Search NASA⌕ Search

SEARCH · Search NASA

Results for “R value”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Basalt generation at the Apollo 12 site. Part 2: Source heterogeneity, multiple melts, and crustal contamination

The petrogenesis of Apollo 12 mare basalts has been examined with emphasis on trace-element ratios and abundances. Vitrophyric basalts were used as parental compositions for the modeling, and proportions of fractionating phases were determined using the MAGFOX prograqm of Longhi (1991). Crystal fractionation processes within crustal and sub-crustal magma chambers are evaluated as a function of pressure. Knowledge of the fractionating phases allows trace-element variations to be considered as either source related or as a product of post-magma-generation processes. For the ilmenite and olivine basalts, trace-element variations are inherited from the source, but the pigeonite basalt data have been interpreted with open-system evolution processes through crustal assimilation. Three groups of basalts have been examined: (1) Pigeonite basalts-produced by the assimilation of lunar crustal material by a parental melt (up to 3% assimilation and 10% crystal fractionation, with an 'r' value of 0.3). (2) Ilmenite basalts-produced by variable degrees of partial melting (4-8%) of a source of olivine, pigeonite, augite, and plagioclase, brought together by overturn of the Lunar Magma Ocean (LMO) cumulate pile. After generation, which did not exhaust any of the minerals in the source, these melts experienced closed-system crystal fractionation/accumulation. (3) Olivine basalts-produced by variable degrees of partial melting (5-10%) of a source of olivine, pigeonite, and augite. After generation, again without exhausting any of the minerals in the source, these melts evolved through crystal accumulation. The evolved liquid counterparts of these cumulates have not been sampled. The source compositions for the ilmenite and olivine basalts were calculated by assuming that the vitrophyric compositions were primary and the magmas were produced by non-modal batch melting. Although the magnitude is unclear, evaluation of these source regions indicates that both be composed of early- and late-stage Lunar Magma Ocean (LMO) cumulates, requiring an overturn of the cumulate pile.

Neal, Clive R.↗

Fission Product Data Measured at Los Alamos for Fission Spectrum and Thermal Neutrons on {sup 239}Pu, {sup 235}U, {sup 238}U

We describe measurements of fission product data at Los Alamos that are important for determining the number of fissions that have occurred when neutrons are incident on plutonium and uranium isotopes. The fission-spectrum measurements were made using a fission chamber designed by the National Institute for Standards and Technology (NIST) in the BIG TEN critical assembly, as part of the Inter-laboratory Liquid Metal Fast Breeder Reactor (LMFBR) Reaction Rate (ILRR) collaboration. The thermal measurements were made at Los Alamos' Omega West Reactor. A related set of measurements were made of fission-product ratios (so-called R-values) in neutron environments provided by a number of Los Alamos critical assemblies that range from having average energies causing fission of 400-600 keV (BIG TEN and the outer regions of the Flattop-25 assembly) to higher energies (1.4-1.9 MeV) in the Jezebel, and in the central regions of the Flattop-25 and Flattop-Pu, critical assemblies. From these data we determine ratios of fission product yields in different fuel and neutron environments (Q-values) and fission product yields in fission spectrum neutron environments for {sup 99}Mo, {sup 95}Zr, {sup 137}Cs, {sup 140}Ba, {sup 141,143}Ce, and {sup 147}Nd. Modest incident-energy dependence exists for the {sup 147}Nd fission product yield; this is discussed in the context of models for fission that include thermal and dynamical effects. The fission product data agree with measurements by Maeck and other authors using mass-spectrometry methods, and with the ILRR collaboration results that used gamma spectroscopy for quantifying fission products. We note that the measurements also contradict earlier 1950s historical Los Alamos estimates by {approx}5-7%, most likely owing to self-shielding corrections not made in the early thermal measurements. Our experimental results provide a confirmation of the England-Rider ENDF/B-VI evaluated fission-spectrum fission product yields that were carried over to the ENDF/B-VII.0 library, except for {sup 99}Mo where the present results are about 4%-relative higher for neutrons incident on {sup 239}Pu and {sup 235}U. Additionally, our results illustrate the importance of representing the incident energy dependence of fission product yields over the fast neutron energy range for high-accuracy work, for example the {sup 147}Nd from neutron reactions on plutonium. An upgrade to the ENDF library, for ENDF/B-VII.1, based on these and other data, is described in a companion paper to this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the top quark pair production cross section in dilepton final states containing one $\tau$ lepton in pp collisions at $\sqrt{s}=$ 13 TeV

