SEARCH · Search NASA

Results for “Regoliths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Nanoscale Mineralogy and Composition of Experimental Regolith Agglutinates Produced under Asteroidal Impact Conditions

On the Moon, the energetics of smaller impactors and the physical/chemical characteristics of the granular regolith target combine to form a key product of lunar space weathering: chemically reduced shock melts containing optically-active nanophase Fe metal grains (npFe0) [1]. In addition to forming the optically dark glassy matrix phase in lunar agglutinitic soil particles [1], these shock melts are becoming increasingly recognized for their contribution to optically active patina coatings on a wide range of exposed rock and grain surfaces in the lunar regolith [2]. In applying the lessons of lunar space weathering to asteroids, the potential similarities and differences in regolith-hosted shock melts on the Moon compared to those on asteroids has become a topic of increasing interest [3,4]. In a series of impact experiments performed at velocities applicable to the asteroid belt [5], Horz et al. [6] and See and Horz [7] have previously shown that repeated impacts into a gabbroic regolith analog target can produce melt-welded grain aggregates morphologically very similar to lunar agglutinates [6,7]. Although these agglutinate-like particles were extensively analyzed by electron microprobe and scanning electron microscopy (SEM) as part of the original study [7], a microstructural and compositional comparison of these aggregates to lunar soil agglutinates at sub-micron scales has yet to be made. To close this gap, we characterized a representative set of these aggregates using a JEOL 7600 field-emission scanning electron microscope (FE-SEM), and JEOL 2500SE field-emission scanning transmission electron microscope (FE-STEM) both optimized for energy dispersive X-ray spectroscopy (EDX) compositional spectrum imaging at respective analytical spatial resolutions of 0.5 to 1 micron, and 2 to 4 nm.

Christoffersen, Roy↗

NASA NTRS2007

Concentrations of Volatiles in the Lunar Regolith

To set lower and upper limits on the overall amounts and types of volatiles released during heating of polar regolith, we examined the data for equatorial lunar regolith and for the compositions of comets. The purpose, specifically, was to answer these questions: 1. Upper/Lower limits and 'best guess' for total amount of volatiles (by weight %) released from lunar regolith up to 150C 2. Upper/Lower limit and 'best guess' for composition of the volatiles released from the lunar regolith by weight %

Taylor, Jeff↗

NASA NTRS2013

Method for Processing Lunar Regolith Using Microwaves

A paper describes a method of using microwave heating experiments on lunar simulants to determine the mechanism that causes lunar regolith to be such an excellent microwave absorber. The experiments initially compared the effects of sharp particle edges to round particle edges on the heating curves. For most compositions, sharp particle edged samples were more effective in being heated by microwaves than round particle edged materials. However, the experiments also showed an unexpected effect for both types of particles. Upon heating the sample surface above 400 C, the sample experienced some sort of internal structure change that caused it to heat much more efficiently. This enhancement may be associated with the unique microwave volumetric heating that can produce a large temperature gradient within the sample leading to melting of some components at the center of the sample. This new effect that may also be happening in lunar regolith samples is probably the cause of the previously observed enhanced heating of a sample of lunar regolith. Properly designed microwave applicators could heat and solidify the lunar regolith to form roads and building blocks for structures needed on the Moon

Barmatz, Martin B.↗

NASA NTRS2014

Compositional Diversity of the Vestan Regolith Derived from Howardite Compositions and Dawn VIR Spectra

