Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Estimating a Large Phased Array Antenna Radiation Pattern by Computer Electromagnetic Simulation

The design of a conformal antenna for use on UAV's (Unmanned Aerial Vehicle) and other aircraft can be enhanced with computational electromagnetic modeling to determine the expected radiation patterns of the antenna when mounted on the aircraft. However, detailed simulation of the antenna structure and the aircraft together requires significant computational resources and time which may not be available. This paper details several methods for estimating the radiation pattern of a 50 by 50-element patch antenna. The Conformal Lightweight Antenna Structures for Aeronautical Communication Technologies (CLASACT) Program aims to build and test a 14.25 gigaherz (Ku-band) conformal antenna on a NASA-owned UAV. The antenna is intended for satellite communications and will enable communication between a ground station and a UAV when the separation distance is too great for line-of-sight communication. It is estimated that a 2 degree beamwidth will be necessary, requiring a 50 by 50 array of patch elements. The narrow beamwidth requirement, together with an element spacing of 0.6 lambda means that the array length will be 30 wavelengths, electrically very large. Three methods of varying complexity are described for estimating the total far-field radiation pattern. The results are shown for each method in the form of a normalized power pattern.

Mackenzie, Anne I.↗
NASA NTRS2018

Far-Field Pattern Measurement and Simulation of VHF Antenna at 60 MHz for Europa Clipper Mission

This paper presents measurements and simulations of a linearly polarized VHF folded dipole operating at 60 MHz for NASA’s upcoming Europa Clipper mission. The spacecraft contains a ground penetrating radar, consisting of an array of four VHF antennas, that will characterize the surface of Jupiter’s icy moon Europa. Measured far-field radiation patterns and reflection coefficients above a 50×80m perfect ground plane are compared to predicted results using commercial software. Normalized Far-Field radiation pattern cuts are measured utilizing a biconical antenna and receiver mounted on a flying drone. Simulations of the radiation pattern show that the number of lobes increases with the distance of the antenna from the ground due to the ground-bounce phenomenon. In addition, the measured and simulated reflection coefficients stay unchanged for height above 2 meters, which matches the predicted calculation of the reactive-near field region of this antenna. However, the antenna electrical parameters are optimized for use on the spacecraft and become detuned in the presence of a ground plane. Simulated and measured return loss discrepancy less than 0.5 dB is presented. Radiation pattern comparisons show similar agreement when taking into account the effect of far-field measurement uncertainties.

Decrossas, Emmanuel↗
NASA NTRS2018

Intra-Pixel Response Characterization of a HgCdTe Near Infrared Detector with a Pronounced Crosshatch Pattern

The “crosshatch” pattern is a recurring “feature” of HgCdTe arrays, specifically the Teledyne HAWAII family of near infrared detectors. It is a fixed pattern of high frequency QE variations along 3 directions generally thought to be related to the crystal structure of HgCdTe. The pattern is evident in detectors used in WFC3/IR, WISE, JWST, and in candidate detectors for Euclid and WFIRST. Using undersampled point sources projected onto a HAWAII-2RG detector, we show that the pattern induces photometric variations that are not removed by a flat-field calibration, thus demonstrating that the QE variations occur on scales smaller than the 18 micron pixels. Our testbed is the Precision Projector Laboratory’s astronomical scene generator, which can rapidly characterize the full detector by scanning thousands of undersampled spots. If not properly calibrated, detectors showing strong crosshatch may induce correlated errors in photometry, astrometry, spectroscopy, and shape measurements.

Smith, Roger↗
NASA NTRSDate not supplied

Laser Ablative Patterning of B4C and MoAlB Ceramics for Hydrophobic Surfaces

Through a novel laser ablative patterning (LAP) process, the present work reports the increase in wetting contact angle of molybdenum aluminum boride (MoAlB) and the reduction of dust adhesion. The LAP technique employed picosecond laser pulses to form a crosshatch pattern with micropillars on ceramic surfaces. The wetting behavior was successfully transitioned from hydrophilic (θ < 90°) to hydrophobic (θ > 90°), which may be related to Wenzel or Cassie-Baxter mechanisms. Parameters such as laser fluence and number of laser scans were varied to study their effects on ceramic surface characteristics. Dust adhesion experiments were performed on these hydrophobic ceramic surfaces, which showed that the adhesion of lunar soil simulant dust particles was significantly reduced in the patterned MoAlB surface. The patterned MoAlB samples were further examined using the surveying lunar dust influence on device efficacy (SLIDE) testbed to evaluate the wear performance.

