detailed yield of chemical elements was performed as a post-processing step using the tracer particles method. The produced nuclei formed a layer-like structure enclosing large fragments of nickel and iron-group isotopes that were pushed away from the central region by an explosion along the polar direction. The light nuclei were preferentially moving along the equatorial plane forming a torus-like structure.

79 ASTRONOMY AND ASTROPHYSICS↗

Computing quasi-linear diffusion coefficients using the delta-f particle-in-cell method

Linear wave codes AORSA and TORIC couple to the bounce-averaged nonlinear Fokker-Planck code CQL3D through quasi-linear diffusion coefficients. Both linear wave codes rely on the quasi-local approximation that includes only first-order parallel and perpendicular gradient variations of cyclotron frequency and ignores field line curvature along with temperature and density gradient effects. The delta-f particle-in-cell (DFPIC) method has been successfully used for simulating ion-cyclotron fast wave behavior. This method also permits particle behavior such as multiple pass resonance, banana orbits, and superadiabaticity. We present new work on generating quasi-linear diffusion coefficients using the DFPIC method that will permit the electromagnetic particle-in-cell (EMPIC) code, VORPAL, to couple to CQL3D and to compare to AORSA and TORIC. A new multiple weight delta-f approach will be presented that converts velocity derivatives to action derivatives and yields a full tensor quasi-linear diffusion coefficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SU-E-T-753: Three-Dimensional Dose Distributions of Incident Proton Particle in the Polymer Gel Dosimeter and the Radiochromic Gel Dosimeter: A Simulation Study with MCNP Code

Purpose: The purpose of this study is to estimate the three-dimensional dose distributions in the polymer and the radiochromic gel dosimeter, and to identify the detectability of both gel dosimeters by comparing with the water phantom in case of irradiating the proton particles. Methods: The normoxic polymer gel and the LCV micelle radiochromic gel were used in this study. The densities of polymer and the radiochromic gel dosimeter were 1.024 and 1.005 g/cm{sup 3}, respectively. The dose distributions of protons in the polymer and radiochromic gel were simulated using Monte Carlo radiation transport code (MCNPX, Los Alamos National Laboratory). The shape of phantom irradiated by proton particles was a hexahedron with the dimension of 12.4 × 12.4 × 15.0 cm{sup 3}. The energies of proton beam were 50, 80, and 140 MeV energies were directed to top of the surface of phantom. The cross-sectional view of proton dose distribution in both gel dosimeters was estimated with the water phantom and evaluated by the gamma evaluation method. In addition, the absorbed dose(Gy) was also calculated for evaluating the proton detectability. Results: The evaluation results show that dose distributions in both gel dosimeters at intermediated section and Bragg-peak region are similar with that of the water phantom. At entrance section, however, inconsistencies of dose distribution are represented, compared with water. The relative absorbed doses in radiochromic and polymer gel dosimeter were represented to be 0.47 % and 2.26 % difference, respectively. These results show that the radiochromic gel dosimeter was better matched than the water phantom in the absorbed dose evaluation. Conclusion: The polymer and the radiochromic gel dosimeter show similar characteristics in dose distributions for the proton beams at intermediate section and Bragg-peak region. Moreover the calculated absorbed dose in both gel dosimeters represents similar tendency by comparing with that in water phantom.

60 APPLIED LIFE SCIENCES↗

The collisional particle-in-cell method for the Vlasov–Maxwell–Landau equations

We introduce an extension of the particle-in-cell method that captures the Landau collisional effects in the Vlasov–Maxwell–Landau equations. The method arises from a regularisation of the variational formulation of the Landau equation, leading to a discretisation of the collision operator that conserves mass, charge, momentum and energy, while increasing the (regularised) entropy. The collisional effects appear as a fully deterministic effective force, thus the method does not require any transport–collision splitting. The scheme can be used in arbitrary dimension, and for a general interaction, including the Coulomb case. We validate the scheme on scenarios such as the Landau damping, the two-stream instability and the Weibel instability, demonstrating its effectiveness in the numerical simulation of plasma.

