Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selective Surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Correlating surface adsorbate configuration and electrochemical performance of IrO 2 during seawater-relevant electrolysis

Seawater electrolysis alleviates freshwater demand to produce clean hydrogen while eliminating the need for water purification steps. The anodic process, seawater oxidation, typically requires high overpotentials and yields low selectivity to oxygen via the oxygen evolution reaction (OER), primarily due to the competing chlorine evolution reaction (CER) and hypochlorite evolution reaction (HCER) in pH-neutral conditions. Here, combining in situ surface-enhanced Raman characterization, grand canonical density functional theory-based calculations, and kinetic Monte Carlo simulations, we report the evolution of surface adsorbate configurations driven by applied potential and pH during seawater-relevant OER over IrO 2 , a highly OER-active and chloride-corrosion-resistant catalyst. As a result, the chemical properties of active sites, and thereby the kinetics of OER and CER/HCER, are effectively tuned. However, it is revealed that there is no optimal combination of potential and pH to achieve both high activity and high selectivity for seawater-relevant OER. To address this limitation, we establish a correlation between activity/selectivity and surface adsorbate configurations, enabling the optimization of highly active and OER-selective IrO 2 -based catalysts in seawater-relevant oxidation by modulating the local adsorbate environment of active sites.

08 HYDROGEN↗
DOE OSTI2026

Methanol Steam Reforming on Ru/m-ZrO 2 : Sodium Promotion of the CO 2 -Forming Pathway

Sodium (Na) promotion of Ru/m-ZrO 2 was investigated to elucidate how an alkali modification tunes selectivity in methanol steam reforming (MSR). H 2 -TPR/XANES/EXAFS show that Na increases surface basicity and strengthens Ru–O interactions, shifting RuO x reduction and H 2 spillover to a higher temperature. DRIFTS reveals Na-induced red shifts of the formate ν(CH) band and changes in OCO vibrational splitting, consistent with weakening of the formate C–H bond and an altered binding geometry. CO 2 -TPD confirms a monotonic shift toward stronger basic sites with increasing Na concentrations. Under MSR conditions, Na selectively increases CO2 concentration at the expense of CO. At ~80% conversion and 325 °C, CO 2 selectivity increases from 12.0% (unpromoted) to 16.2, 21.0, and 26.5% for 0.5, 1.0, and 1.8% Na, respectively; at ~300 °C and ~66–69% conversion, CO 2 selectivity increases from 8.6% to 23.7% at 1.8% Na. Transient MSR experiments further show earlier and larger H 2 evolution upon Na addition, corroborating the promotion of the dehydrogenation/decarbonylation route to CO 2 + H 2 . We propose that Na increases basicity and modifies the Ru–support interface to favor formate dehydrogenation/decarboxylation, thereby increasing the H 2 yield and lowering CO formation. Ru’s higher-energy, less occupied d-band stabilizes CO and oxygenated intermediates more strongly in the reforming environment, making the CO-forming pathway more resistant to suppression than on Pt.

CO2 selectivity↗
DOE OSTI2024

Transfer of Millimeter‐Scale Strained Multiferroic Epitaxial Thin Films on Rigid Substrates via an Epoxy Method Producing Magnetic Property Enhancement

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO 3 (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi 3 Fe 2 Mn 2 O x (BFMO) layered supercell (LSC) material is selected as the thin film for this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.

bismuth oxides↗
DOE OSTI2024

Photoelectrochemical Nitrate and Nitrite Reduction Using Cu 2 O Photocathodes

Nitrate in wastewater streams causes eutrophication, and nitrate removal is of great importance for environmental protection. Electrochemical nitrate reduction has the advantage of directly converting nitrate to benign or useful chemicals, but it typically requires a considerable overpotential. Here, in this study, photoelectrochemical nitrate reduction is investigated using a Cu 2 O photocathode, where photoexcited electrons in the conduction band inherently have an overpotential of >1.6 V for nitrate reduction. The Cu 2 O photocathode is found to reduce nitrate to nitrite selectively with a high Faradaic efficiency (>85%). More importantly, as the surface of Cu 2 O is particularly catalytic for nitrate reduction, nitrate reduction on Cu 2 O kinetically suppresses photocorrosion of Cu 2 O without the need for additional catalyst or protection layers. In addition to nitrate reduction, nitrite reduction on Cu 2 O is examined to compare the effects of nitrate and nitrite reduction kinetics on the photocurrent generation and photocorrosion of Cu 2 O photocathodes.

