Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reversible”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mixed Ionic–Electronic Conductor of Perovskite Li x La y MO 3-δ toward Carbon-Free Cathode for Reversible Lithium–Air Batteries

Mixed ionic–electronic conductors (MIECs) can play a pivotal role in achieving high energies and power densities in rechargeable batteries owing to their ability to simultaneously conduct ions and electrons. In our study, a new strategy is proposed wherein late 3d transition metals (TMs) are substituted into a perovskite Li-ion conductor to transform it into a Li-containing MIEC. First-principles calculations show that perovskite Li x La y MO 3 with late 3d TMs have a low oxygen vacancy formation energy, implying high electron carrier concentrations corresponding to high electronic conductivity. The activation barriers for Li diffusion in Li x La y MO 3 (M = Ti, Cr, Mn, Fe, and Co) are below 0.411 eV, resulting in high Li-ion conductivity. The designed perovskites of Li0.34La 0.55 MnO 3-δ experimentally prove to have high electronic (2.04 × 10 -3 S cm -1 ) and Li-ion (8.53 × 10 -5 S cm -1 ) conductivities, and when applied in a carbon-free cathode of a Li–air cell, they deliver superior reversibility at 0.21 mAh cm -2 over 100 charge/discharge cycles while avoiding the degradation associated with carbonaceous materials. Finally, this strategy enables the effective design of Li-conducting MIEC and reversible Li–air batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible and Selective CO 2 to HCO 2 − Electrocatalysis near the Thermodynamic Potential

Abstract Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO 2 /HCO 2 − conversion catalyzed by [Pt(depe) 2 ] 2+ (depe=1,2‐ bis (diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO 2 reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO 2 reduction, H 2 evolution is negligible and the Faradaic efficiency for HCO 2 − production is nearly quantitative. A free‐energy analysis reveals H 2 evolution is endergonic, providing a thermodynamic basis for highly selective CO 2 reduction.

Cunningham, Drew W.↗
DOE OSTI2020

Real-time Atomic-scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Dynamic structural and chemical information of catalyst surface during a catalytic reaction is critical for deciphering the mechanisms governing the properties of catalysts. Transition-metal based catalysts have emerged as an important alternative to noble metal catalysts, but their catalytic mechanism remains largely elusive, complicated by dynamic structure and valence evolution. Herein, by using in situ aberration-corrected environmental transmission electron microscopy, we capture, for the first time at atomic level, the dynamic evolution of Cu surface during CO oxidation reaction. We discovered that, under reaction condition, the Cu surface is activated, typically involving 2-3 atomic layers with the formation of a reversible meta-stable phase that only exists during catalytic reactions. Further, we reveal the distinctive role of CO and O2 in the surface activation, featuring CO exposure to lead to surface roughening and consequently formation of low-coordinated Cu atoms, while O2 exposure to induce quasi-crystalline CuOx phase. Corrugated by DFT calculations, we rationalize crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.

Luo, Langli↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized covalent triazine framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154°C, with desorption complete at 250°C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60°C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. Here the resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

From Copper to Basic Copper Carbonate: A Reversible Conversion Cathode in Aqueous Anion Batteries

Abstract Dual‐ion batteries that use anions and cations as charge carriers represent a promising energy‐storage technology. However, an uncharted area is to explore transition metals as electrodes to host carbonate in conversion reactions. Here we report the reversible conversion reaction from copper to Cu 2 CO 3 (OH) 2 , where the copper electrode comprising K 2 CO 3 and KOH solid is self‐sufficient with anion‐charge carriers. This electrode dissociates and associates K + ions during battery charge and discharge. The copper active mass and the anion‐bearing cathode exhibit a reversible capacity of 664 mAh g −1 and 299 mAh g −1 , respectively, and relatively stable cycling in a saturated mixture electrolyte of K 2 CO 3 and KOH. The results open an avenue to use carbonate as a charge carrier for batteries to serve for the consumption and storage of CO 2 .

Gallagher, Trenton C.↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

Metastable metal hydrides such as AlH 3 have many attractive features as hydrogen storage media, but generally require complex reaction schemes for regeneration following H 2 release. Here in this paper, we demonstrate that the highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized Covalent Triazine Framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154 °C, with desorption complete at 250 °C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60 °C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. The resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

Coordination Chemistry↗
DOE OSTI2022

From Copper to Basic Copper Carbonate: A Reversible Conversion Cathode in Aqueous Anion Batteries

