SEARCH · Search NASA

Results for “Reduced order systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2009

SOI N-Channel Field Effect Transistors, CHT-NMOS80, for Extreme Temperatures

Extreme temperatures, both hot and cold, are anticipated in many of NASA space exploration missions as well as in terrestrial applications. One can seldom find electronics that are capable of operation under both regimes. Even for operation under one (hot or cold) temperature extreme, some thermal controls need to be introduced to provide appropriate ambient temperatures so that spacecraft on-board or field on-site electronic systems work properly. The inclusion of these controls, which comprise of heating elements and radiators along with their associated structures, adds to the complexity in the design of the system, increases cost and weight, and affects overall reliability. Thus, it would be highly desirable and very beneficial to eliminate these thermal measures in order to simplify system's design, improve efficiency, reduce development and launch costs, and improve reliability. These requirements can only be met through the development of electronic parts that are designed for proper and efficient operation under extreme temperature conditions. Silicon-on-insulator (SOI) based devices are finding more use in harsh environments due to the benefits that their inherent design offers in terms of reduced leakage currents, less power consumption, faster switching speeds, good radiation tolerance, and extreme temperature operability. Little is known, however, about their performance at cryogenic temperatures and under wide thermal swings. The objective of this work was to evaluate the performance of a new commercial-off-the-shelf (COTS) SOI parts over an extended temperature range and to determine the effects of thermal cycling on their performance. The results will establish a baseline on the suitability of such devices for use in space exploration missions under extreme temperatures, and will aid mission planners and circuit designers in the proper selection of electronic parts and circuits. The electronic part investigated in this work comprised of a CHT-NMOS80 high temperature N-channel MOSFET (metal-oxide semiconductor field-effect transistor) device that was manufactured by CISSOID. This high voltage, medium-power transistor is fabricated using SOI processes and is designed for extreme wide temperature applications such as geothermal well logging, aerospace and avionics, and automotive industry. It has a high DC current capability and is specified for operation in the temperature range of -55 C to +225 C

Patterson, Richard L.↗

NASA NTRS2010

External and Turbomachinery Flow Control Working Group

Broad Flow Control Issues: a) Understanding flow physics. b) Specific control objective(s). c) Actuation. d) Sensors. e) Integrated active flow control system. f) Development of design tools (CFD, reduced order models, controller design, understanding and utilizing instabilities and other mechanisms, e.g., streamwise vorticity).

Ahmadi, G.↗

NASA NTRS2008

Path Length Control in a Nulling Coronagraph with a MEMS Deformable Mirror and a Calibration Interferometer

We report progress on a nulling coronagraph intended for direct imaging of extrasolar planets. White light is suppressed in an interferometer, and phase errors are measured by a second interferometer. A 1020-pixel MEMS deformable mirror in the first interferometer adjusts the path length across the pupil. A feedback control system reduces deflections of the deformable mirror to order of 1 nm rms.

MEMS adaptive optics↗

NASA NTRS2011

Fast Approximate Broadband Phase Retrieval for Segmented Systems

Broadband phase retrieval needed when: a) Narrow spectral filters are unavailable. b) Dim sources. c) Low throughput due to misalignment. d) Short exposures times. i.e., Pointing instability (space); and Atmospheric instability (ground based AO). Traditional approach is computationally burdensome for extreme bandwidths. Approximate approach: a) Substitute monochromatic model. b) Blur model and data. Test case performance: a) approx.270x reduction in computational cost for FGS-like test case. b) Good accuracy for monolithic system. c) Acceptable accuracy for segmented systems. i.e., Reduced by diffraction and Reduced by higher order segment model.

