Search NASA⌕ Search

SEARCH · Search NASA

Results for “RECEIVING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A tone-aided dual vestigial sideband system for digital communications on fading channels

A spectrally efficient tone-aided dual vestigial sideband (TA/DVSB) system for digital data communications on fading channels is presented and described analytically. This PSK (phase-shift-keying) system incorporates a feed-forward, tone-aided demodulation technique to compensate for Doppler frequency shift and channel- induced, multipath fading. In contrast to other tone-in-band-type systems, receiver synchronization is derived from the complete data VSBs. Simulation results for the Rician fading channel are presented. These results demonstrate the receiver's ability to mitigate performance degradation due to fading and to obtain proper data carrier synchronization, suggesting that the proposed TA/DVSB system has promise for this application. Simulated BER (bit-error rate) data indicate that the TA/DVSB system effectively alleviates the channel distortions of the land mobile satellite application.

Hladik, Stephen M.↗

Sensing propagation events and fade statistics at C-band for two over-water, line-of-sight propagation paths over a one year period

We examine signal fading statistics over a year period corresponding to two over-water, line-of-site, propagation links in the mid-Atlantic coast of the US. These links are comprised of a transmitter on a tower at Parramore Island, VA operating at 4.7 GHz sending simultaneous cw signals to two receiver systems located on a lighthouse and a lookout tower on Assateague Beach, VA at distances of 44 and 39 km, respectively. The receiving sites are separated by approximately 5 km. Cumulative fade distributions corresponding to yearly, monthly, and diurnal time scales were derived. Fade duration statistics correspond to sustained attenuation events were also derived. These events, which were arbitrarily defined as having fades relative to free space powers in excess of 20 dB for durations of two hours or more, are believed to be generally due to subrefraction. Analysis of synoptic weather conditions and nearby rawindsonde data during two sustained deep fading periods showed atmospheric conditions consistent with extreme subrefraction, where the refractivity-height profile had a positive lapse rate. The efficacy of employing the links as indicators of real time conditions of atmospheric propagation was also demonstrated by a telephone call-up procedure which enabled displays of time series of the fading at remote locations to be generated.

Goldhirsh, Julius↗

Optimum Strategies for Selecting Descent Flight-Path Angles

An information processing system and method for adaptively selecting an aircraft descent flight path for an aircraft, are provided. The system receives flight adaptation parameters, including aircraft flight descent time period, aircraft flight descent airspace region, and aircraft flight descent flyability constraints. The system queries a plurality of flight data sources and retrieves flight information including any of winds and temperatures aloft data, airspace/navigation constraints, airspace traffic demand, and airspace arrival delay model. The system calculates a set of candidate descent profiles, each defined by at least one of a flight path angle and a descent rate, and each including an aggregated total fuel consumption value for the aircraft following a calculated trajectory, and a flyability constraints metric for the calculated trajectory. The system selects a best candidate descent profile having the least fuel consumption value while the fly ability constraints metric remains within aircraft flight descent flyability constraints.

Wu, Minghong G.↗

System for Transmitting and Receiving Electromagnetic Radiation

A system for transmitting and receiving electromagnetic radiation includes a beam splitter and a transceiver. The beam splitter is configured to separate an optical pulse into a pump pulse and a probe pulse. The transceiver may include a transmitter switch and a receiver switch. The pump pulse is directed toward the transmitter switch and the probe pulse is directed towards the receiver switch. Electromagnetic radiation is emitted from the transceiver when the pump pulse strikes the transmitter switch. The electromagnetic radiation may be terahertz radiation in either a pulsed or continuous wave form.

Strong, Timothy↗

Altimeter and radiometer for a Venus orbiter mission

The concept, constraints, and capabilities of a radar altimeter type contour mapper for a Venus orbiter mission are presented. The system was developed for the proposed planetary explorer universal bus concept. A system with a height precision of 30meters over a surface area of 7200 square kilometers is achieved. Using this system and the orbit proposed in the orbiting bus concept, the northern hemisphere of Venus is mapped in one Venus day. The radar receiver system, is used in a radiometer mode to obtain a map of the diurnal and logitudinal variations of the Venus surface temperature with a resolution of 3.0 degrees Kelvin.

Bryan, J. W.↗

Origins of life; Proceedings of the First Conference, Princeton, N.J., May 21-24, 1967.

The dialogs on the origin of life commence with the fossil record. They deal with the age of the earth; the primitive atmosphere; precambrian microfossils; the Fig Tree series of rocks, which is part of the Swaziland system; the Bitter Springs Formation in Australia; and simulated Precambrian microfossils. The syntheses of biologically important monomers, amino acids, and nucleic acid derivatives are discussed. Polymerization mechanisms; the thermal origin of amino acid polymers; nonnucleic acid information carriers; the relationship between amino acid and nucleic acid polymers; the origin of the triple code; early reciprocating systems; and the evolution of the ribosomal system receive attention. Some brief comments on extraterrestrial life are presented. An appendix deals with the geological evidence for the thermal origin of living systems.