Howardite, eucrite and diogenite meteorites likely come from asteroid 4 Vesta [1]. Howardites - physical mixtures of eucrites and diogenites - are of two subtypes: regolithic howardites were gardened in the true regolith; fragmental howardites are simple polymict breccias [2]. The Dawn spacecraft imaged the howarditic surface of Vesta with the visible and infrared mapping spectrometer (VIR) resulting in qualitative maps of the distributions of distinct diogenite-rich and eucrite-rich terranes [3, 4]. We are developing a robust basis for quantitative mapping of the distribution of lithologic types using spectra acquired on splits of well-characterized howardites [5, 6]. Spectra were measured on sample powders sieved to <75 μm in the laboratories of the Istituto di Astrofisica e Planetologia Spaziali and Brown University. Data reduction was done using the methods developed to process Dawn VIR spectra [4]. The band parameters for the ~1 and ~2 μm pyroxene absorption features (hereafter BI and BII) can be directly compared to Dawn VIR results. Regolithic howardites have shallower BI and BII absorptions compared to fragmental howardites with similar compositions. However, there are statistically significant correlations between Al or Ca contents and BI or BII center wavelengths regardless of howardite subtype. Diogenites are poor in Al and Ca while eucrites are rich in these elements. The laboratory spectra can thus be directly correlated with the percentage of eucrite material contained in the howardites. We are using these correlations to quantitatively map Al and Ca distributions, and thus the percentage of eucritic material, in the current regolith of Vesta.

Mittlefehldt, D. W.↗

NASA NTRS2015

Asteroid Icy Regolith Excavation and Volatile Capture Project

Icy regolith simulants will be produced in a relevant vacuum environment using various minerals, including hydrated minerals, that are found in C-type meteorites and in other types of planetary regolith. This will allow us to characterize the mechanical strength of the icy regolith as a function of ice content using penetration, excavation, and sample capture devices. The results of this study will benefit engineers in designing efficient regolith excavators and ISRU processing systems for future exploration missions to asteroids and other planetary bodies.

Technology Portfolio System↗

NASA NTRS2015

Using Dust from Asteroids as Regolith Microsamples

Meteorite science is rich with compositional indicators by which we classify parent bodies, but few sample groups are definitively linked with asteroid spectra. More robust links need to be forged between meteorites and their parent bodies to understand the composition, diversity and distribution. A major link can be sample analysis of the parent body material and comparison with meteorite data. Hayabusa, the first sample return mission of the Japanese Aerospace Exploration Agency (JAXA), was developed to rendezvous with and collect samples from asteroid Itokawa and return them to Earth. Thousands of sub-100 micron particles were recovered, apparently introduced during the spacecraft impact into the surface of the asteroid, linking the asteroid Itokawa to LL chondrites [1]. Upcoming missions Hayabusa 2 and OSIRIS-REx will collect more significant sample masses from asteroids. In all these cases, the samples are or will be a collection of regolith particles. Sample return to earth is not the only method for regolith particle analysis. Dust is present around all airless bodies, generated by micrometeorite impact into their airless surfaces, which in turn lofts regolith particles into a "cloud" around the body. The composition, flux, and size-frequency distribution of dust particles can provide significant insight into the geological evolution of airless bodies [2]. For example, the Cassini Cosmic Dust Analyzer (CDA) detected salts in Enceladus' icy plume material, providing evidence for a subsurface ocean in contact with a silicate seafloor [3]. Similar instruments have flown on the Rosetta, LADEE, and Stardust missions. Such an instrument may be of great use in obtaining the elemental, isotopic and mineralogical composition measurement of dust particles originating from asteroids without returning the samples to terrestrial laboratories. We investigated the ability of a limited sample analysis capability using a dust instrument to forge links between asteroid regolith particles and known meteorite groups. We further set limits on the number of individual particles statistically needed to robustly reproduce a bulk composition.

