Search NASA⌕ Search

SEARCH · Search NASA

Results for “Specific conductance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evolution of magnetic field induced ordering in the layered quantum Heisenberg triangular-lattice antiferromagnet Ba 3 CoSb 2 O 9

Quantum fluctuations in the effective spin-12 layered triangular-lattice quantum Heisenberg antiferromagnet Ba 3 CoSb 2 O 9 lift the classical degeneracy of the antiferromagnetic ground state in magnetic field, producing a series of novel spin structures for magnetic fields applied within the crystallographic ab plane, including a celebrated collinear “up-up-down” spin ordering with magnetization equal to 1/3 of the saturation magnetization over an extended field range. Theoretically unresolved, however, are the effects of interlayer antiferromagnetic coupling and transverse magnetic fields on the ground states of this system. Additional magnetic field induced phase transitions are theoretically expected and in some cases have been experimentally observed, but details regarding their number, location, and physical character appear inconsistent with the predictions of existing models. Conversely, an absence of experimental measurements as a function of magnetic-field orientation has left other key predictions of these models untested. To address these issues, in this study we have used specific heat, neutron diffraction, thermal conductivity, and magnetic torque measurements to map out the phase diagram as a function of magnetic field intensity and orientation relative to the crystallographic ab plane. For H||ab, we have discovered an additional magnetic field induced phase transition at low temperature and an unexpected tetracritical point in the high-field phase diagram, which coupled with the apparent second-order nature of the phase transitions eliminates several theoretically proposed spin structures for the high-field phases. Our calorimetric measurements as a function of magnetic field orientation are in general agreement with theory for field-orientation angles close to plane parallel (H||a) but diverge at angles near plane perpendicular; a predicted convergence of two phase boundaries at finite angle and a corresponding change in the order of the field induced phase transition are not observed experimentally. Our results emphasize the role of interlayer coupling in selecting and stabilizing field induced phases, provide guidance on the nature of the magnetic order in each phase, and reveal the need for new physics to account for the nature of magnetic ordering in this archetypal two-dimensional spin-12 triangular-lattice quantum Heisenberg antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Exotic physical properties in metallic perovskite LaRuO 3 : Strong evidence for Hund metal

The Hund's coupling rule is of fundamental importance in atomic physics. It also plays a key role in the determination of physical properties in strongly correlated electron systems where the Fermi energy lies in multiple bands. Here we report a thorough investigation of a rarely studied 4d perovskite oxide LaRuO 3 by a suite of measurements including transport, magnetization, specific heat, thermoelectric power, thermal conductivity, and neutron and x-ray diffraction. Our results are consistent with theoretical predictions, which makes LaRuO 3 an exemplary Hund metal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Sociodemographic effects on pandemic fatigue are multifaceted and context-specific: A longitudinal analysis of physical distancing adherence

Pandemic fatigue emerged early during the COVID-19 pandemic and remains a concern as new variants emerge and ongoing public health measures are needed to control them. A wide range of factors can affect pandemic fatigue, but empiric research indicating which may be most important to adherence in specific populations is lacking. We conducted a longitudinal study of changes in physical distancing in two cohorts: adults living with children <18 years and adults ≥50 years old. Six types of non-work, non-household contacts were ascertained at six times from April to October 2020. We used generalized estimating equations Poisson regression to estimate the one-week change in contact rate and how this differed based on sociodemographic characteristics. The rate of all contact types increased during the middle of the study period and decreased toward the end. Changes in contact rates over time differed according to several sociodemographic characteristics, including age, gender, race/ethnicity, education, household composition, and access to transportation. Furthermore, the factors influencing the rate of change in contact rates differed by the type or setting of the contact, for example contacts as a result of visiting another person’s home versus during a retail outing. These results provide evidence for potential mechanisms by which pandemic fatigue has resulted in lower physical distancing adherence.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Geospatial analysis of preterm and small-for-gestational age births in Washington D.C.

