Search NASA⌕ Search

SEARCH · Search NASA

Results for “Silicon Solar Cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Understanding and Advancing Bifacial Thin Film Solar Cells

Because bifacial solar cells increase the power generated per area, their market share is projected to increase over the next decade. While silicon technologies have implemented bifacial technology, little progress has occurred in bifacial thin film (BTF) solar cells. Understanding the factors that limit performance is critical to advancing BTF cells. We show that recombination at the back interface has limited device performance of fabricated BTF devices. Improved BTF performance will require decreasing recombination at the back interface, through passivation or by reducing downward band-bending at this interface. Increasing carrier lifetimes improves performance, but increasing hole density has little effect.

14 SOLAR ENERGY↗
DOE OSTI2024

Electronic, direct optical, and phonon-assisted optical properties of 4H Si from first principles

The cubic polytype of silicon (Si) is the most commercialized semiconductor material and finds applications in numerous electronic and optoelectronic devices, such as solar cells. However, recent reports on the synthesis of the hexagonal 4H Si polytype have attracted the attention of the scientific community to understand its functional properties. Here, we report the electronic, vibrational, and optical properties of the 4H Si polytype obtained with predictive first-principles calculations, with an emphasis of phonon-assisted absorption in the indirect regime. Compared to the cubic polytype, 4H Si shows a slightly narrower indirect gap by ∼0.05 eV. The calculated phonon-assisted optical spectra show that 4H Si exhibits a stronger absorption coefficient than cubic Si across the visible and IR spectral regions. We further evaluate the short-circuit current density of textured thin-films. We demonstrate that 4H Si can achieve the same short-circuit current density for a five times thinner film compared to the cubic polytype, which mainly resulted from absorption in the indirect gap regime. Our work demonstrates the advantages of 4H Si for thin-film silicon-based solar-cell applications.

Materials Science↗
DOE OSTI2021

Enabling bifacial thin film devices by developing a back surface field using Cu x AlO y

Bifacial solar cells have the potential to increase the energy yield per unit area over traditional monofacial devices without significant added cost, driving $/kWh costs lower and accelerating the adoption of solar photovoltaics. However, the performance of bifacial thin film solar cells significantly lags that achieved by crystalline silicon cells. Here we incorporate wide bandgap Cu x AlO y as a back buffer layer for CdTe devices and achieve a backside illuminated device with high current density and high fill factor. Moreover, these values remain nearly constant even as the absorber layer thickness changes, indicating that a fully-depleted device is not required for efficient charge collection. We show that this response is indicative of a back surface field, albeit with a persistent high back surface recombination velocity. By managing electron reflection, we achieved a backside illumination conversion efficiency of 7.1% and bifaciality of 0.55 for a 3.3 µm CdTe device and 8.0% and 0.62 for a 2 µm device. Future improvements can be made by identifying and incorporating a passivation material that reduces the back surface recombination velocity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental Validation of a Module Cell Cracking Model

The What's Cracking app can predict how changes in crystalline silicon photovoltaic (PV) module materials, design, and mounting affect its susceptibility for cell fracture under uniform loading. This work has experimentally validated the app. A set of commercial crystalline silicon PV modules was obtained for this study. The modules were uniformly loaded at three different mounting points, and their subsequent cell fractures were recorded. A large sample size allowed for the development of an experimental statistical model for cell fracture. Here, the comparison of the experiment to predictions from the app is in excellent agreement. Both experimental and modeling results also elucidate how moving the module mounting points toward the center of the module increases the probability of cell fracture.

14 SOLAR ENERGY↗
DOE OSTI2023

Degradation Mechanisms in TOPCon/POLO Solar Cells

This presentation shows how Poly-Si/SiO2 contacts show a post firing degradation/regeneration cycle. The following conclusions were made: 1) cycle changes surface passivation (Jo), but not the bulk lifetime; 2) cycle time depends on anneal temperature in light or dark (higher T, faster cycle); 3) 400 degrees Celsius anneal eliminates the cycle - only generation occurs; 4) cycle time and magnitude is not correlated with Tfire; 5) contact passivation is stable after cycling; 6) fundamental nature of defect(s) responsible is not known; 7) TOPCon cells/modules, if constructed well, seem to show minimal degradation issues (PVEL, Jolywood, Jinko, ET Solar), and 8) NREL/ASU are studying TOPCon cells and UC Davis has a molecular dynamics model for TOPCon.

