Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quality Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

The quest for improved air quality may push China to continue its CO 2 reduction beyond the Paris Commitment

China is challenged with the simultaneous goals of improving air quality and mitigating climate change. The “Beautiful China” strategy, launched by the Chinese government in 2020, requires that all cities in China attain 35 μg/m 3 or below for annual mean concentration of PM 2.5 (particulate matter with aerodynamic diameter less than 2.5 μm) by 2035. Meanwhile, China adopts a portfolio of low-carbon policies to meet its Nationally Determined Contribution (NDC) pledged in the Paris Agreement. Previous studies demonstrated the co-benefits to air pollution reduction from implementing low-carbon energy policies. Pathways for China to achieve dual targets of both air quality and CO 2 mitigation, however, have not been comprehensively explored. Here, we couple an integrated assessment model and an air quality model to evaluate air quality in China through 2035 under the NDC scenario and an alternative scenario (Co-Benefit Energy [CBE]) with enhanced low-carbon policies. Results indicate that some Chinese cities cannot meet the PM 2.5 target under the NDC scenario by 2035, even with the strictest end-of-pipe controls. Achieving the air quality target would require further reduction in emissions of multiple air pollutants by 6 to 32%, driving additional 22% reduction in CO 2 emissions relative to the NDC scenario. Results show that the incremental health benefit from improved air quality of CBE exceeds 8 times the additional costs of CO 2 mitigation, attributed particularly to the cost-effective reduction in household PM 2.5 exposure. The additional low-carbon energy polices required for China’s air quality targets would lay an important foundation for its deep decarbonization aligned with the 2 °C global temperature target.

54 ENVIRONMENTAL SCIENCES↗

Midlatitude Ozone Depletion and Air Quality Impacts from Industrial Halogen Emissions in the Great Salt Lake Basin

We report aircraft observations of extreme levels of HCl and the dihalogens Cl 2 , Br 2 , and BrCl in an industrial plume near the Great Salt Lake, Utah. Complete depletion of O 3 was observed concurrently with halogen enhancements as a direct result of photochemically produced halogen radicals. Observed fluxes for Cl 2 , HCl, and NO x agreed with facility-reported emissions inventories. Bromine emissions are not required to be reported in the inventory, but are estimated as 173 Mg year –1 Br 2 and 949 Mg year –1 BrCl, representing a major uncounted oxidant source. A zero-dimensional photochemical box model reproduced the observed O 3 depletions and demonstrated that bromine radical cycling was principally responsible for the rapid O 3 depletion. Inclusion of observed halogen emissions in both the box model and a 3D chemical model showed significant increases in oxidants and particulate matter (PM 2.5 ) in the populated regions of the Great Salt Lake Basin, where winter PM 2.5 is among the most severe air quality issues in the U.S. The model shows regional PM 2.5 increases of 10%–25% attributable to this single industrial halogen source, demonstrating the impact of underreported industrial bromine emissions on oxidation sources and air quality within a major urban area of the western U.S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NAVIGATING A QUALITY ROUTE TO A NATIONAL SAFETY AWARD