The cross section of top quark pair production is measured in the $\mathrm{t\bar{t}}\to (\ell\nu_{\ell})(\tau_\mathrm{h}\nu_{\tau})\mathrm{b\bar{b}}$ final state, where $\tau_\mathrm{h}$ refers to the hadronic decays of the $\tau$ lepton, and $\ell$ is either an electron or a muon. The data sample corresponds to an integrated luminosity of 35.9 fb$^{-1}$ collected in proton-proton collisions at $\sqrt{s}=$ 13 TeV with the CMS detector. The measured cross section is $\sigma_{\mathrm{t\bar{t}}} =$ 781 $\pm$ 7 (stat) $\pm$ 62 (syst) $\pm$ 20 (lum) pb, and the ratio of the partial width $\Gamma($t$\to\tau\nu_{\tau}$b) to the total decay width of the top quark is measured to be 0.1050 $\pm$ 0.0009 (stat) $\pm$ 0.0071 (syst). This is the first measurement of the $\mathrm{t\bar{t}}$ production cross section in proton-proton collisions at $\sqrt{s}=$ 13 TeV that explicitly includes $\tau$ leptons. The ratio of the cross sections in the $\ell\tau_\mathrm{h}$ and $\ell\ell$ final states yields a value $R_{\ell\tau_\mathrm{h}/\ell\ell}=$ 0.973 $\pm$ 0.009 (stat) $\pm$ 0.066 (syst), consistent with lepton universality.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fabrication and characterization of ferroelectric PLZT film capacitors on metallic substrates.

We have grown ferroelectric Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on Hastelloy C276 (HC) substrates by chemical solution deposition. Samples of 1.15-{micro}m-thick PLZT films were prepared on HC with and without lanthanum nickel oxide (LNO) films as an intermediate buffer layer. On samples with and without LNO buffers at room temperature, we measured dielectric constants of {approx}1,300 and {approx}450 and loss tangents of {approx}0.06 and {approx}0.07, respectively. For PLZT films grown on HC with LNO buffer, the dielectric constant increases, while the dielectric loss decreases, with increasing temperature. A dielectric constant of {approx}2,000 and loss of {approx}0.05 were observed at 150 C. Samples with LNO buffer also exhibited slimmer hysteresis loops and lower leakage current density when compared to samples without LNO buffer. The following results were measured on samples with and without LNO buffers: remanent polarization (P{sub r}) values of 21.3 and 36.4 {micro}C/cm{sup 2}, coercive electric field (E{sub c}) values of 41 and 173 kV/cm, and leakage current densities of {approx}1.1 x 10{sup -8} and {approx}1.6 x 10{sup -7} A/cm{sup 2}, respectively. The energy storage capability was measured at {approx}65 J/cm{sup 3} for the PLZT film-on-foil capacitor deposited on HC with LNO buffer.

36 MATERIALS SCIENCE↗

FMR and Magnetic Studies of RF-Sputtered Mn-Zn Ferrite Thin Films

The Manganese–Zinc ferrite (MZF) thin films were deposited on quartz substrates by radio frequency (RF) magnetron sputtering at 10 mTorr of argon gas pressure. The FMR and magnetization measurement were carried out to understand magnetic properties of the as-deposited and annealed MZF films. The resonance field (H{sub r}) of the FMR spectra shifts towards higher magnetic field when angle between applied field and thin film plane is changed from 0 to 90° indicating the existence of uniaxial anisotropy in the film. Whereas, H{sub r} shifts towards lower magnetic field with decrease in temperature of the film. This is due to ferrimagnetic ordering in the films at low temperatures. The magnetization versus field (M-H) plots reveal the soft ferrimagnetic behavior of the films. The post-deposition annealing of the film leads to increase in crystallite size with more uniform film surface and dense columnar growth compared to the as-deposited film. The increase in magnetization and decreases in H{sub r}-values compared to that of as-deposited film are observed for annealed film. The optical band gap of the film is also found to increase with annealing.