Jurling, Alden S.↗

NASA NTRSDate not supplied

Three-Dimensional Nonequilibrium Boundary Layer Stability & Transition Analysis For Martian Entry

In this work, we apply the boundary layer stability code LASTRAC, modified to include chemical and thermal nonequilibrium capabilities, to a simulated test case based on literature, with three-dimensional effects. LASTRAC provides Parabolized Stability Equations (PSE)as well as Linear Stability Theory (LST) to predict the stability of a boundary layer and transition with semiempirical eN methods. Tests of the Mars Science Laboratory (MSL)indicated a range of laminar to transitional flow conditions. In order to reduce the weight of Thermal Protection Systems (TPS), reliable prediction of transition and an understanding of the environmental factors that contribute to transition are necessary. This work is a step towards addressing this need, including the effects of thermochemical nonequilibrium but neglecting radiation, ablation, and ionization effects. Our results indicate that an oblique first mode produces maximum N-Factors on the symmetry plane, however with N-Factors too small to explain transition. Although we are able to show nonequilibrium three-dimensional PSE results inCO2, further study with improved mean flow solutions, accounting for some of the uncertainties inherent in this analysis, or evaluation of alternative transition mechanisms is needed to explain transition in the wind tunnel cases examined here.

H L Kline↗

NASA NTRS1992

Application of unsymmetric block Lanczos vectors in system identification

This paper demonstrates a new system identification approach of using Lanczos coordinates in place of modal coordinates. Identified experimental Lanczos vectors can be directly used in many structural dynamics analysis applications. A multi-input, multi-output frequency-domain technique was used to extract system matrices and an unsymmetric block Lanczos algorithm was used to reduce the order of the experimental model. A cantilever beam example showed promising results, indicating that a new system identification approach using Lanczos coordinates is worthy of further study.

Kim, H. M., Jr.↗

NASA NTRS1993

The MSAT spacecraft of Telesat Mobile Inc.

The MSAT spacecraft of the Canadian mobile satellite operator, Telesat Mobile Inc. (TMI) is described. When launched in 1994, the large geostationary MSAT spacecraft which is currently under construction by Hughes Aircraft Co. and Spar Aerospace Ltd. will enable TMI to provide mobile and transportable communications services to its customers even in the most remote parts of the North American continent. The main elements of TMI's mobile satellite system (described in a companion paper) are the space segment and the ground segment. TMI's space segment will employ one of two nearly identical satellites, one of which will be owned and operated by TMI, the other by the U.S. mobile satellite operator, American Mobile Satellite Corporation (AMSC). The two companies are participating in a joint spacecraft procurement in order to reduce the nonrecurring costs and to ensure system compatibility between the two systems; and they have also agreed to provide in-orbit backup to each other in the event of a catastrophic satellite failure. The program status, performance requirements, main parameters, and configuration of the MSAT spacecraft are reviewed. The major features of the communications subsystem are discussed in some detail, and a brief summary is presented of the spacecraft service module. Key technology items include the L-band RF power amplifier, which must operate with a high DC to RF power efficiency and generate low intermodulation when loaded with multi-carrier signals; and the large diameter deployable L-band antenna. The development status and expected performance of these spacecraft components is examined.

Bertenyi, E.↗

NASA NTRS2010

Anamorphic Imaging with Three Mirrors: A Survey

Design methods are described for unobstructed, plane-symmetric, anamorphic systems composed of three mirrors. Low order imaging constraints are used to reduce the dimensionality of the configuration space. Examples are presented from a specific class of systems with fixed packaging constraints.

Howard, Joseph M.↗

NASA NTRS2023

Cleaning up the Coasts: A System for the Removal of Marine Microplastics Using Semi-Autonomous Vehicles

In recent years, microplastic pollution has become an increasingly threatening problem for ocean ecosystems. With only 9% of plastics being successfully recycled, many end up in oceans where they break down into small particles less than 5 millimeters in length known as microplastics. These microplastics pose a threat to ocean wildlife, as many sea creatures are harmed by accidentally consuming them. Microplastics also end up contaminating human water and food supply. This report presents a system with the goal of identifying and collecting microplastics near coastlines in order to reduce the number of microplastics in the ocean that pose a threat to wildlife. The system consists of a combination of air and sea drones to locate and collect the microplastics, as well as charging stations to allow the drones to operate for extended periods of time. If implemented, this system will help combat microplastic pollution in oceans by preventing plastics from leaving the coastlines and going deeper where they could harm wildlife.

ocean cleanup↗

NASA NTRS1998

A Method for Generating Reduced-Order Linear Models of Multidimensional Supersonic Inlets

