Search NASA⌕ Search

SEARCH · Search NASA

Results for “Self Identify”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Teleoperator/robot technology can help solve biomedical problems

Teleoperator and robot technology appears to offer the possibility to apply these techniques to the benefit for the severely handicapped giving them greater self reliance and independence. Major problem areas in the development of prostheses and remotely controlled devices for the handicapped are briefly discussed, and the parallelism with problems in the development of teleoperator/robots identified. A brief description of specific ongoing and projected developments in the area of remotely controlled devices (wheelchairs and manipulators) is provided.

Heer, E.↗

Bringing AI up to the space challenge

The state of the art in automated systems for working in environments hostile to humans is assessed, together with the technological advancements necessary to meet NASA goals. Since completely automated operations are not possible with the current level of artificial intelligence (AI), the operator must have access to remote television access and interactive computerized controls. A proximal system exists when the teleoperated mechanism is close enough so that negligible time passes between operator and servocontrolled activation and feedback. An additional constraint is the complexity of the signal. Further development areas have been identified as limiting the necessary communication, compensating for technical limitations of communication with remote systems, such as bandwidth, error rate, and equipment response time, and to build-in fault tolerance, self-diagnosis, and self-maintenance capabilities. An AI expert system is being developed at JPL to provide an expert knowledge base and a decision-making capability. It is suggested that only thorough questioning of mission and spacecraft experts, as well as searching the large volume of project documentations, will provide the necessary data for establishing an expert data base for AI implementation.

Heer, E.↗

Cosmic-ray lifetime in the Galaxy - Experimental results and models

The separation of the cosmic-ray Be isotopes achieved by two satellite experiments is discussed. From the measured isotopic ratio between the radioactive Be-10 (half-life = 1,500,000 years) and the stable Be-9, it is deduced that the cosmic rays propagate through matter with an average density of 0.24 = or - 0.07 atoms/ cu cm. The implications of this result for the cosmic-ray age is reviewed in the context of two models of confinement and propagation: the homogeneous model, normally identified with confinement ot the galactic gaseous disk, and a diffusion model in which the cosmic rays extend into a galactic halo. A newly deduced cosmic-ray pathlength distribution, a self-consistent model of solar modulation, and a set of fragmentation cross sections are calculated. It is concluded that in a homogeneous model, the cosmic-ray age is 15 (+7, -4) million years, about a factor longer than early estimates based on the abundances of the light nuclei Li, Be, and B and a nominal interstellar density of 1 atom/ cu cm.

Simpson, J. A.↗

A neural based intelligent flight control system for the NASA F-15 flight research aircraft

A flight control concept that can identify aircraft stability properties and continually optimize the aircraft flying qualities has been developed by McDonnell Aircraft Company under a contract with the NASA-Dryden Flight Research Facility. This flight concept, termed the Intelligent Flight Control System, utilizes Neural Network technology to identify the host aircraft stability and control properties during flight, and use this information to design on-line the control system feedback gains to provide continuous optimum flight response. This self-repairing capability can provide high performance flight maneuvering response throughout large flight envelopes, such as needed for the National Aerospace Plane. Moreover, achieving this response early in the vehicle's development schedule will save cost.

Urnes, James M.↗

Probing Acceleration and Turbulence at Relativistic Shocks in Blazar Jets

Diffusive shock acceleration (DSA) at relativistic shocks is widely thought to be an important acceleration mechanism in various astrophysical jet sources, including radio-loud active galactic nuclei such as blazars. Such acceleration can produce the non-thermal particles that emit the broad-band continuum radiation that is detected from extragalactic jets. An important recent development for blazar science is the ability of Fermi-Large Area Telescope spectroscopy to pin down the shape of the distribution of the underlying non-thermal particle population. This paper highlights how multiwavelength spectra spanning optical to X-ray to gamma-ray bands can be used to probe diffusive acceleration in relativistic, oblique, magnetohydrodynamic (MHD) shocks in blazar jets. Diagnostics on the MHD turbulence near such shocks are obtained using thermal and non-thermal particle distributions resulting from detailed Monte Carlo simulations of DSA. These probes are afforded by the characteristic property that the synchrotron vF(sub v), peak energy does not appear in the gamma-ray band above 100 MeV. We investigate self-consistently the radiative synchrotron and inverse Compton signatures of the simulated particle distributions. Important constraints on the diffusive mean free paths of electrons, and the level of electromagnetic field turbulence are identified for three different case study blazars, Mrk 501, BL Lacertae and AO 0235+164. The X-ray excess of AO 0235+164 in a flare state can be modelled as the signature of bulk Compton scattering of external radiation fields, thereby tightly constraining the energy-dependence of the diffusion coefficient for electrons. The concomitant interpretations that turbulence levels decline with remoteness from jet shocks, and the probable significant role for non-gyroresonant diffusion, are posited.

