Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarized spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Identifying the Molecular Edge Termination of Exfoliated Hexagonal Boron Nitride Nanosheets with Solid-State NMR Spectroscopy and Plane-Wave DFT Calculations

Hexagonal boron nitride nanosheets (h-BNNS), the isoelectronic analog to graphene, have received interest over the past decade due to their high thermal oxidative resistance, high bandgap, catalytic activity, and low cost. The functional groups that terminate boron and nitrogen zigzag and/or armchair edges directly affect their chemical, physical, and electronic properties. However, an understanding of the molecular edge termination present in h-BNNS is lacking. Here, high-resolution magic-angle spinning (MAS) solid-state NMR (SSNMR) spectroscopy, and plane-wave density-functional theory (DFT) calculations are used to determine the molecular edge termination in exfoliated h-BNNS. 1 H → 11 B cross-polarization MAS (CPMAS) SSNMR spectra of h-BNNS revealed multiple hydroxyl/oxygen coordinated boron edge sites that were not detectable in direct excitation experiments. A dynamic nuclear polarization (DNP)-enhanced 1 H → 15 N CPMAS spectrum of h-BNNS displayed four distinct 15 N resonances while a 2D 1 H{ 14 N} dipolar-HMQC spectrum acquired with fast MAS revealed three distinct 14 N environments. Plane-wave DFT calculations were used to construct model edge structures and predict the corresponding 11 B, 14 N and 15 N SSNMR spectra. Comparison of the experimental and predicted SSNMR spectra confirms that zigzag and armchair edges with both amine and boron hydroxide/oxide termination are present. The detailed characterization of h-BNNS molecular edge termination will prove useful for many material science applications. The techniques outlined here should also be applicable to understand the molecular edge terminations in other 2D materials

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triacetic Acid Lactone and 4-Hydroxycoumarin as Bioprivileged Molecules for the Development of Performance-Advantaged Organic Corrosion Inhibitors

Biomass conversion, especially the development of bioprivileged molecules utilizing integration of biological and chemical processes, has shown potential to produce novel chemicals with enhanced properties. Here, organic corrosion inhibitors based on triacetic acid lactone and 4-hydroxycoumarin have been synthesized in good yield and tested for corrosion inhibition on mild steel in both sulfuric acid and hydrochloric acid. Sixteen novel corrosion inhibitors derived from triacetic acid lactone and 4-hydroxycoumarin were efficiently synthesized and twelve of them showed high corrosion inhibition efficiency as confirmed by electrochemical impedance spectroscopy (giving values greater than 78%) and polarization analysis. While triacetic acid lactone-based compounds showed good corrosion inhibition performance, the 4-hydroxycoumarin-based compounds showed further improvement in corrosion inhibition performance. Scanning electron microscopy (SEM) analysis of the mild steel coupon in the presence of selected inhibitors showed that corrosion was significantly diminished, with complementary X-ray photoelectron spectroscopy (XPS) analysis suggesting the inhibitor molecules strongly adsorbed on the steel surface. Quantum chemical calculations showed poor correlation between calculated parameters and the performance of these molecules. This large set of corrosion inhibitors containing a dozen promising corrosion inhibitors is useful for future rational design of corrosion inhibitors. In conclusion, the results demonstrate a new direction for the development of bioprivileged molecules.

09 BIOMASS FUELS↗

Revisiting the Anisotropic Complex Refractive Indices of Sodium Nitrate for Interpretation of the Reflectance Spectrum of Pressed Pellets