microsamples↗

NASA NTRS2016

The Strata-l Experiment on Microgravity Regolith Segregation

The Strata-1 experiment studies the segregation of small-body regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). Many asteroids feature low bulk densities, which implies high values of porosity and a mechanical structure composed of loosely bound particles, (i.e. the "rubble pile" model), a prime example of a granular medium. Even the higher-density, mechanically coherent asteroids feature a significant surface layer of loose regolith. These bodies will evolve in response to very small perturbations such as micrometeoroid impacts, planetary flybys, and the YORP effect. A detailed understanding of asteroid mechanical evolution is needed in order to predict the surface characteristics of as-of-yet unvisited bodies, to understand the larger context of samples from sample return missions, and to mitigate risks for both manned and unmanned missions to asteroidal bodies. Due to observation of rocky regions on asteorids such as Eros and Itokawa, it has been hypothesized that grain size distribution with depth on an asteroid may be inhomogeneous: specifically, that large boulders have been mobilized to the surface. In terrestrial environments, this size-dependent sorting to the surface of the sample is called the Brazil Nut Effect. The microgravity and acceleration environment on the ISS is similar that of a small asteroid. Thus, Strata-1 investigates size segregation of regolith in an environment analogous to that of small bodies. Strata-1 consists of four regolith simulants in evacuated tubes, as shown in Figure 1 (Top and Middle). The simulants are (1) a crushed and sieved ordinary chondrite meteorite to simulate an asteroidal surface, (2) a carbonaceous chondrite simulant with a mixture of fine and course particles, and two simplified silicate glass simulants; (3) one with angular and (4) another with spherical particles. These materials were chosen to span a range of granular complexity. The materials were sorted into three size species pre-launch, and maintained during launch and return by a device called the Entrapulator. The hypothesis under test is that the particles that constitute a granular medium in a micro-gravity environment, subjected to a known vibration environemnt, will segregate in accordance to modeled predictions. Strata-1 is currently operating on ISS, with cameras capturing images of simulant motion throughout the one year mission. Vibration data is recorded and downlinked, and the simulants will be analyzed after return to Earth.

Fries, M.↗

NASA NTRS2016

The Strata-1 Regolith Dynamics Experiment: Class 1E Science on ISS

The Strata-1 experiment studies the evolution of small body regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). This study will record segregation and mechanical dynamics of regolith simulants in a microgravity and vibration environment similar to that experienced by regolith on small Solar System bodies. Strata-1 will help us understand regolith dynamics and will inform design and procedures for landing and setting anchors, safely sampling and moving material on asteroidal surfaces, processing large volumes of material for in situ resource utilization (ISRU) purposes, and, in general, predicting the behavior of large and small particles on disturbed asteroid surfaces. This experiment is providing new insights into small body surface evolution.

Fries, Marc↗

NASA NTRS2017

Boulder Distributions at Legacy Landing Sites: Assessing Regolith Production Rates and Landing Site Hazards

Understanding how the distribution of boulders on the lunar surface changes over time is key to understanding small-scale erosion processes and the rate at which rocks become regolith. Boulders degrade over time, primarily as a result of micrometeorite bombardment so their residence time at the surface can inform the rate at which rocks become regolith or become buried within regolith. Because of the gradual degradation of exposed boulders, we expect that the boulder population around an impact crater will decrease as crater age increases. Boulder distributions around craters of varying ages are needed to understand regolith production rates, and Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC) images provide one of the best tools for conducting these studies. Using NAC images to assess how the distribution of boulders varies as a function of crater age provides key constraints for boulder erosion processes. Boulders also represent a potential hazard that must be addressed in the planning of future lunar landings. A boulder under a landing leg can contribute to deck tilt, and boulders can damage spacecraft during landing. Using orbital data to characterize boulder populations at locations where landers have safely touched down (Apollo, Luna, Surveyor, Chang'e-3) provides validation for landed mission hazard avoidance planning. Additionally, counting boulders at legacy landing sites is useful because: 1) LROC has extensive coverage of these sites at high resolutions (approximately 0.5 meters per pixel). 2) Returned samples from craters at these sites have been radiometrically dated, allowing assessment of how boulder distributions vary as a function of crater age. 3) Surface photos at these sites can be used to correlate with remote sensing measurements.