Bailo, Rafael (ORCID:0000000180183799)↗

TH-A-19A-04: Latent Uncertainties and Performance of a GPU-Implemented Pre-Calculated Track Monte Carlo Method

Purpose: Assessing the performance and uncertainty of a pre-calculated Monte Carlo (PMC) algorithm for proton and electron transport running on graphics processing units (GPU). While PMC methods have been described in the past, an explicit quantification of the latent uncertainty arising from recycling a limited number of tracks in the pre-generated track bank is missing from the literature. With a proper uncertainty analysis, an optimal pre-generated track bank size can be selected for a desired dose calculation uncertainty. Methods: Particle tracks were pre-generated for electrons and protons using EGSnrc and GEANT4, respectively. The PMC algorithm for track transport was implemented on the CUDA programming framework. GPU-PMC dose distributions were compared to benchmark dose distributions simulated using general-purpose MC codes in the same conditions. A latent uncertainty analysis was performed by comparing GPUPMC dose values to a “ground truth” benchmark while varying the track bank size and primary particle histories. Results: GPU-PMC dose distributions and benchmark doses were within 1% of each other in voxels with dose greater than 50% of Dmax. In proton calculations, a submillimeter distance-to-agreement error was observed at the Bragg Peak. Latent uncertainty followed a Poisson distribution with the number of tracks per energy (TPE) and a track bank of 20,000 TPE produced a latent uncertainty of approximately 1%. Efficiency analysis showed a 937× and 508× gain over a single processor core running DOSXYZnrc for 16 MeV electrons in water and bone, respectively. Conclusion: The GPU-PMC method can calculate dose distributions for electrons and protons to a statistical uncertainty below 1%. The track bank size necessary to achieve an optimal efficiency can be tuned based on the desired uncertainty. Coupled with a model to calculate dose contributions from uncharged particles, GPU-PMC is a candidate for inverse planning of modulated electron radiotherapy and scanned proton beams. This work was supported in part by FRSQ-MSSS (Grant No. 22090), NSERC RG (Grant No. 432290) and CIHR MOP (Grant No. MOP-211360)

07 ISOTOPE AND RADIATION SOURCES↗

ExaMPM

ExaMPM is a mini-application for the Material Point Method (MPM) for studying the application of MPM to future exascale computing systems. MPM is a general method for computational mechanics and fluids and is used in a wide variety of science and engineering disciplines to study problems with large deformations, phase change, fracture, and other phenomena. ExaMPM provides a reference implementation of MPM as described in the 1994 work of Sulsky et.al. (Sulsky, Deborah, Zhen Chen, and Howard L. Schreyer. "A particle method for history-dependent materials." Computer methods in applied mechanics and engineering 118.1-2 (1994): 179-196.). The software can solve basic MPM problems in solid mechanics using the original algorithm of Sulsky with explicit time integration, basic geometries, and free-slip and no-slip boundary conditions as described in the reference. ExaMPM is intended to be used as a starting point to design new parallel algorithms for the next generation of DOE supercomputers.

Slattery, StuartR↗

ExaMPM

ExaMPM is a mini-application for the Material Point Method (MPM) for studying the application of MPM to future exascale computing systems. MPM is a general method for computational mechanics and fluids and is used in a wide variety of science and engineering disciplines to study problems with large deformations, phase change, fracture, and other phenomena. ExaMPM provides a reference implementation of MPM as described in the 1994 work of Sulsky et.al. (Sulsky, Deborah, Zhen Chen, and Howard L. Schreyer. "A particle method for history-dependent materials." Computer methods in applied mechanics and engineering 118.1-2 (1994): 179-196.). The software can solve basic MPM problems in solid mechanics using the original algorithm of Sulsky with explicit time integration, basic geometries, and free-slip and no-slip boundary conditions as described in the reference. ExaMPM is intended to be used as a starting point to design new parallel algorithms for the next generation of DOE supercomputers.

Slattery, Stuart R↗

Fast Time-Resolved Aerosol Collector: Proof of Concept

Atmospheric particles can be collected in the field on substrates for subsequent laboratory analysis via chemically sensitive single particle methods such as scanning electron microscopy with energy dispersed x-ray analysis. With moving substrates one can achieve time resolution of seconds to minutes. We demonstrate how to increase the time resolution to a few milliseconds to provide real-time information in this paper. Our fast time-resolved aerosol collector (“Fast-TRAC”) microscopically observes the particle collection on substrate and record an on-line video. Particle arrivals are resolved to within a single frame (17 to 4 ms in this setup), and the spatial locations are matched to the subsequent single particle analysis. This approach provides real-time information on particle size and number concentration. Applications are expected in airborne studies of cloud microstructure, pollution plumes, and long term site monitoring.