Baring, Matthew G.↗

Data & Reasoning Fabric: Minimum Viable Product

A Data & Reasoning Fabric (DRF) is envisioned to enable the full potential of advanced air mobility by providing all data and reasoning where they are needed. The DRF provides a marketplace based on an open foundational ecosystem of data and reasoning exchange between the many systems that must seamlessly interplay to manage the complex and dense airspace operations required to achieve advanced air mobility goals. DRF activities will identify, test and - as needed - research and develop critical core technologies. In order to deliver reference designs and development environments that catalyze broad private and public sector buy-in and self-sustaining development of DRF and associated standards, DRF activities will collaboratively test these technologies, open standards and architectures, and an integrated framework with end users.

UAM↗

Huntsville Urban Development II: Utilizing NASA Earth Observations to Map the Urban Heat Island and Evaluate Vulnerability in Huntsville, Alabama

Huntsville, Alabama has seen a boom in growth over recent years. One consequence of this urban expansion is the exacerbation of the Urban Heat Island (UHI) effect across the city. This project identified the areas within Huntsville the greatest potential for heat reduction and community health benefits from tree-planting efforts. The team created maps of land surface temperature (LST), the normalized difference vegetation index (NDVI), and the normalized difference built-up index (NDBI) over June through August from 2019 to 2022 using data from ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station, Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), Landsat 9 OLI-2 and TIRS-2. The team identified areas with high LST, low NDVI, and high NDBI as areas with the greatest potential for heat reduction via tree-planting. Social factors relating to age, race, income, and self-reported health were adapted from Tree Equity Score to map community need for tree cover. When combining social with environmental factors, the team determined areas with the greatest potential for UHI mitigation: west-central and north downtown Huntsville. The team’s partner organization, the City of Huntsville, can use this priority map to guide their future tree-planting, and weigh the factors assessed according to their preference.

James Karroum↗

From Here to Autonomicity: Self-Managing Agents and the Biological Metaphors that Inspire Them

We seek inspiration for self-managing systems from (obviously, pre-existing) biological mechanisms. Autonomic Computing (AC), a self-managing systems initiative based on the biological metaphor of the autonomic nervous system, is increasingly gaining momentum as the way forward for integrating and designing reliable systems, while agent technologies have been identified as a key enabler for engineering autonomicity in systems. This paper looks at other biological metaphors such as reflex and healing, heart- beat monitors, pulse monitors and apoptosis for assisting in the realization of autonomicity.

Sterritt, Roy↗

Principles of Sociology in Systems Engineering

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, often with different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated with all relevant information informing system decisions. Robert K. Merton studied the sociological principles of the sciences and the sociological principles he developed apply to systems engineering. Concepts such as specification of ignorance, common terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that should be employed by the systems engineer. In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, insider-outsider behavior, unintended consequences, and the self-fulfilling prophecy. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information. This also helps identify key sociological barriers to information flow through the organization. This paper will discuss this theoretical basis for the application of sociological principles to systems engineering.

Watson, Michael D.↗

PROCSIMA: Diffractionless Beamed Propulsion for Breakthrough Interstellar Missions

The following report describes a new propulsion concept based on self-guiding of combined light and particle beam and explores the physics, technology and design principles needed to implement such a system for an interstellar fly-by mission to Proxima b. While the relevant self-focusing mechanism has been considered in an optical context, this is the first application to space propulsion known to the authors.The purpose of the present study is to provide a broad overview of the pertinent physics and design principles, credibly assess propulsion capabilities, and lay a comprehensive foundation for further, more targeted investigations of critical system elements and processes. Starting from basic principles, this report describes the equations of motion and physical phenomena needed to establish the feasibility of self-guiding and furthermore analyze the production and sustainment of the self-guided beam. Compared with laser or particle beam propulsion alone, the self-guided beam concept introduces a plethora of light-matter interactions and additional complexities, imposing certain constraints on the geometric and physical characteristics of the beam sources. In particular, we have the identified the particle beam as a crucial element of the proposed concept. System constraints are quantitatively analyzed and then explored by developing and applying a mission design process to a Proxima b flyby mission as well as a nearer-term mission to the solar gravitational lens point.

Mechanism↗

Oxidation screening at 1204 C /2200 F/ of candidate alloys for the space shuttle thermal protection system.

Evaluation of the oxidation resistance of 15 alloys under some of the environmental conditions that might be encountered by the shuttle thermal protection system. The alloys included nickel-, iron-, and cobalt-base wrought alloys. Specimens were self-resistively heated to 1204 C (2200 F) in a 10-torr still-air environment for 100 thirty-minute cycles. Specimen weight, thickness, and microstructural changes were noted, and surface scales were identified by room-temperature X-ray diffraction. Based on these observations, the behavior of the alloys was evaluated in terms of overall amount of metal consumption due to oxide formation and relative tendency toward oxide spalling and scale vaporization.