Deming quality methodologies applied to safety are recognized with the National Safety Council's annual Robert W. Campbell Award. Over the last ten years, the implementation of Statistical Process Control and quality methodologies at the U.S. Department of Energy's Hanford Site have contributed to improved safety. Improvements attributed to Statistical Process Control are evidenced in Occupational Safety and Health records and documented through several articles in Quality Progress and the American Society of Safety Engineers publication, Professional Safety. Statistical trending of safety, quality, and occurrence data continues to playa key role in improving safety and quality at what has been called the world's largest environmental cleanup project. DOE's Hanford Site played a pivotal role in the nation's defense beginning in the 1940s, when it was established as part of the Manhattan Project. After more than 50 years of producing material for nuclear weapons, Hanford, which covers 586 square miles in southeastern Washington state, is now focused on three outcomes: (1) Restoring the Columbia River corridor for multiple uses; (2) Transitioning the central plateau to support long-term waste management; and (3) Putting DOE assets to work for the future. The current environmental cleanup mission faces challenges of overlapping technical, political, regulatory, environmental, and cultural interests. From Oct. 1, 1996 through Sept. 30, 2008, Fluor Hanford was a prime contractor to the Department of Energy's Richland Operations Office. In this role, Fluor Hanford managed several major cleanup activities that included dismantling former nuclear-processing facilities, cleaning up the Site's contaminated groundwater, retrieving and processing transuranic waste for shipment and disposal off-site, maintaining the Site's infrastructure, providing security and fire protection, and operating the Volpentest HAMMER Training and Education Center. On October 1,2008, a transition occurred that changed Fluor's role at Hanford. Fluor's work at Hanford was split in two with the technical scope being assumed by the CH2M HILL Plateau Remediation Company (CHPRC) CHPRC is now spearheading much of the cleanup work associated with former nuclear-processing facilities, contaminated groundwater, and transuranic waste. Fluor is an integrated subcontractor to CH PRC in this effort. In addition, at the time of this writing, while the final outcome is being determined for the new Mission Support Contract, Fluor Hanford has had its contract extended to provide site-wide services that include security, fire protection, infrastructure, and operating the HAMMER facility. The emphasis has to be on doing work safely, delivering quality work, controlling costs, and meeting deadlines. Statistical support is provided by Fluor to the PRC, within Fluor Hanford, and to a third contractor, Washington Closure Hanford, which is tasked with cleaning up approximately 210 square miles designated as the Columbia River corridor along the outer edge of the Hanford Site. The closing months of Fluor Hanford's 12 year contract were busy, characterized by special events that capped its work as a prime cleanup contractor, transitions of work scope and personnel, and the completion numerous activities. At this time, Fluor's work and approach to safety were featured in state and national forums. A 'Blockbuster' presentation at the Washington State Governor's Industrial Safety Conference in September 2008 featured Fluor Hanford's Chief Operating Officer, a company Safety Representative, and me. Simultaneously, an award ceremony in Anaheim, Calif. recognized Fluor Hanford as the winner of the 2008 Robert W. Campbell Award. The Robert W. Campbell Award is co-sponsored by Exxon Mobil Corporation and the National Safety Council. Named after a pioneer of industrial safety, the Campbell Award recognizes organizations that demonstrate how integration of environmental, health and safety (EHS) management into business operations is a cornerstone of their corporate success. Fluor Hanford received the award for corporations with more than 1,000 employees. Campbell Award winners undergo rigorous assessments that include site visits and comprehensive evaluations of their commitment to, and implementation of, EHS practices. Award winners work with an international partnership of 21 organizations to develop case studies that illustrate their superior EHS programs and best practices, for use by top business and engineering schools worldwide. Quality methodologies in place at Fluor Hanford played a key role in the award process. Fluor Hanford's integrated use of Statistical Process Control and Pareto Charts for analyzing and displaying EHS performance were viewed favorably by the award judges.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Hydrogen-Bonded Organic Frameworks: A Rising Class of Porous Molecular Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of porous molecular materials that rely on the assembly of organic building blocks by means of hydrogen-bonding interactions to form two-dimensional (2D) and three-dimensional (3D) crystalline networks. The reversible nature of the hydrogen-bond formation endows HOFs with the attributes of solution processability and simple regeneration. High-quality single crystals of HOFs can be grown easily for unambiguous superstructure determination by single-crystal X-ray diffraction, which is crucial for the elucidation of superstructure–property relationships. During the past decade, considerable progress has been achieved in realizing stable HOFs with permanent porosities by focusing on the design of molecular building blocks in order to introduce rigidity, auxiliary [π···π] interactions, and interpenetration of their frameworks to sustain the extended networks. The applications of HOFs are far-reaching, spanning catalysis, energy, and biomedical products as well as the storage and separation of fine chemicals. In this paper, we, first of all, provide an overview of the chronological development of HOFs, starting from the seminal work by Marsh and Duchamp in 1969 on the crystal superstructure of the hydrogen-bonded networks of trimesic acid. We identify the development of novel hydrogen-bonding motifs such as diaminotriazine (DTA), the introduction of the concept of molecular tectonics, and the establishment of permanent porosity in HOFs as being some of the milestones, which incentivized the current burgeoning research endeavors on developing HOFs as multifunctional materials. This Account is focused primarily on surveying the strategies for constructing porous 3D HOFs based on organic building blocks with peripheral carboxyl groups. These strategies are presented in the following categories: (1) the polycatenation of 2D networks by trigonal building blocks to form global 3D frameworks, (2) the utilization of building blocks with 3D geometries—tetrahedral and trigonal prismatic—that are predisposed to form 3D networks, and (3) the docking by shape-fitting of geometrically labile building blocks. We emphasize how the molecular geometry of the building blocks plays an important role in modulating the superstructures of extended frameworks so as to address specific applications. Recognizing that the in silico design of HOFs is the ultimate goal of researchers in this field, we also discuss the recent advances in superstructure prediction that lead to the formation of porous supramolecular crystals and assess the complications in implementing computational methods for HOFs with complex superstructures. We hope this Account will inspire the development of new supramolecular designs and creative approaches to crystal engineering that aid and abet the assembly of multifunctional HOFs with customizable properties.

