Search NASA⌕ Search

SEARCH · Search NASA

Results for “Physicochemical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Revisiting the Effects of Seed Liquid Water Content on Isoprene Secondary Organic Aerosol Growth

Aerosol liquid water content (LWC) has been shown to enhance partitioning of water-soluble oxygenated organic vapors into the aerosol particles and facilitate aqueous chemistry, impact SOA formation, composition, and physicochemical properties. Here, this study examines the effect of aerosol liquid water content (LWC) on isoprene SOA formation using effloresced and deliquesced ammonium sulfate ((NH 4 ) 2 SO 4 ) and sodium chloride (NaCl) seed particles in an environmental chamber with photo-oxidation extending over hours under moderate relative humidity (50%-60%). Our findings indicate that isoprene SOA mass yield is not significantly influenced (p value >> 0.05) by the phase state or the chemical identity of the seed particles within a 3–4-hour reaction time scale. Detailed molecular analysis using advanced high resolution mass spectrometry indicates that while both effloresced and deliquesced seed types produced similar molecular formula distributions, deliquesced (NH 4 ) 2 SO 4 slightly favored the production of less volatile compounds. Depth-profiling analysis by single particle mass spectrometry confirmed that isoprene SOA predominantly located on the surfaces of particles with core-shell morphologies, with partial dissolution of the effloresced inorganic salt observed even below the deliquescence relative humidity (DRH) of salt. This finding suggests that assuming dry salt core particles do not interact with SOA coatings, based on salt deliquescence points, may overlook important aqueous chemistry. These results emphasize the critical role of reaction time scale and mixing state on SOA formation and call for further research to understand LWC effects on SOA from different precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Resolving Nanoscopic and Mesoscopic Heterogeneity of Fluorinated Species in Battery Solid-Electrolyte Interphases by Cryogenic Electron Microscopy

The stability of lithium batteries is tied to the physicochemical properties of the solid-electrolyte interphase (SEI). Owing to the difficulty in characterizing this sensitive interphase, the nanoscale distribution of SEI components is poorly understood. Here, we use cryogenic scanning transmission electron microscopy (cryo-STEM) to map the spatial distribution of SEI components across the metallic Li anode. We reveal that LiF, an SEI component widely believed to play an important role in battery passivation, is absent within the compact SEI film (~15 nm); instead, LiF particles (100–400 nm) precipitate across the electrode surface. We term this larger length scale as the indirect SEI regime. On the basis of these observations, we conclude that LiF cannot be a dominant contribution to anode passivation nor does it influence Li+ transport across the compact SEI film. We refine the traditional SEI structure derived from ensemble-averaged characterizations and nuance the role of SEI components on battery performance.

25 ENERGY STORAGE↗
DOE OSTI2026

Assessing Structural, Thermal, and Functional Characteristics of Marigold Flower Protein as a Sustainable Food Ingredient

The demand for sustainable and alternative protein sources has been on the rise, driving interest in the valorization of underutilized plants. This study evaluated Calendula officinalis (marigold), a common floral waste, as a sustainable alternative protein source for the food industry. The primary objective of this study was to investigate the physicochemical properties of protein fractions from Calendula officinalis flower to evaluate their potential as a novel protein ingredient. Extraction of the Calendula officinalis flower yielded 92.17% of the crude protein. A sequential extraction of albumin, globulin, glutelin, and prolamin from marigold flower revealed albumin as the dominant fraction (65.47%) and exhibited the highest protein functionality, including water-holding capacity (2.37 g/g), oil-holding capacity (2.49 g/g), and emulsifying capacity (65.22 mL/g). Compared with other protein fractions, glutelin showed a relatively high emulsifying and foaming capacity (EC: 59.13 mL/g; FC: 16.23%). Differential scanning calorimetry revealed high thermal stability for albumin (T p = 105.28 °C) and glutelin (T p = 97.6 °C). Sodium Dodecyl Sulfate–Polyacrylamide Gel Electrophoresis (SDS-PAGE) and Liquid Chromatography–Mass Spectrometry (LC-MS) confirmed the presence of abundant low-molecular-weight polypeptides (<37 kDa), which enhanced emulsification, while scanning electron microscopy revealed porous structures aligned with hydration properties. Antioxidant activity was higher in albumin and glutelin, linked to surface hydrophobicity. LC-MS/MS identified 33 short-chain proteins, including oxidoreductase proteins and lipid-transfer proteins. Findings highlight marigold flower proteins as a sustainable, functional ingredient for a diverse range of food applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Enzymatic Activity of Inosine 5'-Monophosphate Dehydrogenase May Not Be a Vulnerable Target for Staphylococcus aureus Infections