Reflectance spectroscopy is notoriously confounding in that the measured spectral response is highly dependent upon the morphology of the sample. Fortunately, all such perturbations are neatly encoded by the complex refractive index of the sample. Herein, we seek to quantitatively model the measured infrared reflectance spectrum of a specularly flat pressed pellet sample of the birefringent compound, sodium nitrate. Single crystals of sodium nitrate were synthesized via a slow evaporation process and spectroscopically analyzed using polarization-dependent infrared single-angle reflectance spectroscopy. The anisotropic complex refractive index was measured from 7500 to 300 cm-1 (1.33 to 33.33 µm). The deduced anisotropic optical constants were found to be consistent with those previously reported. Once measured and validated, the optical constants were applied to model the pressed pellet reflectance spectrum. It was evident that an average of the anisotropic refractive indices was insufficient to account for the measured pellet reflectance. In order to account for contributions of all possible microcrystalline orientations within the pellet, the Python package PYELLI was used to calculate a basis set of orientation-dependent reflection spectra spanning the distinct ? and ? Euler rotations of the uniaxial crystal. When the population of orientations was allowed to vary freely in a spectral fit analysis, the fit-deduced orientations were tightly clustered along f = 45º, hinting at residual anisotropy in the pressed pellet sample. Conversely, an equally valid spectral fit (with marginally worse fit metric) was obtained when the population was constrained to an isotropic distribution of orientations. Subsequent non-zero cross-polarization reflectance measurements likewise suggested anisotropy in the pellet. However, both grazing incidence wide-angle x-ray scattering and scanning electron microscopy measurements revealed that the microcrystal orientations at the surface of the pressed pellet sample were isotropically distributed (and that the average crystallite size was larger than ?/10). Application of the measured complex refractive indices for modeling the reflectance spectrum of the pressed pellet, and rectification of these seemingly contradictory observations will be discussed.

Wilhelm, Michael J.↗

Scalable Hyperpolarized MRI Enabled by Ace‐SABRE of [1‐ 13 C]Pyruvate

Abstract Hyperpolarized (HP) MRI using [1– 13 C]pyruvate is emerging as a promising molecular imaging approach. Among hyperpolarization methods, Signal Amplification By Reversible Exchange (SABRE) is attractive because SABRE polarizes the substrates directly in room‐temperature solutions avoiding complex hardware. Most SABRE experiments have historically been performed in methanol, a relatively toxic and difficult‐to‐remove solvent. Here we demonstrate the use of a 80/20 acetone/water (A/W) solvent system (Ace‐SABRE) to provide hyperpolarized [1– 13 C]pyruvate with up to 17% polarization, then implement a solvent processing protocol to achieve injectable solutions retaining 74% of the initial polarization, and lastly we demonstrate HP in vivo spectroscopy and imaging using the Ace‐SABRE platform to showcase metabolic tracking in a hepatocellular carcinoma (HCC) tumor as well as HP‐MRI, both in direct comparison to dissolution dynamic nuclear polarization (d‐DNP) experiments. The Ace‐SABRE technique promises faster adoption of SABRE hyperpolarization in biological experiments, overall lowering the barriers to entry for HP‐NMR and HP‐MRI.

Chemistry↗

Supported Electrophilic Organoruthenium Catalyst for the Hydrosilylation of Olefins

A series of supported electrophilic organoruthenium complexes has been synthesized via surface organometallic chemistry (SOMC) techniques and applied to the selective hydrosilylation of olefins. The air-sensitive 16e - complex Cp*RuMes(PCy 3 ) (1) (Cp* = pentamethylcyclopentadienyl, Mes = mesityl) was synthesized by the treatment of Cp*RuCl(PCy 3 ) with mesityl Grignard MesMgBr. This species was chemisorbed onto sulfated zirconia SO 4 /ZrO 2 , but the resulting material was inactive toward cyclohexene hydrosilylation with phenylsilane. Instead, Cp*RuMes(PCy 3 ) was treated with phenylsilane (PhSiH 3 ) to provide a ruthenium disilyl hydride complex Cp*RuH(SiH 2 Ph) 2 (PCy 3 ) (3), which was fully characterized by NMR spectroscopy and single-crystal X-ray diffraction. Grafting this species onto SO 4 /ZrO 2 resulted in the formation of phenylsilane along with the surface electrophilic species [Cp*RuH(R)(X-SiHPh)(PCy 3 )] (R = H, O 3 S-O or O 3 Zr-O; 4a, 4b, X = O 3 S-O, and O 3 Zr-O, respectively) as the major species. Material 4 was characterized via a combination of spectroscopic techniques including dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray absorption spectroscopy (XAS), and density function theory (DFT) calculations. Further, capping the remaining acid sites on 4 with Me 3 Si-SiMe 3 provides 5, which significantly reduces side reactions, such as olefin isomerization and silane redistribution. Catalyst 5 is a highly robust and selective hydrosilylation catalyst and can be recycled up to 5 times without significant diminishment of activity. Exclusive anti-Markovnikov regiochemistry, cis-addition selectivity, and the inactivity of secondary and tertiary silanes provide support for the proposed Glaser-Tilley mechanism involving cationic ruthenium silylene species analogous to homogeneous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale solid-state nuclear quadrupole resonance spectroscopy using depth-optimized nitrogen-vacancy ensembles in diamond

Nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) spectroscopy of bulk quantum materials have provided insight into phenomena, such as quantum phase criticality, magnetism, and superconductivity. With the emergence of nanoscale 2D materials with magnetic phenomena, inductively detected NMR and NQR spectroscopy are not sensitive enough to detect the smaller number of spins in nanomaterials. The nitrogen-vacancy (NV) center in diamond has shown promise in bringing the analytic power of NMR and NQR spectroscopy to the nanoscale. However, due to depth-dependent formation efficiency of the defect centers, noise from surface spins, band bending effects, and the depth dependence of the nuclear magnetic field, there is ambiguity regarding the ideal NV depth for surface NMR of statistically polarized spins. In this work, we prepared a range of shallow NV ensemble layer depths and determined the ideal NV depth by performing NMR spectroscopy on statistically polarized 19 F in Fomblin oil on the diamond surface. We found that the measurement time needed to achieve a signal-to-noise ratio of 3 using XY8-N noise spectroscopy has a minimum at an NV ensemble depth of 5.5 ± 1.5 nm for ensembles activated from 100 ppm nitrogen concentration. To demonstrate the sensing capabilities of NV ensembles, we perform NQR spectroscopy on the 11 B of hexagonal boron nitride flakes. We compare our best diamond to previous work with a single NV and find that this ensemble provides a shorter measurement time with excitation diameters as small as 4 μm. Furthermore, this analysis provides ideal conditions for further experiments involving NMR/NQR spectroscopy of 2D materials with magnetic properties.

2D materials↗

Anisotropic Raman Scattering and Lattice Orientation Identification of 2M-WS 2

Anisotropic materials with low symmetries hold significant promise for next-generation electronic and quantum devices. 2M-WS 2 , which is a candidate for topological superconductivity, has garnered considerable interest. However, a comprehensive understanding of how its anisotropic features contribute to unconventional superconductivity, along with a simple, reliable method to identify its crystal orientation, remains elusive. Here, we combine theoretical and experimental approaches to investigate angle- and polarization-dependent anisotropic Raman modes of 2M-WS 2 . Through first-principles calculations, we predict and analyze the phonon dispersion and lattice vibrations of all Raman modes in 2M-WS 2 . We establish a direct correlation between their anisotropic Raman spectra and high-resolution transmission electron microscopy images. Finally, we demonstrate that anisotropic Raman spectroscopy can accurately determine the crystal orientation and twist angle between two stacked 2M-WS 2 layers. Furthermore, our findings provide insights into the electron–phonon coupling and anisotropic properties of 2M-WS 2 , paving the way for the use of anisotropic materials in advanced electronic and quantum devices.

2M-WS2↗

Alignment of Polarization against an Electric Field in van der Waals Ferroelectrics

Polarization in ferroelectrics can be switched in the direction of an applied electric field by dipole reorientation, enabling numerous applications and fundamental phenomena. In this study, we demonstrate that, in the van der Waals (vdW) layered ferrielectric Cu In P 2 S 6 , a unique mechanism exists where polarization aligns against the direction of the applied electric field, seemingly in violation of the fundamental properties of a dipolar solid. The mechanism is the result of the electric field driving the Cu atoms unidirectionally across the vdW gaps, which is distinctively different from dipole reorientation. The crossing of Cu atoms is the fundamental process of ionic conductivity, yet it is compatible with the existence of polarization. These phenomena are confirmed by nanoscale imaging and spectroscopy of ferroelectric capacitors, coupled with dynamic density-functional-theory simulations. The symbiotic relationship of ferroelectric and ionic phenomena enables alternative approaches to control polarization and necessitates a change in perspective on nucleation, domain-wall dynamics, and other ferroelectric and electromechanical characteristics in material systems where ionic and ferroelectric phenomena manifest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure evolution of single-site Pt in a metal–organic framework