Dual-ion batteries that use anions and cations as charge carriers represent a promising energy-storage technology. However, an uncharted area is to explore transition metals as electrodes to host carbonate in conversion reactions. Here we report the reversible conversion reaction from copper to Cu 2 CO 3 (OH) 2 , where the copper electrode comprising K 2 CO 3 and KOH solid is self-sufficient with anion-charge carriers. This electrode dissociates and associates K + ions during battery charge and discharge. The copper active mass and the anion-bearing cathode exhibit a reversible capacity of 664 mAh g –1 and 299 mAh g –1 , respectively, and relatively stable cycling in a saturated mixture electrolyte of K 2 CO 3 and KOH. Finally, the results open an avenue to use carbonate as a charge carrier for batteries to serve for the consumption and storage of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Intercalation-Induced Reversible Electrochromic Behavior of Two-Dimensional Ti 3 C 2 T x MXene in Organic Electrolytes

MXenes, a large family of two-dimensional materials, have attracted tremendous attention due to their unique physical and chemical properties. Reversible ion intercalation between MXene layers allows modification of the optical, thermal, magnetic, and chemical properties. The electrochemical charge/discharge of MXenes in aqueous electrolytes was reported to lead to reversible electrochromic behavior. In this work, the electrochromic effect of semitransparent Ti 3 C 2 T x MXene film was probed by electrochemical intercalation of Li ions. Correspondingly, a peak shift of 100 nm was observed in the UV-vis spectrum. By combining in-situ Raman spectroscopy, in-situ X-ray diffraction, and density functional theory calculations, we show that the electrochromic shift is primarily due to the formation of robust O-Li bonds and the emerging bands induced changes of inter-band excitations. Finally, understanding the mechanism of electrochromic behavior in Ti 3 C 2 T x lays the foundations of designating 2D materials with durable, controllable, and efficient intercalation-induced electrochromic behaviors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reversible Iron Oxyfluoride (FeOF)–Graphene Composites as Sustainable Cathodes for High Energy Density Lithium Batteries

Two large barriers are impeding the wide implementation of electric vehicles, namely driving-range and cost, primarily due to the low specific energy and high cost of mono-valence cathodes used in lithium-ion batteries. Iron is the ideal element for cathode materials considering its abundance, low cost and toxicity. However, the poor reversibility of (de)lithiation and low electronic conductivity prevent iron-based high specific energy multi-valence conversion cathodes from practical applications. In this work, a sustainable FeOF nanocomposite is developed with extraordinary performance. The specific capacity and energy reach 621 mAh g –1 and 1124 Wh kg –1 with more than 100 cycles, which triples the specific capacity, and doubles the specific energy of current mono-valence intercalation LiCoO 2 . This is the result of an effective approach, combing the nanostructured FeOF with graphene, realized by making the (de)lithiation reversible by immobilizing FeOF nanoparticles and the discharge products over the graphene surface and providing the interparticle electric conduction. Importantly, it demonstrates that introducing small amount of graphene can create new materials with desired properties, opening a new avenue for altering the (de)lithiation process. Finally, such extraordinary performance represents a significant breakthrough in developing sustainable conversion materials, eventually overcoming the driving range and cost barriers.

25 ENERGY STORAGE↗
DOE OSTI2025

Kinetic and structural evidence for specific DMSO interference with reversible binding of uncharged bis-oximes to hAChE and their reactivation kinetics of OP-hAChE

The structural basis of inhibitory effect of organic solvent dimethyl sulfoxide (DMSO) on human acetylcholinesterase (EC 3.1.1.7; hAChE) was inferred from the effect of DMSO on kinetics of reversible inhibition of uncharged, heterocyclic bis-oximes to hAChE, from DMSO effect on rates of reactivation of inactive organophosphate (OP)-hAChE conjugates by bis-oximes and by X-ray structures of bis-oxime and DMSO binding to hAChE. Here, the reversible inhibition constant of DMSO for hAChE in 0.1 M phosphate buffer pH 7.4 at 22 °C, was K i = (0.32 ± 0.04) % (or 45 ± 5 mM). The K i of the bis-oxime LG-703 for hAChE was 3.2-fold larger in 1 % DMSO, consistent with direct competition between LG-703 and DMSO. The X-ray structure of the LG-703∗hAChE complex (PDB ID: 6U3P) shows DMSO and LG-703 bound to individual hAChE monomers, LG-703 in the chain A and DMSO in the chain B. In the co-crystallization both small molecules were present at a similar excess over their corresponding K i values for hAChE (7.8-fold for DMSO and 6.5-fold for LG-703) and formation of two different complexes (DMSO∗hAChE and LG-703∗hAChE), in the same crystal, appears consistent with inhibition kinetics. Furthermore, rates of reactivation of paraoxon-inhibited hAChE (POX-hAChE) and of VX-hAChE by LG-703 and by a novel heterocyclic bis-oxime LG-1922 were reduced 2 – 3-fold in DMSO, consistent with observation of the active-center-bound DMSO molecules in the newly solved structure of the LG-1922∗POX-hAChE complex presented here and in our POX-hAChE structure (PDB ID: 8DT2) showing obstruction of the reactivator access to the conjugated P atom.

