Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radiation Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Weak soft X-ray excesses need not result from the high-frequency tail of the optical/ultraviolet bump in active galactic nuclei

The broad-band ROSAT/EXOSAT X-ray spectra of six Seyfert 1 galaxies are fitted by a model consisting of a direct power law and a component due to reflection/reprocessing from a partially ionized, optically thick medium. The reflected spectrum contains emission features from various elements in the soft X-ray range. In all objects but one (Mrk 335), the fit is satisfactory, and no additional soft X-ray excess is required by the data. This means that in most sources there is no need for the thermal 'big blue bumps' to extend into soft X-rays, and the soft X-ray excesses reported previously can be explained by reflection/reprocessing. Satisfactory fits are obtained for a medium ionized by a source radiating at less than or approximately 15% of the Eddington rate. The fits require that the reflection is enhanced relative to an isotropically emitting source above a flat disk. The necessary high effectiveness of reflection in the soft X-ray band requires strong soft thermal flux dominating over hard X-rays.

Czerny, Bozena↗

Improved nucleonic coal-thickness monitor

Design for coal-thickness-sensing instrument features independent hydropneumatic suspension of radiation source and detector. Monitor uses source and detector which are independently mounted, to follow contour of coal surface more closely and to eliminate errors caused by variations in airgap along radiation path. Device may help to bring fully-automated coal mining closer to reality.

Crouch, C. E.↗

Signal Restoration of Non-stationary Acoustic Signals in the Time Domain

Signal restoration is a method of transforming a nonstationary signal acquired by a ground based microphone to an equivalent stationary signal. The benefit of the signal restoration is a simplification of the flight test requirements because it could dispense with the need to acquire acoustic data with another aircraft flying in concert with the rotorcraft. The data quality is also generally improved because the contamination of the signal by the propeller and wind noise is not present. The restoration methodology can also be combined with other data acquisition methods, such as a multiple linear microphone array for further improvement of the test results. The methodology and software are presented for performing the signal restoration in the time domain. The method has no restrictions on flight path geometry or flight regimes. Only requirement is that the aircraft spatial position be known relative to the microphone location and synchronized with the acoustic data. The restoration process assumes that the moving source radiates a stationary signal, which is then transformed into a nonstationary signal by various modulation processes. The restoration contains only the modulation due to the source motion.

Babkin, Alexander S.↗

Discrete ordinates solutions of nongray radiative transfer with diffusely reflecting walls

Nongray gas radiation in a plane parallel slab bounded by gray, diffusely reflecting walls is studied using the discrete ordinates method. The spectral equation of transfer is averaged over a narrow wavenumber interval preserving the spectral correlation effect. The governing equations are derived by considering the history of multiple reflections between two reflecting wails. A closure approximation is applied so that only a finite number of reflections have to be explicitly included. The closure solutions express the physics of the problem to a very high degree and show relatively little error. Numerical solutions are obtained by applying a statistical narrow-band model for gas properties and a discrete ordinates code. The net radiative wail heat fluxes and the radiative source distributions are obtained for different temperature profiles. A zeroth-degree formulation, where no wall reflection is handled explicitly, is sufficient to predict the radiative transfer accurately for most cases considered, when compared with increasingly accurate solutions based on explicitly tracing a larger number of wail reflections without any closure approximation applied.

Menart, J. A.↗

Ultraviolet technology.

UV technology, discussing radiation sources, photodetectors, filters, polarizers, reflective coatings, etc

PHOTOGRAPHIC RECORDING INSTRUMENT↗

Limitations on thermal and nonthermal models for the radiation from extragalactic sources.

Both thermal and nonthermal models for the radiation from QSOs and Seyfert galaxies are discussed in terms of the size limitations imposed by the models. It is concluded that if daily fluctuations in the luminosity of Seyfert galaxies are confirmed and do represent a maximum size for the sources, then neither dust models nor ordinary synchrotron models can explain the radiation. Colgate's proposal involving the production of infrared radiation by a nonthermal plasma is considered, and a more detailed theory is derived which indicates that the process cannot produce infrared radiation.

Jones, T. W.↗

Characterizing Black Hole Mergers

Binary black hole mergers are a promising source of gravitational waves for interferometric gravitational wave detectors. Recent advances in numerical relativity have revealed the predictions of General Relativity for the strong burst of radiation generated in the final moments of binary coalescence. We explore features in the merger radiation which characterize the final moments of merger and ringdown. Interpreting the waveforms in terms of an rotating implicit radiation source allows a unified phenomenological description of the system from inspiral through ringdown. Common features in the waveforms allow quantitative description of the merger signal which may provide insights for observations large-mass black hole binaries.

