Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEEBECK EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Thermoelectric properties of fully hydrogenated graphene: Semi-classical Boltzmann theory

Based on the calculated band structure, the electronic transport coefficients of chair-/boat-like graphane were evaluated by using the semi-classical Boltzmann theory and rigid band model. The maximum value of electrical conductivity for chair (boat)-like graphane of about 1.4 (0.6) × 10{sup 19} (Ωms){sup −1} is achieved at 600 K. The charge carrier concentration and the electrical conductivity linearly increase with increasing the temperature in agreement with the experimental work for graphene. The investigated materials exhibit the highest value of Seebeck coefficient at 300 K. We should emphasize that in the chemical potential between ∓0.125 μ(eV) the investigated materials exhibit minimum value of electronic thermal conductivity, therefore, maximum efficiency. As the temperature increases, the electronic thermal conductivity increases exponentially, in agreement with the experimental data of graphene. We also calculated the power factor of chair-/boat-like graphane at 300 and 600 K as a function of chemical potential between ∓0.25 μ(eV)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical/thermal transport and electronic structure of the binary cobalt pnictides CoPn{sub 2} (Pn = As and Sb)

We demonstrate the electrical and thermal transport properties of polycrystalline CoPn{sub 2} (Pn = As and Sb) between 300 and 900 K. CoAs{sub 2} shows semiconducting electrical transport up to 900 K, while CoSb{sub 2} exhibits degenerate conduction. Sign inversion of the Seebeck coefficient is observed at ∼310 and ∼400 K for CoAs{sub 2} and CoSb{sub 2}, respectively. Thermal conductivity at 300 K is 11.7 Wm{sup −1}K{sup −1} for CoAs{sub 2} and 9.4 Wm{sup −1}K{sup −1} for CoSb{sub 2}. The thermoelectric power factor of CoAs{sub 2} is ∼10 μWcm{sup −1}K{sup −2}, although the dimensionless figure of merit is limited to ∼0.1 due to relatively high thermal conductivity. Using electronic structure calculations, the band gap value is calculated to be 0.55 eV for CoAs{sub 2} and 0.26 eV for CoSb{sub 2}.

36 MATERIALS SCIENCE↗

Thermoelectric properties of Al doped Mg{sub 2}Si material

In the present paper we have calculated thermoelectric properties of Al doped Mg{sub 2}Si material (Mg{sub 2−x}Al{sub x}Si, x=0.06) using Pseudo potential plane wave method based on DFT and Semi classical Boltzmann theory. The calculations showed n-type conduction, indicating that the electrical conduction are due to electron. The electrical conductivity increasing with increasing temperature and the negative value of Seebeck Coefficient also show that the conduction is due to electron. The thermal conductivity was increased slightly by Al doping with increasing temperature due to the much larger contribution of lattice thermal conductivity over electronic thermal conductivity.

36 MATERIALS SCIENCE↗

The electronic structure and thermoelectric properties of BiTl{sub 9}Te{sub 6} and SbTl{sub 9}Te{sub 6}: First-principles calculations

The electronic structure and thermoelectric properties of MTl{sub 9}Te{sub 6} (M = Bi, Sb) were studied using density functional theory and the semiclassical Boltzmann theory. It is found that the band gaps of BiTl{sub 9}Te{sub 6} and SbTl{sub 9}Te{sub 6} are equal to 0.59 eV and 0.72 eV, respectively. The relative large band gap and strong coupling between Sb s and Te p are helpful to the thermoelectric properties of SbTl{sub 9}Te{sub 6}. Near the bottom of the conduction bands, the number of band valleys of SbTl{sub 9}Te{sub 6} is four and is larger than that of BiTl{sub 9}Te{sub 6} (two band valleys), which will increase its Seebeck coefficient. Although BiTl{sub 9}Te{sub 6} has a larger electrical conductivity relative to relaxation time (σ/τ) along the z-direction than that of SbTl{sub 9}Te{sub 6}, the results show that the transport properties of SbTl{sub 9}Te{sub 6} are better than those of BiTl{sub 9}Te{sub 6} possibly due to its large Seebeck coefficient. The maximum value of power factor relative to relaxation time (S{sup 2}σ/τ) for SbTl{sub 9}Te{sub 6} reaches 4.30 × 10{sup 11 }W/K{sup 2} m s at 900 K, that is, originated from its relatively large Seebeck coefficient, suggesting its promising thermoelectric performance at high temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

The structural properties of InGaN alloys and the interdependence on the thermoelectric behavior