36 MATERIALS SCIENCE↗

Investigation of photoelectrochemical-oxidized p-GaSb films

GaSb oxide films were directly formed on the p-GaSb films using the bias-assisted photoelectrochemical (PEC) oxidation method. X-ray photoelectron spectroscopy analysis indicated that the resulting GaSb oxide films consisted of Ga{sub 2}O{sub 3}, Sb{sub 2}O{sub 3}, and Sb{sub 2}O{sub 5}. Different from the non-PEC oxides, the PEC derived oxide contained much more Sb{sub 2}O{sub 5} than Sb{sub 2}O{sub 3}. Besides, the interface state density between the PEC oxide and p-GaSb was lower than that of the ordinary oxide/p-GaSb interface. The high quality of the PEC-oxidized GaSb films was attributed to the increase of the stable Sb{sub 2}O{sub 5} content and decrease of the elemental Sb content in the films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preface to special topic: The High Repetition Rate Frontier in High-Energy-Density Physics

High-repetition-rate (HRR) experiments can collect large datasets with high temporal, spatial, and/or parametric resolution or large numbers of repeat measurements for statistics. HRR experiments also enable new experimental designs, including active feedback control loops and novel diagnostics, that can improve the reproducibility as well as the quantity of measurements. Together, these attributes make HRR experiments ideal for performing high-quality repeatable science. Until recently, these techniques have not been applied to high-energy-density–physics (HEDP) experiments, which are typically restricted to repetition rates of a few per day. However, recent advancements in lasers, pulsed-power drivers, target fabrication, and diagnostics are starting to change this fact, opening an exciting new frontier of HRR HEDP experiments. A mini-conference on this subject at the 2021 meeting of the American Physical Society Division of Plasma Physics brought together members of this growing community. As a result, the “High Repetition Rate Frontier in High-Energy-Density Physics” special topic in Physics of Plasmas highlights current progress in this exciting area.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Satellite passive microwave rain measurement techniques for land and ocean

Multiseasonal rainfall was found to be measurable over land with satellite passive microwave data, based upon comparisons between Nimbus 7 Scanning Multichannel Microwave Radiometer (SMME) brightness temperatures (T sub B) and operational WSR-57 radar rain rates. All of the SMMR channels (bipolarized 37, 21, 18, 10.7, and 6.6. GHz T sub B) were compared to radar reflectivities for 25 SMMR passes and 234 radar scans over the U.S. during the spring, summer, and fall of 1979. It was found that the radar rain rates were closely related to the difference between 37 and 21 GHz T sub B. This result is due to the volume scattering effects of precipitation which cause emissivity decreases with frequency, as opposed to emissive surfaces (e.g., water) whose emissivities increase with frequency. Two frequencies also act to reduce the effects of thermometric temperature variations on T sub B to a miminum. During summer and fall, multiple correlation coefficients of 0.80 and 0.75 were obtained. These approach the limit of correlation that can be expected to exist between two very different data sources, especially in light of the errors attributable to manual digitization of PPI photographs of variable quality from various operational weather radar not calibrated for research purposes. During the spring, a significantly lower (0.63) correlation was found. This poorer performance was traced to cases of wet, unvegetated soil being sensed at the lower frequencies through light rain, partly negating the rain scattering signal.

Spencer, R. W.↗

GeoRePORT Protocol Volume II: Geological Assessment Tool

The attributes used by this protocol to describe a geothermal resource include the constraints on the quality of the geothermal resource as well as the technical and socio-economic characteristics that determine whether the heat can be produced. Attributes controlled by the structural, geophysical, geochemical, and hydrological constraints are important in describing the geological grade of a geothermal system. Other attributes important to the feasibility of extracting the geothermal resource due to technical, or socio-economic barriers are addressed in the Technical Assessment Tool and Socio-Economic Assessment Tool documents, respectively.

