SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A mechanical pump for use with the Pioneer-Venus probe mass spectrometer inlet system was obtained, and a limited performance testing program, including ultimate/compression ratio tests and throughput tests at three different pump speeds, was performed. Considerable operating experience with the pump was obtained over approximately 200 hours of running. The test results show general agreement with pump specifications.
The axisymmetric perturbations of a thin, differentially rotating gas disk in which the vertical temperature stratification is superadiabatic are analyzed. The growth rate of adiabatic convective normal modes is calculated, departures from simple polytropic disk models are briefly discussed, and the detailed vertical structure of the eigenfunctions is analyzed. The stabilizing effect of radiative diffusion on convective modes is considered. It is found that rotation and compressibility tend to reduce the rate of growth of the disturbances, and that the growth rate increases without limit and is proportional to the square root of the radial wavenumber in polytropic equilibria. The maximum radial size of convective eddies scales like the square root of the degree of superadiabaticity times the size of the convective zone. There is significant convective penetration into radiatively stable layers only for the fundamental and low-order harmonic modes, whose vertical wavelength is comparable to the size of the convective layer.
Because resistance exercise (REx) and bed-rest unloading (BRU) are associated with opposing adaptations, our purpose was to test the efficacy of REx against the effects of 14 days of BRU on the knee-extensor muscle group. Sixteen healthy men were randomly assigned to no exercise (NoEx; n = 8) or REx (n = 8). REx performed five sets of leg press exercise with 80-85% of one repetition maximum (1 RM) every other day during BRU. Muscle samples were removed from the vastus lateralis muscle by percutaneous needle biopsy. Myofiber distribution was determined immunohistochemically with three monoclonal antibodies against myosin heavy chain (MHC) isoforms (I, IIa, IIx). MHC distribution was further assessed by quantitative gel electrophoresis. Dynamic 1-RM leg press and unilateral maximum voluntary isometric contraction (MVC) were determined. Maximal neural activation (root mean squared electromyogram) and rate of torque development (RTD) were measured during MVC. Reductions (P < 0.05) in type I (15%) and type II (17%) myofiber cross-sectional areas were found in NoEx but not in REx. Electrophoresis revealed no changes in MHC isoform distribution. The percentage of type IIx myofibers decreased (P < 0.05) in REx from 9 to 2% and did not change in NoEx. 1 RM was reduced (P < 0.05) by 9% in NoEx but was unchanged in REx. MVC fell by 15 and 13% in NoEx and REx, respectively. The agonist-to-antagonist root mean squared electromyogram ratio decreased (P < 0.05) 19% in REx. RTD slowed (P < 0.05) by 54% in NoEx only. Results indicate that REx prevented BRU-induced myofiber atrophy and also maintained training-specific strength. Unlike spaceflight, BRU did not induce shifts in myosin phenotype. The reported benefits of REx may prove useful in prescribing exercise for astronauts in microgravity.
Sweetpotato is one of several crops recommended by National Aeronautics and Space Administration (NASA) for bioregenerative life support studies. One of the objectives of the Tuskegee University NASA Center is to optimize growth conditions for adaptability of sweetpotatoes for closed bioregenerative systems. The role of nutrient solution management as it impacts yield has been one of the major thrusts in these studies. Nutrient solution management protocol currently used consists of a modified half Hoagland solution that is changed at 14-day intervals. Reservoirs are refilled with deionized water if the volume of the nutrient solution was reduced to 8 liters or less before the time of solution change. There is the need to recycle and replenish nutrient solution during crop growth, rather than discard at 14 day intervals as previously done, in order to reduce waste. Experiments were conducted in an environmental growth room to examine the effects of container size on the growth of several sweetpotato genotypes grown under a nutrient replenishment protocol. Plants were grown from vine cuttings of 15cm length and were planted in 0.15 x 0.15 x 1.2m growth channels using a closed nutrient film technique system. Nutrient was supplied in a modified half strength Hoagland's solution with a 1:2.4 N:K ratio. Nutrient replenishment protocol consisted of daily water replenishment to a constant volume of 30.4 liters in the small containers and 273.6 liters in the large container. Nutrients were replenished as needed when the EC of the nutrient solution fell below 1200 mhos/cm. The experimental design used was a split-plot with the main plot being container size and genotypes as the subplot. Nine sweetpotato genotypes were evaluated. Results showed no effect of nutrient solution container size on storage root yield, foliage fresh and dry mass, leaf area or vine length. However, plants grown using the large nutrient solution container accumulated more storage root dry mass than those with the small containers. Although plants grown with the smaller containers showed greater water uptake, plant nutrient uptake was lower than with the larger container. All genotypes evaluated showed variation in their responses to all parameters measured.
