Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIO NAVIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Airborne gravity and other geophysical techniques for understanding the lithosphere beneath the West Antarctic Ice Sheet

As part of a program entitled Corridor Aerogeophysics of the Southeastern Ross Transect Zone (CASERTZ), an aerogeophysical platform was developed to study the interaction of geological and glaciological processes in West Antarctica. A de Havilland Twin Otter was equipped with an ice-penetrating radar, a proton precession magnetometer, an airborne gravity system, and a laser altimeter. The 60-MHz ice-penetrating radar can recover sub-ice topography with an accuracy of about 10 m through 3 km of comparatively warm West Antarctic ice, while the laser altimeter profiling of the ice surface is accurate to approximately 1 m. The magnetic field observations are accurate to several nT, and the gravity measurements are accurate to better than 3 mGal. The aircraft is navigated by a local radio transponder network, while differential positioning techniques based on the Global Positioning System (GPS) satellites are used for recovering high-resolution horizontal and vertical positions. Attitude information from an inertial navigation system is used to correct the laser altimetry and a digital pressure transducer is used to recover vertical positions and accelerations in the absence of satellite positioning. Continuous base-station observations are made for the differential GPS positioning and the removal of ionospheric noise from the airborne magnetometer measurements.

Bell, Robin E.↗

Localization of Ad-Hoc Lunar Constellations in Communication Failure Modes for Distributed Spacecraft Autonomy

