Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatial Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Prediction of Broadband Blade-Wake Back-Scatter Noise from a Hovering Ideally Twisted Rotor using OVERFLOW2-ANOPP2

This work illustrates the use of a hybrid RANS/LES framework for the prediction of broadband noise via integral formulations from an ideally twisted hovering rotor. Four simulations were conducted, which investigated the effect of different turbulence modeling and spatiotemporal resolutions. The aerodynamic performance and aeroacoustics predicted by these four computational cases were compared against data acquired in the Small Hover Anechoic Chamber at the NASA Langley Research Center and against previous simulations conducted using the lattice-Boltzmann solver, PowerFLOW. The simulation case with the finest spatial resolution had the most favorable aerodynamic performance and broadband noise comparison with measured data; however, the simulation case utilizing the SST-DDES turbulence model predicted the most accurate tonal noise signature. Aerodynamic flowfield visualizations identified near-wake trailing edge vortex shedding, perpendicular blade-vortex interactions, and tip vortex formation, which are known to cause broadband noise. The fluid dynamics associated with a new broadband noise source, blade-wake back-scatter, were also identified. Lastly, a broadband noise source visualization technique was utilized to confirm the presence of blade-wake back-scatter as a dominant broadband noise source.

blade-wake back-scatter↗
NASA NTRS2016

Impact of Spatial Sampling on Continuity of MODIS-VIIRS Land Surface Reflectance Products: A Simulation Approach

With the increasing need to construct long-term climate-quality data records to understand, monitor, and predict climate variability and change, it is vital to continue systematic satellite measurements along with the development of new technology for more quantitative and accurate observations. The Suomi National Polar-orbiting Partnership mission provides continuity in monitoring the Earths surface and its atmosphere in a similar fashion as the heritage MODIS instruments onboard the National Aeronautics and Space Administrations Terra and Aqua satellites. In this paper, we aim at quantifying the consistency of Aqua MODIS and Suomi-NPP Visible Infrared Imaging Radiometer Suite (VIIRS) Land Surface Reflectance (LSR) and NDVI products as related to their inherent spatial sampling characteristics. To avoid interferences from sources of measurement and/or processing errors other than spatial sampling, including calibration, atmospheric correction, and the effects of the bidirectional reflectance distribution function, the MODIS and VIIRSLSR products were simulated using the Landsat-8s Operational Land Imager (OLI) LSR products. The simulations were performed using the instruments point spread functions on a daily basis for various OLI scenes over a 16-day orbit cycle. It was found that the daily mean differences due to discrepancies in spatial sampling remain below 0.0015 (1) in absolute surface reflectance at subgranule scale (i.e., OLI scene size).We also found that the MODISVIIRS product intercomparisons appear to be minimally impacted when differences in the corresponding view zenith angles (VZAs) are within the range of -15deg to -35deg (VZA(sub v) - VZA(sub m)), where VIIRS and MODIS footprints resemble in size. In general, depending on the spatial heterogeneity of the OLI scene contents, per-grid-cell differences can reach up to 20.Further spatial analysis of the simulated NDVI and LSR products revealed that, depending on the user accuracy requirements for product intercomparisons, spatial aggregations may be used. It was found that if per-grid-cell differences on the order of 10(in LSR or NDVI) are tolerated, the product intercomparisons are expected to be immune from differences in spatial sampling.

VIIRS↗
NASA NTRS1989

Simulation of electrostatic ion instabilities in the presence of parallel currents and transverse electric fields

A spatially two-dimensional electrostatic PIC simulation code was used to study the stability of a plasma equilibrium characterized by a localized transverse dc electric field and a field-aligned drift for L is much less than Lx, where Lx is the simulation length in the x direction and L is the scale length associated with the dc electric field. It is found that the dc electric field and the field-aligned current can together play a synergistic role to enable the excitation of electrostatic waves even when the threshold values of the field aligned drift and the E x B drift are individually subcritical. The simulation results show that the growing ion waves are associated with small vortices in the linear stage, which evolve to the nonlinear stage dominated by larger vortices with lower frequencies.

Nishikawa, K.-I.↗
NASA NTRS1990

Simulation of electrostatic turbulence due to sheared flows parallel and transverse to the magnetic field

A spatially two-dimensional electrostatic particle simulation code is used to examine the stability of a plasma equilibrium characterized by a localized transverse dc electric field and a magnetic-field-aligned electron drift for L much less than Lx, where Lx is the simulation length in the x direction and L is the scale length associated with the dc electric field. It is found that the dc electric field and the field-aligned current can together play a synergistic role to enable the excitation of electrostatic waves even when the threshold values of the field-aligned drift and the E x B drift are individually subcritical. The simulation results indicate that a broadband turbulence is associated with such an equilibrium.