15 GEOTHERMAL ENERGY↗

Sensor Technologies for Particulate Detection and Characterization

Planned Lunar missions have resulted in renewed attention to problems attributable to fine particulates. While the difficulties experienced during the sequence of Apollo missions did not prove critical in all cases, the comparatively long duration of impending missions may present a different situation. This situation creates the need for a spectrum of particulate sensing technologies. From a fundamental perspective, an improved understanding of the properties of the dust fraction is required. Described here is laboratory-based reference instrumentation for the measurement of fundamental particle size distribution (PSD) functions from 2.5 nanometers to 20 micrometers. Concomitant efforts for separating samples into fractional size bins are also presented. A requirement also exists for developing mission compatible sensors. Examples include provisions for air quality monitoring in spacecraft and remote habitation modules. Required sensor attributes such as low mass, volume, and power consumption, autonomy of operation, and extended reliability cannot be accommodated by existing technologies.

Greenberg, Paul S.↗

Tracking 2020 Decreases in Carbon Dioxide Due to the COVID19 Pandemic in NASA’s GEOS Modeling system: Implications for Space-Based Carbon Monitoring

The COVID19 pandemic led to abrupt, worldwide changes in human activity and related emissions of air pollutants and greenhouse gases that are unprecedented in modern times. NASA satellites have demonstrated their ability to observe some of these impacts, particularly in relation to short-lived gases like nitrogen dioxide (NO2), which is emitted primarily from transportation. Bottom-up analyses of carbon dioxide (CO2) emissions suggest that the growth of atmospheric CO2 has also slowed, but differences are much more subtle than for NO2 because of the lifetime of atmospheric CO2 and sectoral differences in emission reductions. Estimates of CO2 from NASA’s Orbiting Carbon Observatory 2 (OCO-2) provide a unique view of COVID19 impacts, but observed changes in the column-average CO2 can be difficult to interpret because of gaps in spatial coverage. Assimilating these data into the Goddard Earth Observing System (GEOS), an integrated Earth system model with an advanced Constituent Data Assimilation System (CoDAS), helped to reveal changes in CO2 that are consistent with separate, bottom-up analyses of emissions reductions. Both indicate that from February-April of 2020, the growth in CO2 over Europe, North America, and Asia was roughly 0.3 ppm less than during the previous four years. Anomalies derived from gap-filled GEOS OCO-2 CoDAS products contribute to a joint effort by the world’s space agencies to track COVID19 impacts on the Earth. However, attribution of these changes is complicated by interannual variability in atmospheric circulation and the influence of climate on ocean and land carbon sinks. We discuss these results from the perspective of space-based carbon monitoring, which has received considerable support over the past decade from NASA. Our results demonstrate the accomplishments of current sensors and data assimilation systems, but also highlight challenges in providing high quality, low latency information to the public. In particular, understanding and attributing CO2 changes during 2020 requires year-specific information about land and ocean fluxes, which is often delayed for months or even years. We discuss current limitations and potential solutions to address these lags, which would support more reliable and timely space-based carbon monitoring.

COVID-19↗

Making Quality HPGe Gamma Ray Spectrum Measurements for Uranium: The Role of FRAM for Analysis, Quality Control and Enrichment Measurements, and Opportunities for Improved Quantification Documentation

Enrichment measurements are used in uranium safeguards verification and accountancy as both an attribute signature and in the interpretation of other nondestructive assay information, such as active interrogation for mass. Accurate and reliable assessments require quality information. The practices used to collect the raw data are therefore the crucial first step in managing the overall quality and uncertainty of the enrichment determination. This report discusses several topics associated with gamma-ray spectrum measurements of uranium using HPGe detectors. First a discussion of good data acquisition practices including physical setup, detector types and configurations, detector shielding and filtering, spectrum stabilization, and data acquisition protocols. Next is a discussion of analysis options to obtain isotopic composition and/or enrichment centered on the FRAM gamma ray isotopic analysis software. The report discusses the results of the development of a FRAM parameter file to perform classical Enrichment Meter Principle (EMP) analysis. Possible analysis and data acquisition issues (random summing, x-ray fluorescence peaks, peak interferences, shielding) that can affect FRAM analyses are also discussed. There is also a brief discussion of FRAM measurements in the field. Under the topic of uncertainty propagation and quantification in FRAM, uncertainty propagation verification methods and gaps in available uncertainty quantification data for uranium is covered. Suggestions are made for areas where ORNL can contribute to closing the identified uncertainty quantification gaps, and also to contributing nuclear data quality spectra to the research community.