As lunar missions increase in complexity inspired by NASA’s Artemis Program, they will require reliable and sufficient capability of the Position, Navigation, and Timing (PNT) system to support their scientific objectives. In addition, NASA's Commercial Lunar Payload Services (CLPS) program initiates the proliferation of public and private exploration partnerships using small satellites from commercial and private organizations, expanding traditionally confined low Earth orbit to be used for missions beyond geosynchronous orbit (Zucherman et al., 2022). Therefore, the Lunar PNT system is also required to provide navigation services compatible with the smaller platforms being sent by the public and private sectors, like CubeSats. However, traditional approaches to deep space missions’ navigation based on ground radio facilities have difficulties in providing sufficient support for the increasing number of users and communication at a distance from the Earth (Kaplev et al., 2022). In particular, the existing Lunar navigation technologies such as weak signal global positioning system (GPS) and deep space network (DSN) are not able to ensure operations of the upcoming small-scale Lunar missions due to their limitations in localization performance as well as capacity aspects. Another way to provide Lunar PNT service is to create a dedicated Lunar global navigation satellite system (GNSS) constellation, like GNSS systems on Earth. Space agencies like NASA, ESA, and JAXA are now developing the lunar communications relay and navigation systems (LCRNS) and Lunar navigation satellite systems (LNSS). In their systems, satellites will be deployed in moon orbits to provide the communication, positioning, navigation, and timing (CPNT) service at the lunar south pole region where the Artemis base camp will be expected (Murata et al., 2022). Meanwhile, common challenges considered in lunar PNT research arise from poor geometry of the terrestrial GNSS satellites when seen from the lunar user, highly perturbed lunar orbits, and limitations in power, size, and cost of the equipment on lunar satellites (Iiyama et al., 2023). It is also not clear if there will be enough Lunar users to support the cost and resources this would require as the Low-cost surface missions may not be able to support the large power, mass, and weight requirements that these navigation solutions entail (Niemoeller et al., 2022). As an alternative, existing Lunar science and exploration assets could be used to create a low-cost, autonomous, ad-hoc, and on-demand mission-centric Lunar PNT swarm capable of providing PNT services to these low-cost lunar missions (Hagenau et al., 2021). Introducing the non-dedicated and ad-hoc Lunar navigation constellation gives a way to provide PNT services on-demand. The non-dedicated swarm assets of Lunar constellations are designed to localize themselves with minimal interaction with Earth by adding cooperative autonomous localization to lunar missions, freeing up valuable bandwidth and ground segment resources. An autonomous localization of Lunar constellations is based on the concept of the decentralized PNT system with a distributed extended Kalman filter (DEKF) approach to state estimation for minimal onboard operating costs. In the distributed data processing algorithm, computation is broken down and assigned to each satellite, resulting in a considerably decreased computational amount while maintaining the accuracy of the orbit ephemeris and clock offsets as the result of centralized data processing (Wen et al., 2019). The DEKF requires spacecraft to perform two-way ranging operations with each other to communicate simultaneously, leveraging neighbor two-way intersatellite link (ISL) measurements such as pseudoranges to, and relative velocities between, visible satellites as sensor values (Frank et al., 2021). The Lunar autonomous PNT simulation (LAPS) demonstrated the feasibility of orbital asset localization among ad-hoc Lunar small-sat constellations based on the DEKF in Hagenau et al. (2021) and evaluated the matching algorithm proposed by Frank et al. (2021) in scheduling position estimation updates. In previous papers, all assets and measurements are assumed to be always available without consideration of the impact of intermittent and permanent communication failure. This study presents localization performance with increasing levels of network degradation for swarm assets and users to demonstrate the robustness of the decentralized Lunar PNT service in more realistic scenarios. Main issues arising from communication failure include spacecraft permanent or transient loss, antenna failures, message delays, etc. We tested four possible reasons for network degradation for 7 days in 21 satellites frozen with an altitude of 5500 km, evenly spaced around 3 circular, 40 inclination orbital planes where each spacecraft has two directional antennas. As anchor nodes with an independent estimate of their position are required in the DEKF approach, two ground nodes in each pole and one node in the gateway were implemented in the simulation. First, the most probable failure scenario involves the loss of a single spacecraft due to solar interference and technical malfunctions of the assets. Losing the availability of a single spacecraft means losing the two-way ISL measurement of the asset in the DEKF update. In order to provide the best possible quality of PNT service with limited time and resources, the distributed Lunar constellations must schedule the communication activities. The scheduler leverages mixed-integer linear programming (MILP) for the coordination and scheduling of the desired “as-needed” localization service (Niemoeller et al., 2022). We assume the scheduler has completely excluded the spacecraft information before the DEKF update in the failure scenario. When a random spacecraft has been turned off at a specific time, the robustness of the autonomous Lunar PNT system is evaluated. The simulation results give an 11.5% degradation in median position accuracy compared to the idealized performance excluding the asset loss. Second, a large number of assets may vanish due to major hardware problems or meteor strikes around the moon. A multiple spacecraft loss can degrade the localization performance very fast by losing the communication ability to do cross-plane measurements and in-plane measurements in a 3-plane constellation. When the matching-based scheduler is aware of ISL availability, we investigate a large number of in-plane and cross-plane asset vanishments both in close proximity and equally spaced throughout the orbital plane. According to the simulations, the loss of in-plane measurements gives 40.2% degradation while cross-plane measurements degrade 50.5% of asset localization performance among available assets. Therefore, it is concluded that cross-plane measurements are more important in improving the position estimation accuracy. Third, spacecraft failure information can be lost due to the internal message delay, resulting in the DEKF update scheduler to solve the matching problem with unavailable assets. The DEKF update cycle is comprised of network setup, communication, and computations where a global broadcast network and a 2-way ISL network setup take 6 minutes in total (Frank et al., 2021). Once the broadcast network successfully transmits and receives information, a random spacecraft may lose its availability right before solving the matching problem. This means the matching solution is no longer optimal, resulting in degradation in the localization performance. A numerical assessment shows the matching-based scheduler with knowing failure holds 11.5% of position accuracy degradation, whereas the scheduler without knowing failure gives 34% degraded localization performance without asset loss. Fourth, a transient loss of a single or multiple spacecraft may occur due to their antenna outages. After losing the two-way ISL availability for a few DEKF update cycles, the availability of spacecraft can easily be recovered as their states have been independently updated using measurements from anchor nodes. It is likely that the longer failure will result in worse localization performance. We have tested the transient failure of a random single asset for 30 min in the simulation, which is losing 3 update cycles in the DEKF system. From the simulation results, the position accuracy has been degraded to 4.84% which is better than the degraded localization performance of 11.5% from the permanent loss scenario among available assets. In conclusion, the autonomous Lunar PNT system based on the DEKF approach shows the ability to maintain resilience and robustness in the possible communication failure scenarios, ensuring that localization accuracy is preserved across various network degradation and outages. Future studies on investigating user localization performance near the South Pole and the broadcast network system will be continued in the following months.