First phase development of an advanced modulation technology which synergistically combines coding and modulation to achieve 2 bits per second per Hertz bandwidth efficiency in satellite demodulators is nearing completion. A proof-of-concept model is being developed to demonstrate technology feasibility, establish practical bandwidth efficiency limitations, and provide a data base for the design and development of engineering model satellite demodulators. The basic considerations leading to the choice of 4 x 4 quadrature amplitude modulation (16-QAM) and its associated coding format are discussed, along with the basic implementation of the carrier and clock recovery, automatic gain control, and decoding process. Preliminary performance results are presented. Spectra for the modulated signal shows the effects of the square root Nyquist filters in the modulation. Bit error rate (BER) results for the encoder/decoder subsystem show near ideal results, although power consumption is high and baseband BER performance of the Nyquist filter set is poor. Recommendations regarding the present system to improve BER performance and acquisition speed are given.
The original configuration of the GSFC data acquisition, preprocessing, and transmission subsystem, designed to provide LANDSAT data inputs to the LACIE system at JSC, is described. Enhancements made to support LANDSAT -2, and modifications for LANDSAT -3 are discussed. Registration performance throughout the 3 year period of LACIE operations satisfied the 1 pixel root-mean-square requirements established in 1974, with more than two of every three attempts at data registration proving successful, notwithstanding cosmetic faults or content inadequacies to which the process is inherently susceptible. The cloud/snow rejection rate experienced throughout the last 3 years has approached 50%, as expected in most LANDSAT data use situations.
The improvement in measurement uncertainty brought about by the averaging of increasing numbers of pulse return signals in both heterodyne- and direct-detection lidar systems is investigated. A theoretical analysis is presented which shows the standard deviation of the mean measurement to decrease as the inverse square root of the number of measurements, except in the presence of temporal correlation. Experimental measurements based on a dual-hybrid-TEA CO2 laser differential absorption lidar system are reported which demonstrate that the actual reduction in the standard deviation of the mean in both heterodyne- and direct-detection systems is much slower than the inverse square-root dependence predicted for uncorrelated signals, but is in agreement with predictions in the event of temporal correlation. Results thus favor the use of direct detection at relatively short range where the lower limit of the standard deviation of the mean is about 2 percent, but advantages of heterodyne detection at longer ranges are noted.
This paper describes the overall Large Area Crop Inventory Experiment technical approach utilizing the global weather-reporting network and the Landsat satellite to make a quasi-operational application of existing research results, and the accomplishments of this cooperative experiment in utilizing the weather information. Global weather data were utilized in preparing timely yield estimates for selected areas of the U.S. Great Plains, the U.S.S.R. and Canada. Additionally, wheat yield models were developed and pilot tested for Brazil, Australia, India and Argentina. The results of the work show that heading dates for wheat in North America can be predicted with an average absolute error of about 5 days for winter wheat and 4 days for spring wheat. Independent tests of wheat yield models over a 10-year period for the U.S. Great Plains produced a root-mean-square error of 1.12 quintals per hectare (q/ha) while similar tests in the U.S.S.R. produced an error of 1.31 q/ha. Research designed to improve the initial capability is described as is the rationale for further evolution of a capability to monitor global climate and assess its impact on world food supplies.
The geometric quality of TM film and digital products is evaluated by making selective photomeasurements and by measuring the coordinates of known features on both the TM products and map products. These paired observations are related using a standard linear least squares regression approach. Using regression equations and coefficients developed from 225 (TM film product) and 20 (TM digital product) control points, map coordinates of test points are predicted. The residual error vectors and analysis of variance (ANOVA) were performed on the east and north residual using nine image segments (blocks) as treatments. Based on the root mean square error of the 223 (TM film product) and 22 (TM digital product) test points, users of TM data expect the planimetric accuracy of mapped points to be within 91 meters and within 117 meters for the film products, and to be within 12 meters and within 14 meters for the digital products.