61 RADIATION PROTECTION AND DOSIMETRY↗

Developing Multiphysics, Integrated, High-Fidelity, Massively Parallel Computational Capabilities for Fusion Applications Using MOOSE

As the need for fusion as a clean, sustainable, and abundant energy source grows internationally, so does the need for multiphysics, computational tools to model, study, and predict the complex interactions between plasma, materials, and engineering processes. These tools have a crucial role to play in solving scientific and engineering challenges and accelerating fusion energy deployment. To address these needs, modeling capabilities should enable massively parallel, multiphysics, fully integrated high-fidelity simulations of fusion systems. Additional attributes, such as being open source and modular while maintaining high software quality assurance standards will maximize impact by ensuring accessibility for all and wide acceptance, rapid expansion and development, as well as reliability, efficiency, and robustness. In this paper, we describe how the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework, which has a track record of success in the fission space thanks to the attributes listed above, can be leveraged in the fusion energy field. We highlight key successes of the MOOSE application in the fission space and describe how MOOSE has been and is being applied to fusion applications in the United States---e.g., Tritium Migration Analysis Program, version 8 (TMAP8), MOOSE Fusion Module, Fusion ENergy Integrated multiphys-X (FENIX)---and the United Kingdom---e.g., AURORA, Achlys, Apollo. These efforts aim to establish a suite of tools that can be further extended to accelerate fusion energy deployment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Critical thickness of high structural quality SrTiO{sub 3} films grown on orthorhombic (101) DyScO{sub 3}.

Strained epitaxial SrTiO{sub 3} films were grown on orthorhombic (101) DyScO{sub 3} substrates by reactive molecular-beam epitaxy. The epitaxy of this substrate/film combination is cube on cube with a pseudocubic out-of-plane (001) orientation. The strain state and structural perfection of films with thicknesses ranging from 50 to 1000 {angstrom} were examined using x-ray scattering. The critical thickness at which misfit dislocations was introduced was between 350 and 500 {angstrom}. These films have the narrowest rocking curves (full width at half maximum) ever reported for any heteroepitaxial oxide film (0.0018{sup o}). Only a modest amount of relaxation is seen in films exceeding the critical thicknesses even after postdeposition annealing at 700 C in 1 atm of oxygen. The dependence of strain relaxation on crystallographic direction is attributed to the anisotropy of the substrate. These SrTiO{sub 3} films show structural quality more typical of semiconductors such as GaAs and silicon than perovskite materials; their structural relaxation behavior also shows similarity to that of compound semiconductor films.

36 MATERIALS SCIENCE↗

Historical Perspective on How and Why Switchgrass was Selected as a "Model" High-Potential Energy Crop

A review of several publications of the Biofuels Feedstock Development Program, and final reports from the herbaceous crop screening trials suggests that there were several technical and non-technical factors that influenced the decision to focus on one herbaceous "model" crop species. The screening trials funded by the U.S. Department of Energy in the late 1980's to early 1990's assessed a wide range of about 34 species with trials being conducted on a wide range of soil types in 31 different sites spread over seven states in crop producing regions of the U.S. While several species, including sorghums, reed canarygrass and other crops, were identified as having merit for further development, the majority of institutions involved in the herbaceous species screening studies identified switchgrass as having high priority for further development. Six of the seven institutions included switchgrass among the species recommended for further development in their region and all institutions recommended that perennial grasses be given high research priority. Reasons for the selection of switchgrass included the demonstration of relatively high, reliable productivity across a wide geographical range, suitability for marginal quality land, low water and nutrient requirements, and positive environmental attributes. Economic and environmental assessments by Oak Ridge National Laboratory's Biofuels Feedstock Development Program staff together with the screening project results, and funding limitations lead to making the decision to further develop only switchgrass as a "model" or "prototype" species in about 1990. This paper describes the conditions under which the herbaceous species were screened, summarizes results from those trials, discusses the various factors which influenced the selection of switchgrass, and provides a brief evaluation of switchgrass with respect to criteria that should be considered when selecting and developing a crop for biofuels and bioproducts.