Margulis, L.↗

The Tidbinbilla interferometer

A proposal to operate a two element interferometer using the 64 m and 26 m antennas of the Tidbinbilla Deep Space Station is discussed. The instrument is to be operated as a correlation interferometer, the sine and cosine products being sampled once per second and recorded for later analysis. The receiver systems are currently under development. Preliminary measurements of the delay line and local oscillator systems and the site cables suggest that a phase stability to within about 1 deg should be achievable with temperature control of the receiver packages.

Batty, M. J.↗

The helium system of the maser installation at the Goonhilly satellite-communication earth station

A travelling-wave solid-state maser anlplifier is used to provide the first stage of amplification in the receiving system at the communication-satellite earth-station at Goonhilly Downs. While the maser itself was built by an industrial research laboratory, the auxiliary supplies and equipment essential for the operation of the maser were designed and built by staff of the Post Office Research Station. A major part of this auxiliary equipment consists of apparatus for handling the helium refrigerant.

GROUND STATION↗

Miniature modular microwave end-to-end receiver

An end-to-end microwave receiver system contained in a single miniature hybrid package mounted on a single heatsink is presented. It includes an input end connected to a microwave receiver antenna and an output end which produces a digital count proportional to the amplitude of a signal of a selected microwave frequency band received at the antenna and corresponding to one of the water vapor absorption lines near frequencies of 20 GHz or 30 GHz. The hybrid package is on the order of several centimeters in length and a few centimeters in height and width. The package includes an L-shaped carrier having a base surface, a vertical wall extending up from the base surface and forming a corner therewith, and connection pins extending through the vertical wall. Modular blocks rest on the base surface against the vertical wall and support microwave monolithic integrated circuits on top surfaces thereof connected to the external connection pins. The modular blocks lie end-to-end on the base surface so as to be modularly removable by sliding along the base surface beneath the external connection pins away from the vertical wall.

Sukamto, Lin M.↗

CNPq/INPE-LANDSAT system

The current status of the Brazilian LANDSAT facilities operated by Instituto de Pesquisas Espaciais (INPE) and the results achieved during the period from October 1, 1984 to August 31, 1985 are presented. INPE's Receiving Station at Cuiaba, MT, operates normally the two tracking and receiving systems it has installed, the old one (1973) for Band S and the new one (February 1983) for dual S- and X-band. Both MSS and TM recording capabilities are functional. Support to the NASA Backup Plan for MSS data also remains active. Routine recordings are being made for LANDSAT-5 only, for both MSS and TM. Originally, MSS was recorded over the full acquisition range. However, since December, 1984, due to further reduction of operational expenses, both instruments are being recorded over Brazilian territory only.

Debarrosaguirre, J. L.↗

Goldstone solar system radar

This task provides for the planning, experiment design, and coordination of the data acquisition and engineering activities in support of all Goldstone planetary radar astronomy. Activities related to up-grades of the receiver systems, transmitter systems, and data processing support systems are currently intense. Also, the hardware and software maintenance of the data processing facility used by many of the Goldstone Solar System Radar investigators are covered.

Jurgens, Raymond F.↗

Utilization of NASA Lewis mobile terminals for the Hermes satellite

The paper describes the portable earth terminal (PET) and the transportable earth terminal (TET) which enable two-way television and voice communication. Both terminals were developed by NASA and utilize the high power of the Hermes satellite. PET is a bus-type vehicle which has receiving equipment for full duplex color television and which can transmit programs originating in either the on-board PET studio or in nearby buildings. PET has a collapsible 2.4-m diameter parabolic antenna interfacing with a 500-watt 14-GHz wideband TV transmitter and a 12-GHz wideband TV receiver system. TET uses two parabolic reflector antennas, 3 m and 1.2 m in diameter, mounted on a flat trailer towed by a truck. TET can receive and relay color TV signals, and its narrowband transmitter can serve as a return audio link permitting a question-and-answer format. Also described are uplink and downlink performance characteristics, operation procedures, and field demonstrations which enabled personnel at several hospitals to participate in a distant medical conference.

Edelman, E. A.↗

A compact presentation of DSN array telemetry performance

The telemetry performance of an arrayed receiver system, including radio losses, is often given by a family of curves giving bit error rate vs bit SNR, with tracking loop SNR at one receiver held constant along each curve. This study shows how to process this information into a more compact, useful format in which the minimal total signal power and optimal carrier suppression, for a given fixed bit error rate, are plotted vs data rate. Examples for baseband-only combining are given. When appropriate dimensionless variables are used for plotting, receiver arrays with different numbers of antennas and different threshold tracking loop bandwidths look much alike, and a universal curve for optimal carrier suppression emerges.