Baker, John↗

Understanding Radiation Environment at Earth and Beyond: Overview of Two Projects

The impact of radiation dramatically increases at high altitudes in the Earth’s atmosphere and in space. Therefore, monitoring and access to radiation environment measurements are critical for estimating the radiation exposure risks of aircraft and spacecraft crews and the impact of space weather disturbances on electronics. Addressing these needs requires reliable access to multi-source radiation environment data and enhanced visualization and search capabilities. The Radiation Data Portal provides an interactive web-based application for convenient search and visualization of inflight radiation measurements.

SMD↗

In-Situ Testing Methods for Mixed-Mode Harsh Environments

Future NASA missions are driving a need for instrumentation and space electronics that will operate at extreme temperatures, with low mass and extended deployments. This need results in devices that will experience dose damage at both low and high temperatures that will suppress annealing and induce accelerated wear out issues. Therefore, the ability to perform radiation tests on devices at temperature is critical. This paper analyses the methods and process to enable these test as developed at the JPL Dynamitron Facility. Since electronics are the radiation source for this facility, the steps to ensure parity with cobalt-60 testing are discussed. Also discussed are the implications for system level testing and mixed radiation mode testing for highly integrated and scaled devices.

Scheick, Leif Z↗

Radiation Data Portal: Enhancing Data Discoverability and Analysis for Understanding Space Radiation in Earth Environment

The impact of radiation dramatically increases at high altitudes in the Earth’s atmosphere and in space. Therefore, monitoring and access to radiation environment measurements are critical for estimating the radiation exposure risks of aircraft and spacecraft crews and the impact of space weather disturbances on electronics. Addressing these needs requires reliable access to multi-source radiation environment data and enhanced visualization and search capabilities. The Radiation Data Portal provides an interactive web-based application for convenient search and visualization of in-flight radiation measurements.

Heliophysics↗

Infrared, X-ray, and XUV astrophysics

An observational program covering wavelengths from the near infrared to 1 millimeter is reviewed. The program of millimeter observations largely consisted of analyzing previous observations since the summer humidity was too high for new observations. Maps of millimeter emission from W3, Sgr B2, W49 and M42 were made. Five extragalactic sources were detected and are discussed. Energy distributions of several of the discrete sources at the Galactic Center were studied. A 5-year visual/infrared program on Markarian galaxies is discussed which showed the presence of both thermal and nonthermal infrared radiation sources and established correlations between the infrared sources and the emission line regions. The Nova Cygnus 1975, caught during its rise as well as subsequent dimming, is also discussed. Several other continuing programs are described, including studies of dark clouds and CO maser sources.

Source record↗

A hot wire radiant energy source for mapping the field of view of a radiometer

The design and performance of a calibration device that allows the measurement of a radiometer's field of view are described. The heart of the device is a heated 0.0254-mm (0.001-inch) diameter filament that provides a variable, isothermal line source of radiant energy against a cold background. By moving this discrete line source across the field of view of a radiometer, the radiometer's spatial response can be completely mapped. The use of a platinum filament provides a durable radiation source whose temperature is stable and repeatable to 10 K over the range of 600 to 1200 K. By varying the energy emitted by the filament, the field of view of radiometers with different sensitivities (or multiple channel radiometers) can be totally mapped.

Edwards, S. F.↗

Fade measurements at L-band and UHF in mountainous terrain for land mobile satellite systems

Fading results related to land mobile satellite communications at L-band (1502 MHz) and UHF (870 MHz) are described. These results were derived from an experiment performed in a series of canyon passes in the Boulder, Colorado region of the US. The experimental configuration involved a helicopter as the source platform, which maintained a relatively fixed geometry with a mobile van containing the receiver and data-acquisition system. An unobstructed line of sight between the radiating sources and the receiving van was, for the most part, also maintained. In this configuration, the dominant mechanism causing signal fading (or enhancement) is a result of multipath. The resulting fade distributions demonstrated that at the 1 percent and 5 percent levels, 5.5- and 2.6-dB fades were on the average exceeded at L-band and 4.8- and 2.4-dB at UHF, respectively, for a path elevation angle of 45 deg. The canyon results as compared with previous roadside-tree-shadowing results demonstrate that the deciding factor dictating fade margin for future land mobile satellite systems is tree shadowing rather than fades caused by multipath.