Simulation of high speed propulsion systems may be divided into two categories, nonlinear and linear. The nonlinear simulations are usually based on multidimensional computational fluid dynamics (CFD) methodologies and tend to provide high resolution results that show the fine detail of the flow. Consequently, these simulations are large, numerically intensive, and run much slower than real-time. ne linear simulations are usually based on large lumping techniques that are linearized about a steady-state operating condition. These simplistic models often run at or near real-time but do not always capture the detailed dynamics of the plant. Under a grant sponsored by the NASA Lewis Research Center, Cleveland, Ohio, a new method has been developed that can be used to generate improved linear models for control design from multidimensional steady-state CFD results. This CFD-based linear modeling technique provides a small perturbation model that can be used for control applications and real-time simulations. It is important to note the utility of the modeling procedure; all that is needed to obtain a linear model of the propulsion system is the geometry and steady-state operating conditions from a multidimensional CFD simulation or experiment. This research represents a beginning step in establishing a bridge between the controls discipline and the CFD discipline so that the control engineer is able to effectively use multidimensional CFD results in control system design and analysis.

Chicatelli, Amy↗

NASA NTRS2013

Dry wind tunnel system

This invention is a ground flutter testing system without a wind tunnel, called Dry Wind Tunnel (DWT) System. The DWT system consists of a Ground Vibration Test (GVT) hardware system, a multiple input multiple output (MIMO) force controller software, and a real-time unsteady aerodynamic force generation software, that is developed from an aerodynamic reduced order model (ROM). The ground flutter test using the DWT System operates on a real structural model, therefore no scaled-down structural model, which is required by the conventional wind tunnel flutter test, is involved. Furthermore, the impact of the structural nonlinearities on the aeroelastic stability can be included automatically. Moreover, the aeroservoelastic characteristics of the aircraft can be easily measured by simply including the flight control system in-the-loop. In addition, the unsteady aerodynamics generated computationally is interference-free from the wind tunnel walls. Finally, the DWT System can be conveniently and inexpensively carried out as a post GVT test with the same hardware, only with some possible rearrangement of the shakers and the inclusion of additional sensors.

Chen, Ping-Chih↗

NASA NTRS1990

Analysis and design of algorithm-based fault-tolerant systems

An important consideration in the design of high performance multiprocessor systems is to ensure the correctness of the results computed in the presence of transient and intermittent failures. Concurrent error detection and correction have been applied to such systems in order to achieve reliability. Algorithm Based Fault Tolerance (ABFT) was suggested as a cost-effective concurrent error detection scheme. The research was motivated by the complexity involved in the analysis and design of ABFT systems. To that end, a matrix-based model was developed and, based on that, algorithms for both the design and analysis of ABFT systems are formulated. These algorithms are less complex than the existing ones. In order to reduce the complexity further, a hierarchical approach is developed for the analysis of large systems.

Nair, V. S. Sukumaran↗

NASA NTRS1990

Linear and non-linear dynamic models of a geared rotor-bearing system

A three degree of freedom non-linear model of a geared rotor-bearing system with gear backlash and radial clearances in rolling element bearings is proposed here. This reduced order model can be used to describe the transverse-torsional motion of the system. It is justified by comparing the eigen solutions yielded by corresponding linear model with the finite element method results. Nature of nonlinearities in bearings is examined and two approximate nonlinear stiffness functions are proposed. These approximate bearing models are verified by comparing their frequency responses with the results given by the exact form of nonlinearity. The proposed nonlinear dynamic model of the geared rotor-bearing system can be used to investigate the dynamic behavior and chaos.

Kahraman, Ahmet↗

NASA NTRS1980

Reduced-order Kalman filtering with incomplete observability

Kalman filtering is considered with reference to linear stochastic dynamic systems without complete observability. It is shown that the canonical decomposition theorem can be extended to the stochastic case and the matrix Riccati equation of the Kalman filter is order-reducible if some states are not observable. The inclusion of unobservable states in Kalman filtering makes the unobservable states 'asymptotically' observable in the filter if these unobservable states are dynamically connected to observable states and asymptotically stable. The reduced-order Kalman filter saves computation time when compared to the conventional Kalman filter.