Background: This study is based on the recognition that adverse pregnancy outcomes significantly affect maternal and infant health, leading to increased morbidity and mortality. These outcomes are shaped by a complex interplay of individual-level factors—like maternal age and education—and community-level influences, including socio-economic status and access to healthcare. Understanding these determinants is crucial for developing effective public health strategies, especially for marginalized populations, by identifying high-risk areas and informing targeted interventions that address both individual and structural barriers. Methods: We utilized geospatial analysis to explore the association between individual- and community-level factors and adverse pregnancy outcomes, specifically preterm birth (PTB) and small-for-gestational-age (SGA) birthweight in Washington, D.C. We used Empirical Bayes smoothing methods to calculate rates of adverse birth outcomes from 2010 to 2018 at the U.S. Census tract–level. Spatial scan statistics were used to investigate if adverse birth outcomes clustered in specific areas. ANOVA tests were conducted for individual- and community-level factors within identified clusters. Results: Spatial analysis identified significant high-risk clusters for PTB and SGA infants primarily in southeastern Washington, D.C., particularly in Wards 7 and 8. Individuals residing within these clusters experienced a 47% increased risk of PTB (RR = 1.467) and a 56% increased risk of SGA (RR = 1.560) compared to those outside clusters. Space–time analysis revealed temporal variation, with PTB clusters persisting from 2011 to 2014 and SGA clusters extending through 2017. Compared to low-risk clusters, high-risk clusters had younger birthing individuals (mean age ~26.5 vs. ~33 years), lower maternal college degree attainment (~20% vs. ~80%), higher rates of late or no prenatal care (~16% vs. 11%), and increased prevalence of smoking and hypertension (all P < 0.001). Community-level indicators showed lower median household incomes ($\$40,000$ vs. ~$\$105,000$), greater poverty (~16% vs. ~7% below $\$10,000$/year), higher public assistance use (~32% vs. ~5%), and reduced healthcare access (greater distances to emergency and specialty care) in high-risk areas (all P < 0.001). Neighborhood deprivation indices were significantly elevated, commutes were longer, and population density was lower in these clusters. These findings highlight that adverse birth outcomes cluster in neighborhoods with pronounced socioeconomic and health disparities. Conclusion: High-risk birth clusters highlight intertwined factors: individual, socio-economic, and geographic. Addressing these requires comprehensive interventions focusing on social and structural determinants of health.

Birth outcomes↗
DOE OSTI2021

Holo-omics for deciphering plant-microbiome interactions

Host-microbiome interactions are recognized for their importance to host health. An improved understanding of the molecular underpinnings of host-microbiome relationships will advance our capacity to accurately predict host fitness and manipulate interaction outcomes. Within the plant microbiome research field, unlocking the functional relationships between plants and their microbial partners is the next step to effectively using the microbiome to improve plant fitness. We propose that strategies that pair host and microbial datasets—referred to here as holo-omics—provide a powerful approach for hypothesis development and advancement in this area. We discuss several experimental design considerations and present a case study to highlight the potential for holo-omics to generate a more holistic perspective of molecular networks within the plant microbiome system. In addition, we discuss the biggest challenges for conducting holo-omics studies; specifically, the lack of vetted analytical frameworks, publicly available tools, and required technical expertise to process and integrate heterogeneous data. Finally, we conclude with a perspective on appropriate use-cases for holo-omics studies, the need for downstream validation, and new experimental techniques that hold promise for the plant microbiome research field. We argue that utilizing a holo-omics approach to characterize host-microbiome interactions can provide important opportunities for broadening system-level understandings and significantly inform microbial approaches to improving host health and fitness.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Resource for the Development of Biomedical Accelerator Mass Spectrometry (AMS) Final Report

The NIH Research Resource for Biomedical AMS was originally funded at Lawrence Livermore National Laboratory in 1999 to develop and apply the technology of accelerator mass spectrometry (AMS) in broad- based biomedical research. The Resource’s niche is to fill needs for ultra high sensitivity quantitation when isotope-labeled agents are used. The Research Resource’s Technology Research and Development (TR&D) efforts will focus on the needs of the biomedical research community in the context of seven Driving Biomedical Projects (DBPs) that will drive the Center’s technical capabilities through three core TR&Ds. We will expand our present capabilities by developing a fully integrated HPLC AMS to increase our capabilities for metabolic measurements, we will develop methods to understand cellular processes and we will develop and validate methods for the application of AMS in human studies, which is a growing area of demand by collaborators and service users. In addition, we will continue to support new and ongoing collaborative and service projects that require the capabilities of the Resource. The Center will continue to train researchers in the use of the AMS capabilities being developed, and the results of all efforts will be widely disseminated to advance progress in biomedical research. Towards these goals, our specific aims are to:1.) Increase the value and information content of AMS measurements by combining molecular speciation with quantitation of defined macromolecular isolates. Specifically, develop and validate methods for macromolecule labeling, characterization and quantitation.2.) Develop and validate methods and strategies to enable AMS to become more broadly used in human studies. Specifically, demonstrate robust methods for conducting pharmacokinetic/pharmacodynamics studies in humans and model systems.3.) Increase the accessibility of AMS to the Biomedical research community and the throughput of AMS through direct coupling to separatory instruments.4.) Provide high throughput 14C BioAMS analysis for collaborative and service clients.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