Nishikawa, K.-I.↗
NASA NTRS2007

Hairpin Vortices and the Final Stages of Transition

A spatially developing direct numerical simulation has been performed for flow over a flat plate that is subjected to a one-time fluid injection through an elongated slit in the wall. The flow parameters have been chosen to closely approximate the experimental conditions of Haidari, Taylow, and Smith (AIAA-89-0964). A hairpin vortex quickly develops near the upstream end of the slit, and a pair of necklace vortices form around the slow-moving injection fluid. As seen in the experiments and reported in Haidari and Smith (in review, JFM), the hairpin vortex spawns both in-line and sidelobe secondary vortices. However, no subdsidiary vortices (those formed by the inviscid deformation of a vortex-line bundle) are observed. At later times, a set of three different types of vortices are identified: hairpin vortex structures with heads that rise away from the wall horseshoe-shaped vortices that do not rise out of the boundary layer, and quasi-streamwise vortices. These structures interact with each other and with the wall layer to generate new vortices that are similar in structure to those mentioned above, although a particular parent vortex may have an offspring that more nearly resembles another member of the set. Perturbation velocity and vertical vorticity contours reveal an arrowhead shape of the highly disturbed region that is reminiscent of a turbulent spot. Spatially averaged velocity profiles in the highly disturbed area are nonlaminar, but as yet do not show typical low-of-the-wall behavior.

Singer, Bart A.↗
NASA NTRSDate not supplied

Recalibration of the NASA Exterior Effects Room

The Exterior Effects Room (EER) is a psychoacoustic testing facility at NASA Langley Research Center which primarily focuses on testing human response to aircraft noise. The 39-seat auditorium houses a real-time spatial audio system and flyover simulation environment. The audio server utilizes an implementation of three-dimensional vector base amplitude panning (VBAP), a perceptual spatial audio technique exploiting loudspeaker triplets to place a virtual sound source at an arbitrary spatial position. Due to the irregular room geometry and non-uniform loudspeaker setup, the audio server applies equalization filtering to compensate for spectral coloration attributed to loudspeaker installation, crossover filtering, and delay/gain offsets. These filters can incorporate measurements taken at multiple listening points, allowing a more extensive listening area than filters derived from measurements taken at a single listening point. This work endeavors to update the existing equalization filter generation process by producing a new set of filters for various human subject testing scenarios.

calibration↗
NASA NTRSDate not supplied

Recalibration of the NASA Exterior Effects Room

The Exterior Effects Room (EER) is a psychoacoustic testing facility at NASA Langley Research Center which primarily focuses on testing human response to aircraft noise. The 39-seat auditorium houses a real-time spatial audio system and flyover simulation environment. The audio server utilizes an implementation of three-dimensional vector base amplitude panning (VBAP), a perceptual spatial audio technique exploiting loudspeaker triplets to place a virtual sound source at an arbitrary spatial position. Due to the irregular room geometry and nonuniform loudspeaker setup, the audio server applies equalization filtering to compensate for spectral coloration attributed to loudspeaker installation, crossover filtering, and delay/gain offsets. These filters can incorporate measurements taken at multiple listening points, allowing a more extensive listening area than filters derived from measurements taken at a single listening point. This work endeavors to update the existing equalization filter generation process by producing a new set of filters for various human subject testing scenarios.

Signal Processing↗
NASA NTRS1977

Investigation of thematic mapper spatial, radiometric, and spectral resolution

Empirical evidence was provided for the definition of system specifications for the LANDSAT Follow-On Thematic Mapper (TM) and other future space Multispectral Sensor (MSS) systems. Specific sensor parameters addressed were spatial resolution, radiometric sensitivity, and to a lesser degree spectral bandwidths and locations. The study used selected available aircraft MSS data, characterized by narrow spectral bands, fine spatial resolution, and high signal-to-noise, as the basis for simulating spacecraft TM data of various spatial resolutions, radiometric sensitivities, and sets of spectral bands. The primary measure used in evaluating the effects of varying spatial and radiometric resolutions was agricultural crop mensuration accuracy using automatic (computer) information extraction techniques.

Morgenstern, J. P.↗
NASA NTRS1988

Studying Turbulence Using Numerical Simulation Databases, 2. Proceedings of the 1988 Summer Program

The focus of the program was on the use of direct numerical simulations of turbulent flow for study of turbulence physics and modeling. A special interest was placed on turbulent mixing layers. The required data for these investigations were generated from four newly developed codes for simulation of time and spatially developing incompressible and compressible mixing layers. Also of interest were the structure of wall bounded turbulent and transitional flows, evaluation of diagnostic techniques for detection of organized motions, energy transfer in isotropic turbulence, optical propagation through turbulent media, and detailed analysis of the interaction of vortical structures.