The III-Nitrides are promising candidate for high efficiency thermoelectric (TE) materials and devices due to their unique features which includes high thermal stability. A systematic study of the room temperature TE properties of metalorganic chemical vapor deposition grown In{sub x}Ga{sub 1-x}N were investigated for x = 0.07 to 0.24. This paper investigated the role of indium composition on the TE properties of InGaN alloys in particular the structural properties for homogenous material that did not show significant phase separation. The highest Seebeck and power factor values of 507 μV K{sup −1} and 21.84 × 10{sup −4} Wm{sup −1}K{sup −1} were observed, respectively for In{sub 0.07}Ga{sub 0.93}N at room temperature. The highest value of figure-of-merit (ZT) was calculated to be 0.072 for In{sub 0.20}Ga{sub 0.80}N alloy at room temperature.

36 MATERIALS SCIENCE↗

Thermoelectric properties of doped BaHfO{sub 3}

We have studied the structural stability, electronic structure, optical properties and thermoelectric properties of doped BaHfO{sub 3} by full potential linearized augmented plane wave (FP-LAPW) method. The electronic structure of BaHfO{sub 3} doped with Sr shows enhances the indirect band gaps of 3.53 eV, 3.58 eV. The charge density plots show strong ionic bonding in Ba-Hf, and ionic and covalent bonding between Hf and O. Calculations of the optical spectra, viz., the dielectric function, refractive index and extinction coefficient are performed for the energy range are calculated and analyzed. Thermoelectric properties of semi conducting are also reported first time. The doped BaHfO{sub 3} is approximately wide band gap semiconductor with the large p-type Seebeck coefficient. The power factor of BaHfO{sub 3} is increased with Sr doping, decreases because of low electrical resistivity and thermal conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and thermoelectric transport properties of the golden Th{sub 2}S{sub 3}-type Ti{sub 2}O{sub 3} under pressure

A lot of physical properties of Th{sub 2}S{sub 3}-type Ti{sub 2}O{sub 3} have investigated experimentally, hence, we calculated electronic structure and thermoelectric transport properties by the first-principles calculation under pressure. The increase of the band gaps is very fast from 30 GPa to 35 GPa, which is mainly because of the rapid change of the lattice constants. The total density of states becomes smaller with increasing pressure, which shows that Seebeck coefficient gradually decreases. Two main peaks of Seebeck coefficients always decrease and shift to the high doping area with increasing temperature under pressure. The electrical conductivities always decrease with increasing temperature under pressure. The electrical conductivity can be improved by increasing pressure. Electronic thermal conductivity increases with increasing pressure. It is noted that the thermoelectric properties is reduced with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin injection by spin–charge coupling in proximity induced magnetic graphene

Abstract Within the field of spintronics major efforts are directed towards developing applications for spin-based transport devices made fully out of two-dimensional materials. In this work we present an experimental realization of a spin-valve device where the generation of the spin signal is exclusively attributed to the spin-dependent conductivity of the magnetic graphene resulting from the proximity of an interlayer antiferromagnet, chromium sulfide bromide (CrSBr). We clearly demonstrate that the usage of the conventional air-sensitive 3D magnetic contacts can be fully avoided when graphene/CrSBr heterostructures are employed. Moreover, apart from providing exceptionally long spin relaxation length, the usage of graphene for both generation and transport of the spin allows to automatically avoid the conductivity mismatch between the source and the channel circuits that has to be considered when using conventional low-resistive contacts. Our results address a necessary step in the engineering of spintronic circuitry out of layered materials and precede further developments in the area of complex spin-logic devices. Moreover, we introduce a fabrication procedure where we designed and implemented a recipe for the preparation of electrodes via a damage-free technique that offers an immediate advantage in the fields of air-sensitive and delicate organic materials.

36 MATERIALS SCIENCE↗

Magnetic Phase Transitions in NdCoAsO

NdCoAsO undergoes three magnetic phase transitions below room temperature. Here we report the results of our experimental investigation of this compound, including determination of the crystal and magnetic structures using powder neutron diffraction, as well as measurements of electrical resistivity, thermal conductivity, Seebeck coefficient, magnetization, and heat capacity. These results show that upon cooling a ferromagnetic state emerges near 69 K with a small saturation moment of -0.2{micro}{sub B}, likely on Co atoms. At 14 K the material enters an antiferromagnetic state with propagation vector (0 0 1/2) and small ordered moments (-0.4{micro}{sub B}) on Co and Nd. Near 3.5 K a third transition is observed, and corresponds to the antiferromagnetic ordering of larger moments on Nd, with the same propagation vector. The ordered moment on Nd reaches 1.39(5){micro}{sub B} at 300 mK. Anomalies in the magnetization, electrical resistivity, and heat capacity are observed at all three magnetic phase transitions.