Yeji Kim↗

The Use of Spire Radio Occultation Measurements in the GEOS Atmospheric Data Assimilation System

As part of the pilot segment of the NASA Commercial SmallSat Data Acquisition (CSDA) Program, the Global Modeling and Assimilation Office (GMAO) evaluated products acquired from Spire Global, Inc. in the context of the Goddard Earth Observing System (GEOS) Atmospheric Data Assimilation System (ADAS). Specifically, the GMAO assimilated the bending angle profiles derived by Spire from Global Navigation Satellite System (GNSS) radio occultation (RO) measurements of the atmosphere made by their Stratos instruments onboard their constellation of Lemur small satellites. The bending angle observations were used to further constrain the thermodynamic fields in the context of the global observing system typically assimilated within GEOS.

Will Mccarty↗

Accuracy Assessment of Two Gps Fidelity Prediction Services in Urban Terrain

Low altitude flight in urban areas is susceptible to degraded GNSS-based navigation system performance due to terrain interference with radio signals from orbital positioning satellites. Predictive navigation performance fidelity tools are needed a) in preflight planning to assist in the creation of safe flight paths and b) in-flight to provide contingency management agents with the navigation risk of proximal flight corridors. Two navigation fidelity prediction services are validated by comparison with over 6000 readings from GNSS sensors collected along a five-mile path through urban areas of Corpus Christi, Texas, on three dates in 2022. Predictions are based on satellite line of sight through 3D terrain data collected in 2018. Each service predicts a set of navigation fidelity metrics over a user-specified time period. One metric estimated by both is the number of visible satellites. A direct comparison of the number of predicted visible satellites with the number sensed by the receiver is used to validate the prediction services. Results show an exact match in the number of predicted satellites for 60% of the measurements, and a match within +/- 4 satellites for 95% of the measurements. As expected, agreement improves away from vertical blocking terrain. Most cases of mismatch are due a lower predicted count than measured (false negatives), and can be accounted for by receiver pickup of stray signals caused by multipath propagation. About 10% of mismatches are false positives and are mostly accounted for by foliage effects. The two services predict visibility of the same set of satellites 80% of the time, differ by two or less satellites 95% of the time, and can compute predictions for one hour of observations in one minute or less. Validation is analyzed statistically and in detailed case studies of selected observation times. The prediction services validated in this study run fast enough for preflight safety planning. The more stringent challenge of inflight navigation fidelity prediction for contingency management requires both a speedup of the current level of modeling and equally fast stray signal modeling.

Andrew Moore↗

Accuracy Assessment of Two GPS Fidelity Prediction Services in Urban Terrain

Low altitude flight in urban areas is susceptible to degraded GNSS-based navigation system performance due to terrain interference with radio signals from orbital positioning satellites. Predictive navigation performance fidelity tools are needed a) in preflight planning to assist in the creation of safe flight paths and b) in-flight to provide contingency management agents with the navigation risk of proximal flight corridors. Two navigation fidelity prediction services are validated by comparison with over 6000 readings from GNSS sensors collected along a five-mile path through urban areas of Corpus Christi, Texas, on three dates in 2022. Predictions are based on satellite line of sight through 3D terrain data collected in 2018. Each service predicts a set of navigation fidelity metrics over a user-specified time period. One metric estimated by both is the number of visible satellites. A direct comparison of the number of predicted visible satellites with the number sensed by the receiver is used to validate the prediction services. Results show an exact match in the number of predicted satellites for 60% of the measurements, and a match within +/- 4 satellites for 95% of the measurements. As expected, agreement improves away from vertical blocking terrain. Most cases of mismatch are due a lower predicted count than measured (false negatives), and can be accounted for by receiver pickup of stray signals caused by multipath propagation. About 10% of mismatches are false positives and are mostly accounted for by foliage effects. The two services predict visibility of the same set of satellites 80% of the time, differ by two or less satellites 95% of the time, and can compute predictions for one hour of observations in one minute or less. Validation is analyzed statistically and in detailed case studies of selected observation times. The prediction services validated in this study run fast enough for preflight safety planning. The more stringent challenge of inflight navigation fidelity prediction for contingency management requires both a speedup of the current level of modeling and equally fast stray signal modeling.