Source record↗
NASA NTRS1990

The JPL/KSC telerobotic inspection demonstration

An ASEA IRB90 robotic manipulator with attached inspection cameras was moved through a Space Shuttle Payload Assist Module (PAM) Cradle under computer control. The Operator and Operator Control Station, including graphics simulation, gross-motion spatial planning, and machine vision processing, were located at JPL. The Safety and Support personnel, PAM Cradle, IRB90, and image acquisition system, were stationed at the Kennedy Space Center (KSC). Images captured at KSC were used both for processing by a machine vision system at JPL, and for inspection by the JPL Operator. The system found collision-free paths through the PAM Cradle, demonstrated accurate knowledge of the location of both objects of interest and obstacles, and operated with a communication delay of two seconds. Safe operation of the IRB90 near Shuttle flight hardware was obtained both through the use of a gross-motion spatial planner developed at JPL using artificial intelligence techniques, and infrared beams and pressure sensitive strips mounted to the critical surfaces of the flight hardward at KSC. The Demonstration showed that telerobotics is effective for real tasks, safe for personnel and hardware, and highly productive and reliable for Shuttle payload operations and Space Station external operations.

Mittman, David↗
NASA NTRS1990

Topographic distribution of clear-sky radiation over the Konza Prairie, Kansas

A method for exploring the topographic modulation of clear-sky incoming radiation using a two-stream atmospheric model together with digital elevation data is presented to obtain the temporal and spatial distribution of this energy. Utilizing this methodology for the Konza Prairie, it is observed that the variance and spatial autocorrelation of the simulated radiation data changed with sun angle and elevation grid spacing. An analytical formula that describes the behavior of the variance as a function of optical depth, sun angle, and mean terrain slope can be developed by considering direct solar radiation variability on a constant-slope terrain which has a uniform albedo and a uniform distribution of slopes. The decrease in mean slope and the increase in slope and autocorrelation is attributed to a loss of some of the shorter-wavelength terrain features at coarser grid spacings.

Dubayah, Ralph↗
NASA NTRS1991

Do clusters of galaxies affect the spectrum of the microwave background?

The distortion, averaged over the sky, due to the Compton scattering of background photons with electrons in the hot gas in clusters of galaxies is calculated. Using an existing sample of X-ray clusters, various values of the density parameter Omega, and plausible models for cluster evolution, Monte Carlo realizations of the microwave sky are generated. The spatial structure of these simulations shows a network of discrete sources whose properties can be a strong function of both evolution and Omega. The amount of spectral distortion in the models is greatest for models characterized by self-similar cluster evolution in an open universe and is within an order of magnitude of the current upper limits. Thus, improved observational sensitivity must inevitably detect some deviation from a blackbody spectrum.

Markevitch, M.↗
NASA NTRS1991

Spectral simulations of reacting turbulent flows

Spectral methods for simulating flows are reviewed, emphasizing their recent applications to reacting flow problems. Various classifications of spectral methods and their convergence properties are described and the 'spectral element' method is presented, highlighting its flexibility in dealing with complex flow geometries. The applications considered include chemical reactions in homogeneous turbulence, temporally evolving mixing layers, variable-density simulations, nonequilibrium chemistry, and spatially evolving mixing layers.

Mcmurtry, Patrick A.↗
NASA NTRS1992

Secondary instabilities in compressible boundary layers

The secondary instability mechanisms in a two-dimensional (2-D) compressible boundary layer over a flat plate have been examined for a range of Mach numbers up to 4.5. For subsonic and low supersonic flows, fundamental resonance dominates when the amplitude of the (2-D) primary disturbance is high, while subharmonic resonance prevails in an environment with a low primary disturbance. At a high supersonic Mach number of 4.5, the secondary instability of the second-mode primary is stronger than that of the first-mode primary. Further, the subharmonic and the combination resonance modes, which are slightly detuned from the subharmonic, are the dominant instabilities. The influence of the propagation direction of the primary disturbance on secondary instabilities is investigated at Mach 1.6. Whereas the fundamental and the subharmonic disturbances propagate synchronously with a 2-D primary wave, this is not true for an oblique primary. A subset of the secondary instability results is verified against direct numerical simulations. Some comparisons between spatial and temporal secondary instabilities have been made at Mach 1.6.