Sanders, W. A.↗

Identification of the sigma source near 3C 273 - A new class of AGN?

The hard X-ray source detected with SIGMA at an offset of about 15 arcmin from 3C 273 may be identified with an uncataloged Einstein X-ray source detected in the deep Einstein HRI exposure of 3C 273 and in subsequent short IPC exposures. We have identified this source, within the SIGMA error circle, with a faint (mag 19-20) QSO at z = 0.57. Comparison of the SIGMA and Einstein fluxes with this optical object suggest it is highly self-absorbed, and possibly highly variable. The discovery of such a class of AGN would have important consequences for the cosmic X-ray background.

Grindlay, J. E.↗

Component-specific modeling

The ability to accurately structurally analyze engine components to assure that they can survive for their designed lifetime in an increasingly harsh environment is discussed. Under the HOST (HOt Section Technology) program, advanced component-specific modeling methods, with built-in analysis capability, will be developed separately for burner liners, turbine blades and vanes. These modeling methods will make maximum use of, but will not rely solely on, existing analysis methods and techniques, to analyze the three identified components. Nor will the complete structural analysis of a component necessarily be performed as a single analysis. The approach to be taken will develop complete software analysis packages with internal, component-specific, self-adaptive solution strategies. Each package will contain a set of modeling and analysis tools. The selection and order of specific methods and techniques within the set to be applied will depend on the specific-component, the current thermo-mechanical loading, and the current state of the component. All modeling and analysis decisions will be made internally based on developed decision criteria within the solution strategies; minimal user intervention will be required.

Hirschbein, M. S.↗

Development and evaluation of a Fault-Tolerant Multiprocessor (FTMP) computer. Volume 3: FTMP test and evaluation

The experimental test and evaluation of the Fault-Tolerant Multiprocessor (FTMP) is described. Major objectives of this exercise include expanding validation envelope, building confidence in the system, revealing any weaknesses in the architectural concepts and in their execution in hardware and software, and in general, stressing the hardware and software. To this end, pin-level faults were injected into one LRU of the FTMP and the FTMP response was measured in terms of fault detection, isolation, and recovery times. A total of 21,055 stuck-at-0, stuck-at-1 and invert-signal faults were injected in the CPU, memory, bus interface circuits, Bus Guardian Units, and voters and error latches. Of these, 17,418 were detected. At least 80 percent of undetected faults are estimated to be on unused pins. The multiprocessor identified all detected faults correctly and recovered successfully in each case. Total recovery time for all faults averaged a little over one second. This can be reduced to half a second by including appropriate self-tests.

Lala, J. H.↗

Genetic and molecular dosimetry of HZE radiation (US-1 RADIAT)

In order to estimate radiation exposure in space, experiments were conducted during the 1st International Microgravity Laboratory (IML-1) mission in order to isolate genetic changes in animal cells caused by cosmic rays. The space measurements were evaluated against results from synthetic cosmic rays produced by particle accelerators on the ground. The biological material used was the tiny soil nematode, Caenorhabditis elegans. The measurements were made by thermoluminescent detectors and plastic nuclear track detectors. The development and the chromosome mechanics in microgravity were studied, and the mutagenesis induced by radiation exposure was analyzed. The results showed that there are no obvious differences in the development, behavior and chromosome mechanics, as a function of gravity unloading (reproduction, self-fertilization and mating of males with hermaphrodites, gross anatomy, symmetry and gametogenesis, pairing, disjoining and recombination of chromosomes). A variety of mutants were isolated, and it was noted that mutants isolated from regions of identified high particles were more severely affected than those isolated by random screening. Linear energy transfer particles seem to favor large scale genetic lesions.