degradation↗
DOE OSTI2021

Assessing UV-Induced Degradation in Bifacial Modules of Different Cell Technologies

Bifacial technology enables solar cells to offer higher power output and lower levelized cost of energy compared to their monofacial counterparts. Here, we examined the adverse effects of ultraviolet-induced degradation (UVID) on a variety of high-efficiency silicon wafer-based bifacial cell technologies, including silicon heterojunction (SHJ), interdigitated back contact (IBC), passivated emitter rear contact (PERC), and passivated emitter rear totally-diffused (PERT). Both the front and rear sides of bifacial cells without any encapsulation were exposed to an artificially accelerated UV exposure test. After 2000 h of UV irradiation, the bifacial cells exhibited greater power loss with backside exposure indicating potential sensitivity of the rear passivation to UV. The highest power degradation is observed in SHJ cells, followed by p-PERC and n-PERT cell technologies. The degradation in SHJ cells is attributed to the reduction in V oc and FF, while the degradation in p-PERC and n-PERT cells is correlated with a significant drop in I sc . This suggests that each cell type/make degrades via different degradation pathways.

bifacial cells↗
DOE OSTI2021

Templated Vapor-Liquid-Solid Epitaxy of III-V Semiconductors on Silicon

Epitaxial growth on silicon remains the most promising method to reduce the cost of optoelectronic-quality III-V semiconductors. Several approaches exist to epitaxially grow III-V material from the vapor phase, but control of 3-D structures remains difficult with these methods. In this work, we present a novel epitaxial growth technique in which photolithography and wet etching are used to establish the geometry of group-III metal, which is then converted to III-V semiconductor by annealing with exposure group-V precursor. The resulting material has been shown to align to the substrate lattice and is optically active, making it a promising approach for III-V PV technologies.

government↗
DOE OSTI2024

Correlative analysis of CsPbBr2Hal (Hal = Cl, Br, I) meltcrystallization paramete

Abstract — Metal halide perovskites (MHPs) are an exciting research topic as they have the potential to make solar cells that are both more efficient than current siliconbased designs and have a wider range of applications. In this work the crystallization of CsPbBr2Hal (Hal = Cl, Br, I) halide perovskite melts were studied by the differential thermal analysis method. It was established that the crystallization of CsPbBr2Hal (Hal = Cl, Br, I) melts can be “hot” (i.e., at temperatures above the point of the alloy’s start-melting temperature) or with supercooling. The replacement of the bromine atom with another halogen atom leads to a shift of the dwell temperature range, at which “hot” crystallization takes place, from 830-846 K for CsPbBr3 to 807-832 K for CsPbBr2Cl and 741-768 K for CsPbBr2I. The activation energy of “hot” crystallization decreases in the same order. A linear dependence between the pre-exponential factor (ln(𝑽𝑽𝒄𝒄𝒄𝒄𝒄𝒄𝒔𝒔𝒕𝒕 𝟎𝟎 )) and the activation energy (Ea) of the crystallization process is revealed from the experimental data, proving the compensation effect.

Kopach, O.↗
DOE OSTI2025

Spatial‐Uniformity–Driven Bayesian Optimization for Rapid Development of Printed Perovskite Solar Cells

Printed metal halide perovskites can enable rapid, roll-to-roll manufacturing of a broad class of optoelectronics—flexible solar cells and imagers among them—while promising cost and speed advantages over incumbent silicon. However, though current methods offer high throughput and patterning capabilities, perovskite films’ spatial heterogeneity remains a challenge for large-area devices. Here, a spatial-uniformity-driven Bayesian optimization (BO) approach is leveraged to accelerate the development of printed perovskite solar cells and improve large-area device performance. Using a BO surrogate model, a 6D design space of ink chemistry and printing physics is explored via extensive iterative experimentation (≈100) informed by an objective function capturing spatial photoluminescence (PL) variance. It is discovered that optimizing for uniformity drives rapid advances in photovoltaic performance, yielding ≈20% power conversion efficiency (PCE) for small area (0.134 cm 2 ) devices and > 16% for large area (1 cm 2 ) devices. This machine-learning approach simultaneously enables rheological comparison of ink formulations that accelerate the leveling of Saffman-Taylor artifacts and improve film uniformity. Here, this showcases uniformity-driven BO as an efficient approach for uncovering the key printing physics and mitigating spatial heterogeneity to enable device scaling beyond small cell areas.