Ng, Lian L.↗
NASA NTRS1993

A comparison of telescopic and Phobos-2 ISM spectra of Mars in the short-wave near-infrared (0.76-1.02 microns)

Recent analyses of near-IR (0.76-3.16 microns) Mars surface reflectance spectra obtained by the Phobos-2 ISM instrument during early 1989 have revealed the presence of substantial variability in surface spectral properties. Strong absorption features seen in the 0.85-1.05 micron region are up to 10-15 percent deep relative to the local continuum and have been interpreted as evidence of Fe(2+) and Fe(3+) bearing minerals (pyroxenes and iron oxides, respectively). Though these observed band depths are comparable to those seen in laboratory reflectance spectra, they are up to three times larger than most previously reported band depths for Mars spectra at these wavelengths. Six regions of variable albedo and geologic setting were identified where ISM and 1988 opposition telescopic coverage either overlapped physically or sampled the same surface geologic unit. The areal sizes and positions of the regions measured telescopically were compiled by Bell et al. ISM pixels falling within these spots were averaged to produce a spatially convolved spectrum that simulates what would have been seen telescopically. To facilitate comparisons of absorption band positions and relative strengths, the convolved ISM data and the 1988 telescopic spectra were scaled to unity at 0.81 microns and are presented. The data have also been convolved to equivalent band pass normalized reflectances in the region of spectral overlap. A scatter diagram of telescopic vs. ISM reflectances is shown. The results from the investigation are discussed.

Bell, James F., III↗
NASA NTRS2001

Assimilation of GOES Land Surface Data into a Mesoscale Models

A technique has been developed for assimilating Geostationary Operational Environmental Satellite (GOES)-derived skin temperature tendencies and insolation into the surface energy budget equation of a mesoscale model so that the simulated rate of temperature change closely agrees with the satellite observations. A critical assumption of the technique is that the availability of moisture (either from the soil or vegetation) is the least known term in the model's surface energy budget. Therefore, the simulated latent heat flux, which is a function of surface moisture availability, is adjusted based upon differences between the modeled and satellite-observed skin temperature tendencies. An advantage of this technique is that satellite temperature tendencies are assimilated in an energetically consistent manner that avoids energy imbalances and surface stability problems that arise from direct assimilation of surface shelter temperatures. The fact that the rate of change of the satellite skin temperature is used rather than the absolute temperature means that sensor calibration is not as critical. The assimilation technique has been applied to the Oklahoma-Kansas region during the spring-summer 2000 time period when dynamic changes in vegetation cover occur. In April, central Oklahoma is characterized by large NDVI associated with winter wheat while surrounding areas are primarily rangeland with lower NDVI. In July the vegetation pattern reverses as the central wheat area changes to low NDVI due to harvesting and the surrounding rangeland is greener than it was in April. The goal of this study is to determine if assimilating satellite land surface data can improve simulation of the complex spatial distribution of surface energy and water fluxes across this region. The PSU/NCAR NM5 V3 system is used in this study. The grid configuration consists of a 36-km CONUS domain and a 12-km nest over the area of interest. Bulk verification statistics (BIAS and RMSE) of surface air temperature and dewpoint indicates that assimilation of the satellite data results reduces both the bias and RMSE for both state variables. In addition, comparison of model data with ARM/CART EBBR flux observations reveals that the assimilation technique adjusts the bowen ratio in a realistic fashion.

Lapenta, William M.↗
NASA NTRS2005

Impact of Fluidic Chevrons on Jet Noise

The impact of alternating fluidic core chevrons on the production of jet noise is investigated. Core nozzles for a representative 1/9th scale, bypass ratio 5 model system were manufactured with slots cut near the trailing edges to allow for air injection into the core and fan streams. The injectors followed an alternating pattern around the nozzle perimeter so that the injection alternated between injection into the core stream and injection into the fan stream. For the takeoff condition and a forward flight Mach number of 0.10, the overall sound pressure levels at the peak jet noise angle decrease with increasing injection pressure. Sound pressure levels increase for observation angles less than 110o at higher injection pressures due to increases in high frequency noise. Greater increases in high frequency noise are observed when the number of injectors increases from 8 to 12. When the forward flight Mach number is increased to 0.28, jet noise reduction (relative to the baseline) is observed at aft angles for increasing injection pressure while significant increases in jet noise are observed at forward observation angles due to substantial acoustic radiation at high frequencies. A comparison between inflow and alternating injectors shows that, for equal mass injection rates, the inflow nozzle produces greater low frequency noise reduction (relative to the baseline) than the alternating injectors at 90o and aft observation angles and a forward flight Mach number of 0.28. Preliminary computational fluid dynamic simulations indicate that the spatial decay rate of the hot potential core flow is less for the inflow nozzle than for the alternating nozzles which indicates that gentle mixing may be preferred over sever mixing when fluidic chevrons are used for jet noise reduction.

Henderson, Brenda S.↗