54 ENVIRONMENTAL SCIENCES↗

Reproducibility and Replication of Experimental Particle Physics Results

Recently, much attention has been focused on the replicability of scientific results, causing scientists, statisticians, and journal editors to examine closely their methodologies and publishing criteria. Experimental particle physicists have been aware of the precursors of non-replicable research for many decades and have many safeguards to ensure that the published results are as reliable as possible. The experiments require large investments of time and effort to design, construct, and operate. Large collaborations produce and check the results, and many papers are signed by more than three thousand authors. This paper gives an introduction to what experimental particle physics is and to some of the tools that are used to analyze the data. It describes the procedures used to ensure that results can be computationally reproduced, both by collaborators and by non-collaborators. It describes the status of publicly available data sets and analysis tools that aid in reproduction and recasting of experimental results. It also describes methods particle physicists use to maximize the reliability of the results, which increases the probability that they can be replicated by other collaborations or even the same collaborations with more data and new personnel. Examples of results that were later found to be false are given, both with failed replication attempts and one with alarmingly successful replications. While some of the characteristics of particle physics experiments are unique, many of the procedures and techniques can be and are used in other fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks

A 3D numerical model for the ablation of pellets and shattered pellet injection (SPI) fragments in tokamaks in the plasma disruption mitigation and fueling parameter space has been developed based on the Lagrangian particle code [R. Samulyak, X. Wang, H.-S. Chen, Lagrangian Particle Method for Compressible Fluid Dynamics, J. Comput. Phys., 362 (2018), 1-19]. The pellet code implements the low magnetic Reynolds number MHD equations, kinetic models for the electronic heating, a pellet surface ablation model, an equation of state that supports multiple ionization states, radiation, and a model for grad-B drift of the ablated material across the magnetic field. The Lagrangian particle algorithm is highly adaptive, capable of simulating a large number of fragments in 3D while eliminating numerical difficulties of dealing with the tokamak background plasma. The code has achieved good agreement with theory for spherically symmetric ablation flows. Axisymmetric simulations of neon and deuterium pellets in magnetic fields ranging from 1 to 6 Tesla have been compared with previous simulations using the FronTier code, and very good agreement has also been obtained. Furthermore, the main physics contribution of the paper is a detailed study of the influence of 3D effects, in particular grad-B drift, on pellet ablation rates and properties of ablation clouds. Smaller reductions of ablation rates in magnetic fields compared to axially symmetric simulations have been demonstrated because the ablated material is not confined to narrowing channels in the presence of grad-B drift. Contribution of various factors in the grad-B drift model has also been quantified.

97 MATHEMATICS AND COMPUTING↗

Conforming window functions for meshfree methods

Window functions provide a base for the construction of approximation functions in many meshfree methods. They control the smoothness and extent of the approximation functions and are commonly defined using Euclidean distances which helps eliminate the need for a meshed discretization, simplifying model development for some classes of problems. However, for problems with complicated geometries such as nonconvex or multi-body domains, poor solution accuracy and convergence can occur unless the extents of the window functions, and thus approximation functions, are carefully controlled, often a time consuming or intractable task. Here in this paper, we present a method to provide more control in window function design, allowing efficient and systematic handling of complex geometries. “Conforming” window functions are constructed using Bernstein–Bézier splines defined on local triangulations with constraints imposed to control smoothness. Graph distances are used in conjunction with Euclidean metrics to provide adequate information for shaping the window functions. The conforming window functions are demonstrated using the Reproducing Kernel Particle Method showing improved accuracy and convergence rates for problems with challenging geometries. Conforming window functions are also demonstrated as a means to simplify the imposition of essential boundary conditions.

, rapid design-to-analysis↗

The particle-gamma coincidence method: A brief introduction

Excitation energy information from particle detectors can significantly improve the analysis process of {gamma}-ray spectra and result in more detailed nuclear structure information. Therefore, a new setup at the HORUS {gamma}-ray spectrometer at the University of Cologne has been installed, housing silicon particle detectors at up to eight positions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