54 ENVIRONMENTAL SCIENCES↗

Assessment of US industry's technology trends and new technology requirements

The utility and effectiveness of a novel approach (the Applications Development, or AD approach), intended to augment the efficiency of NASA's technology utilization (TU) through dissemination of NASA technologies and joint technology development efforts with U.S. industry is tested. The innovative AD approach consists of the following key elements: selection of NASA technologies appearing to have leading edge attributes; interaction with NASA researchers to assess the characteristics and quality of each selected technology; identification of industry's needs in the selected technology areas; structuring the selected technologies in terms of specifications and standards familiar to industry (industrial Spec. Sheets); identification and assessment of industry's interest in the specific selected NASA technologies, utilizing the greatly facilitated communication made possible by the availability of the industrial Spec. Sheets; and matching selected NASA technologies with the needs of selected industries.

Source record↗

Global Premature Mortality Due to Anthropogenic Outdoor Air Pollution and the Contribution of Past Climate Change

Increased concentrations of ozone and fine particulate matter (PM2.5) since preindustrial times reflect increased emissions, but also contributions of past climate change. Here we use modeled concentrations from an ensemble of chemistry–climate models to estimate the global burden of anthropogenic outdoor air pollution on present-day premature human mortality, and the component of that burden attributable to past climate change. Using simulated concentrations for 2000 and 1850 and concentration–response functions (CRFs), we estimate that, at present, 470 000 (95% confidence interval, 140 000 to 900 000) premature respiratory deaths are associated globally and annually with anthropogenic ozone, and 2.1 (1.3 to 3.0) million deaths with anthropogenic PM2.5-related cardiopulmonary diseases (93%) and lung cancer (7%). These estimates are smaller than ones from previous studies because we use modeled 1850 air pollution rather than a counterfactual low concentration, and because of different emissions. Uncertainty in CRFs contributes more to overall uncertainty than the spread of model results. Mortality attributed to the effects of past climate change on air quality is considerably smaller than the global burden: 1500 (−20 000 to 27 000) deaths yr (exp -1) due to ozone and 2200 (−350 000 to 140 000) due to PM2.5. The small multi-model means are coincidental, as there are larger ranges of results for individual models, reflected in the large uncertainties, with some models suggesting that past climate change has reduced air pollution mortality.

human health↗

FCIC Task 5--Preprocessing

the objective of this project is to develop science-based design and operation principles (as informed by TEA and LCA), which result in preprocessing units to operate predictably and reliably, and are capable of scalable performance.

09 BIOMASS FUELS↗

Contrasting changes in ozone during 2019–2021 between eastern and the other regions of China attributed to anthropogenic emissions and meteorological conditions

Ozone pollution is one of the most severe air quality issues in China that poses a serious threat to human health and ecosystems. During 2019–2021, the maximum daily 8-h average ozone concentrations in eastern China (110–122.5°E, 26–42°N) and the rest of China (ROC) show different decreasing patterns, with ozone concentrations in eastern China decreasing by 14.9 μg/m 3 , which is much larger than 4.8 μg/m 3 in ROC. Here, based on two independent methods, the atmospheric chemical transport model (GEOS-Chem) simulations and the machine learning (ML) model (LightGBM) predictions, the reasons for the differences in ozone changes between eastern China and ROC during the warm season (April to September) are investigated. According to the GEOS-Chem (LightGBM) results, changes in the meteorological conditions contributed to an ozone decrease by 7.3 (6.8) μg/m 3 in eastern China due to decreased chemical production and an ozone decrease by 6.8 (7.0) μg/m 3 in ROC attributed to the weakened horizontal and vertical advection. With the influence of meteorological factors excluded, the observations show that changes in anthropogenic emissions resulted in an ozone decrease by 7.6 (8.1) μg/m 3 in eastern China and an ozone increase by 2.0 (2.2) μg/m 3 in ROC, which is primarily induced by the changes in NO x emissions. The surface measurements and satellite retrievals also indicate that the reduction in NO x emissions in ROC is less efficient than that in the more developed eastern China, leading to contrasting changes in ozone concentrations between eastern China and ROC during 2019–2021. In conclusion, our results highlight the critical need to reduce ozone precursor emissions in the rest regions of China apart from eastern China.

54 ENVIRONMENTAL SCIENCES↗