International Collaboration Activities in Geologic Disposal Research: FY2021 Progress

This report describes the FY21 status of international collaboration regarding geologic disposal research in the Spent Fuel and Waste Disposition (SFWD) Campaign. Since 2012, in an effort coordinated by Lawrence Berkeley National Laboratory, SFWD has advanced active collaboration with several international geologic disposal programs across the world. Such collaboration has allowed the SFWD Campaign to benefit from a deep knowledge base in regards to alternative repository environments developed over decades and has provided a framework for active peer-to-peer research participation in international groups which conduct, analyze, and model performance-relevant processes. Via international collaboration, the SFWD Campaign also benefits from substantial international investments in research facilities (such as underground research laboratory testing and modeling) and achieves cost savings via joint funding of expensive field experiments. To date, SFWD’s International Disposal R&D Program has established formal collaboration agreements with multiple international initiatives and various international partners, and national lab scientists associated with SFWD have conducted a large number of specific collaborative R&D activities that align well with its R&D priorities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Semiconductor Nanostructures by Scientific Design (Final Technical Report)

We developed and used quantum simulation techniques to predict structural, electronic, optical and thermal properties affecting the scientific design of semiconductor nanostructures. We focused on the study of surfaces and interfaces at the nanoscale, in particular embedding and solvation of semiconductor nanoparticles, and provided a microscopic description of nanostructured materials in realistic environments, directly comparable with experimental conditions. We addressed three major problems: (i) the design of realistic structural models of integrated nanostructures, e.g. quantum dots embedded in solid matrices and nanostructures immersed in fluids; (ii) the development of efficient and accurate calculations to describe the excited state properties of nanostructures, beyond standard Density Functional Theory, so as to understand and predict electronic properties involved in renewable energy applications, for example solar conversion devices. In particular we developed and used methods based on a many body perturbation theory. (iii) the development of calculations of heat transport properties of nanostructured materials, for thermoelectric applications, including predictive calculations of thermal and electrical conductivity and of Seebeck coefficients. Specifically, we developed and used methods based on the Boltzmann transport equation and molecular dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Best Practices in Electricity Load Modeling and Forecasting for Long-Term Power System Planning

This document highlights the best practices on data acquisition and management, modeling and stakeholder engagement required for enhanced load modeling and forecasting. Each section is interspersed with case studies to highlight lessons from different country contexts to highlight both cross-cutting and location specific best practices needed to conduct robust load modeling and forecasting.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Uncertainty Quantification of Monolithic Tungsten Target Block Fatigue

The current STS spallation target design consists of 21 water cooled, tantalum clad, monolithic tungsten blocks. The target wheel assembly rotates such that each target block receives a direct proton pulse every 1.4 seconds (21 blocks / 15 Hz pulses). The quasi-steady heating induced by the repetitive beam pulses creates a significant mean stress distribution in the target. On top of this, the rapid energy deposition from a proton pulse induces dynamic stress waves that are of the same order of magnitude as the mean stresses. Over the design goal of 5,000 operational hours per year for a decade, each target must withstand over 130 million repetitions of these dynamic stress events. The fatigue life prediction of the target blocks is a complex sequence of simulations that depend upon a set of input parameters. For the tungsten block, the end goal is the fatigue factor-of-safety (FOS). This study documents a new structural analysis routine using software available to U.S. national laboratories (e.g. CUBIT, Sierra Multiphysics, Dakota) that enables more rapid target fatigue analysis. The increased throughput is amenable to parameter sensitivity and uncertainty quantification (UQ) studies. A set of input parameters (ultimate strength, fatigue strength, density, elastic modulus, Poisson’s ratio, thermal conductivity, coefficient of thermal expansion, specific heat, flow rate) with expected ranges are documented based on literature data, recent experimental testing, and engineering judgement. UQ bounds the resulting fatigue FOS at [0.5, 3.4] using epistemic interval analysis. These bounds are expected to be wider due to model effects (discretization) and beam effects (focus, offset) that were not included. Parameter sensitivity underscores the importance of ultimate strength and fatigue strength of irradiated tungsten on the fatigue calculations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Summary of the Brine Availability Test in Salt (BATS), Including Extended Plan for Experiments at the Waste Isolation Pilot Plant (WIPP)