Yonezawa, K.↗

NASA NTRS2015

The Two-Phase Flow Separator Experiment Breadboard Model: Reduced Gravity Aircraft Results

Life support systems in space depend on the ability to effectively separate gas from liquid. Passive cyclonic phase separators use the centripetal acceleration of a rotating gas-liquid mixture to carry out phase separation. The gas migrates to the center, while gas-free liquid may be withdrawn from one of the end plates. We have designed, constructed and tested a breadboard that accommodates the test sections of two independent principal investigators and satisfies their respective requirements, including flow rates, pressure and video diagnostics. The breadboard was flown in the NASA low-gravity airplane in order to test the system performance and design under reduced gravity conditions.

phase separation↗

NASA NTRS2001

System Identification and POD Method Applied to Unsteady Aerodynamics

The representation of unsteady aerodynamic flow fields in terms of global aerodynamic modes has proven to be a useful method for reducing the size of the aerodynamic model over those representations that use local variables at discrete grid points in the flow field. Eigenmodes and Proper Orthogonal Decomposition (POD) modes have been used for this purpose with good effect. This suggests that system identification models may also be used to represent the aerodynamic flow field. Implicit in the use of a systems identification technique is the notion that a relative small state space model can be useful in describing a dynamical system. The POD model is first used to show that indeed a reduced order model can be obtained from a much larger numerical aerodynamical model (the vortex lattice method is used for illustrative purposes) and the results from the POD and the system identification methods are then compared. For the example considered, the two methods are shown to give comparable results in terms of accuracy and reduced model size. The advantages and limitations of each approach are briefly discussed. Both appear promising and complementary in their characteristics.

Tang, Deman↗

DOE OSTI2025

Generative learning for slow manifolds and bifurcation diagrams

In dynamical systems characterized by separation of time scales, the approximation of so called “slow manifolds”, on which the long term dynamics lie, is a useful step for model reduction. Initializing on such slow manifolds is a useful step in modeling, since it circumvents fast transients, and is crucial in multiscale algorithms (like the equation-free approach) alternating between fine scale (fast) and coarser scale (slow) simulations. In a similar spirit, when one studies the infinite time dynamics of systems depending on parameters, the system attractors (e.g., its steady states) lie on bifurcation diagrams (curves for one-parameter continuation, and more generally, on manifolds in state parameter space. Sampling these manifolds gives us representative attractors (here, steady states of ODEs or PDEs) at different parameter values. Algorithms for the systematic construction of these manifolds (slow manifolds, bifurcation diagrams) are required parts of the “traditional” numerical nonlinear dynamics toolkit. In more recent years, as the field of Machine Learning develops, conditional score-based generative models (cSGMs) have been demonstrated to exhibit remarkable capabilities in generating plausible data from target distributions that are conditioned on some given label. It is tempting to exploit such generative models to produce samples of data distributions (points on a slow manifold, steady states on a bifurcation surface) conditioned on (consistent with) some quantity of interest (QoI, observable). In this work, we present a framework for using cSGMs to quickly (a) initialize on a low-dimensional (reduced-order) slow manifold of a multi-time-scale system consistent with desired value(s) of a QoI (a “label”) on the manifold, and (b) approximate steady states in a bifurcation diagram consistent with a (new, out-of-sample) parameter value. This conditional sampling can help uncover the geometry of the reduced slow-manifold and/or approximately “fill in” missing segments of steady states in a bifurcation diagram. Finally, the quantity of interest, which determines how the sampling is conditioned, is either known a priori or identified using manifold learning-based dimensionality reduction techniques applied to the training data.

Dynamical systems↗

NASA NTRS1982

On the modelling and simulation of the dynamics and control of large flexible orbiting systems

This paper attempts to review the steps involved in the development of mathematical models that can be used to simulate the in-orbit dynamics of large flexible systems. The use of graph theoretic techniques can often be used to reduce the computational effort involved for calculating the eigenvalues of large ordered systems. Computer generated graphical techniques may provide additional insight into the understanding of elastic modal shape functions of complex systems. Finally the numerical techniques commonly used to develop shape and attitude control laws will be briefly reviewed.

Bainum, P. M.↗