14 SOLAR ENERGY↗
DOE OSTI2023

Understanding the origin of Tabula Rasa-induced defects in n-type Cz c-Si: The case of nitrogen atmosphere

Phosphorus-doped Czochralski-grown silicon (Cz-Si) has been gaining market share in the large-scale manufacturing of high-efficiency silicon (Si)-based photovoltaic (PV) devices thanks to higher carrier lifetimes than their boron-doped counterpart. However, the fabrication of n-type Cz-Si based solar cells often requires process steps with much higher temperatures and longer times than p-type Silicon. Defect interaction with the high temperatures during such processes tend to be detrimental to the n-type Cz-Si carrier lifetime, therefore limiting the final device efficiency. Short thermal anneals before cell processing, known as Tabula Rasa (TR), have been proposed to mitigate the thermally induced lifetime degradation during n-type Cz-Si solar cell fabrication. This work thoroughly investigates the defects responsible for the lifetime degradation after TR in a N 2 atmosphere treatment. We use temperature-injection-dependent lifetime spectroscopy and the thickness variation method to decouple the effects of TR treatment in the bulk and the surface of the n-type Cz-Si wafers. Using the defect parameter contour mapping (DPCM), we identify the defect energy level (E t ) and the capture cross-section ratio (k) of the most likely process-induced defect, which aligns with previously proposed Si vacancy-associated defects. The DPCM reveals that these vacancy-associated defects have a shallow energy level E t - E v ~0.13 eV and very efficient electron capture cross section k~600. Unexpectedly, the bulk degradation due to vacancy defects in the volume of the wafer, is accompanied by a significant increase in the surface recombination as well. Through evaluating the surface recombination velocity temperature- and injection dependence, we show that after TR, at room temperature and for an injection level of 10 15 cm -3 , in a wafer passivated with a-Si:H(i) the surface recombination dominates the overall lifetime response. Here we hypothesize that the near surface vacancy-associated bulk defects play a role in lowering the electron diffusion current into the a-Si:H(i) from the c-Si(n) reducing the field-effect passivation.

14 SOLAR ENERGY↗
DOE OSTI2020

Surface Photovoltage Measurement of Perovskite Solar Cells to Screen Carrier Selective Contacts

SPV measurement through the Kelvin probe method is described. Silicon heterojunction structures show the maximum SPV of 700 V. Measurement on perovskite structures, and the results suggest adding BCP with C60 enhances the selectivity of C60 electron contact. Furthermore, PTAA and PTAA/PFN have similar selectivity but NiO x is poorly selective. SPV is an easy way to provide a relative comparison between various cell structures and contact layers to determine the relative extractable Voc and properties of the contact layer (selectivity, passivation) limiting the efficiency.

Kavadiya, Shalinee↗
DOE OSTI2021

CdSexTe1-x/CdTe Devices with Reduced Interface Recombination Through Novel Back Contacts and Group-V Doping

Since excellent carrier lifetimes and front interface electronic quality are now achieved, rear interface recombination can limit V OC in CdSexTe1-x/CdTe solar cells. Several back-contact structures for devices were fabricated using combinations of tellurium, aluminum oxide, amorphous silicon, and indium tin oxide (ITO). Time-resolved photoluminescence was used to characterize such structures. We show increasingly improved interface passivation through the subsequent use of aluminum oxide, amorphous silicon, and ITO. Additionally, we show that arsenic-doped absorbers form a more passive interface with numerous back contact structures.

aluminum oxide↗
DOE OSTI2021

Multimodal X-ray Microscopy: The Kinetics of Cu in CdTe Absorbers

The behavior of solar cells is very often limited by inhomogeneously distributed nanoscale defects. This is the case throughout the entire lifecycle of the solar cell, from the distribution of elements and defects during solar cell growth as well as the charge-collection and recombination during operation, to degradation and failure mechanisms due to impurity diffusion, crack formation, and irradiation- and heat-induced cell damage This has been known for a while in the field of crystalline silicon, but inhomogeneities are far more abundant in polycrystalline materials, and are the limiting factor in thin-film solar cells where grain sizes are often on the order of the diffusion length. We showed that the high penetration of hard X-rays combined with the high sensitivity to elemental distribution, structure, and spatial resolution offers a unique avenue for highly correlative studies at the nanoscale. We presented results on Cu-doped CdTe, where carrier collection is directly correlated to the kinetics of Cu inside the absorber and the particular Cu-phases at the ZnTe/CdTe interface. We complemented the results with modeling using PVRD-FASP and PyCDTS, where the X-ray beam induced profile can be reproduced by the equilibrium defect concentrations proposed by the solvers.