Acetylcholinesterase inhibition↗
DOE OSTI2025

Reverse martensitic transformation on the corrosion behavior of a 2304 lean duplex stainless steel

This study investigates the influence of the reverse martensitic transformation on the corrosion behavior of 2304 lean duplex stainless steel (LDSS) at low temperatures (400–600°C). The steel underwent cold rolling, followed by isochronal annealing for 0.5 h. Phase transformations and microstructures were analyzed using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Corrosion resistance was evaluated using a syringe cell with cyclic potentiodynamic polarization in 0.6 M NaCl solution and double-loop electrochemical potentiokinetic reactivation in 0.5 M H 2 SO 4 + 0.001 M KSCN solution. A bimodal breakdown potential behavior, associated with either pitting or transpassivity, was observed in the as-received (AR) and samples annealed at 400°C. Pitting in the AR sample was associated with Al–Mg–Si–Ca–O inclusions, while pitting on the samples annealed at 400°C was linked to local reduced passive film resistance. Severe cold rolling enhanced the pitting resistance of 2304 LDSS. Selective electrochemical etching revealed preferential corrosion at phase interfaces and within the austenite phase. Additionally, annealing at 500°C to 600°C led to a marked decrease in pitting resistance and increased sensitization. Electron backscatter diffraction analysis of the corroded pits in the annealed specimens indicated that pits tend to nucleate and grow in α'-martensite/austenite regions. Furthermore, the nanostructure formed during low-temperature reversion, characterized by dislocation-cell martensite with high dislocation density and stacking faults, may adversely affect corrosion resistance due to heterogeneities associated with alloying element redistribution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reversible function switching of Ag catalyst in Mg/S battery with chloride-containing electrolyte

Rechargeable Mg/S batteries suffer from fast capacity decay because of the difficult re-oxidation of MgS. To tackle this problem, we used Ag catalyst in Mg/S cells with Cl- containing electrolyte, and achieved a greatly improved specific capacity of ~1200 mAh•g -1 and a long cycling life of 100 cycles. To understand the mechanism behind this improvement, we employed in-situ synchrotron radiation X-ray diffraction and in-situ X-ray absorption spectroscopy tools to study the reversible phase transitions during charge/discharge cycling. Additionally, the in-situ experiment results revealed that, at deeply charged state, Ag reacted with Cl- in the electrolyte to form the AgCl interfacial layer which prevented the physical contact of Ag with elemental S and avoided the formation of Ag 2 S; at early discharged state, AgCl transformed back to metallic Ag, which guaranteed its catalytic effectiveness for MgS decomposition. This reversible function switching mechanism of Ag catalyst is completely different from that in Mg/S cells using other catalysts or electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Unraveling the mysteries of the thin film composite reverse osmosis membrane

A recent article in Science by Culp, Kumar, Gomez, and colleagues introduces a new approach to characterizing reverse osmosis thin film composite membranes to provide critical insights into understanding how polymer membrane microstructure affects water permeability. Such approaches offer a degree of microstructure characterization that has up until now been unavailable to the membrane science community. Here, combined with modeling of water diffusion coefficient in the polymer membrane itself, this effort has begun to answer decades-old questions about how polyamide reverse osmosis membranes function.

McCutcheon, Jeffrey R.↗
DOE OSTI2026

Atomic-scale vacancy engineering unlocks basal-plane catalytic activity in metallic WSe 2 for reversible oxygen electrocatalysis

Two-dimensional metallic transition metal dichalcogenides offer high electrical conductivity and large surface areas for electrocatalysis, yet their inherent basal planes are catalytically inert. Here, we present an atomic-scale vacancy engineering strategy to activate the basal surfaces of metallic WSe 2 for reversible oxygen electrocatalysis. This approach, based on intentionally designed substitutional metal doping, promotes the spontaneous formation of selenium vacancies while preserving the metallic 1 T′ phase, thereby creating highly reactive and oxygen-affinitive sites. Density functional theory calculations reveal that these vacancy-mediated metal complexes dramatically lower the energy barriers for initial oxygen adsorption, enabling dissociative oxygen adsorption. Operando and ex-situ spectroscopic analyses confirm that vacancy-mediated metal complexes transform into dynamic Se/W-oxide intermediates under operating conditions. Se/W-oxides on the surface experimentally and theoretically prove electrocatalytic activity and reversibility. Applying this strategy in lithium–oxygen batteries, the basal-plane activated WSe 2 shows high discharge capacities (9868 mA h g −1 , corresponding to 3947 mA h g$^{-1}_{cathode}$), impressive cycle retention over 550 cycles at 1000 mA h g −1 , and outstanding rate–capability over a wide current–density range (100–3000 mA g −1 ) during 256 cycles.