Bai Cui↗
DOE OSTI2025

Laser-induced selective local patterning of vanadium oxide phases

The same elements can form different compounds with widely different physical properties. Synthesis of a single-phase material is commonly achieved by controlling experimental conditions. Synthesizing materials that incorporate multiple specific spatially distributed chemical phases is often challenging, especially if different phases must be organized into well-defined spatial patterns. Here, we present an efficient solid reaction laser annealing (SRLA) approach to directly write regions of different local chemical compositions. We demonstrate the practical utility of our approach by locally writing microscale patterns of distinct chemical phases in vanadium oxide thin films. Specifically, we achieved the controlled local recrystallization of a uniform V 2 O 3 matrix into VO 2 , V 3 O 5 , and V 4 O 7 regions exhibiting sharp 1st- and 2nd-order metal–insulator phase transitions over a wide range of critical temperatures, i.e., a characteristic feature of select vanadium oxides that is extremely sensitive to even minute structural or compositional imperfections. We utilized the local chemical phase writing to pattern spiking oscillators with distinct electrical behavior directly in the thin film sample without employing elaborate lithography fabrication. Our laser tuning local chemical composition opens a pathway to synthesize a wide range of artificially micropatterned composite materials, with precision and control unattainable in conventional material synthesis methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Simulation and analysis of small angle scattering (SAS) patterns of Ni-based superalloy microstructures generated by a phase-field model

This paper investigates the relationship between microstructural features and small-angle scattering (SAS) patterns in Ni-based superalloys using a combined phase-field and SAS simulation approach coupled with microstructure analyses. The simulated SAS patterns accurately capture key experimental observations previously reported in the literature, including the time-dependent transition from circular to square-shaped precipitates and the development of anisotropic SAS patterns. Importantly, our analysis reveals the correlations between characteristic length scales extracted from SAS profiles and microstructural descriptors, such as precipitate size and inter-precipitate distance. These findings provide a comprehensive understanding of the link between SAS profiles and microstructure evolution in Ni-based superalloys, offering valuable insights for materials characterization and design.

Microstructure↗
DOE OSTI2026

Efficient data-driven regression for reduced-order modeling of spatial pattern formation

We present an efficient data-driven regression approach for constructing reduced-order models (ROMs) of reaction-diffusion systems exhibiting pattern formation. The ROMs are learned non-intrusively from available training data of physically accurate numerical simulations. The method can be applied to general nonlinear systems through the use of polynomial model form, while not requiring knowledge of the underlying physical model, governing equations, or numerical solvers. The process of learning ROMs is posed as a low-cost least-squares problem in a reduced-order subspace identified via Proper Orthogonal Decomposition (POD). Numerical experiments on classical pattern-forming systems–including the Schnakenberg and Mimura–Tsujikawa models–demonstrate that higher-order surrogate models significantly improve prediction accuracy while maintaining low computational cost. The proposed method provides a flexible, non-intrusive model reduction framework, well suited for the analysis of complex spatio-temporal pattern formation phenomena.

Data-driven modeling↗
DOE OSTI2026

Comparing Synoptic Pattern Evolution for Flash‐Flood‐Producing and Non‐Flash‐Flood‐Producing Mesoscale Convective Systems in the United States

Understanding how the short-term evolution of synoptic weather patterns influence Mesoscale Convective Systems (MCSs) is essential, as these systems are responsible for over half of central U.S. flash floods, leading to substantial socioeconomic and water resource management impacts. This study analyzes long-term MCS data, flash flood reports, and atmospheric reanalyses from 2007 to 2017 using a machine learning clustering algorithm to examine how the synoptic weather patterns evolve prior to MCS initiation. While the clusters reflect seasonal and regional differences in MCS occurrence, they do not consistently distinguish between MCSs that do and do not produce flash floods. Systems in the southern Great Plains are more flood-prone when a synoptic-scale forcing, located near the system, drives strong water vapor transport from the nearby moisture source. More generally under different synoptic weather patterns, a broader precipitating area is the most dominant factor governing MCS flash flood potential.