Bertoni, Mariana↗
DOE OSTI2020

Enabling Ultrathin III-V Solar Cells Using Dual Photonic Crystals

III-V materials provide the highest efficiencies, but the higher cost of these materials compared to other alternatives such as silicon has limited their applications. One way of reducing the costs is by minimizing the amount of material needed. In this work, using optical simulations we test light trapping layers in the front and in the back of a GaAs single junction solar cell. By using these layers, we predict that we can obtain near optically thick GaAs single junctions with only 300 nm active material, with maximum calculated J sc of 28.7 mA/cm 2 under the radiative limit.

14 SOLAR ENERGY↗
DOE OSTI2025

Measurement of Contact Resistivity In Symmetric Polycrystalline Si/SiO x /Monocrystalline Si Test Structures Using Variable Light Illumination

While different methods exist to determine the contact resistivity in semiconductor devices, these methods are limited to measurement of the majority carrier contacts. The measurement of p‐ or n‐type contacts on n‐ or p‐type crystalline silicon, respectively, is challenging due to the blocking diode formed by the p–n junction. In this article, we address this problem for tunneling oxide passivating contacts used in high‐efficiency Si solar cells. We propose a universal method to extract contact resistivity on symmetric test structures with polycrystalline silicon on SiO x (poly‐Si/SiO x ) passivating contacts under illumination, both for p–n and high–low‐junction passivated contacts. In this method, we demonstrate that the total contact resistance of each cell grid finger to the base wafer is governed by its effective contact area, defined by the transfer length extending from both sides of the finger. Therefore, the grid contact resistance of a poly‐Si contact depends on the ratio of the doped poly‐Si sheet resistance to the tunneling contact resistivity.

14 SOLAR ENERGY↗
DOE OSTI2025

Solar Cell Metallization Wear is Sensitive to Loading Frequency

Here, we performed cyclic loading of photovoltaic laminates with precracked silicon cells to explore if and how loading frequency and contact pressure influence the ensuing gridline wear-out process. A measurement of parallel resistance across cracked gridlines on a laminated cell coupon was used as the metric for gridline electrical contact degradation. A statistical analysis of variance (ANOVA) analysis of the experimental results discerned that loading frequency is a more significant factor than contact pressure for gridline degradation.

14 SOLAR ENERGY↗
DOE OSTI2024

Passivation Mechanisms in Locally Etched P-Type Poly-Si on Silicon Nitride/Silicon Oxide Stack

Tunneling oxide passivated contacts are quickly becoming the industry standard for high-efficiency c-Si based photovoltaic cells. Further development of these structures is essential to enable higher efficiencies and better reliability of cells. By utilizing poly-Si/SixNy/SiOx stacks, very high efficiencies have been demonstrated on small area cells. In this work we investigate the cause of the excellent passivation seen by these structures and show that the primary reason of the excellent passivation seen is the blocking B diffusion to the SiOx/c -Si interface. We also show that the interface between the silicon nitride and polysilicon affects B diffusion through to the c-Si interface. Finally, we demonstrate that the composition of the nitride used is of great importance, and that an incorrect nitride composition leads to B diffusion, and is directly correlated to poor passivation performance.

industries↗
DOE OSTI2020

Advances in Silicon-Nanoelectronics, Nanostructures and High-Efficiency Si-Photovoltaics

This Special Issue of physica status solidi (a) features presentations of Symposium D, 2019 Spring-EMRS Meeting in Nice, France. Silicon in various bulk forms remains a fascinating material allowing for solar cell efficiency records by ultimate passivation of the bulk, surfaces, and contacts. In parallel, Si nanostructures emerge as capable building blocks in diverse fields ranging from nano-electronics and photonics to sensing. This symposium aimed to share the latest research in these fields and to create new interdisciplinary ideas.

14 SOLAR ENERGY↗