Nelson, Gregory A.↗

Crystallization Physics in Biomacromolecular Systems

The crystals are built of molecules of protein, nucleic acid and their complexes, like viruses, approx. 5x10(exp 3)+ 3x10(exp 6) Da in weight and 2 + 20 nm in effective diameter. This size strongly exceeds action range of molecular forces and makes a big difference with inorganic crystals. Intermolecular contacts form patches on the biomacromolecular surface. Each patch may occupy only a small percent of the whole surface and vary from polymorph to polymorph of the same protein. Thus, under different conditions (pH, solution chemistry, temperature, any area on the macromolecular surface may form a contact. The crystal Young moduli, E approx. equals 0.1 + 0.5 GPa are more than 10 times lower than that of inorganics and the biomolecules themselves. Water within biocrystals (30-70%) is unable to flow unless typical deformation time is longer than approx. 10(exp -5)s. This explains the discrepancy between light scattering and static measurements of E. Nucleation and Growth requires typically concentrations exceeding the equilibrium ones up to 100 times - because of the new size scale results in 10 - 10(exp 3) times lower kinetic coefficients than that needed for inorganic solution growth. All phenomena observed in the latter occur with protein crystallization and are even better studied by AFM. Crystals are typically facetted. Among unexpected findings of general significance are - net molecular exchange flux at kinks is much lower than that expected from supersaturation, steps with low (< approx. 10(exp -2)) kink density at steps follow Gibbs-Thomson law only at very low supersaturations, step segment growth rate may be independent of step energy. Crystal perfection is a must of biocrystallization to achieve the major goal to find 3-D atomic structure of biomacromolecules by x-ray diffraction. Poor diffraction resolution (> 3Angstrom) makes crystallization a bottleneck for structural biology. All defects typical of small molecule crystals are found in biocrystals, but the defects responsible for poor resolution are not identified. Conformational changes are one of them. Biocrystallization in microgravity reportedly results in 20% cases of better crystals. The mechanism of how lack of convection can do this is still not clear. Lower supersaturation, self-purification &om preferentially trapped homologous impurities and step bunching are viable hypotheses.

Chernov, A. A.↗

NASA Child Fitness Promotion Program in Young Children in South Korea

Childhood obesity is a serious global public health concern (WHO, 2015; Wang Y & Lobstein T, 2006). Low self-esteem and related mental health problems are common in obese children (Strauss RS, 2000) as well as poor academic performance and career development (Gurley-Calvez T, 2010).Westernized dietary habits and sedentary lifestyles are identified as the major risk factors of current alarming rate of obesity along with genetic susceptibility (Popkin BM, 1999). Children in many countries, including South Korea, have become increasingly sedentary due to urbanization changes in their respective societies (Ng SW, et al. 2009, Salmon J et al. 2011). In particular, South Korea had abundant dissemination of mobile technology, such as tablet and smart phone devices. Children have become reliant on mobile devices and are less likely to perform physical activities (Do, et al, 2013). Effective and sustainable intervention programs are needed to fight the global obesity epidemic (IOM, 2012; Wang Y et al, 2013; Wang Y et al, 2015). Previous studies suggested focus on prevention strategies that begin in early childhood, a period when children establish their life habits. (Salmon J et al. 2011). Recent systematic reviews and meta-analysis including ours found that obesity prevention programs for young children have a greater intervention effect (Waters E, et al, 2011; Wang Y et al, 2013; Wang Y et al, 2015). The NASA Mission X: Train Like an Astronaut (MX) program was developed to promote children's exercise and healthy eating with excitement for training like an astronaut (Lloyd C, 2012).At present, the NASA MX Program covered 28 countries, enrolled children through their teachers in school setting (MX report 2014, 2015). This pilot study adapted the NASA MX intervention program for young children in South Korea. We assessed its feasibility and effectiveness in promoting physical activity (PA) in children and in improving parents' perspectives. We also examined the status of PA in young children. More than 80% of five-year-old children go to a Kindergarten or day care center in South Korea (MH Suh et al, 2013).Thus, reaching young children through child care and education settings could be a good approach for early childhood obesity prevention.

Min, Jungwon↗

Mapping Rock and Soil Units in the MPF IMP SuperPan Using a Kohonen Self Organizing Map

The 1997 Mars Pathfinder mission provided information on a site in the Ares Vallis floodplain. Initial analysis of multispectral data from the Imager for Mars Pathfinder (IMP) indicated the presence of only a single rock type, the 'gray rock' spectral class and various coated variants thereof (e.g., 'maroon rock'). Continued analysis of the IMP 'SuperPan' mosaic has confirmed multiple examples of a second 'black rock' spectral class existing as small cobbles in the near field and as boulders in the far field. These results are consistent with recent analysis of MGS Thermal Emission Spectrometer (TES) data which indicates that there is likely a mix of both 'Surface Type 1' (ST1) and 'Surface Type 2' (ST2) spectral classes at the MPF landing site. Nominally, the black rock spectral class would correspond to ST1 (basalts) and 'gray rock' would correspond to ST2 (andesites). Orbital remote sensing has also revealed the pervasive presence of layering on Mars. Recently it was suggested that there are extensive outcrops of the black rock spectral class in the SuperPan far field on the flanks of the Twin Peaks and on the rim of Big Crater. These authors suggested that these exposures represented outcrops of black rock from beneath a surficial, flood deposited layer. In this work, we have reexamined the MPF IMP SuperPan mosaic using an artificial neural network self organizing map (SOM) processing architecture in order to classify the distribution of spectral classes within the SuperPan. In this paper, we present initial results from that work and draw specific attention to a subset of the identified spectral classes in order to address questions relating to whether there are extensive exposures of black rock in the IMP far field, what other materials might be exposed in the far field, and what evidence there is for subsurface layering at the MPF landing site.

Farrand, W.↗