Greenhall, C. A.↗

Control of a Thrust Alignment Table for Modeling the Coning Dynamics of a Spinning Spacecraft with a Follower Force

This document presents a system controlling the motion of a spherical air bearing used in the modeling of spacecraft dynamics and controls in a laboratory environment. The system is part of the Spinning Rocket Simulator (SRS), used to simulate the coning of spacecraft during a thrusting stage. The reaction force at the spherical air bearing supporting the spacecraft model must coincide with the thrust axis of the model for proper simulation. Therefore, the bearing is translated in a circular path to introduce a centrifugal force. This horizontal force along with the gravitational reaction force at the bearing combines to simulate the direction of the spacecraft's thrust force. The control system receives attitude information from the spacecraft model via a laser beam embedded in the model that impinges on a photosensitive array. The non-linear system is controlled using high-speed lookup tables and digital techniques. A vector-controlled motor and a stepper motor are given the necessary signals to accurately control the turntable and platform supporting the air bearing. Preliminary performance data is presented. Mechanical elements of the table and platform are described in detail. A wireless (RF) data path for all devices on the spacecraft model to an off-table command computer is also described.

Halsmer, Dominic↗

Availability of positioning and receiver autonomous integrity monitoring for the global positioning system

Receiver-autonomous integrity monitoring (RAIM) of GPS data is examined by means of a simulation of the availability of a RAIM system that can provide both a GPS coverage model and a Markov reliability model. State probabilities of GPS failure scenarios are assigned with the Markov model with a maximum of 6 simultaneous satellite failures. The parametric analysis of the failures on GPS RAIM availability includes the maximum allowable value of the horizontal dilution of precision (HDOP), the mean time to repair, and the efficacy of incorporating altimeter measurements. When the HDOP requirement is relaxed the number of RAIM outages is minimized, and poor satellite geometry can lead to a large HDOP. The use of an altimeter can also reduce outages, and RAIM availability increases with optimistic values for the mean time to repair.

Kline, Paul A.↗

Quadrature-multiplex modulation system with application to the Orbiter's Ku-Band link

This paper describes a new frequency multiplex scheme called quadrature-multiplex (QM) modulation which generates the interplexed signal with a simpler system structure and even smaller intermodulation loss than the interplex modulation system under a situation where the data rate of one signal is much greater than those of other signals to be multiplexed. A QM modulator and receiver systems are proposed. The performances of the QM systems are evaluated and compared to the interplex systems. Some design curves are obtained to help the communication systems engineer design the QM system. Finally, a signal is designed using the QM for the Orbiter's Ku-Band return link.

Park, K. Y.↗

Planar GaAs diodes for THz frequency mixing applications

Schottky barrier diodes for terahertz applications are typically fabricated as a micron to sub-micron circular anode metallization on GaAs which is contacted with a sharp wire (whisker). This structure has the benefits of the simplicity of the fabrication of the diode chip, the minimal shunt capacitance of the whisker contact and the ability of the whisker wire to couple energy to the diode. However, whisker-contacted diodes are costly to assembly and difficult to qualify for space applications. Also, complex receiver systems which require many diodes are difficult to assemble. The objective of this paper is to discuss the advantages of planar Schottky diodes for high frequency receiver applications and to summarize the problems of advancing the planar technology to the terahertz frequency range. Section 2 will discuss the structure, fabrication and performance of state-of-the-art planar Schottky diodes. In Section 3 the problems of designing and fabricating planar diodes for terahertz frequency operation are discussed along with a number of viable solutions. Section 4 summarizes the need for further research and cooperation between diode designers and RF engineers.

Bishop, William L.↗

Lidar observation of ozone over Tsukuba (36 deg N, 140 deg E)

An ozone lidar system was installed at the National Institute for Environmental Studies (NIES) in Tsukuba, Japan in March 1988 and has been measuring vertical profiles of ozone (15 - 45 km) since September 1988. The lidar system consists of a XeCl (308 nm) excimer laser, its deuterium Raman shifter (339 nm), a XeF excimer laser (351 nm), a 2 m telescope, a receiving system and a data processing system. The precision of the derived ozone concentration is about 10 percent of an altitude of 40 km for a 4 hr observation. Temperature profiles (30 - 80 km) are also obtained from the Rayleigh scattering signals at 351 nm. Approximate 50 ozone measurements are carried out in a year and variations of vertical profiles of ozone such as seasonal variations and shorter-term variations are observed. Systematic errors due to aerosols had been negligible until the arrival of the stratospheric aerosols injected by the eruption of Mt. Pinatubo. Effects of the volcanic aerosols on ozone measurements depend on the differences between wavelengths used as the on- and off-resonance.

Nakane, H.↗