Andrew J. Moore↗

Senteniel-6 Radio Occultation Product Released by NASA GES DISC to Supplement Satellite Remote Sensing Datasets for PBL Study

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) curates hyperspectral atmospheric sounder remote sensing and numerical model reanalysis datasets which have been utilized in the Planetary Boundary Layer (PBL) research and applications. The hyperspectral sounder remote-sensing datasets include the Atmospheric Infrared Sounder (AIRS) on the Aqua satellite to the Cross-track Infrared Sounder (CrIS) on Suomi--National Polar- orbiting Partnership (NPP) and National Oceanic and Atmospheric Administration -20 (N NOAA-20)/ Joint Polar-orbiting Satellite System -1 (JPSS-1). The Modern-Era Retrospective analysis for Research and Applications Version 2 (MERRA-2) global reanalysis product provides a data record commencing in 1980. The sounder remote sensing and reanalysis datasets include temperature, water vapor, and trace gas profile down to the PBL, and also have a derived PBL height as well. A nearly 10-year (June 2006 to December 2015) seasonal and annual PBL height climatology dataset from COSMIC Global Navigation Satellite System (GNSS) radio occultation (RO) measurement is also available from the GES DISC. In collaboration with Sentinel-6 Project, the GES DISC is implementing curation activities for GNSS RO products from the Sentinel-6A/Sentinel-6 Michael Freilich satellite launched on November 21, 2020. Sentinel-6A RO products provide refractivity, temperature, and humidity profile with finer vertical resolution, leveraging PBL research and application as a supplement to the hyperspectral sounder remote sensing and reanalysis products. The public release of Sentinel- 6A RO products is scheduled for mid-October of 2021. In this presentation, we will introduce all Senitnel-6A products and services, and demonstrate use cases studying the PBL by combining these products with other GES DISC archived data products.

Feng Ding↗

The Space Communications and Navigation Testbed aboard International Space Station: Seven Years of Space-based Reconfigurable Software Defined Communications, Navigation, and Networking

The adoption of software defined radios offers space missions a new way to develop and operate space transceivers for communications and navigation.The SCaN Testbed on-board the ISS led groundbreaking efforts to champion use of software defined radios for space communications. The SCaN Testbed has allowed NASA, industry, academia, and international partners to pursue their respective interests in joint collaboration with NASA, and move this technology and it's applications to the space domain. Launched in 2012, The SCaN Testbed has logged over 4000 hours of operation exploring the development, reconfiguration, and operation of software defined radios and their software applications. Over the past seven years, experimenters and organizations from across the United States and around the world, have advanced the applications of software defined radios and networks using the SCaN Tested. Some of SCaN Testbed's successful experiments include the demonstration of the first Ka-band full duplex space transceiver, which became an R&D 100 award winning technology, and was inducted into the Space Technology Hall of Fame, following the launch and space deployment of a successful commercial product line based on the Testbed radios.Experiments have focused on new software development and operations concepts for understanding how to manage and apply this relatively new technology to space to improve communications and navigation for space science and exploration missions. The advanced capabilities of the software radios allow for multiple applications or functions (e.g., communication and navigation) to operate from the same radio platform. Multiple software waveform applications enable software component reuse and improve efficiency for multiple applications operating over different mission phases. The new capabilities of software defined radios such as on-orbit reconfiguration, also present new challenges such as increased operational complexity. Experiments of the SCaN testbed include more intelligent or cognitive applications to improve communications efficiency and manage the complexity of the radios, the communication channels, and the network itself. The software defined radios on the SCaN Testbed are each compliant to NASA's Space Telecommunications Radio System (STRS) Architecture. The STRS Architecture provides commonality among radio developments from different providers and different mission applications, and is designed to reduce the cost, risk, and complexity of unique and custom radio developments. This radio architecture standard defines common waveform software interfaces, methods of instantiation, operation, and documentation. As the SCaN Testbed concludes its operations on ISS, this presentation explores the advancements and accomplishments made to advance software defined radio technology and its applications for exploration. The accomplishments cover a number of experiment areas in Ka-band and S-band communications with TDRS, high rate communications, adaptive waveform operation, navigation using both GPA and Galileo constellations, complex networking and disruptive tolerant link protocols, user initiative service, and initial experiments with intelligent and cognitive applications which demonstrate the significant potential of software defined and cognitive radios.