36 MATERIALS SCIENCE↗

Breakdown of the Wiedemann-Franz law in A B -stacked bilayer graphene

We present a simple theory of thermoelectric transport in bilayer graphene and report our results for the electrical resistivity, the thermal resistivity, the Seebeck coefficient, and the Wiedemann-Franz ratio as functions of doping density and temperature. In the absence of disorder, the thermal resistivity tends to zero as the charge neutrality point is approached; the electric resistivity jumps from zero to an intrinsic finite value, and the Seebeck coefficient diverges in the same limit. Even though these results are similar to those obtained for single-layer graphene, their derivation is considerably more delicate. Here, the singularities are removed by the inclusion of a small amount of disorder, which leads to the appearance of a “window” of doping densities 0 < n < n c (with n c tending to zero in the zero-disorder limit) in which the Wiedemann-Franz law is severely violated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iridium valence variation and carrier sign tuning in ( Ca , Ba ) x La 2 – x CuIrO 6 double perovskites

Here, we report the structure and properties of ( Ca , Ba ) x La 2 – x CuIrO 6 . The rock-salt double perovskite structure goes through a P 1 ¯ to P 2 1 / n phase transition with increasing Ba content but not with Ca content. In both cases, the Ir ion is oxidized from 4 + to 5 + with increasing substitution. Transport and magnetic properties measurements reveal that all compositions are insulating with hysteretic spin-freezing magnetic behavior. Seebeck coefficient measurements reveal a large thermopower change from + 176 μ V /K in La 2 CuIrO 6 to – 223 μ V /K with increasing Ba content in Ba x La 2 – x CuIrO 6 . This behavior is modeled well by the Heikes formula for correlated hopping conduction. ( Ca , Ba ) x La 2 – x CuIrO 6 provides a model system for investigations of other systems with similar carrier sign tuning, with applications toward semiconductors and thermoelectric materials.

36 MATERIALS SCIENCE↗

Properties of thin N-type Yb{sub 0.14}Co{sub 4}Sb{sub 12} and P-type Ce{sub 0.09}Fe{sub 0.67}Co{sub 3.33}Sb{sub 12} skutterudite layers prepared by laser ablation

The properties of thin thermoelectric layers (about 60 nm in thickness) prepared by pulsed laser deposition are presented. Hot pressed targets were made from ''middle'' temperature range thermoelectric bulk materials with the potential high figure of merit ZT. P-type and N-type layers were prepared from Yb{sub 0.19}Co{sub 4}Sb{sub 12} and Ce{sub 0.1}Fe{sub 0.7}Co{sub 3.3}Sb{sub 12} targets, respectively. The thin films were deposited on quartz glass substrates using KrF excimer laser. The individual layers were prepared by applying different laser beam energy densities (2 or 3 J cm{sup -2}) at several substrate temperatures (200, 250, or 300 deg. C). Crystallinity and composition of the layers were examined by x-ray diffraction and wavelength dispersive analysis, respectively. Homogeneity of Yb across a surface of the Yb filled film was explored by secondary ion mass spectrometry. The thermoelectric properties, the Seebeck coefficient, the electrical resistivity, and the power factor, for the best prepared P and N layer are presented in the temperature range from 300 to 500 K.

36 MATERIALS SCIENCE↗

Atomic layer deposition of Al-doped ZnO thin films

Atomic layer deposition has been used to fabricate thin films of aluminum-doped ZnO by depositing interspersed layers of ZnO and Al{sub 2}O{sub 3} on borosilicate glass substrates. The growth characteristics of the films have been investigated through x-ray diffraction, x-ray reflection, and x-ray fluorescence measurements, and the efficacy of the Al doping has been evaluated through optical reflectivity and Seebeck coefficient measurements. The Al doping is found to affect the carrier density of ZnO up to a nominal Al dopant content of 5 at. %. At nominal Al doping levels of 10 at. % and higher, the structure of the films is found to be strongly affected by the Al{sub 2}O{sub 3} phase and no further carrier doping of ZnO is observed.