36 MATERIALS SCIENCE↗

Electrochemical Characterization of Certain Mg-Based Alloys in Artificial Perspiration Biofluid for Consumer and Industrial Applications

The weight reduction of numerous consumer electronic devices is of increasing importance. In this respect, ultra-light magnesium alloys have attracted more attention to be used as frame materials. Nevertheless, Mg alloys are of intrinsically poor corrosion resistance, especially in chloride ion-containing environments. Human perspiration fluid with a relatively high chloride ions content (~ 0.14 M) comes in contact with a number of consumer products resulting in a variety of undesirable effects such as malfunction and corrosion. Based on that, the present work addresses the corrosion behavior of five AZ-Mg alloys including AZ91D, AZ80E, AZ31, AM60 and AXJ530 in artificial perspiration biofluid at human body temperature of 37 °C. The study is performed using electrochemical impedance spectroscopy and potentiodynamic polarization techniques supported by surface morphological and EDX spectra examinations. The surface layer total resistance value (R{sub T}) estimated from the analysis of obtained impedance data after 12-h exposure period reveals that durability of our tested samples increases in the following sequence: AZ80 > AZ91 > AZ31 > AM60 > AXJ530 > Mg (control). AZ80E alloy at top of this sequence points to its significantly high anti-corrosion performance in artificial perspiration biofluid and thus can be the best Mg materials of choice for many housing consumer electronic products. This outcome is in consistence with the corrosion rate (P{sub i} in mm y{sup −1}) trend as derived from the potentiodynamic polarization data that decreases in the following order: AZ80 (0.25) < AZ91 (0.49) < AZ31 (1.03) < AM60 (1.23) < AXJ530 (5.36) < Mg (5.98). Both FE-SEM images and EDX analyses further confirm these experimentally electrochemical findings.

36 MATERIALS SCIENCE↗

{sup 18}F-FDG PET/CT for the quantification of inflammation in large carotid artery plaques

Background: There is currently no consensus on the methodology for quantification of {sup 18}F-FDG uptake in inflammation in atherosclerosis. In this study, we explore different methods for quantification of {sup 18}F-FDG uptake in carotid atherosclerotic plaques and correlate the uptake values to histological assessments of inflammation. Methods and Results: Forty-four patients with atherosclerotic stenosis ≥70% of the internal carotid artery underwent {sup 18}F-FDG PET/CT. Maximum standardized uptake values (SUV{sub max}) from all plaque-containing slices were collected. SUV{sub max} for the single highest and the mean of multiple slices with and without blood background correction (by subtraction (cSUV) or by division (target-to-background ratio (TBR)) were calculated. Following endarterectomy 30 plaques were assessed histologically. The length of the plaques at CT was 6-32 mm. The {sup 18}F-FDG uptake in the plaques was 1.15-2.66 for uncorrected SUVs, 1.16-3.19 for TBRs, and 0.20-1.79 for cSUVs. There were significant correlations between the different uptake values (r = 0.57-0.99, P < 0.001). Methods with and without blood background correction showed similar, moderate correlations to the amount of inflammation assessed at histology (r = 0.44-0.59, P < 0.02). Conclusions: In large stenotic carotid plaques, {sup 18}F-FDG uptake reflects the inflammatory status as assessed at histology. Increasing number of PET slices or background correction did not change the correlation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hartree-Fock-Roothaan energies and expectation values for the neutral atoms He to Uuo: The B-spline expansion method