Mortensen, Dale↗

First Observations With A Gnss Antenna to Radio Telescope Interferometer

We describe the design of a radio interferometer composed of a Global Navigation Satellite Systems (GNSS) antenna and a Very Long Baseline Interferometry radio telescope. Our eventual goal is to use this interferometer for geodetic applications including local tie measurements. The GNSS element of the interferometer uses a unique software-defined receiving system and modified commercial geodetic-quality GNSS antenna. We ran three observing sessions in 2022 between a 25 m radio telescope in Fort Davis, Texas (FD-VLBA), a transportable GNSS antenna placed within 100 m, and a GNSS antenna placed at a distance of about 9 km. We have detected a strong interferometric response with a Signal-to-Noise Ratio (SNR) of over 1,000 from Global Positioning System and Galileo satellites. We also observed natural radio sources including Galactic supernova remnants and Active Galactic Nuclei located as far as one gigaparsec, thus extending the range of sources that can be referenced to a GNSS antenna by 18 orders of magnitude. These detections represent the first observations made with a GNSS antenna to radio telescope interferometer. We have developed a novel technique based on a Precise Point Positioning solution of the recorded GNSS signal that allows us to extend integration time at 1.5 GHz to at least 20 min without any noticeable SNR degradation when a rubidium frequency standard is used.

Geodesy↗

The X-windows interactive navigation data editor

A new computer program called the X-Windows Interactive Data Editor (XIDE) was developed and demonstrated as a prototype application for editing radio metric data in the orbit-determination process. The program runs on a variety of workstations and employs pull-down menus and graphical displays, which allow users to easily inspect and edit radio metric data in the orbit data files received from the Deep Space Network (DSN). The XIDE program is based on the Open Software Foundation OSF/Motif Graphical User Interface (GUI) and has proven to be an efficient tool for editing radio metric data in the navigation operations environment. It was adopted by the Magellan Navigation Team as their primary data-editing tool. Because the software was designed from the beginning to be portable, the prototype was successfully moved to new workstation environments. It was also itegrated into the design of the next-generation software tool for DSN multimission navigation interactive launch support.

Rinker, G. C.↗

Precision frequency sources

The development of precision oscillators for time and frequency standards is discussed. The applications of the oscillators to radio communication, research projects, navigation systems, and calibration sources are reported. The status of a cesium beam stabilized oscillator is examined. Photographs of the components are provided. The performance of quartz and rubidium oscillators is compared with the performance of cesium resonators.

Mccoubrey, A. O.↗

Radio metric direction finding - A new approach to deep space navigation

The paper explores an alternate technique for the determination of the angular position and velocity of deep-space probes, wherein the two-way range and Doppler measurements are abandoned for large portions of the mission in favor of differential one-way measurements. The spacecraft employs a wideband beacon rather than a coherent transponder, and differential measurements of one-way range and perhaps range rate are made between the spacecraft and each of three tracking stations. Advantages include the following: (1) Range measurements do not require the long horizon-to-horizon Doppler passes, so that the tracking stations can be released to support other functions of the deep space network. (2) Improved accuracy in the angular coordinates of the spacecraft can be obtained. (3) The need for an uplink is eliminated. A system implementation of the concept is developed that appears economically feasible and achieves a 0.05 microrad baseline accuracy

