Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLAR SPECTRUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

The calculation of theoretical chromospheric models and the interpretation of solar spectra from rockets and spacecraft

Models and spectra of sunspots were studied, because they are important to energy balance and variability discussions. Sunspot observations in the ultraviolet region 140 to 168 nn was obtained by the NRL High Resolution Telescope and Spectrograph. Extensive photometric observations of sunspot umbrae and prenumbrae in 10 chanels covering the wavelength region 387 to 3800 nm were made. Cool star opacities and model atmospheres were computed. The Sun is the first testcase, both to check the opacity calculations against the observed solar spectrum, and to check the purely theoretical model calculation against the observed solar energy distribution. Line lists were finally completed for all the molecules that are important in computing statistical opacities for energy balance and for radiative rate calculations in the Sun (except perhaps for sunspots). Because many of these bands are incompletely analyzed in the laboratory, the energy levels are not well enough known to predict wavelengths accurately for spectrum synthesis and for detailed comparison with the observations.

Avrett, E. H.↗

Spectrophotovoltaic orbital power generation

The feasibilty of a spectrophotovoltaic orbital power generation system that optically concentrates solar energy is demonstrated. A dichroic beam-splitting mirror is used to divide the solar spectrum into two wavebands. Absorption of these wavebands by GaAs and Si solar cell arrays with matched energy bandgaps increases the cell efficiency while decreasing the amount of heat that must be rejected. The projected cost per peak watt if this system is $2.50/W sub p.

Onffroy, J. R.↗

Comet P/Halley 1910, 1986: An objective-prism study

V. M. Slipher of the Lowell Obs. collected a large amount of spectroscopic data during the 1910 apparition of Halley's comet. Three of his post perihelion objective-prism plates were selected, digitized, and subjected to modern digital data reduction procedures. Some of the important steps in the analysis where: (1) Density to intensity conversion for which was used 1910 slit spectra of Fe-arc lamp on similar plates (Sigma) and derived an average characteristic curve; (2) Flux calibration using the fact that during the period June 2 to 7 1910 P/Halley was very close (angular distance) to the bright star Alpha Sex (A0III, V-4.49), and the spectra of both star and comet were recorded on the same plates. The flux distribution of Alpha Sex was assumed to be similar to that of the standard star 58 Aql and derived a sensitivity curve for the system; (3) Atmospheric extinction using the standard curve for the Lowell Obs.; (4) Solar continuum subtraction using the standard solar spectrum binned to the spectral resolution. An example of a flux-calibrated spectrum of the coma (integrated over 87,000km) before the subtraction of solar continuum is presented.

Carsenty, U.↗

Enhancements in Photon Pressure Measurements Using a Solar Simulator

Initial proof of concept photon momentum measurements were reported at the AIAA Conference in Reno Nevada, January 8-11, 2001. That presentation verified that photon pressure on a simulated solar sail material can be measured under high vacuum conditions using a full spectrum solar simulator and a vacuum compatible force measurement system. Modifications to this test system were implemented to enhance the accuracy of the photon pressure measurement. This paper describes the photon pressure measurement technique and modifications to increase the measurement accuracy using a candidate sail material, aluminized Mylar.

Gray, P. A.↗

Study of the possibility of using solar radiant energy for welding and brazing metals

The solar spectrum at the surface of the earth is analyzed. A facility for creating concentrated solar radiant energy flux is described, and data on its energetic capabilities are presented. The technology of solar welding by the fusion technique and joining by high-temperature brazing is examined. The use of concentrated solar radiant energy for welding and brazing metals and alloys is shown. The results of mechanical tests and microscopic and macroscopic studies are presented.

Dvernyakov, V. S.↗

Solar physics

Solar physics involving electromagnetic radiation and solar spectrum at all wavelengths