Watkins, R. N.↗

NASA NTRS2017

Measuring Shock Stage of ltokawa Regolith Grains by Electron Back-Scattered Diffraction and Synchrotron X-Ray Diffraction

We have been analyzing Itokawa samples in order to definitively establish the degree of shock experienced by the regolith of asteroid Itokawa, and to devise a bridge between shock determinations by standard light optical petrography, crystal structures as determined by electron and X-ray diffraction techniques. We are making measurements of olivine crystal structures and using these to elucidate critical regolith impact processes. We use electron back-scattered diffraction (EBSD) and synchrotron X-ray diffraction (SXRD). We are comparing the Itokawa samples to L and LL chondrite meteorites chosen to span the shock scale experienced by Itokawa, specifically Chainpur (LL3.4, Shock Stage 1), Semarkona (LL3.00, S2), Kilabo (LL6, S3), NWA100 (L6, S4) and Chelyabinsk (LL5, S4). In SXRD we measure the line broadening of olivine reflections as a measure of shock stage. In this presentation we concentrate on the EBSD work. We employed JSC's Supra 55 variable pressure FEG-SEM and Bruker EBSD system. We are not seeking actual strain values, but rather indirect strain-related measurements such as extent of intra-grain lattice rotation, and determining whether shock state "standards" (meteorite samples of accepted shock state, and appropriate small grain size) show strain measurements that may be statistically differentiated, using a sampling of particles (number and size range) typical of asteroid regoliths. Using our system we determined that a column pressure of 9 Pa and no C-coating on the sample was optimal. We varied camera exposure time and gain to optimize mapping performance, concluding that 320x240 pattern pixilation, frame averaging of 3, 15 kV, and low extractor voltage yielded an acceptable balance of hit rate (>90%), speed (11 fps) and map quality using an exposure time of 30 ms (gain 650). We found that there was no strong effect of step size on Grain Orientation Spread (GOS) and Grain Reference Orientation Deviation angle (GROD-a) distribution; there was some effect on grain average Kernel Average Misorientation (KAM) (reduced with smaller step size for the same grain), as expected. We monitored GOS, Maximum Orientation Spread (MOS) and GROD-a differences between whole olivine grains and sub-sampled areas, and found that there were significant differences between the whole grain dataset and subsets, as well as between subsets, likely due to sampling-related "noise". Also, in general (and logically) whole grains exhibit greater degrees of cumulative lattice rotation. Sampling size affects the apparent strain character of the grain, at least as measured by GOS, MOS and GROD-a. There were differences in the distribution frequencies of GOS and MOS between shock stages, and in plots of MOS and GOS vs. grain diameter. These results are generally consistent with those reported this year. However, it is unknown whether the differences between samples of different shock states exceeds the clustering of these values to the extent that shock stage determinations can still be made with confidence. We are investigating this by examination of meteorites with higher shock stage 4 to 5. Our research will improve our understanding of how small, primitive solar system bodies formed and evolved, and improve understanding of the processes that determine the history and future of habitability of environments on other solar system bodies. The results will directly enrich the ongoing asteroid and comet exploration missions by NASA and JAXA, and broaden our understanding of the origin and evolution of small bodies in the early solar system, and elucidate the nature of asteroid and comet regolith.

Zolensky, Michael↗

NASA NTRS2016

Global Variations in Regolith Properties on Asteroid Vesta from Dawn's Low-Altitude Mapping Orbit

We investigate the depth, variability, and history of regolith on asteroid Vesta using data from the Dawn spacecraft. High-resolution (15-20 m pixel(sup -1)) Framing Cameraimages are used to assess the presence of morphologic indicators of a shallow regolith,including the presence of blocks in crater ejecta, spur-and-gully-type features in crater walls,and the retention of small (less than 300 m) impact craters. Such features reveal that the broad,regional heterogeneities observed on Vesta in terms of albedo and surface composition extend to the physical properties of the upper approx. 1 km of the surface. Regions of thin regolithare found within the Rheasilvia basin and at equatorial latitudes from approx. 0-90 deg. E and approx.260-360 deg. E. Craters in these areas that appear to excavate material from beneath the regolithhave more diogenitic (Rheasilvia, 090 deg. E) and cumulate eucrite (260-360 deg. E) compositions.A region of especially thick regolith, where depths generally exceed 1 km, is found from approx.100-240 deg. E and corresponds to heavily cratered, low-albedo surface with a basaltic eucritecomposition enriched in carbonaceous chondrite material. The presence of a thick regolithin this area supports the idea that this is an ancient terrain that has accumulated a larger component of exogenic debris. We find evidence for the gardening of crater ejecta towardmore howarditic compositions, consistent with regolith mixing being the dominant form of "weathering" on Vesta.