Many bacterial pathogens, including Staphylococcus aureus, require inosine 5'-monophosphate dehydrogenase (IMPDH) for infection, making this enzyme a promising new target for antibiotics. Although potent selective inhibitors of bacterial IMPDHs have been reported, relatively few have displayed antibacterial activity. Here we use structure-informed design to obtain inhibitors of S. aureus IMPDH (SaIMPDH) that have potent antibacterial activity (minimal inhibitory concentrations less than 2 μM) and low cytotoxicity in mammalian cells. The physicochemical properties of the most active compounds were within typical Lipinski/Veber space, suggesting that polarity is not a general requirement for achieving antibacterial activity. In this work, five compounds failed to display activity in mouse models of septicemia and abscess infection. Inhibitor-resistant S. aureus strains readily emerged in vitro. Resistance resulted from substitutions in the cofactor/inhibitor binding site of SaIMPDH, confirming on-target antibacterial activity. These mutations decreased the binding of all inhibitors tested, but also decreased catalytic activity. Nonetheless, the resistant strains had comparable virulence to wild-type bacteria. Surprisingly, strains expressing catalytically inactive SaIMPDH displayed only a mild virulence defect. Collectively these observations question the vulnerability of the enzymatic activity of SaIMPDH as a target for the treatment of S. aureus infections, suggesting other functions of this protein may be responsible for its role in infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

100th Anniversary of Macromolecular Science Viewpoint: Fundamentals for the Future of Macromolecular Nitroxide Radicals

Macromolecular radicals, radical polymers, and polyradicals bear unique functionalities derived from their pendant radical groups. Here, the increasing need for organic functional materials is driving the growth in research interest in macromolecular radicals for batteries, electronics, memory, and imaging. This Viewpoint summarizes the current state-of-knowledge regarding the macromolecular nitroxide radicals’ redox mechanism, conductivity, chain conformation, controlled polymerization, network structure, conjugated forms, and applications. The nitroxide radical group is the focus because it is the most widely studied. Although most literature focuses upon applications, an emerging body of work is highlighting the fundamental physicochemical properties of macromolecular radicals. To this end, this Viewpoint recommends areas of opportunity in fundamental studies and best practices in reporting.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Porous Liquids as Electrolyte: A Case Study of Li + and Mg 2+ Ion Transport in Crown Ether-Based Type-II Porous Liquids

Here, we demonstrate crown ether (CE)-based type II porous liquid (PL) electrolytes in which CEs provide internal porosity and are capable of coordinating with Li + and Mg 2+ ions. We investigated the physicochemical properties of the PL electro-lytes with different functional groups and cavity sizes. Among the electrolytes studied, the 12-crown-4 (12C4)-based PL electrolyte exhibited the most enhanced ionic conductivity due to size match between the CE cavity and the Li + ion. Nu-clear magnetic resonance and Fourier transform infrared analyses revealed that addition of CEs reduces the Li + ion–solvent interaction, resulting in the formation of Li-CE complexes. The simulation study clearly showed that the solvated Li + and Mg 2+ ions form complexes with 12C4. The strategy described here using CE-based PLs should be applicable to the design versatile electrolytes for various metal-ion batteries.

Shin, Sun Hae Ra↗
DOE OSTI2026

Discrimination of Hexane Isomers by Temperature Swing Adsorption in a Rigid Aluminum Metal–Organic Framework

The efficient separation of alkane isomers with similar physicochemical properties remains a persistent challenge for the petrochemical industry. Adsorptive separation using metal− organic frameworks (MOFs) offers an energy-efficient alternative to conventional distillation. Herein, we report temperature swing discrimination of hexane isomers with different degrees of branching using MIL-120, a rigid aluminum pyromellitate-based MOF. MIL-120 features uniform one-dimensional channels with an aperture of ∼5.5 Å. At 30 °C, it selectively adsorbs linear and monobranched hexanes while excluding the dibranched isomer. Upon heating to 120 °C, both mono- and dibranched isomers are completely excluded, whereas linear hexane remains strongly adsorbed. Breakthrough experiments validate the temperature swing separation performance. Adsorption heat analysis combined with ab initio calculations provides a quantitative measure of distinct differences in adsorption enthalpies, binding energies, and diffusion barriers responsible for the observed separation efficiency, highlighting the potential of this MOF for efficient separation of alkane isomers via temperature swing adsorption.