Vogel, Wolfhard J.↗

Foam With Direction: Unraveling the Anisotropic Radiation Shielding Properties of 2D Boron Nitride Nanoplatelet Foams

Neutron radiation exposure is one of the main challenges faced during space missions. There is a critical need for advanced lightweight radiation shielding materials. Two-dimensional (2D) boron nitride nanoplatelets (BNNP) are excellent candidates for polymer matrix nanofillers due to their superior neutron shielding and thermal and mechanical properties. Furthermore, the 2D material anisotropic behavior unlocks the potential for composite property tailoring. This study fabricated ultra- lightweight lamellar BNNP foams (density 0.05 g cm –3 and 97.5% porous) via freeze-drying processing. The neutron shielding effectiveness or mass absorption coefficient of the BNNP foams with walls perpendicular to the direction of the radiation source was 14.47 cm 2 g –1 , while that of the foam with parallel configuration was only 8.51 cm 2 g –1 . The orientation-dependent neutron radiation shielding properties were modeled using the Beer-Lambert law for porous composite materials. The BNNP foam in this study has the potential to benefit advanced tailorable radiation shielding technologies for future aerospace missions.

Radiation shielding↗

Fusion burn-propagation simulations using the collisional and radiative particle-in-cell code TRIFORCE

The ability to accurately model burn propagation in inertial confinement fusion plasmas is crucial for advancing fusion energy research. This work presents enhancements to the triforce hybrid fluid-kinetic multiphysics code, focusing on its kinetic half, which employs the particle-in-cell (PIC) method with Monte Carlo collisions (MCC). We use a moment-preserving collision model that mitigates numerical noise, particularly in spherical geometries where particle weights vary significantly. Additionally, we refine the treatment of inverse bremsstrahlung to account for electron–ion collision frequency reductions in degenerate plasmas and incorporate a blackbody radiation source to enable realistic photon injection. These improvements enable the simulation of 1-dimensional (1D) spherical fusion burn propagation in deuterium–tritium plasmas. Benchmark comparisons with the hydra radiation-hydrodynamics code confirm that triforce accurately captures the dynamics of hot-spot expansion and burn propagation, demonstrating sensitivity to ignition thresholds consistent with theoretical models. Findings show the ignition cliff to be less steep in our work compared to radiation-hydrodynamic modeling. These results highlight the role of kinetic effects in fusion ignition physics and underscore the necessity of hybrid fluid-kinetic models for advancing predictive capabilities in high-energy-density plasma systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection of the hot white dwarf in the magnetic nova V1500 Cygni with the Hubble Space Telescope

A comprehensive investigation of the AM Herculis-like nova system V1500 Cyg is presented, featuring time-resolved spectrophotometry with the Faint Object Spectrograph (FOS) of the Hubble Space Telescope (HST), coeval optical circular spectropolarimetry and spectrophotometry, and new broadband polarimetry. A revised ephemeris for the rotating white dwarf refines our knowledge of the timescale for synchronization with the orbital period -- and for becoming a bona fide AM Herculis system -- to 170 +/- 8 yrs. Three features of the orbital-phase-dependent spectral energy distribution are keys for understanding the relative contributions of several radiation sources in this system: (1) the brightness and shape of the ultraviolet continuum, which rises abruptly at short wavelengths and shows no significant phase dependence for lambda less than 2200 A, (2) the greater than or equal to 1 mag variations in the optical continuum and emission-line fluxes, and (3) a spectral slope in the optical which is reddest when brightest. These data lead us to conclude that the hot, postnova white dwarf is the dominant source of ultraviolet flux and of the unusually large bolometric luminosity of the system, compared with typical active AM Herculis binaries. The flat mid-ultraviolet spectrum requires a radiation component in addition to the white dwarf photosphere. We consider three possible origins: (1) cyclotron emission, (2) relatively broad, optically thick accretion columns with lumps of dense gas, and/or (3) orbiting debris in a disklike geometry. Observational tests are suggested to distinguish among these alternatives.

Schmidt, Gary D.↗

Crystal structure and density of helium to 232 kbar

The properties of helium and hydrogen at high pressure are topics of great interest to the understanding of planetary interiors. These materials constitute 95 percent of the entire solar system. A technique was presented for the measurement of X-ray diffraction from single-crystals of low-Z condenses gases in a diamond-anvil cell at high pressure. The first such single-crystal X-ray diffraction measurements on solid hydrogen to 26.5 GPa were presented. The application of this technique to the problem of the crystal structure, equation of state, and phase diagram of solid helium is reported. Crucial for X-ray diffraction studies of these materials is the use of a synchrotron radiation source which provides high brillance, narrow collimation of the incident and diffracted X-ray beams to reduce the background noise, and energy-dispersive diffraction techniques with polychromatic (white) radiation, which provides high detection efficiency.

Mao, H. K.↗