36 MATERIALS SCIENCE↗

Thermoelectric Power of a Luttinger Liquid

The thermoelectric power of a Luttinger liquid with a potential barrier is calculated. The long-range nature of electron–electron interaction is taken into account. It is shown that the increased interaction range changes the temperature dependence of the thermoelectric power qualitatively. At low temperatures, the Seebeck coefficient of a Luttinger liquid is considerably smaller than that of a one-dimensional Fermi gas. As the temperature increases, the thermoelectric power increases rapidly and can exceed that of a Fermi gas. The results obtained are in qualitative agreement with experimental data for quasi-one-dimensional 5-nm-thick InSb wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological Surface States of Dirac Fermions in n-Bi 2 Te 3-y Se y Thermoelectrics

In n-Bi{sub 2}Te{sub 3} and n-Bi 2 Te 3-y Se y thermoelectrics, the surface states of Dirac fermions of the interlayer Van der Waals surface (0001) are studied by scanning tunneling microscopy and spectroscopy. The surface morphology and modulated line profiles of the tunneling microscopy images are determined by local distortions of the surface density of electronic states and depend on the composition. The Dirac point E D in the studied compositions is localized in the band gap and shifts to the top of the valence band with increasing Se content in n-Bi 2 Te 3-y Se y alloys. The dependence between the parameters of the surface states of Dirac fermions (Dirac-point position, Fermi velocity, surface fermion concentration) and thermoelectric properties (Seebeck coefficient and power parameter) in the thermoelectrics under study is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Modeling of the Thermoelectric Properties of Fe{sub 2}Ti{sub 1 –x}V{sub x}Sn Heusler Alloys

Theoretical calculations of the electron structure and Seebeck coefficient in Fe{sub 2}Ti{sub 1 –x}V{sub x}Sn alloys for the cases of a fully ordered L2{sub 1} and partially disordered B2 Heusler crystal structure are presented. It is shown that the band-gap width increases with the substitution of Ti by V. Comparison with the available theoretical and experimental data indicates that taking into account randomness in the atomic distribution makes it possible to acquire values of the Seebeck coefficient closer to the experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytic Couple Modeling Introducing Device Design Factor, Fin Factor, Thermal Diffusivity Factor, and Inductance Factor

A set of convenient thermoelectric device solutions have been derived in order to capture a number of factors which are previously only resolved with numerical techniques. The concise conversion efficiency equations derived from governing equations provide intuitive and straight-forward design guidelines. These guidelines allow for better device design without requiring detailed numerical modeling. The analytical modeling accounts for factors such as i) variable temperature boundary conditions, ii) lateral heat transfer, iii) temperature variable material properties, and iv) transient operation. New dimensionless parameters, similar to the figure of merit, are introduced including the device design factor, fin factor, thermal diffusivity factor, and inductance factor. These new device factors allow for the straight-forward description of phenomenon generally only captured with numerical work otherwise. As an example a device design factor of 0.38, which accounts for thermal resistance of the hot and cold shoes, can be used to calculate a conversion efficiency of 2.28 while the ideal conversion efficiency based on figure of merit alone would be 6.15. Likewise an ideal couple with efficiency of 6.15 will be reduced to 5.33 when lateral heat is accounted for with a fin factor of 1.0.

Seebeck effect↗

Thermoelectric properties of Co(x)Ni(4-x)Sb(12-y)Sn(y) ternary skutterudites

Thermoelectric materials based on the skutterudite crystal structure have demonstrated enhanced performance (ZT greater than 1), along with good thermal stability and favorable mechanical properties. Binary skutterudites, with single and multiple fillers, have been intensively studied in recent years. Compared to binary skutterudites, the ternary systems have received less attention, e.g. Ni4Sb8Sn4. Ternary skutterudites are isoelectronic variants of binary skutterudites; cation substitutions appear to be isostructural to their binary analogues. In general, ternary skutterudites exhibit lower thermal conductivity. Ternary systems of Ni4Bi8Ge4, Ni4Sb8Ge4, and Ni4Sb8Sn4 were investigated using combined solidification and sintering steps. Skutterudite formation was not achieved in the Ni4Bi8Ge4 and Ni4Sb8Ge4 systems; skutterudite formation occurred in Ni4Sb8Sn4 system. P-type material was achieved by Co substitution for Ni. Thermoelectric properties were measured from 298 K to 673 K for Ni4Sb8Sn4, Ni4 Sb7Sn5 and Co2Ni2Sb7Sn5. N-type Ni4Sb8Sn4 exhibit the highest figure of merit of 0.1 at 523 K.

Seebeck Effect↗