atmospheric dynamics↗
DOE OSTI2025

Equilibrium-gated pattern formation: How molecular dissociation thermodynamics drive emergent behavior in dissipative polymeric systems

Emergent patterns in biological systems arise through dissipative processes that balance reaction and transport phenomena, producing highly functional properties from self-regulating mechanisms. Synthetic fabrication, by contrast, often relies on user-controlled, multistep methods that lack the self-organizing capabilities of natural systems. Inspired by nature, we sought chemical systems that integrate strongly coupled reaction and transport phenomena, identifying frontal ring-opening metathesis polymerization (FROMP) as a method capable of creating diverse forms and functions through reactive processing. By employing discrete molecular initiators, FROMP allows precise control of key reaction steps—inhibition, initiation, and propagation. Using an integrated computational and experimental framework, we uncover how near-equilibrium inhibition dynamics, coupled with far-from-equilibrium reaction kinetics, drive pattern formation in frontally polymerized synthetic materials. We propose the concept of equilibrium-gated pattern formation, demonstrating how initiator chemistry can be tuned to achieve programmable macroscale properties. Our study reveals a surprising insight: Emergent behavior in FROMP systems arises from the inhibition-dominated regime of resin composition, expanding prior observations that such behavior is confined to a narrow compositional space near the boundary between front quenching and uniform front propagation. We identify a broader compositional window, far from the quenching regime, where emergent behavior reliably manifests. This expanded design space significantly enhances the operational flexibility of reactive systems and their capacity for self-organization. Furthermore, these insights provide a roadmap for designing bioinspired materials with self-organizing capabilities, unlocking possibilities in synthetic manufacturing.

Architected Polymers↗
DOE OSTI2025

Fast calculation of diffraction patterns from an ensemble of aligned molecules

We report an algorithm to calculate electron diffraction patterns for molecules with anisotropic angular distribution, which is significantly faster than existing methods. The algorithm uses a transform to convert the molecular orientation distribution, which is a function of three Euler angles, to the atom-pair distribution functions which depend on the polar and azimuthal angles. The diffraction signal can then be calculated from the atom-pair distributions. We demonstrate the computation method numerically by calculating electron diffraction patterns for a symmetric top molecule (trifluoroiodomethane) and an asymmetric top molecule (formaldehyde) and show that it reduces the calculation time by approximately two orders of magnitude compared to the standard brute-force method. Here, the method can also be applied to the calculation of x-ray diffraction patterns.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2011

Clonal Selection Based Artificial Immune System for Generalized Pattern Recognition

The last two decades has seen a rapid increase in the application of AIS (Artificial Immune Systems) modeled after the human immune system to a wide range of areas including network intrusion detection, job shop scheduling, classification, pattern recognition, and robot control. JPL (Jet Propulsion Laboratory) has developed an integrated pattern recognition/classification system called AISLE (Artificial Immune System for Learning and Exploration) based on biologically inspired models of B-cell dynamics in the immune system. When used for unsupervised or supervised classification, the method scales linearly with the number of dimensions, has performance that is relatively independent of the total size of the dataset, and has been shown to perform as well as traditional clustering methods. When used for pattern recognition, the method efficiently isolates the appropriate matches in the data set. The paper presents the underlying structure of AISLE and the results from a number of experimental studies.

pattern recognition↗
NASA NTRS2020

Progress of Coating Stress Compensation of Silicon Mirrors for Lynx X-ray Telescope Mission Concept Using Thermal Oxide Patterning Method