Heterogeneous single-metal-site catalyst or single-atom catalyst research has grown rapidly due to the accessibility of modern characterization techniques that can provide invaluable information at the atomic-scale. Herein, we study the structural evolution of isolated single Pt sites incorporated in a metal–organic framework containing bipyridine functional groups using in situ diffuse reflectance infrared Fourier transform spectroscopy with CO as the probe molecule. The structure and electronic properties of the isolated Pt sites are further corroborated by x-ray photoelectron spectroscopy and aberration-corrected scanning transmission electron microscopy. Here, we find the prerequisite of high temperature He treatment for Pt activation and CO insertion and inquire into the structural transformation of Pt site process by dynamic nuclear polarization-enhanced solid-state nuclear magnetic resonance spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design, construction, and test of the Gas Pixel Detectors for the IXPE mission

Due to be launched in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2–8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis—particularly as far as the response to unpolarized radiation and the stability in time are concerned.

79 ASTRONOMY AND ASTROPHYSICS↗

Spontaneous Valley Polarization of Interacting Carriers in a Monolayer Semiconductor

Here, we report magnetoabsorption spectroscopy of gated WSe 2 monolayers in high magnetic fields up to 60 T. When doped with a 2D Fermi sea of mobile holes, well-resolved sequences of optical transitions are observed in both σ ± circular polarizations, which unambiguously and separately indicate the number of filled Landau levels (LLs) in both K and K ' valleys. This reveals the interaction-enhanced valley Zeeman energy, which is found to be highly tunable with hole density p . We exploit this tunability to align the LLs in K and K ' , and find that the 2D hole gas becomes unstable against small changes in LL filling and can spontaneously valley polarize. These results cannot be understood within a single-particle picture, highlighting the importance of exchange interactions in determining the ground state of 2D carriers in monolayer semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for a Singly Strange Hexaquark Using Polarization Data From CLAS12 at Jefferson Lab Virginia

Recently hadron spectroscopy has seen a lot of success. There has been a large number of baryon and meson resonances discovered over the last two decades. There have also been several tetra and pentaquark candidates with experimental evidence but not confirmed. The first serious candidate was the X(3872), a potential tetraquark, leading to this rise in success for exotic hadron physics. This has brought about improvements in Quantum Chromo Dynamics (QCD), our current best description of interactions between quarks and gluons. QCD predicts the existence of hexaquark states, and then the d*(2380) was discovered. This thesis explores the rest of the d* Jp =3+ anti-decuplet by searching for experimental evidence of the ds hexaquark. This is the first analysis of the e'd ¿e'K+d0 s ¿e'K+¿n channel using the Py' measurements of the ¿ as a lens to perform this search. This observable was extracted from ¿ electroproduction events off a liquid deuterium target. From this an upper limit of the Breit-Wigner peak strength was extracted. This was done with the use of the CLAS12 detector system housed at Thomas Jefferson Laboratory in Virginia, USA. These polarization measurements are the first to be made on this data, and this is the first time the ds has been searched for in such a way.

Clash, Geraint↗

Characterization, Structure, and Reactivity of Hydroxyl Groups on Metal‐Oxide Cluster Nodes of Metal–Organic Frameworks: Structural Diversity and Keys to Reactivity and Catalysis

Among the most stable metal–organic frameworks (MOFs) are those incorporating nodes that are metal oxide clusters with frames such as Zr 6 O 8 . This review is a summary of the structure, bonding, and reactivity of MOF node hydroxyl groups, emphasizing those bonded to nodes containing aluminum and zirconium ions. Hydroxyl groups are often present on these nodes, sometimes balancing the charges of the metal ions. They arise during MOF syntheses in aqueous media or in post-synthesis treatments. They are identified with infrared and 1 H nuclear magnetic resonance spectroscopies and characterized by their reactivities with polar compounds such as alcohols. Terminal OH, paired µ 2 -OH, and aqua groups on nodes are catalytic sites in numerous reactions. Relatively unreactive hydroxyl groups (such as isolated µ 2 -OH groups) may replace reactive groups and inhibit catalysis; some node hydroxyl groups (e.g., µ 3 -OH) are mere spectators in catalysis. There are similarities between MOF node hydroxyl groups and those on the surfaces of bulk metal oxides, zeolites, and enzymes, but the comparisons are mostly inexact, and much remains to be understood about MOF node hydroxyl group chemistry. It is posited that understanding and controlling this chemistry will lead to tailored MOFs and improved adsorbents and catalysts.