The implications are considered of the observed inverse correlation between solar wind speed at earth and the expansion rate of the sun-earth flux tube as it passes through the corona. It is found that the coronal expansion rate depends critically on the large-scale photospheric field distribution around the footpoint of the flux tube. The smallest expansions occur in tubes that are rooted near a local minimum in the field. This suggests that the fastest wind streams originate from regions where large coronal holes are about to break apart and from the facing edges of adjacent like-polarity holes, whose field lines converge as they transit the corona. Predictions are made which follow from the above ideas.
Results are presented for the minimum weight design of SR2 unswept blade made of (titanium/graphite-epoxy/titanium) sub s fiber composite. The blade which is rotating at high RPM is subject to ice impact. The root chord length, blade thicknesses at five stations, and graphite-epoxy ply orientation are chosen as design variables. Design constraints are placed on the behavior variables: local leading edge strain and root damage parameter (combined stress failure criteria) as a function due to ice impact, maximum spanwise centrifugal stress at the root of the deformed blade due to local damage, first three natural frequencies, and resonance margin after impact. The method of feasible directions is employed to solve the inequality constrained minimization problem. The effect of ice speed and the ice impact location on the final design are discussed.
The Phase 3 Lunar-Mars Life Support Test Project (LMLSTP) was conducted in a 20-foot chamber at Johnson Space Center. The overall objective of the Phase 3 project was to conduct a 90-day regenerative life support system test involving 4 human subjects to demonstrate an integrated biological and physicochemical life support system. A secondary objective of the Phase 3 LMLSTP was to demonstrate the ability to produce salad-type vegetable by integration of a small benchtop growth chamber located within the crew habitat area. This small chamber, commercially manufactured as the Controlled Environment Research Ecosystem (CERES 2010(TM)), functioned as a means to continuously provide fresh lettuce crops for crew members. The CERES 2010(TM) growth chamber utilized hardware components developed for effective plant biomass production in spaceflight applications. These components included: (1) LED lighting; (2) Astroculture(TM) Root Trays; and (3) Zeoponic media. In planning for the LMLSTP Phase 3, a request was put forward for KSC scientists to generate a protocol for successful continuous planting, culturing, and harvesting of the salad-crop, lettuce. By conducting baseline tests with components of the CERES 2010(TM), a protocol was developed.
The control of water content and water movement in granular substrate-based plant root systems in microgravity is a complex problem. Improper water and oxygen delivery to plant roots has delayed studies of the effects of microgravity on plant development and the use of plants in physical and mental life support systems. Our international effort (USA, Russia and Bulgaria) has upgraded the plant growth facilities on the Mir Orbital Station (OS) and used them to study the full life cycle of plants. The Bulgarian-Russian-developed Svet Space Greenhouse (SG) system was upgraded on the Mir OS in 1996. The US developed Gas Exchange Measurement System (GEMS) greatly extends the range of environmental parameters monitored. The Svet-GEMS complex was used to grow a fully developed wheat crop during 1996. The growth rate and development of these plants compared well with earth grown plants indicating that the root zone water and oxygen stresses that have limited plant development in previous long-duration experiments have been overcome. However, management of the root environment during this experiment involved several significant changes in control settings as the relationship between the water delivery system, water status sensors, and the substrate changed during the growth cycles. c 2001 Published by Elsevier Science Ltd. All rights reserved.