25 ENERGY STORAGE↗
DOE OSTI2024

A lyotropic liquid crystal-templated nanofiltration membrane with thermo- and pH-responsive 3D transport pathway

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cryptate binding energies towards high throughput chelator design: metadynamics ensembles with cluster–continuum solvation

A tiered forcefield/semiempirical/meta-GGA pipeline together with a thermodynamic scheme designed with error cancellation in mind was developed to calculate binding energies of [2.2.2] cryptate complexes of mono- and divalent cations. Stable complexes of Na, K, Rb, Ca, Zn and Pb were generated, revealing consistent cation–N lengths but highly variable cation–O lengths and an amine stacking mechanism potentially augmenting the cation size selectivity. Metadynamics, used for searching the high-dimensional potential energy surface, together with a cluster–continuum model for affordable – yet accurate – solvation modeling, enabled the discovery of more stable geometries than those previously reported. Similar solvation energy curve shapes for lone vs. coordinated ions enabled rapid solvation convergence via the cancellation of errors stemming from finite cluster sizes. In conclusion, an R 2 of 0.850 vs. experimental aqueous binding energies was obtained, validating this scheme as the backbone of a high-throughput workflow for chelator design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self-assembled nanofiltration membranes with thermo- and pH-responsive behavior

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Additive manufacturing of complex objects using refractory matrix materials

A method for the manufacture of a three-dimensional object using a refractory matrix material is provided. The method includes the additive manufacture of a green body from a powder-based refractory matrix material followed by densification via chemical vapor infiltration (CVI). The refractory matrix material can be a refractory ceramic (e.g., silicon carbide, zirconium carbide, or graphite) or a refractory metal (e.g., molybdenum or tungsten). In one embodiment, the matrix material is deposited according to a binder-jet printing process to produce a green body having a complex geometry. The CVI process increases its density, provides a hermetic seal, and yields an object with mechanical integrity. The residual binder content dissociates and is removed from the green body prior to the start of the CVI process as temperatures increase in the CVI reactor. The CVI process selective deposits a fully dense coating on all internal and external surfaces of the finished object.

Terrani, Kurt A.↗
DOE OSTI2025

The Surface Chemistry of Methanol on TiO 2 (110): Effects of Pressure and Temperature on the Stability of C–O and C–H Bonds

Synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the surface chemistry of methanol on TiO 2 (110), examining the effects of methanol pressure, oxide temperature, and coadsorption with H 2 . At 300 K, the adsorption of methanol on TiO 2 (110) leads to the formation of CH 3 O on the surface with a minor amount of CH 3 OH present. The easy cleavage of the O–H bond in the alcohol agrees with the predictions of theoretical calculations, and most of the adsorbed CH 3 O was not associated with the presence of Ti 3+ sites in the oxide substrate. The adsorbed CH 3 O was removed from the TiO 2 (110) surface by heating to 600 K without the deposition of CH x fragments or C on the oxide. The results of temperature-programmed desorption (TPD) showed the evolution of methanol and formaldehyde at 360 and 490 K as a result of a disproportionation reaction: 2CH 3 O → CH 3 OH + CH 2 O. This surface chemistry, where there is no rupture of the C–O bond, and only selective cleavage of O–H and C–H bonds, is very different from that found on metals used in catalysts for methanol reforming, where massive conversion of the alcohol into CO, CH x and C species is seen. Furthermore, the TPD data indicate that any CH 3 O formed on the oxide surface can be hydrogenated and desorbed as CH 3 OH at temperatures below 550 K. In this respect, titania is an ideal support for catalysts employed to achieve methanol synthesis through CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Polymer-iron oxide hybrid films for controlling electrokinetic properties

Electrokinetic phenomena at polymer-water interfaces are central to technologies for water purification, ion separations, and energy conversion, yet the ability to systematically control polymer surface charge and associated electrokinetic processes remains limited. Here, we demonstrate a simple liquid-phase infiltration (LPI) method to synthesize polymer–metal oxide hybrid films with controllable interfacial properties. Hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) brushes grafted to silicon substrates were infiltrated with iron nitrate from ethanolic solution, followed by low-temperature thermal treatment to convert the infiltrated precursor into iron oxide. Spectroscopic ellipsometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis confirmed oxide incorporation and hybrid film formation without polymer degradation. Electrokinetic measurements reveal that the hybrid films acquire the electrokinetic properties of the infiltrated oxide, with concentration-dependent streaming potentials and surface conductivities closely matching those of pure iron oxide films. These results establish metal oxide infiltration as a scalable and low-cost strategy for controlling interfacial charge in polymer surfaces. The approach introduces new materials and design parameters for tailoring ion selectivity, transport, and energy conversion, with broad implications for the development of advanced membranes, electrokinetic harvesting devices, and polymer-supported oxide electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Surface Ligand Effects on Energetics, Charge Transfer, and Stability at Interfaces Between Metal Halide Perovskites and Organic Semiconductors