asteroid↗

NASA NTRS2021

Insitu Lunar Launch & Landing Pad Construction w/ Regolith and Thermoset Polymers

This CIF project is an extension of materials developed under a previous NASA Innovative Advanced Concepts (NIAC) project titled “Regolith Derived Heat Shield for Planetary Body Entry and Descent Systems with In-Situ Fabrication” by M. Hogue et al. (2012). Launch and landing pads are necessary to mitigate risks to lander/ascent vehicles, surface assets, and orbital assets from rocket plume ejected regolith. At this time, all launching and landing on the lunar surface will be on unprepared surface sites. Though this has been a successful approach for Apollo and other uncrewed missions, significant risks exist for the Artemis Program due to the increased thrust of the vehicles, presence of co-located assets, and potential surface level requirements for tall vehicles. This project developed a thermoset polymer–regolith composite material for use as a launch and landing pad. Test articles were prepared at 20% and 11% polymer mass percent (wt%) and tested under hot fire conditions that simulated large vehicle lunar launch/landing conditions. A minimum polymer wt% of 9% was achieved and both samples successfully mitigated regolith ejecta from plume effects. A concept for emplacing launch/landing pads was successfully tested in laboratory environments using a screw and barrel approach to mixing, conveying and depositing materials. It is recommended that materials and systems be developed to TRL 6 for a small-scale lunar demonstration of emplacement of a launch/landing pad via a Commercial Lunar Payload Services (CLPS) mission to support the Artemis Program.

Nathan Gelino↗

NASA NTRS2022

Rock Abundance on the Lunar Mare on Surfaces of Different Age: Implications for Regolith Evolution and Thickness

The growth of lunar regolith over time affects surface rock abundance, because larger, less frequent impacts are needed to penetrate thicker regolith developed on older surfaces and excavate rocks. On younger surfaces with thinner regolith, smaller, more frequent impacts are sufficient to excavate rocks. We quantify the correlation between observed rock abundances and age on the lunar surface by comparing Diviner rock abundance data to the surface ages of inter-crater parts on the maria. Our observations show the expected negative correlation between age and rock abundance. The commonality of non-zero rock abundance values on ancient surfaces, combined with a simple Monte Carlo model of the rock excavation process, suggest that rocks re-excavated from the regolith volume contribute to the presently observed rock population on the lunar surface. The half-life of meter-scale surface rocks most consistent with our observations is 80±20 Myr.

Sashank Vanga↗

NASA NTRSDate not supplied

3d Particle Geometry Characterization of Apollo Regolith Samples Via Laser Diffraction and Dynamic Image Analysis

Establishing a fundamental understanding of regolith mechanics hinges on the characterization of the foundational physical parameters that dictate granular particle interactions both on micro- and macro-scales. Specifically, particle size distribution, particle geometry and grain density govern the geotechnical properties, including compressibility, shear strength, hydraulic conductivity (i.e., permeability), void ratio (i.e., porosity), and thermal conductivity of the lunar regolith. The absence of terrestrial geologic processes on the lunar surface, a lack of water, clay minerals, and organic material in lunar soils, and the narrow compositional range in terms of mineral diversity of the regolith produces a unique problem when attempting to project terrestrial soil mechanics concepts to the lunar surface. Additionally, the occurrence of agglutinates, exclusive to the lunar surface, further disassociates the physical behavior (e.g., particle crushability, flowability, etc.) of regolith from that observed in terrestrial soils.