36 MATERIALS SCIENCE↗

Exploration of fibers produced from petroleum based-mesophase pitch and pet blends for carbon fiber production

Petroleum-derived mesophase pitch and polyethylene terephthalate (PET) were blended and melt-extruded to create precursor fibers. The raw blends, heat treated bulk materials, and fibers were all examined to determine compatibility between petroleum-derived mesophase pitch and PET. Thermal investigation of the raw blends showed the presence of both the pitch and PET in separate phases suggesting no interactions had occurred during mixing. Here, the heat-treated bulk material also showed multiple phases under polarized light while Fourier-transform infrared spectroscopy indicated that the two materials did not fully separate during extrusion. Elemental scans of the precursor fibers showed areas of high oxygen concentrations averaging 11.7% as compared to a 2% oxygen concentration across the majority of the cross-section. Tensile tests of the precursor fibers showed a decrease in average modulus as compared to pure pitch fibers; however, the depressed modulus of the blended fibers was found to be independent of the PET weight percentage. Fibers created from 5 wt.% PET had a strength value within 10% of pure pitch and a 200% increase in modulus and were therefore found to be the most promising for carbon fiber production. Pure pitch and the 5 wt.% PET fibers were stabilized and carbonized to 1000 °C. Both types of fibers were tensile tested to determine their strength and stiffness. Pure pitch carbon fibers maintained a higher strength while the carbon fibers produced from 5 wt.% PET possessed a stiffer modulus which can be attributed to their radial microstructure.

36 MATERIALS SCIENCE↗

Electrically controlling and optically observing the membrane potential of supported lipid bilayers

Supported lipid bilayers are a well-developed model system for the study of membranes and their associated proteins, such as membrane channels, enzymes, and receptors. These versatile model membranes can be made from various components, ranging from simple synthetic phospholipids to complex mixtures of constituents, mimicking the cell membrane with its relevant physiochemical and molecular phenomena. In addition, the high stability of supported lipid bilayers allows for their study via a wide array of experimental probes. In this work, we describe a platform for supported lipid bilayers that is accessible both electrically and optically, and demonstrate direct optical observation of the transmembrane potential of supported lipid bilayers. We show that the polarization of the supported membrane can be electrically controlled and optically probed using voltage-sensitive dyes. Membrane polarization dynamics is understood through electrochemical impedance spectroscopy and the analysis of an equivalent electrical circuit model. In addition, we describe the effect of the conducting electrode layer on the fluorescence of the optical probe through metal-induced energy transfer, and show that while this energy transfer has an adverse effect on the voltage sensitivity of the fluorescent probe, its strong distance dependency allows for axial localization of fluorescent emitters with ultrahigh accuracy. We conclude with a discussion on possible applications of this platform for the study of voltage-dependent membrane proteins and other processes in membrane biology and surface science.

59 BASIC BIOLOGICAL SCIENCES↗

Stress and Curvature Effects in Layered 2D Ferroelectric CuInP 2 S 6

Nanoscale ferroelectric 2D materials offer the opportunity to investigate curvature and strain effects on materials functionalities. Among these, CuInP 2 S 6 (CIPS) has attracted tremendous research interest in recent years due to combination of room temperature ferroelectricity, scalability to a few layers thickness, and ferrielectric properties due to coexistence of 2 polar sublattices. Here, we explore the local curvature and strain effect on polarization in CIPS via piezoresponse force microscopy and spectroscopy. To explain the observed behaviors and decouple the curvature and strain effects in 2D CIPS, we introduce the finite element Landau–Ginzburg–Devonshire model, revealing strong changes in hysteresis characteristics in regions subjected to tensile and compressive strain. The piezoresponse force microscopy (PFM) results show that bending induces ferrielectric domains in CIPS, and the polarization-voltage hysteresis loops differ in bending and nonbending regions. Furthermore, these studies offer insights into the fabrication of curvature-engineered nanoelectronic devices.