Adsorption↗
DOE OSTI2024

Stabilized Oxygen Vacancy Chemistry toward High-Performance Layered Oxide Cathodes for Sodium-Ion Batteries

Anionic redox has emerged as a transformative paradigm for high-energy layered transition-metal (TM) oxide cathodes, but it is usually accompanied by the formation of anionic redox-mediated oxygen vacancies (OVs) due to irreversible oxygen release. Additionally, external factor-induced OVs (defined as intrinsic OVs) also play a pivotal role in the physicochemical properties of layered TM oxides. However, an in-depth understanding of the interplay between intrinsic and anionic redox-mediated OVs and the corresponding regulation mechanism of the dynamic evolution of OVs is still missing. Herein, we disclose the strong interrelationship between these OVs and demonstrate that the presence of intrinsic OVs in the TMO2 layers could induce weak integrity of the TM-O frameworks and unlock additional diffusion paths to trigger the generation and migration of anionic redox-mediated OVs. Accordingly, an OV stabilization strategy is proposed by deliberately introducing high-valence Nb5+, which could serve as an important building block in anchoring the oxygen sublattice and preventing the formation of a percolating OV migration network, thereby suppressing the formation/diffusion of anionic redox-mediated OVs. Consequently, superb structural integrity and improved electrochemical performance with reversible anionic redox chemistry are achieved. This work advances our understanding of the role of OVs for developing high-performance energy storage systems utilizing anionic redox.

anionic redox↗
DOE OSTI2024

π-Extended Porphyrin–Phthalocyanine Heterojunction Devices Exhibiting High Ammonia Sensitivity with a Remarkable Light Effect

π-Extended porphyrins represent an attractive class of organic compounds because of their unique photophysical, optoelectronic, and physicochemical properties. Herein, cross-conjugated (Ace-PQ-Ni) and linear-conjugated (AM6) porphyrins are used to build double-layer heterojunction devices by combining them with a lutetium bisphthalocyanine complex (LuPc 2 ). The heterojunction effect at the porphyrin–phthalocyanine interface plays a key role in the charge transport properties. Both devices exhibit exceptionally high ammonia sensitivity at room temperature and under ambient relative humidity, with limit of detection values of 156 and 115 ppb for Ace-PQ-Ni/LuPc 2 and AM6/LuPc 2 sensors, respectively. Interestingly, the Ace-PQ-Ni/LuPc 2 and AM6/LuPc 2 sensors display opposite effects upon light illumination. While the former sensors show largely decreased ammonia sensitivity under light illumination, the current variation of the latter under ammonia is remarkably enhanced with a multiplication factor of 13 and a limit of detection (LOD) of 83 ppb. Here, the striking difference in their sensing properties upon light illumination is attributed to their different π-conjugation pathways (cross-conjugation versus linear conjugation).

conductometric transducer↗
DOE OSTI2024

Advances in Engineering Nucleotide Sugar Metabolism for Natural Product Glycosylation in Saccharomyces cerevisiae

Glycosylation is a ubiquitous modification present across all of biology, affecting many things such as physicochemical properties, cellular recognition, subcellular localization, and immunogenicity. Nucleotide sugars are important precursors needed to study glycosylation and produce glycosylated products. Saccharomyces cerevisiae is a potentially powerful platform for producing glycosylated biomolecules, but it lacks nucleotide sugar diversity. Nucleotide sugar metabolism is complex, and understanding how to engineer it will be necessary to both access and study heterologous glycosylations found across biology. This review overviews the potential challenges with engineering nucleotide sugar metabolism in yeast from the salvage pathways that convert free sugars to their associated UDP-sugars to de novo synthesis where nucleotide sugars are interconverted through a complex metabolic network with governing feedback mechanisms. Finally, recent examples of engineering complex glycosylation of small molecules in S. cerevisiae are explored and assessed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Solvent Screening for Separation Processes Using Machine Learning and High-Throughput Technologies