A study was conducted to determine the processes which govern dwell notch low cycle fatigue (NLCF) behavior of a powder metallurgy (P/M) ME3 disk superalloy. The emphasis was placed on the environmentally driven mechanisms which may embrittle the highly stressed notch surface regions and reduce NLCF life. In conjunction with the environmentally driven notch surface degradation processes, the visco-plastic driven mechanisms which can significantly change the notch root stresses were also considered. Dwell notch low cycle fatigue testing was performed in air and vacuum on a ME3 P/M disk alloy specimens heat treated using either a fast or a slow cooling rate from the solutioning treatment. It was shown that dwells at the minimum stress typically produced a greater life debit than the dwells applied at the maximum stress, especially for the slow cooled heat treatment. Two different environmentally driven failure mechanisms were identified as the root cause of early crack initiation in the min dwell tests. Both of these failure mechanisms produced mostly a transgranular crack initiation failure mode and yet still resulted in low NLCF fatigue lives. The lack of stress relaxation during the min dwell tests produced higher notch root stresses which caused early crack initiation and premature failure when combined with the environmentally driven surface degradation mechanisms. The importance of environmental degradation mechanisms was further highlighted by vacuum dwell NLCF tests which resulted in considerably longer NLCF lives, especially for the min dwell tests.
A video image processing instrument, DARWIN (Digital Analyser of Resolvable Whole-pictures by Image Numeration), was developed. It was programmed to measure stem or root growth and bending, and coupled to a specially mounted video camera to be able to automatically generate growth and bending curves during gravitropism. The growth of the plant is recorded on a video casette recorder with a specially modified time lapse function. At the end of the experiment, DARWIN analyses the growth or movement and prints out bending and growth curves. This system was used to measure thigmomorphagenesis in light grown corn plants. If the plant is rubbed with an applied force load of 0.38 N., it grows faster than the unrubbed control, whereas 1.14 N. retards its growth. Image analysis shows that most of the change in the rate of growth is caused in the first hour after rubbing. When DARWIN was used to measure gravitropism in dark grown oat seedlings, it was found that the top side of the shoot contracts during the first hour of gravitational stimulus, whereas the bottom side begins to elongate after 10 to 15 minutes.
In this paper, a derivation is provided of the necessary condition, mp equal to or greater than n, for stabilizability by constant gain feedback of the generic degree n, p x m system. This follows from another of the main results, which asserts that generic stabilizability is equivalent to generic solvability of a deadbeat control problem, provided mp equal to or less than n. Taken together, these conclusions make it possible to make some sharp statements concerning minimum order stabilization. The techniques are primarily drawn from decision algebra and classical algebraic geometry and have additional consequences for problems of stabilizability and pole-assignability. Among these are the decidability (by a Sturm test) of the equivalence of generic pole-assignability and generic stabilizability, the semi-algebraic nature of the minimum order, q, of a stabilizing compensator, and the nonexistence of formulae involving rational operations and extraction of square roots for pole-assigning gains when they exist, answering in the negative a question raised by Anderson, Bose, and Jury (1975).
The Global Reference Atmospheric Model (GRAM) program includes the capability for simulating pseudo-random perturbations in density, temperature, pressure, or wind components along a simulated reentry trajectory or other path through the atmosphere. Some concerns were expressed by GRAM users, however, that the mean-square perturbation gradients may be too large for small values of the vertical separation Delta z. The present GRAM perturbation simulations, based on a one-step autoregressive model, yield a power spectrum versus wavenumber k which is proportional to k sup -2 at high wavenumbers. This feature also produces mean-square perturbation differences which are directly proportional to Delta z, and mean-square perturbation gradients which are inversely proportional to Delta z. Thus, root-mean-square gradients, (Delta f/Delta z) sub rms, increase with decreasing Delta a as Delta z sup -1/2. A simple modification to GRAM is suggested which overcomes this problem, i.e., which produce root-mean-square gradient that remain bound as Delta z approaches zero. Possible applications of more sophisticated simulation approaches, e.g., second order autoregressive models, or fractal model techniques, were also explored briefly but found to yield improvements which appear too small to justify their considerable added complexity for use in the GRAM programs.
Transonic strong blade-vortex interaction is numerically analyzed by solving the unsteady two-dimensional Navier-Stokes equations using an iterative implicit second order scheme. The dominant processes during the interaction are the development of large transverse pressure gradients in the upper leading edge region and the development of disturbances at the root of the lower surface shock wave. As a result of this interaction, high pressure pulses are emitted from the leading edge, and acoustic waves are radiated from the lower surface in a region originally occupied by a supersonic pocket. In addition, severe load variations occur when the vortex is within one chord length of the blade.