2D materials↗

Optimization of La 2 NiO 4+δ Electrolysis Cell Oxygen Electrode through Surfactant-Enabled LaCoO 3±δ Nanocatalyst Deposition

Lanthanum nickelate (LNO) has shown promise as a Cr-resistant air electrode material for SOECs but has suboptimal surface oxygen exchange properties. Nanocoating of the LNO surface with lanthanum cobaltite (LCO) was chosen to improve cell performance as a surface oxygen conductor. The work focused on the implementation of a two-step nano-LCO film deposition utilizing catechol molecules in a porous LNO electrode. The subgoals of the work were to maintain nanosized LCO particles/ grains to increase active surface area and to control the regularity/ homogeneity of the coating across the microstructure. To achieve these goals, a novel surfactant-enhanced liquid infiltration method was utilized, where nucleation sites were spread across the electrode structure to control the location and size of LCO particles. Various catechol surfactant compositions were evaluated for their ability to control the kinetics of nanoparticle deposition and the homogeneity of the coating. Chelated LCO was characterized by X-ray diffraction (XRD), which found a substantial improvement in LCO formation with surfactant addition and determined polymerized norepinephrine to be the best-performing surfactant, with 88.4% pure LCO formed at low temperature. X-ray photoelectron spectroscopy (XPS) confirmed LCO nanostructures formed by the two-step infiltration process, showing no impurities and a stable perovskite structure. Deposition kinetics were analyzed using atomic force microscopy (AFM), correlating infiltration times and solution molarity to nanoparticle size and distribution, the results of which were confirmed in symmetrical cell samples by scanning electron microscopy (SEM). Electrochemical impedance spectroscopy (EIS) testing demonstrated substantial improvements in polarization resistance, where the nanocoating reduced the resistance by ∼55% to 0.152 Ω·cm 2 at 700 °C and 0.039 Ω·cm 2 at 800 °C. Electrical conductivity relaxation (ECR) at this temperature confirmed an improved surface oxygen exchange coefficient of the LCO + LNO heterostructure predicted by the Bode data from EIS, alongside a reduction in activation energy by about 30%.

Deposition↗

Evolution of the Cellulose Microfibril through Gamma-Valerolactone-Assisted Co-Solvent and Enzymatic Hydrolysis

Biomass recalcitrance during deconstruction remains a key bottleneck to affordable biomass processing technologies. A clear connection between the cell wall structure and biomass deconstruction is necessary to understand how lignocellulosic material is broken down to valuable monomeric components. Here, we monitor changes in the cellulose microfibril domains of poplar, sorghum, and switchgrass throughout gamma-valerolactone (GVL)–water co-solvent pretreatment and enzymatic hydrolysis using solid-state 13 C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS 13 C-NMR) and wide-angle X-ray scattering (WAXS). Spectral fitting of NMR peaks corresponding to different cellulose microenvironments at the C 4 carbon center suggests that a mildly acidic GVL–water co-solvent pretreatment of poplar leads to nearly full removal of xylan–cellulose linkages, which primes the cellulose for enzymatic attack. The spectral fitting also suggests that the pretreatment causes significant depletion of the inaccessible fibril surface domains with an increase in more thermally stable crystalline resonances (I β ). WAXS confirmed a decrease in the lattice spacing between (200) crystalline planes with increasing co-solvent pretreatment severity. These results are interpreted as an opening of bound microfibril surfaces previously inaccessible to the co-solvent system, which leaves behind a more thermally stable, crystalline domain that is potentially prone to relaxation and recrystallization. Full conversion of residual GVL-pretreated biomass was achieved after the GVL co-solvent pretreatment at 140 °C using a commercial enzyme cocktail, CTec2, which contains different cellulases and other enzymes. Spectral fitting of enzymatically hydrolyzed samples by a single engineered cellulase, CelR, suggests that the residual cellulose recalcitrance is mainly due to the inability of CelR to digest the I β crystalline domain present in pretreated samples. This work helps to provide new information regarding the structure of the cell wall and recalcitrance throughout GVL–water mild acidolysis and CelR enzymatic biomass deconstruction by tracking the evolution of structural domains within the cellulose microfibril. This work further directs recommendations for improving the conversion and sugar yields in future studies. Finally, our findings inform inquiry into larger questions of cellulose recalcitrance through GVL pretreatment and CelR enzymatic hydrolysis and give insight into subsequent required steps for full cellulose conversion with attention to the most recalcitrant cellulose structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