The ground state energies and expectation values of atoms are given by Hartree-Fock-Roothaan calculations with one B-spline set. For the neutral atoms He to Uuo, the total energies, kinetic energies, potential energies, and virial ratios are tabulated. Our total energies are in excellent agreement with the highly accurate 10-digit numerical Hartree-Fock energies given by Koga and Thakkar [T. Koga, A.J. Thakkar, J. Phys. B 29 (1996) 2973]. The virial ratios are in complete agreement to within 12-digits of the exact value -2. Orbital energies, electron densities at the nucleus, electron-nucleus cusp ratios, and radial expectation values <r{sup n}> (n = 2, 1, -1, -2, -3) are also given.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Table of experimental nuclear ground state charge radii: An update

The present table contains experimental root-mean-square (rms) nuclear charge radii R obtained by combined analysis of two types of experimental data: (i) radii changes determined from optical and, to a lesser extent, K{sub α} X-ray isotope shifts and (ii) absolute radii measured by muonic spectra and electronic scattering experiments. The table combines the results of two working groups, using respectively two different methods of evaluation, published in ADNDT earlier. It presents an updated set of rms charge radii for 909 isotopes of 92 elements from {sub 1}H to {sub 96}Cm together, when available, with the radii changes from optical isotope shifts. Compared with the last published tables of R-values from 2004 (799 ground states), many new data are added due to progress recently achieved by laser spectroscopy up to early 2011. The radii changes in isotopic chains for He, Li, Be, Ne, Sc, Mn, Y, Nb, Bi have been first obtained in the last years and several isotopic sequences have been recently extended to regions far off stability, (e.g., Ar, Mo, Sn, Te, Pb, Po)

74 ATOMIC AND MOLECULAR PHYSICS↗

Green co-solvent-assisted one-pot synthesis of high-performance flexible lignin polyurethane foam

Although lignin is a promising candidate as a source of polyol for producing eco-friendly polyurethane foam (PUF), its direct application has limitations, primarily stemming from the brittleness of the resulting products and poor processibility at high lignin loadings. To address these technical challenges, we introduced an effective co-solvent for the lignin-based polyurethane foams (LPUFs) with up to 80wt% of lignin substitution for petroleum polyols. As a green co-solvent that involves carbon dioxide fixation during its production, propylene carbonate (PC), was blended with lignin and improved the distribution of lignin by decreasing the viscosity, providing a room-temperature reaction. The LPUFs demonstrated a comparable thermal insulation performance (R-values greater than 5 in -1 ) with commercially available PUF with a uniform size of closed-cell structure induced by the reduced viscosity of lignin-based polyol. LPUFs also showed enhanced fire retardancy and moisture resistance compared to the control PUFs, benefiting from lignin’s intrinsic fire-resistant and hydrophobic properties. To mitigate the brittleness issue at high lignin loadings, flexible polyethylene glycols (PEGs) with a high molecular weight (i.e., PEG-1000) were dissolved in PC at room temperature to further improve the mechanical strength of LPUFs. The compressive strength of LPUFs with 80 wt% lignin substitution content was remarkably improved to 226 kPa by the employment of co-solvent and PEG-1000 compared to the control PUF (<140 kPa). Moreover, the flexibility of the LPUFs was successfully controlled by simply adjusting the PEG-400/PEG-1000 ratio. In conclusion, the results of this study provide valuable insights for accelerating and broadening the utilization of lignin in sustainable materials and manufacturing areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties and performance of lignin-based polyurethane foams from lignin and castor oil as synergistic bio-polyols