As the chemical industry shifts toward sustainable practices, there is a growing initiative to replace conventional fossil-derived solvents with environmentally friendly alternatives such as ionic liquids (ILs) and deep eutectic solvents (DESs). Artificial intelligence (AI) plays a key role in the discovery and design of novel solvents and the development of green processes. This review explores the latest advancements in AI-assisted solvent screening with a specific focus on machine learning (ML) models for physicochemical property prediction and separation process design. Additionally, this paper highlights recent progress in the development of automated high-throughput (HT) platforms for solvent screening. Finally, this paper discusses the challenges and prospects of ML-driven HT strategies for green solvent design and optimization. To this end, this review provides key insights to advance solvent screening strategies for future chemical and separation processes.

Artificial intelligence↗
DOE OSTI2021

Defect Termination in the UiO-66 Family of Metal–Organic Frameworks: The Role of Water and Modulator

The defect concentration in the prototypical metal–organic framework UiO-66 can be well controlled during synthesis, leading to precisely tunable physicochemical properties for this structure. However, there has been a long-standing debate regarding the nature of the compensating species present at the defective sites. Here, we present unambiguous spectroscopic evidence that the missing-linker defect sites in an ambient environment are compensated with both carboxylate and water (bound through intermolecular hydrogen bonding), which is further supported by ab initio calculations. In contrast to the prevailing assumption that the monocarboxylate groups (COO – ) of the modulators form bidentate bonding with two Zr 4+ sites, COO – is found to coordinate to an open Zr 4+ site in an unidentate mode. The neighboring Zr 4+ site is terminated by a coordinating H 2 O molecule, which helps to stabilize the COO – group. Lastly, this finding not only provides a new understanding of defect termination in UiO-66, but also sheds light on the origin of its catalytic activity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recombination of Autodissociated Water Ions in a Nanoscale Pure Water Droplet

The recombination of water ions has diverse scientific and practical implications, ranging from acid-base chemistry and biological systems to planetary environments and applications in fuel cell and carbon conversion technologies. While spatial confinement affects the physicochemical properties of water dynamics, its impact on the recombination process has rarely been studied. In this work, we investigate the dynamics of water, the water ion distribution, and the ion recombination process in water droplets as a function of droplet size through molecular dynamics simulations and adaptive quantum mechanical/molecular mechanical calculations. We compare the dynamics of recombination in water droplet sizes ranging from 100 to 18 000 waters, both in their interiors and on their surfaces. We found that the self-diffusion of water dramatically decreases in droplets with a diameter below 2.2 nm. Using a classical RexPoN force-field, we found that the ions in 1000 H2O's spend almost 50% of the time on the surface and 0.5 nm beneath it with a slight preference for OH- ion to reside longer on the surface. We estimate that, on average, recombination in these drops occurs at 400 ps in 1000 H2O's and 1 ns in 3000 H2O's. We also found that recombination is not limited by the local structure of the surface or the size of the droplet but can be influenced by the geometry of the water wire connecting the ions as they approach each other, which can often prevent recombination. Our results provide insights to the reaction microenvironments presented by nanoscopic water droplets.

Kwon, Soonho↗
DOE OSTI2025

Mechanochemical Solid Form Screening of Zeolitic Imidazolate Frameworks Using Structure-Directing Liquid Additives

We demonstrate a systematic application of the mechanochemical liquid-assisted grinding (LAG) methodology to screen for forms of zinc imidazolate (ZnIm 2 ), of fundamental importance as the simplest member of the zeolitic imidazolate framework materials family. The exploration of 45 different liquid additives, selected based on their molecular structure and physicochemical properties has resulted in eight different ZnIm 2 topological forms, appearing in 13 crystallographically distinct solid forms (including two previously unknown forms of the crb (BCT) topology), amorphous phases, and the interrupted moc-Zn 4 Im 8 HIm. All prepared topological forms were also explored computationally, using dispersion-corrected periodic density functional theory (DFT) calculations, enabling the rationalization of screening outcomes, and setting the stage for future prediction of additive-directed metal–organic framework (MOF) synthesis. This first systematic exploration of LAG in screening for three-dimensional MOFs demonstrates the potential of the liquid additive to not only accelerate materials synthesis, but also to direct it toward topologically different MOFs. The discovery of novel forms of a material that already exhibits at least 21 crystallographically and functionally different forms provides a strong testimony on the power of mechanochemistry in metal–organic materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tuning Solid Electrolyte Interphase Formation before Plating Onset in Anode-Free Sodium Batteries