A thermal oxide patterning method has proven to be effective for correcting coating-stress-induced distortion on flat silicon wafers. We report progress on developing this method for correcting curved silicon mirrors distorted by front-side iridium coatings. Owing to the difference in geometry, a finite element model has been established to calculate the appropriate duty cycle maps in thermal oxide hexagon patterns used for compensation. In addition, a photolithographic process, along with three-dimensional printed equipment, has been developed for creating patterns precisely on the back side of curved mirrors. The developed method has been used to recover the original surface shape of two silicon mirrors which are 100-mm long, 0.5-mm thick, having 312-mm radius of curvature, and 30 deg in azimuthal span (Wolter-I geometry). These mirrors’ front sides are sputter-coated by 20-nm iridium layers with ∼-70 N∕m integrated stress. Measurement results show that the developed method can mitigate coating-induced distortion by a factor of ∼5 in RMS height and ∼4 in RMS slope error, corresponding to ∼0.5 arc sec RMS slope error. Residual errors after correction are dominated by midfrequency ripples created during the annealing process, which will be resolved in the future. The presented method is precise and inexpensive and a potential candidate for resolving the coating stress issue for Lynx optics in the future.

x-ray↗
DOE OSTI2025

Molecular Layer Deposited Aluminum‐Based Hybrid Resist for High‐Resolution Nanolithography and Direct Ultra‐High Aspect Ratio Pattern Transfer

Inorganic-containing hybrid photoresists are critical for next-generation extreme ultraviolet (EUV) lithography and angstrom-era semiconductor miniaturization. However, associated conventional solution processing struggles to achieve ultrathin, uniform films with high conformality and compositional control, limiting overall patterning performance. Here, this study reports the systematic lithographic patterning characterization of an Al-based hybrid resist synthesized via vapor-phase molecular layer deposition (MLD), using the trimethylaluminum (TMA) metal precursor and the hydroquinone (HQ) aromatic organic linker. The resist supports both sub-20 nm high-resolution nanolithography and virtually infinite silicon plasma etch selectivity. Lithographic performance studied using electron beam lithography (EBL) as a proxy for EUV shows that, under an optimized process adopting post-exposure bake, the resist achieves the best resolution of 15.4 nm linewidth under stringent 1:1 line-space high-density patterning—limited only by the minimum beam size of the EBL system. The resist also shows wide dose latitude and balanced performance in resolution, roughness, and sensitivity. The infinite silicon etch selectivity, stemming from spontaneous aluminum oxyfluoride passivation layer formation, enables fabrication of micrometer-tall, 40 nm-wide silicon nanofin structures using only a ≈30 nm-thick resist layer, without no hard mask. These results highlight the potential of MLD-based hybrid resists for developing next-generation resist materials for micro/nanoelectronics manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Spatial analysis of cell patterning to aid genetic and phenotypic understanding of grass stomatal density: A case study in maize

Biological processes involve complex hierarchies where composite traits result from multiple component traits. However, holistically understanding of how sets of component traits interact to underpin genotype-to-phenotype relationships is generally lacking. Stomatal density (SD) is a tractable model system for exploring how high-throughput phenotyping (HTP) data could be exploited by a new spatial analysis approach to better understand a developmentally and functionally important trait. SD is a composite trait, resulting from various components related to cell identity and size, which are themselves governed by a series of spatio-developmental processes. Data from 192 recombinant inbred lines of maize [Zea mays (L.)] were analyzed by a new stomatal patterning phenotype (SPP) to (1) describe the average spatial probability distribution of the nearest neighboring stomata; (2) derive a core set of component traits related to cell size, cell packing, and positional probabilities; (3) build a structural equation model of component traits underlying SD; and (4) identify stomatal patterning quantitative trait loci (QTL). The core set of SPP-derived traits explained 74% of the variation in SD. Analyzing SPP component traits allowed some loci previously identified as generic SD QTL to be recognized as specific to lateral versus longitudinal elements of stomatal patterning. Therefore, this study highlights how novel insights can be gained by decomposing a composite trait (e.g., SD) into a set of component traits that were present in HTP data but not previously exploited.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Indicators of carbon alteration (ICAs) suggest patterns in reservoir methane emissions

Reservoir operations influence emissions via multiple causal pathways. In this paper, we quantify indicators of carbon alteration (ICAs) focused on methane. ICAs were chosen to reflect the potential for methane emission along four causal pathways: 1) water column mixing, 2) wet-dry cycles in sediment, 3) sediment redistribution, and 4) vegetation. We developed algorithms to calculate ICAs for three reservoirs along a longitudinal gradient in the Tennessee River basin of the southeast US. The ICAs revealed interesting longitudinal patterns. Indicators of both methane production and destruction increased downstream. The potential for ebullitive methane emissions driven by sub-daily water level fluctuations and emissions mediated by vegetation were higher in downstream mainstem reservoirs than in the upstream tributary reservoir. Along the remaining two pathways, longitudinal patterns were equivocal (sediment pathway) or suggested decreased emissions downstream (water-column mixing). We also observed seasonal patterns and, by combining ICAs, inferred times when ramping could be achieved with lower risk of emissions. The ICAs demonstrated here are the first step in quantifying mechanistic relationships between reservoir operation and methane emissions. In future, they may lead to improved operations in reservoir cascades and regional-scale estimates of emissions that account for differences among reservoirs.