Lignin and castor oil with intrinsic hydroxyl groups are attractive green resources for polyurethane (PU) applications. However, lignin's heterogeneous and highly crosslinked structure, poor processability, as well as the feedstock variability, lead to inconsistent and poor performance of the final foam products. Castor oil-based polyurethane foam (PUF) has a relatively high price and density, which are big hurdles to its practical applications. Here, in this study, we hypothesized that synergistic bio-polyol mixtures composed of lignin and castor oil could balance the drawbacks from individual component. Castor oil could improve the dispersity of lignin, while lignin simultaneously addressed the issues caused by PUF prepared with castor oil, such as its high density and low thermal stability. For a comprehensive understanding of the effects of structural properties of lignin on its PUF processing and applications, various lignin fractions were isolated by co-solvent enhanced lignocellulosic fractionation (CELF) from different species, including hardwood, softwood, and herbaceous plants, and the processed lignins with different molecular weights were applied with castor oil. The lignin fractions with lower molecular weight showed good dispersity in castor oil with a high lignin content (up to 50 wt%) and completely replaced petroleum-based polyols. The produced foam with 50 wt% low-molecular-weight lignin fractions from woody biomass showed comparable/higher compressive strength (up to 20 psi) and thermal insulation performance (up to 5.69 R-value in −1 for 50 % L-Pine foam). In addition, this study revealed the relationship between lignin's structural properties and foam performance, providing insights for practical applications of lignin-based PUF.

Jeong, Soyeon [State Univ. of New York (SUNY), Syr↗

Predicting river turbidity in Pine Island Bayou using machine learning techniques coupled with variational mode decomposition

Elevated turbidity levels pose significant public health risks by facilitating the transport of harmful pollutants, including metals, organic compounds, and pathogenic microorganisms into the surface water. These conditions create serious challenges for public recreational water use and drinking water treatment, leading to economic losses and health risks. This study utilizes water monitoring data in Pine Island Bayou, Texas, and develops a Sequence-to-Sequence (S2S) model to predict turbidity using Attention-based Gated Recurrent Units with Encoder-Decoder (AT-GRU-ED) and Long Short-Term Memory (LSTM), coupled with Variational Mode Decomposition (VMD). Compared to the model without VMD, the model demonstrates satisfactory 72-hour turbidity prediction performance, achieving MAEs of 2.60 and 3.29 NTU (reductions of 53% and 58%), RMSEs of 21.08 and 31.49 NTU (reductions of 82% and 80%), and R² values of 0.96 and 0.84 on the validation and test sets, respectively. Feature importance analysis reveals that water temperature is the dominant factor influencing seasonal turbidity patterns, while real-time hourly rainfall significantly contributes to short-term variability. Turbidity typically peaks within 48 hours after rainfall events due to lagged effects from surface runoff and upstream flow. Findings suggest suspending recreational water use and water supply pumping for three days after heavy rainfall can benefit public health and improve water treatment processes. Discharges above 100 m3/s are found to accelerate sediment dilution and transport, reducing turbidity levels more quickly after the peak. In conclusion, the proposed model demonstrates reliable 72-hour turbidity prediction, supporting decision-making for water treatment plant operations and providing early warning for public recreational water use.

Deep learning↗

Comparative dielectric studies of nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12} and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} nano-composites synthesized by modified sol–gel and solid state methods

BaTiO{sub 3} (BTO), CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and 0.5BaTiO{sub 3}·0.5CaCu{sub 3}Ti{sub 4}O{sub 12} (BTO–CCTO), as a new nano-composite ceramic, were successfully designed and fabricated by a semi-wet gel route and a modified solid state method. The dielectric properties of the BTO–CCTO ceramic were compared to those of the BTO and CCTO ceramics at lower sintering temperatures and durations. The X-ray diffraction analysis revealed that the BTO and CCTO ceramics form a single crystalline phase and the average crystalline sizes calculated from X-ray diffraction data were in the range of 40–65 nm. The particle sizes of the BTO, CCTO, and BTO–CCTO ceramics obtained from transmission electron microscopy images were in the ranges of 40–65 nm, 80–110 nm, and 70–95 nm, respectively. The phase composition and microstructure were studied by X-ray diffraction and scanning electron microscopy. The energy dispersive X-ray results demonstrated the purity and stoichiometry of the BTO–CCTO nano-composite. The grain sizes of the BTO, CCTO and BTO–CCTO ceramics were found to be in the ranges of 500 nm–1 μm, 4–24 μm, and 250 nm–4 μm, respectively. The AC conductivity as a function of frequency confirmed the semiconducting nature of all of the ceramics and obeyed the Jonscher's power law. The impedance spectrum measurement result showed that the CCTO ceramic possessed an exceptional grain boundary resistance, which supports the internal barrier layer capacitance (IBLC) mechanism present in this ceramic and is responsible for the high ε{sub r} values. - Highlights: • Nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12}, and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} have been synthesized. • XRD and TEM analysis confirmed the formation of nanoparticles, 40–65 and 50–90 nm. • Impedance analysis shows high grain-boundary resistance present in CCTO ceramic. • AC conductivity as a function of frequency confirms the semiconducting nature.