Melbourne, W. G.↗

Receivers

Before discussing Deep Space Network receivers, a brief description of the functions of receivers and how they interface with other elements of the Network is presented. Different types of receivers are used in the Network for various purposes. The principal receiver type is used for telemetry and tracking. This receiver provides the capability, with other elements of the Network, to track the space probe utilizing Doppler and range measurements, and to receive telemetry, including both scientific data from the onboard experiments and engineering data pertaining to the health of the probe. Another type of receiver is used for radio science applications. This receiver measures phase perturbations on the carrier signal to obtain information on the composition of solar and planetary atmospheres and interplanetary space. A third type of receiver utilizes very long baseline interferometry (VLBI) techniques for both radio science and spacecraft navigation data. Only the telemetry receiver is described in detail in this document. The integration of the Receiver-Exciter subsystem with other portions of the Deep Space Network is described.

Donnelly, H.↗

Cryogenic, low-noise high electron mobility transistor amplifiers for the Deep Space Network

The rapid advances recently achieved by cryogenically cooled high electron mobility transistor (HEMT) low-noise amplifiers (LNA's) in the 1- to 10-GHz range are making them extremely competitive with maser amplifiers. In order to address future spacecraft navigation, telemetry, radar, and radio science needs, the Deep Space Network is investing both maser and HEMT amplifiers for its Ka-band (32-GHz) downlink capability. This article describes the current state cryogenic HEMT LNA development at Ka-band for the DSN. Noise performance results at S-band (2.3 GHz) and X-band (8.5 GHz) for HEMT's and masers are included for completeness.

Bautista, J. J.↗

Preparing for the Huygens Probe Mission, Cassini orbit determination results for the first and second targeted Titan encounters

Dynamic modeling of the spacecraft and Saturn system, tracking data, including radio-metric and optical navigation data, and measurement modeling associated with the final trajectory analysis are described. Navigation predictions produced during the operational phase are compared with the final trajectory in order to gain insight into navigation performance and maneuver execution errors. Special attention is given to refinement of the dynamical environment of Saturn, particularly Titan, during the first two orbits.

navigation↗

Ionospheric Simulation System for Satellite Observations and Global Assimilative Modeling Experiments (ISOGAME)

ISOGAME is designed and developed to assess quantitatively the impact of new observation systems on the capability of imaging and modeling the ionosphere. With ISOGAME, one can perform observation system simulation experiments (OSSEs). A typical OSSE using ISOGAME would involve: (1) simulating various ionospheric conditions on global scales; (2) simulating ionospheric measurements made from a constellation of low-Earth-orbiters (LEOs), particularly Global Navigation Satellite System (GNSS) radio occultation data, and from ground-based global GNSS networks; (3) conducting ionospheric data assimilation experiments with the Global Assimilative Ionospheric Model (GAIM); and (4) analyzing modeling results with visualization tools. ISOGAME can provide quantitative assessment of the accuracy of assimilative modeling with the interested observation system. Other observation systems besides those based on GNSS are also possible to analyze. The system is composed of a suite of software that combines the GAIM, including a 4D first-principles ionospheric model and data assimilation modules, an Internal Reference Ionosphere (IRI) model that has been developed by international ionospheric research communities, observation simulator, visualization software, and orbit design, simulation, and optimization software. The core GAIM model used in ISOGAME is based on the GAIM++ code (written in C++) that includes a new high-fidelity geomagnetic field representation (multi-dipole). New visualization tools and analysis algorithms for the OSSEs are now part of ISOGAME.

Pi, Xiaoqing↗

Relay Support for the Mars Science Laboratory and the Coming Decade of Mars Relay Network Evolution

Mars Relay Network is prepared to support MSL: a) ODY/MRO/MEX will all provide critical event comm support during EDL. b) New Electra/Electra-Lite capabilities on the MSL-MRO link will support >250 Mb/sol MSL data return. 2013 MAVEN orbiter will replenish on-orbit relay infrastructure as prior orbiters approach end-of-life. While NASA has withdrawn from the 2016 EMTGO and 2018 Joint Rover missions, analysis of the potential link shows a path to Gbit/sol relay capability 2012.

critical event telemetry↗