SOLAR PHYSICS↗

Results of the 1995 JPL balloon flight solar cell calibration program

The Jet Propulsion Laboratory (JPL) solar cell calibration program was conceived to produce reference standards for the purpose of accurately setting solar simulator intensities. The concept was to fly solar cells on a high-altitude balloon, to measure their output at altitudes near 120,000 ft (36.6 km), to recover the cells, and to use them as reference standards. The procedure is simple. The reference cell is placed in the simulator beam, and the beam intensity is adjusted until the reference cell reads the same as it read on the balloon. As long as the reference cell has the same spectral response as the cells or panels to be measured, this is a very accurate method of setting the intensity. But as solar cell technology changes, the spectral response of the solar cells changes also, and reference standards using the new technology must be built and calibrated. Until the summer of 1985, there had always been a question as to how much the atmosphere above the balloon modified the solar spectrum. If the modification was significant, the reference cells might not have the required accuracy. Solar cells made in recent years have increasingly higher blue responses, and if the atmosphere has any effect at all, it would be expected to modify the calibration of these newer blue cells much more so than for cells made in the past. JPL has been flying calibration standards on high-altitude balloons since 1963 and continues to organize a calibration balloon flight at least once a year. The 1995 flight was the 48th flight in this series. The 1995 flight incorporated 46 solar cell modules from 7 different participants. The payload included Si, amorphous Si, GaAs, GaAs/Ge, dual junction cells, top and bottom sections of dual junction cells, and a triple junction cell. A new data acquisition system was built for the balloon flights and flown for the first time on the 1995 flight. This system allows the measurement of current-voltage (I-V) curves for 20 modules in addition to measurement of modules with fixed loads as had been done in the past.

Anspaugh, B. E.↗

Solar Rotational Modulations of Spectral Irradiance and Correlations with the Variability of Total Solar Irradiance

Aims: We characterize the solar rotational modulations of spectral solar irradiance (SSI) and compare them with the corresponding changes of total solar irradiance (TSI). Solar rotational modulations of TSI and SSI at wavelengths between 120 and 1600 nm are identified over one hundred Carrington rotational cycles during 2003-2013. Methods: The SORCE (Solar Radiation and Climate Experiment) and TIMED (Thermosphere Ionosphere Mesosphere Energetics and Dynamics)/SEE (Solar EUV Experiment) measured and SATIRE-S modeled solar irradiances are analyzed using the EEMD (Ensemble Empirical Mode Decomposition) method to determine the phase and amplitude of 27-day solar rotational variation in TSI and SSI. Results: The mode decomposition clearly identifies 27-day solar rotational variations in SSI between 120 and 1600 nm, and there is a robust wavelength dependence in the phase of the rotational mode relative to that of TSI. The rotational modes of visible (VIS) and near infrared (NIR) are in phase with the mode of TSI, but the phase of the rotational mode of ultraviolet (UV) exhibits differences from that of TSI. While it is questionable that the VIS to NIR portion of the solar spectrum has yet been observed with sufficient accuracy and precision to determine the 11-year solar cycle variations, the temporal variations over one hundred cycles of 27-day solar rotation, independent of the two solar cycles in which they are embedded, show distinct solar rotational modulations at each wavelength.

Spectral Solar Irradiance↗

Evaluation of AlsubxGasub1-xsubAs solar cells

Single junction GaAs solar cells have already attained an efficiency of 19% AMO which could potentially be increased to approx 20%, with some optimization. To achieve the higher efficiency the concept of multibandgap solar cells which utilizes a wider region of the solar spectrum should be sed. One of the materials for fabricating the top cell in a multibandgap solar cell is AlGaAs because it is compatible with GaAs in bandgap and lattice match. This is a very important consideration from the materials technology point of view, and the viability of this approach is evaluated.

Loo, R. Y.↗

The O II /7320-7330 A/ airglow - A morphological study

A statistical study of the 7320-30 A airglow arising from the metastable transition between aP and aD states of atomic oxygen ions was conducted by analyzing the data taken from the visible airglow experiment on the Atmosphere Explorer satellites C and E during the time periods between 1974 and 1979. Averaged column emission rate profiles as a function of solar zenith angle and solar activity variation are presented. The galactic background has been carefully subtracted. The result shows that the rate of decreasing emission as a function of solar zenith angle agrees with the theoretical calculation based upon a neutral atmosphere model and the solar spectrum as measured by the EUV spectrometer on the Atmosphere Explorer satellite. Furthermore, an expected increase with solar activity also appeared in a plot of emission brightness versus solar 10.7-cm flux.