36 MATERIALS SCIENCE↗

Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles

Highlights: • Zn has a negligible influence on the final recrystallization microstructure and texture of Al-Mg-Si-Cu alloys. • By adding Fe-rich phase particles to refine the recrystallization grain sizes could control the texture. • The deep drawability of Al-Mg-Si-Cu alloys could be affected by solute Zn atom besides the microstructure and texture. - Abstract: The effect of Zn on the microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles was investigated using tensile testing machine, optical microscopy (OM), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffractometer (XRD) in the present study. The results show that Zn addition has a significant influence on the final mechanical properties, but a slight effect on microstructure and final recrystallization texture. Zn addition is favorable to increase yield strength, ultimate tensile strength and elongation, however it is detrimental to improve r value and reduce Δr value. During the thermomechanical processing, the microstructure almost has nothing to do with Zn addition. However, Zn could prevent the secondary phase particles from precipitating during intermediate annealing. In contrast to the alloy sheet without Zn, the alloy sheet with 1.0 wt% Zn always has weaker textures before final cold rolling, but a stronger texture after experiencing final cold rolling. After solution treatment, they almost possess the same recrystallization texture. Finally, the effect of Zn addition on the recrystallization texture was discussed. Their similar recrystallization texture can be attributed to the similar microstructure, which was caused by the medium number of Fe-rich phase particles.

36 MATERIALS SCIENCE↗

Effect of intermediate annealing time on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloy

Highlights: • Long intermediate annealing time could be beneficial to the improvement of deep drawability. • Long intermediate annealing time could give rise to more particles with a larger average size. • As intermediate annealing time increases, strength will change and it has no positive correlation with annealing time, • A particle dissolution model is proposed to illustrate the variation of the strengths with intermediate annealing time. - Abstract: The effect of intermediate annealing time on the microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys was studied by mechanical properties, microstructure and texture characterization in the present study. The results show that the intermediate annealing time has some influence on the microstructure, recrystallization texture, and final mechanical properties. After the pre-aging treatment and natural aging treatment (T4P treatment), in contrast to the sheet with short intermediate annealing time, the sheet with long intermediate annealing time possesses higher plastic strain ratio r value. Strength has no positive correlation with annealing time, and when applying the annealing time of 16 h, the strength is highest. Before solution treatment, the sheet with long intermediate annealing time has more particles with a larger average size, compared with the sheet with short intermediate annealing time. After solution treatment, they possess the similar recrystallization equiaxed grain structure and recrystallization texture. The sheet with short intermediate annealing time is comprised of Cube{sub ND} {001} <310>, Goss {110}<001> and P {011}<122> orientations, while the sheet with long intermediate annealing time possesses weak texture including Cube{sub ND} {001}<310>, Goss {110}<001> and {015}<751> orientations. Finally, a particle dissolution model during solution treatment is proposed to explain the variation of strength with annealing time.