Chemistry at organic-inorganic interfaces plays a major role in determining the performance of electronic and optoelectronic devices. Understanding, developing, and using surface chemistry is thus essential for creating improved and novel materials and devices. Organic metal halide perovskites (HPs) are inexpensive semiconductors that can be printed from solution to make efficient photovoltaic cells for harvesting solar energy, light emitting diodes for energy efficient solid-state lighting applications, solid-state lasers, and even spin selective devices with applications to quantum computing. To realize the potential of HPs, their surface chemistry and interfacial properties must be better understood and appropriately adjusted to meet the needs of the targeted application. For example, surface chemistry influences non-radiative recombination, which influences the efficiency of light emission and solar energy conversion, charge-carrier injection and extraction from optoelectronic devices, and material and device stability. This research project centered around determining how the surface chemistry of HP thin films and nanoparticles influences optical properties, charge transfer processes, energetics, and stability. In this project we characterized ligand binding strengths to HPs; determined how surface ligand chemistry influences photoluminescence properties, energetics, and charge transfer processes; determined that surface ligands often penetrate into HPs and uncovered methods of reducing surface ligand penetration through structural modifications; and discovered how interfacial energetics impact charge transfer processes and photovoltaic performance parameters. Overall, this research established important insights into how surface ligands interact with HPs to influence their optical properties, electronic properties, stability, and device level performance.

14 SOLAR ENERGY↗
DOE OSTI2026

Product-promoted acetylene cyclotrimerization to benzene on Ag(111)

Acetylene cyclotrimerization to benzene on Ag(111) has recently been found to be 100% selective. However, it requires monolayer coverages, limiting its practical application due to the high pressure required to attain this surface coverage of acetylene near room temperature. Here, we show that co-adsorbed benzene, the reaction product, promotes cyclotrimerization at submonolayer acetylene coverages without compromising the 100% selectivity of Ag(111) via temperature-programmed desorption experiments. Scanning tunneling microscopy and density functional theory (DFT) calculations elucidate the origin of this effect whereby attractive acetylene–benzene interactions locally compress acetylene domains. DFT calculations further illustrate how co-adsorbed benzene reduces the transition-state energy for formation of the key C 4 intermediate, making cyclotrimerization competitive with desorption. Together, these findings reveal how product-reactant interactions can enhance C–C coupling.

Acetylene cyclotrimerization↗
DOE OSTI2024

Steam‐Assisted Selective CO 2 Hydrogenation to Ethanol over Ru−In Catalysts

Abstract Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. We here unveil how reducibility and mobility of indium oxide species in Ru‐based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru−In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

Zhou, Chengshuang↗
DOE OSTI2024

Steam-Assisted Selective CO 2 Hydrogenation to Ethanol over Ru–In Catalysts

Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. In this work, we unveil how reducibility and mobility of indium oxide species in Ru-based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru–In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modulating Mid-Gap Electronic States Through Site-Selective Modification in B-Pbx/B'-CuyV2O5/CdS Heterostructures for Photocatalytic Hydrogen Evolution

We interfaced ..beta..-Pbx/..beta..'-CuyV2O5 compounds, with varying stoichiometries of precisely positioned Pb-ions (x) and Cu-ions (y) in interstitial sites along a tunnel-structured ?-V2O5 framework, with cysteine-capped CdS (cysCdS) quantum dots (QDs) to yield heterostructured photocatalysts. ..beta..-Pbx/..beta..'-CuyV2O5 compounds exhibit midgap electronic states with orbital contributions from both Cu 3d and stereochemically active Pb 6s states that show distinctive light-initiated reactivity with photoexcited QDs. ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures were prepared by linker-assisted assembly (LAA). Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy revealed that cysCdS QDs were deposited onto surfaces of ..beta..-Pbx/..beta..'-CuyV2O5 via LAA. HAXPES revealed that the site-selective positioning of Pb-ions and Cu-ions promoted close energetic alignment of the midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds with the valence-band maximum of cysCdS QDs. Transient absorption spectroscopy revealed that photogenerated holes were transferred from CdS QDs to midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds on time scales <50 ps. Finally, photoelectrochemical and photochemical experiments revealed that ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the photocatalytic reduction of H+ to H2. In photoelectrochemical experiments, under oxidative conditions, for all ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at a Pt counter electrode while a sacrificial donor was oxidized at the heterostructure-functionalized working electrode. In contrast, under reductive conditions, for ..beta..-Pb0.152V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at the working electrode. In photochemical experiments, dispersed ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the reduction of H+ to H2 under white-light illumination; ..beta..'-Cu0.55V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, for which midgap states have Cu 3d orbital character, generated 2-fold more H2 than ..beta..-Pb0.152V2O5/CdS heterostructures. Cu-ion insertion thus appends additional acceptor surface states that improve ligand-mediated hole transfer from photoexcited QDs, but such states are intrinsically limited in mediating hole transport to the substrate as a result of the low mobility of holes in narrow Cu 3d-states. Our results reveal that the density and orbital character of midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds, tunable through recently developed site-selective ion insertion strategies, determine efficiencies of charge-transfer and charge-transport mechanisms that underpin photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unraveling the Structural Sensitivity of Metal Catalysts in Ethylene Hydroformylation: Insights from Theory and Experiments