This document lays out a set of near-future investigations in salt, the third phase of BATS (BATS 3). This phase is planned to answer the few remaining issues from the first two phases of BATS (BATS 1 and BATS 2), and to prepare for a subsequent large-scale demonstration phase. The BATS experiments are the first part of a larger plan to conduct field experiments to answer specific technical questions, improve the technical basis for disposal of heat-generating radioactive waste in salt (Stauffer et al., 2015; SNL et al., 2020), and demonstrate readiness for disposal of radioactive waste in salt, including large, hot waste packages.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Compositional Variation Tests on DuraMelter 100 with LAW Sub-Envelope C1 Feed (LAWC22) Glass in Support of the LAW Pilot Melter (Final Report)

The Vitreous State Laboratory at The Catholic University of America (VSL) is developing and testing glass formulations for RPP-WTP waste envelopes to provide data to meet the RPP-WTP contract requirements and to support system design activities. That work is based upon small-scale batch melts (“crucible melts”) using waste envelope simulants. Selected formulations have also been tested in small-scale continuously-fed joule-heated melters (DM10 and DM100 systems) and, ultimately, in the LAW Pilot Melter. Such melter tests provide information on key process factors such as feed processing behavior, dynamic effects during processing, sulfate incorporation, processing rates, off-gas amounts and compositions, foaming control, etc., that cannot be reliably obtained from crucible melts. This sequential scale-up approach in the vitrification testing program ensures that maximum benefit is obtained from the more costly pilot-scale tests and that the most effective use is made of that resource. The principal objective of the work described in this report was to collect the necessary small-scale melter test data with a LAW Sub-Envelope C1 waste simulant in order to support the next series of tests with the same melter feed on the LAW Pilot Melter. This work was conducted under a corresponding Test Specification and Test Plan.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

DEMO-FTES: Development, Monitoring, and Control of Fracture Thermal Energy Storage in Crystalline Rock Formations (CRADA Final Report)

The DEMO-FTES project investigated the feasibility of Fracture Thermal Energy Storage (FTES) as a seasonal energy storage solution in crystalline rock formations. FTES leverages hydraulically induced fractures to exchange heat between circulating fluids and the surrounding rock mass, enabling long-term thermal energy retention due to the high specific heat and low thermal conductivity of rock. This approach has the potential to reduce heating and cooling energy demands and enhance building energy resilience. The project combined dimensional analysis, numerical modeling, laboratory experiments, and meso-scale field tests to evaluate FTES performance and advance its technology readiness level from 3 to 5. Scaling analysis identified key dimensionless parameters governing heat transfer and fluid flow, ensuring laboratory and field tests were representative of larger-scale systems. Numerical simulations using TOUGH and iTOUGH2 frameworks supported experiment design and interpretation, modeling fracture geometry, thermal-hydraulic behavior, and thermo-mechanical coupling. Laboratory tests at EPFL involved creating single and multiple fractures in 25 cm cubic samples of Gabbro and Granite under true triaxial stress.

25 ENERGY STORAGE↗
DOE OSTI2025

Vertically Aligned Carbon Nanotubes Grown on Copper Foil as Electrodes for Electrochemical Double Layer Capacitors

This study reports a binder-free, catalyst-free method for fabricating vertically aligned carbon nanotubes (VACNTs) directly on copper (Cu) foil using plasma-enhanced chemical vapor deposition (PECVD) for electrochemical double-layer capacitor (EDLC) applications. This approach eliminates the need for catalyst layers, polymeric binders, or substrate pre-treatments, simplifying electrode design and enhancing electrical integration. The resulting VACNTs form a dense, uniform, and porous array with strong adhesion to the Cu substrate, minimizing contact resistance and improving conductivity. Electrochemical analysis shows gravimetric specific capacitance (C grav ) and areal specific capacitance (C areal ) of 8 F g −1 and 3.5 mF cm −2 at a scan rate of 5 mV/s, with low equivalent series resistance (3.70 Ω) and charge transfer resistance (0.48 Ω), enabling efficient electron transport and rapid ion diffusion. The electrode demonstrates excellent rate capability and retains 92% of its initial specific capacitance after 3000 charge–discharge cycles, indicating strong cycling stability. These results demonstrate the potential of directly grown VACNT-based electrodes for high-performance EDLCs, particularly in applications requiring rapid charge–discharge cycles and sustained energy delivery.