36 MATERIALS SCIENCE↗

Effect of Bi and Ti substitutions for Na and Nb on ferroelectric properties of oriented (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} compounds

Research highlights: {yields} (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} formed solid solution over whole composition range. {yields}P{sub r} of BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing composition x. {yields} By using hot forging, P{sub r} of BNTNW at x = 0 was extremely improved (P{sub r} = 18 {mu}C/cm{sup 2}). -- Abstract: (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} (BNTNW) compounds were synthesized and their ferroelectric properties were characterized. The X-ray powder diffraction patterns of the compounds revealed that they have a single phase over the whole composition range. The linear variations of the lattice parameters with composition indicate the formation of solid solutions, resulting in a reduction in the orthorhombicity of the compounds. The remnant polarization of the BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing x, which may be related to the orthorhombicity of the compounds. By using hot forging, an oriented BNTNW compound at x = 0 was obtained. Strong reflections from (0 0 l) were observed for sample // in which the measurement direction is parallel and the orientation factor of such sample was approximately 0.72. A remarkable increase in the remnant polarization (P{sub r}) of the compound was observed for the sample -perpendicular in which the direction of applied pressure is perpendicular to the measurement direction; the highest P{sub r} value was 18 {mu}C/cm{sup 2}.

36 MATERIALS SCIENCE↗

Enhanced characteristics of Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ferroelectric nanocrystalline ceramic prepared by mechanical activation process: A comparative study

Graphical abstract: In the present work, structural, dielectric, ferroelectric, piezoelectric and pyroelectric properties of tungsten-bronze structured Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ceramics, synthesized by mechanical activation and conventional solid-state reaction processes, have been studied with an objective of comparing the properties of the specimens synthesized by the two processes. The specimen prepared using mechanical activation process exhibits improved structural and electrical properties. Research highlights: {yields} In this report Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} compounds have been synthesized. {yields} Synthesis was carried out by mechanical activation and solid-state reaction processes. {yields} The mechanical activation process yields nanocrystalline specimen. {yields} The synthesized specimens were characterized for their electrical properties. {yields} A comparative study reveals that nanocrystalline specimen possesses superior properties. -- Abstract: In the present work, structural, dielectric, ferroelectric, piezoelectric and pyroelectric properties of tungsten-bronze structured Ba{sub 5}SmTi{sub 3}Nb{sub 7}O{sub 30} ceramics, synthesized by mechanical activation and conventional solid-state reaction processes, have been studied with an objective of comparing the properties of the specimens synthesized by the two processes. X-ray diffraction analysis shows the formation of the compound in an orthorhombic structure by both the processes. Scanning electron microscopy reveals the formation of a fine granular microstructure in the specimen synthesized by mechanical activation process compared to the specimen synthesized by conventional solid-state method. The specimen prepared using mechanical activation process exhibits improved electrical properties with higher dielectric constant, lower dielectric loss and higher resistivity. The effective remanent polarization (P{sup -bar{sub r}}) value, d{sub 33} value and pyroelectric coefficients are also observed to be higher in the sample synthesized by the mechanical activation process.

36 MATERIALS SCIENCE↗

Dissolved gas recovery from water using a sidestream hollow-fiber membrane module: First principles model synthesis and steady-state validation

This paper presents a first-principles model for the recovery of dissolved gases from liquids using a sidestream hollow-fiber membrane module. The model avoids the use of new empirical coefficients, thus providing a parametric understanding of the process behavior for future design and optimization of membrane modules. This type of first-principles model could be particularly useful when gas recovery is beneficial to biological or chemical reactions of interest, such as the acetogenesis reactions in two-stage anaerobic digesters. The steady-state behavior of the model was validated against both new experimental data for the recovery of H 2 , CH 4 and H 2 –CH 4 mixtures from pure water, as well as existing published data. The modeled gas recovery predictions agreed with experimental data to an absolute average error of 13%, and an average R value of 0.98. Parametric analysis of mixed-gas recovery suggests possible key transition points in the composition of the recovered gases. For example, at 40 °C, increasing trans-membrane pressure while keeping hydraulic residence time (HRT) under 0.5 s will result in an increase in the ratio of H 2 to CH 4 recovered. Otherwise, increasing trans-membrane pressure will instead decrease the ratio of H 2 to CH 4 recovered. The model has potential to be extended to transient analysis, but has yet to be validated with transient experimental data. Furthermore, this model was successfully implemented in both Python and MATLAB, and provides valuable insights for future net-energy optimization for anaerobic digestion systems with in-situ gas recovery.

Anaerobic Digestion↗