Here, in this study, we combined experimental and theoretical methods to investigate the structural sensitivity of metal catalysts in the ethylene hydroformylation reaction. Among Rh, Pt, Ir, Ni, Au, Ag, Pd, and Cu catalysts studied using experimental and theoretical methods, Rh showed the highest selectivity toward the C-C coupling product from CO and C 2 H 5 (i.e., C 2 H 5 CHO). The results from DFT and microkinetic simulations revealed that the activation energy barrier for C-C coupling is lowest on the Rh nanocluster, which explains the experimentally observed highest C 2 H 5 CHO selectivity on the Rh catalyst. Furthermore, DFT results demonstrated that the sites located on the flat surfaces of nanoparticles primarily promote the hydrogenation reaction, leading to the formation of undesired C 2 H 6 . In contrast, undercoordinated edge and corner sites of the nanocluster promote the C-C coupling reaction. Thus, our results illustrate that the selectivity toward C 3 oxygenates in ethylene hydroformylation reaction can be steered by tuning the size of Rh nanoparticles (the best-performing catalyst) to optimize the active (edge and corner) sites that preferentially promote the C-C coupling reaction.

58 GEOSCIENCES↗
DOE OSTI2026

Nanoscale Amorphization of Poly(Triarylamine) for Efficient and Stable Inverted Perovskite Photovoltaics

Perovskite solar modules require hole-selective layers that combine efficient charge extraction, interfacial uniformity and scalable processing. Poly(triarylamine) (PTAA) is widely used in high-performance inverted perovskite photovoltaics, but its nanoscale crystallization and aggregation on indium tin oxide can disrupt film continuity, increase interfacial recombination and limit module stability. Here we show that 4-fluorobenzylphosphonic acid (4FBPA) modifies the surface of indium tin oxide to induce nanoscale amorphization of PTAA, forming a uniform sub-10-nm hole-selective layer. The molecule binds to indium tin oxide through a dehydration reaction, tunes the work function and surface free energy of the photoanode, and improves energy-level alignment with PTAA. The resulting amorphous PTAA film shows enhanced conductivity and hole extraction, suppresses non-radiative recombination at the buried interface and promotes more uniform perovskite growth. Inverted perovskite solar cells reach a power conversion efficiency of 26.63%, while blade-coated modules achieve a certified quasi-steady-state efficiency of 23.01%. The modules retain 95.9% of their initial efficiency after 2,600 hours of maximum-power-point operation under 1-sun illumination at 65 +- 5 degrees C in nitrogen. These results identify nanoscale amorphization of polymeric hole-selective layers as a route to efficient and stable inverted perovskite photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2024

Operando Surface-Enhanced Infrared Spectroscopy Connects Interfacial Dynamics with Reaction Kinetics During Electrochemical CO 2 Reduction on Copper

The reaction microenvironment plays a key role in dictating the selectivity of electrochemical CO 2 reduction. However, understanding the chemical nature of this microenvironment under operating conditions remains a substantial challenge. For this study, we employed attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) in operando for simultaneous measurements of reaction kinetics and concentrations of reactants and intermediates at the reaction interface, all under controlled mass transport conditions. These operando measurements enable direct correlations between the reaction microenvironment, mass transport, and kinetics for a Cu electrocatalyst, such as higher local concentrations of CO 2 under faster mass transport corresponding to higher rates of CO 2 reduction. We observed that faster mass transport decreased the *CO coverage at less negative potentials (-0.6 V RHE ) and increased the *CO coverage at more negative potentials (-1.1 V RHE ). We developed a transport-coupled kinetic model that captures these spectroscopic observations and provides insight into the processes controlling interfacial concentrations of reactants and intermediates, aiding future efforts toward tailoring reaction microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