Sodium (Na) batteries are of growing interest due to the higher earth abundance of sodium than lithium, as well as their promising theoretical energy density when metallic Na anodes are used. However, Na plating and stripping are heavily influenced by the physicochemical properties of the solid electrolyte interphase (SEI), which is directly influenced by the solvent and salt used for the electrolyte. While most studies focus on the SEI that forms on the surface of Na metal after plating, we expand this analysis by identifying a nanoscale “pre-plating” SEI that forms on the current collector (CC) prior to the onset of Na plating. Here, we systematically investigate an array of Na salt and glyme solvents in the electrolyte and determine the associated impacts on pre-plating SEI formation on aluminum CCs. By combining analytical electrochemistry approaches with a multimodal suite of spectroscopy techniques (X-ray, infrared, and Raman), supported by density functional theory calculations, we reveal a direct correlation between the Na + coordination environment and pre-plating SEI composition. We find that longer-chain glymes produce larger proportions of organic alkoxide products in the interphase, consistent with increased Na + −glyme interactions, while the fraction of salt-derived inorganic products (e.g., NaF) correlates with Na + −anion coordination. These insights highlight the critical influence of electrolyte composition particularly solvent identity and Na + coordination on the initial SEI formation in anode-free Na batteries.

anode-free batteries↗
DOE OSTI2024

Capturing the Relative‐Humidity‐Sensitive Gas–Particle Partitioning of Organic Aerosols in a 2D Volatility Basis Set

Abstract Aerosol water affects the physicochemical properties and mass concentration of organic aerosols (OA), but it is typically omitted by air quality, weather, and climate models. We compare two classes of simplified models to estimate the OA water uptake and gas–particle partitioning of organic compounds. One class uses a single‐hygroscopicity‐parameter (κ) approach while the other is based on the reduced‐complexity Binary Activity Thermodynamics (BAT) model. We show that a BAT‐based two‐dimensional volatility basis set (VBS) model always predicts a higher OA mass concentration at elevated relative humidity (RH), for example, ∼16% at 80% RH, than any variation of theκ‐based method considered—even when BAT‐VBS predicts a lower water uptake. The main reason being that the BAT‐VBS model captures variations in effective saturation mass concentration of organics (C*) with RH, a feature that other VBS methods lack. The BAT‐VBS framework offers an efficient, RH‐sensitive treatment for reduced‐complexity OA modeling.

Geology↗
DOE OSTI2026

Soil Organic Matter Stabilization by Polyvalent Cations in a Buried Alkaline Soil

Buried paleosols can store large quantities of organic carbon (C), much of which persists for millennia due to isolation from surface processes that promote decomposition. Subsoil organic matter (SOM) persistence is often enhanced by mineral associations and ionic conditions—particularly high clay content and polyvalent cations—that limit microbial degradation and leaching. However, the vulnerability of these deep C stocks under erosion or environmental change remains poorly understood. This study investigates controls on SOM stabilization in the Brady paleosol and overlying modern soils across contrasting geomorphic settings in the Great Plains of Nebraska where Late Quaternary loess deposition and erosion created a sequence of buried and exposed paleosols. We sampled soils along burial and erosional toposequences and analyzed their physicochemical properties and radiocarbon‐based persistence of occluded particulate organic matter (oPOM) and mineral fractions (MF). Brady paleosol showed greater persistence (lower Fm) of oPOM and MF than modern soils, particularly under burial. This was linked to higher silt and clay content, elevated electrical conductivity, and increased exchangeable calcium and magnesium content, supporting roles for organo‐mineral interactions, flocculation, and carbonate cementation. In modern soils, SOM persistence and C content were more strongly tied to pH and cation exchange capacity. Erosional exposure reduced SOM stability and promoted geochemical convergence toward modern surface soils. These findings show that burial enhances SOM persistence via multiple stabilization mechanisms, while erosion increases subsoil C vulnerability. Our results underscore the importance of geomorphic and geochemical context in predicting soil C stability under environmental change.

Environmental sciences↗