R. Kovtun↗

NASA NTRSDate not supplied

Millimeter Wave Doppler Radar Testing Using the Lunar Regolith Ejecta Simulator

A linear conveyor system has been devised to maintain lunar regolith simulant at a range of velocities, distances, angles, particle densities, and particle sizes. The Lunar Regolith Ejecta Simulator (LuRES) system shall test prototype and potential flight instrumentation for measuring the velocities of regolith particles accelerated by a plume-surface interaction (PSI) and determining effects of particle number densities and particle size distributions on return signals. Here we present the results of initial LuRES testing of the Millimeter Wave Doppler Radar (MWDR) instrument. The LuRES system held a single, ~900 µm BP-1 lunar regolith simulant particle at a continuous ~5 m/s velocity. The return signal of the MWDR from this LuRES configuration was analyzed to calibrate the MWDR instrument. Further testing is planned for the remaining of 2023 to calibrate the MWDR for various particle sizes and densities at a continuous velocity. These results will be presented in the final paper.

PSI↗

NASA NTRSDate not supplied

Coarsening Up: Expanding the Particle Size Distributions of Lunar Simulants to Encompass A Comprehensive Range of Regolith Granularity

Due to a paucity of lunar regolith samples, simulated granular materials (simulants) have been developed and deployed for a variety of engineering and research purposes in an attempt to meet the requirements for lunar exploration. Broadly speaking, these manufactured materials aim to replicate the compositional (i.e., mineralogy and chemistry) and physical (e.g., particle size distribution, particle shape) profiles of lunar soil samples collected during the Apollo missions. While creating a “near-perfect” lunar simulant is prohibitive due to the unique formative processes (i.e., meteorite impacts, solar wind implantation) and conditions (anhydrous, reducing environment and exposure to radiation on the surface over billions of years) encountered on the moon, certain granular properties of the regolith can be recreated with a high level of fidelity by leveraging contemporary technologies. A fundamental physical property and descriptor, grain size can be correlated between samples and replicated through processing; however, a holistic understanding of the particle size distribution of lunar regolith must be considered when creating analog materials. This study produces particle size distributions for Apollo 16 returned samples, incorporating the sieved out >1 cm coarse-grained fraction, in order to provide a more comprehensive characterization of surficial lunar regolith grain sizes for the development of highlands-type granular analog testing materials.

R. N. Kovtun↗

NASA NTRS2024

Electrodynamic Regolith Conveyor

NASA KSC’s Swamp Works Electrostatics and Surface Physics Laboratory (ESPL) is developing a 4-phase Electrodynamic Regolith Conveyor (ERC) that could convey regolith without the risk of rotating or vibratory actuation, which could jam or require regular maintenance due to the abrasive nature of Lunar regolith. A prototype conveyor has been developed for laboratory testing in a simulated Lunar gravity environment using a suborbital vehicle. The results of the project will be used for development of the 4-phase electrodynamic conveyors for Lunar ISRU, regolith surface sampling, and dust mitigation solutions.

Aaron Olson↗

NASA NTRSDate not supplied

Demonstration of in-Situ Resource Utilization of Lunar Regolith for Plant Growing Systems Through Scaled Capillary Models

The development of reliable and bioregenerative crop growth production systems is vital for human exploration into deep space. As the National Aeronautics and Space Administration (NASA) prepares for the Artemis missions, scientists need to find a way to provide consistent and sufficient water delivery for all stages of a plant’s life cycle. NASA has been able to successfully model passive flow through felt material, to mimic the water uptake and transport through a plant, in microgravity. However, more studies need to be conducted to adapt the model for a substrate-based system and incorporate how flow will change during each stage of plant growth. For future missions, payload requirements to support crop production systems will need to be limited, leading to the use of available resources, such as lunar regolith. Although numerous lunar regolith simulants are commercially available, few have been evaluated for their suitability in agricultural applications. First, a base regolith simulant will need to be identified based on its physical and chemical properties. Then, additional amendments to improve the properties of the simulants to support plant growth will be identified. The design and composition of the substrate will be based on water transport requirements for different stages of plant growth. Scaled capillary models can be utilized to study surface-tension driven flows through various designer substrates to modify the physical properties of the selected regolith simulant. These models can accurately represent how flow will act in a reduced gravity environment, which can be used to design a full-scale facility for surface missions. This project will aid space researchers in the design of future crop production systems for surface missions by creating a refined model that can be used at all stages of plant growth and utilize in situ resources.

Fluids↗