Yee, J. H.↗

Effects of low Earth orbit environment on the Long Duration Exposure Facility thermal control coatings

One of the benefits of the Long Duration Exposure Facility (LDEF) was the opportunity to study the before and after effects of low earth orbit space environment on the spacecraft thermal control coatings. Since the LDEF's thermal control was totally passive by design, the selection of the external surface absorptivity to emissivity ratio (alpha/epsilon) and the ability for the coating to retain the alpha/epsilon over time was an important consideration in the thermal design of the LDEF. The primary surface coating chosen for the LDEF structure was clear chromic anodized aluminum with an average design alpha/epsilon of 0.32/0.16. External surface absorptivity (alpha) and emissivity (epsilon) were measured on all intercostals, longerons, tray mounting flanges, thermal control panels, and a limited number of experiment surface coatings after the experiment trays were removed from the LDEF structure. All surface alpha/epsilon measurements were made using portable hand held infrared and solar spectrum reflectometers. The absorptivity measurements were taken with a Devices and Services SSR-ER version 5.0 solar spectra reflectometer which has a stated uncertainty of +/- 0.01, and all normal emissivity measurements were made using the Gier Dunkle DB-100 infrared reflectometer also with a stated uncertainty of +/- 0.01. Both instruments were calibrated in the laboratory by LaRC instrumentation personnel before being used in the field at KSC. A combined total of 733 measurements were taken on the anodized aluminum hardware which included the structure (intercostals, longerons, and center ring), earth and space end thermal control panels, and experiment tray mounting flanges. The facility thermal control coatings measured in this survey cover 33 percent of the total exposed LDEF surface area. To correlate low earth orbit environmental effects on the anodized coatings, measurements were taken in both exposed and unexposed surfaces and compared to quality assurance (QA) measurements taken on the new surfaces at the time of hardware fabrication in 1978. The results of investigation are presented.

Sampair, Thomas R.↗

Long-Term Solar Irradiance Variability

Measurements of the solar energy throughout the solar spectrum and understanding its variability provide important information about the physical processes and structural changes in the solar interior and in the solar atmosphere...The aim of this paper is to discuss the solar-cycle-related long-term changes in solar total and UV irradiances. The spaceborne irradiance observations are compared to ground-based indices of solar magnetic activity, such as the Photometric Sunspot Index, full disk magnetic flux, and the Mt. Wilson Magnetic Plage Strength Index.

total solar irradiance UV irradiance soalr magneti↗

Surface solar ultraviolet radiation for paleoatmospheric levels of oxygen and ozone

Many investigators have concluded that the level of solar ultraviolet radiation (200-300 nm) reaching the surface was a key parameter in the origin and evolution of life on earth. The level of solar ultraviolet radiation between 200 and 300 nm is controlled primarily by molecular absorption by ozone, whose presence is strongly coupled to the level of molecular oxygen. In this paper, a series of calculations is presented of the solar ultraviolet radiation reaching the surface for oxygen levels ranging from 0.0001 the present atmospheric level to the present level. The solar spectrum between 200 and 300 nm has been divided into 34 spectral intervals. For each spectral interval, the solar ultraviolet radiation reaching the earth's surface has been calculated by considering the attenuation of the incoming beam due to ozone and oxygen absorption. A one-dimensional photochemical model of the atmosphere was used for these calculations.

Levine, J. S.↗

Measurement of the oscillator strengths and autoionization widths of the neutral-aluminum multiplet 3s2 3p2 P0 - 3s 3p2 2P

The hook method is used in conjunction with absorption equivalent width measurements to determine the oscillator strengths and line widths of the Al I multiplet 3s2 3p2 P0 - 3s 3p2 2P at 176 nm. Autoionization is found to be the dominant decay channel for the two levels of the 3p2 2P term, with autoionizing widths of 4.0 and 0.87 x 10 to the 10th/sec for J of 3/2 and 1/2, respectively. The van der Waals scattering cross section for the Al I transition at 176.91 nm by He is determined to be (1.3 + or - 0.3) x 10 to the -14th sq cm at 2400 K, and a solar spectrum calculation centered at 176 nm shows that the Al I features are possible diagnostic probes of (1) solar non-LTE processes, and (2) the temperature minimum and structure of the lower chromosphere.

Lombardi, G. G.↗

On the global mean structure of the thermosphere

A self-consistent model of the global mean structure of the thermosphere is used to examine the ionospheric and thermospheric processes that control the structure of the thermosphere for solar minimum and maximum conditions during geomagnetic quiet periods. The model includes the physical and chemical processes believed to be dominant in the thermosphere and ionosphere. The total solar energy input available in the extreme ultraviolet and in the Schumann-Runge continuum portion of the solar spectrum is 14.1 x 10 to the 11th W and 21.5 x 10 to the 11th W for solar minumum and maximum, respectively. The calculated exospheric temperature is too small if maintained only by radiative processes, and an auroral heat source is necessary to bring the calculated global mean structure into agreement with the MSIS-83 empirical model for both solar minimum and maximum conditions. These results support the consensus that there is high-latitude heat source present at all times.

Roble, R. G.↗