Greenhouse gases↗
DOE OSTI2025

Effect of Networking Density on the Patterning Performance of Molecular Layer Deposited Alucone Electron Beam/EUV Resists

One of the main barriers to continued device scaling in the era of extreme ultraviolet (EUV) lithography is the need for improved photoresist chemistries to address challenges such as poor EUV sensitivity, inadequate etch resistance, and pattern collapse. Metal-organic photoresists are a promising class of materials that can address many of these challenges, and among them, resists deposited via hybrid molecular layer deposition (MLD) have attracted interest for their unique advantages in thickness control, chemical homogeneity, and compatibility with vacuum processing. However, despite many successful demonstrations of patterning, little is known about how the molecular design of hybrid MLD resists affects their lithographic performance. In this work, we study the effect of the network structure, a common feature among all hybrid MLD resists, via a series of aluminum alkoxide ("alucone") negative tone resists with varying networking density. Their patterning mechanism is investigated via electron beam lithography (EBL)─a common proxy for EUV─and compared to their EUV-induced reactions studied via flood exposure and in situ characterization. In conclusion, we show that the resist with the least networking density demonstrates the best sensitivity and resolution, with the ability to resolve dense line/space gratings as small as 14 nm half pitch via EBL.

electron beam lithography↗
DOE OSTI2024

Unique Temperature Trend Pattern Associated With Internally Driven Global Cooling and Arctic Warming During 1980–2022

Abstract Diagnosing the role of internal variability over recent decades is critically important for both model validation and projections of future warming. Recent research suggests that for 1980–2022 internal variability manifested as Global Cooling and Arctic Warming (i‐GCAW), leading to enhanced Arctic Amplification (AA), and suppressed global warming over this period. Here we show that such an i‐GCAW is rare in CMIP6 large ensembles, but simulations that do produce similar i‐GCAW exhibit a unique and robust internally driven global surface air temperature (SAT) trend pattern. This unique SAT trend pattern features enhanced warming in the Barents and Kara Sea and cooling in the Tropical Eastern Pacific and Southern Ocean. Given that these features are imprinted in the observed record over recent decades, this work suggests that internal variability makes a crucial contribution to the discrepancy between observations and model‐simulated forced SAT trend patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Large‐Scale Statistically Meaningful Patterns (LSMPs) Associated With Precipitation Extremes Over Northern California

Abstract We analyze large‐scale statistically meaningful patterns (LSMPs) that precede extreme precipitation (PEx) events over Northern California (NorCal). We find LSMPs by applying k‐means clustering to the two leading principal components of daily 500 hPa geopotential height anomalies two days before the onset, from October to March during 1948–2015. Statistical significance testing based on Monte Carlo simulations suggests a minimum of four statistically distinguished LSMP clusters. The four LSMP clusters are characterized as Northwest continental negative height anomaly, Eastward positive “Pacific‐North American Pattern (PNA),” Westward negative “PNA,” and Prominent Alaskan ridge. These four clusters, shown in multiple variables, evolve very differently and have differing links to the Arctic and tropical Pacific regions. Using binary forecast skill measures and a new copula‐based framework for predicting PEx events, we find LSMP indices that are useful predictors of NorCal PEx events, with moisture‐based variables being the best predictors of PEx events at least 6 days before the onset, and the lower atmospheric variables being better than their upper atmospheric counterparts any day in advance tested. To ensure statistical rigor, the LSMPs analyzed here (with the modified acronym) include local tests of both significance and consistency, which are not always featured in the literature on large‐scale meteorological patterns.

54 ENVIRONMENTAL SCIENCES↗