2D materials↗
DOE OSTI2022

Photoinduced reversible phase transition in a phenothiazine-based metal-organic framework

Photoinduced phase transitions in metal-organic frameworks are provoked by structural changes of photoresponsive linkers within the framework under light irradiation. These transitions are rare but fundamentally important as they can bring about light-switchability on a variety of properties of the materials. In this work, phenothiazine as a photoresponsive unit with distinctive photochemical properties is incorporated into a Zn-based metal-organic framework, PCN-401. The structural characterization of PCN-401 revealed a reversible structural transition upon light irradiation. The mechanisms behind the photoinduced phase transition are studied systematically by spectrometric methods and structural stability characterization. Our mechanistic studies successfully showcased how the phenothiazine unit in the framework undergoes structural transformation under light irradiation and how the reversible phase transition leads to the property changes. The findings have emphasized the significance of phenothiazine in photoresponsive materials and can serve as inspiration for the design and understandings of next-generation photoresponsive metal-organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the reversible electrodeposition of aluminum in low-cost room-temperature molten salts

Aluminum is the most earth-abundant metal, trivalent, and inert in ambient air; it also has a density approximately five times that of lithium at room temperature, making it attractive for cost-effective, long-duration storage in batteries. Here, we investigate structural requirements and physicochemical and transport properties of ionic liquid (IL) electrolytes thought to enable high reversibility of Al battery anodes. We find that intentionally designed, low-cost IL analogs, including ammonium-based molten salts, offer comparable Al anode reversibility to state-of-the-art imidazolium-based IL melts. A critical ratio of solvated Al-ion species is required to balance the effects of Lewis acidity needed to continuously etch native Al 2 O 3 and form a stable solid electrolyte interphase on Al. Our findings open new opportunities for developing simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

Necrosulfonamide reverses pyroptosis-induced inhibition of proliferation and differentiation of osteoblasts through the NLRP3/caspase-1/GSDMD pathway

The acute inflammatory stimulation occurring after a bone fracture regulates the repair and healing of local bone injury; however, under certain conditions, pyroptosis may occur in osteoblasts, which affects osteoblast proliferation and differentiation, thereby affecting the growth, development and morphological changes of bone tissue. The aim of the present study was to examine the effect of the pyroptosis inhibitor necrosulfonamide (NSA) on the proliferation and differentiation of osteoblasts and elucidate the underlying mechanism. The results revealed that NSA reversed the effects of ATP/lipopolysaccharide (LPS) on cell viability and pyroptosis, and on the mRNA and protein expression of pyroptosis-related genes. It also suppressed the secretion of IL-6, TNF-α and IL-1β and reversed the effects of ATP/LPS on the activity of ALP and the mRNA expression of differentiation-related genes in osteoblasts. The fact that overexpression of caspase-1, gasdermin D (GSDMD) and NLRP3 abolished the effects of NSA on the viability and pyroptosis of osteoblasts, as well as the mRNA expression of differentiation-related genes and the activity of ALP in osteoblasts, indicated that NSA promoted the proliferation and differentiation of osteoblasts by inhibiting the NLRP3/caspase-1/GSDMD pyroptosis pathway. The present study provides proof supporting the potential application of NSA for improving the function of osteoblasts in fracture repair and indicates the value of the NLRP3/caspase-1/GSDMD pyroptosis pathway as a pharmaceutical target.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Reversal of Catalytic Material Substrate Selectivity through Partitioning of Polymers in Hierarchically Ordered Virus-like Particle Frameworks

Control over the selectivity of catalytic materials is a topic of growing interest. Virus-like particle (VLP) based materials such as protein macromolecular frameworks (PMFs) are promising for catalytic applications due to their ease of assembly, modular ability to encapsulate a variety of enzymes, and ease of separation from a reaction mixture. Here we demonstrate the reversal of the initially negative material charge through the titration of a positively charged polymer into the material, causing the reversal of guest molecule uptake and enzymatic activity of PMFs. The charge-inverse material partitions a charged enzyme substrate to concentrate the substrate near an enzyme incorporated within the material, generating up to 5.9-fold increases in enzyme activity toward the partitioned substrate over the excluded substrate. Here we also show that the polymer distributes heterogeneously through the material up to a point of saturation and the effects of guest macromolecules on the lattice parameters of PMFs.

36 MATERIALS SCIENCE↗