25 ENERGY STORAGE↗
DOE OSTI2020

An inverse vulcanized conductive polymer for Li–S battery cathodes

Polymers with a broad range of properties, structural diversity, and mechanical flexibility have been adopted in all aspects of Li–S batteries. However, currently explored polymers for Li–S cathodes suffer from low conductivity, low S content, and poor cycling performance. In this first-principles study, we theoretically design a new polymer, poly(2-vinyl,1,4-phenylene sulfide), by modifying the conductive poly(1,4-phenylene sulfide) via the vinyl group to enhance its ability to vulcanize with element S. Furthermore, we compare the properties of the experimentally realized sulfur vulcanized polymers via condensation and our designed sulfur vulcanized polymers via crosslinking as Li–S battery cathodes, in terms of gravimetric and specific capacities, as well as structural stability during the lithiation. Overall, we find that our designed polymer possesses better conductivity, higher specific capacity and gravimetric energy density, and better kinetic stability, and restricts the shuttle effect more efficiently than the current experimentally explored one. Also, the cross-linked sulfur compounds can be activated efficiently due to the short transport lengths rather than dissolution in the electrolyte during battery operation. Therefore, we believe our designed polymer cathode is promising for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Reversible Iron Oxyfluoride (FeOF)–Graphene Composites as Sustainable Cathodes for High Energy Density Lithium Batteries

Two large barriers are impeding the wide implementation of electric vehicles, namely driving-range and cost, primarily due to the low specific energy and high cost of mono-valence cathodes used in lithium-ion batteries. Iron is the ideal element for cathode materials considering its abundance, low cost and toxicity. However, the poor reversibility of (de)lithiation and low electronic conductivity prevent iron-based high specific energy multi-valence conversion cathodes from practical applications. In this work, a sustainable FeOF nanocomposite is developed with extraordinary performance. The specific capacity and energy reach 621 mAh g –1 and 1124 Wh kg –1 with more than 100 cycles, which triples the specific capacity, and doubles the specific energy of current mono-valence intercalation LiCoO 2 . This is the result of an effective approach, combing the nanostructured FeOF with graphene, realized by making the (de)lithiation reversible by immobilizing FeOF nanoparticles and the discharge products over the graphene surface and providing the interparticle electric conduction. Importantly, it demonstrates that introducing small amount of graphene can create new materials with desired properties, opening a new avenue for altering the (de)lithiation process. Finally, such extraordinary performance represents a significant breakthrough in developing sustainable conversion materials, eventually overcoming the driving range and cost barriers.

25 ENERGY STORAGE↗
DOE OSTI2021

Planting miscanthus instead of row crops may increase the productivity and economic performance of farmed potholes

Abstract Climate change projections indicate that precipitation events in the central United States are expected to become more intense, more frequent in the spring, and less frequent in the summer. Such a precipitation shift could adversely impact crop yields, especially in subfield areas known as farmed potholes, which are highly susceptible to flooding and ponding, and crop death is more likely to occur, particularly early in the growing season. This suggests that planting alternative crops, such as more flood tolerant perennials, in these areas may be a more profitable option. Using observations of crop growth and yield along with ponding depth of a specific field and farmed pothole in the central United States, we developed a spatially explicit version of the agroecosystem model Agro‐IBIS to estimate water depth and crop yield. After evaluating the model, we conducted a case study for a specific farmed pothole with a range of future precipitation scenarios with Agro‐IBIS to simulate the effects of contemporary (2002–2016) and future precipitation on a conventional corn/soybean ( Zea mays L. and Glycine max Merr.) rotation and an alternative perennial miscanthus ( Miscanthus × giganteus Greef et Deu.) cropping system. The depth and frequency of ponding increased under most future precipitation scenarios. The corn/soybean rotation had greater total loss (i.e., no yield) on average (>30%) for all scenarios in comparison to miscanthus (<10%). Under one future precipitation scenario with increased spring precipitation, both the corn/soybean rotation and miscanthus simulations showed an increase in yield. A simple budget analysis indicated that it is more profitable to plant miscanthus instead of corn or soybeans where yields in farmed potholes are consistently poor. Our findings show that potholes can be individually modeled, and their influence on yield can be quantified for use in future management decisions dictated by change in climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

N-Doped Graphene (N-G)/MOF(ZIF-8)-Based/Derived Materials for Electrochemical Energy Applications: Synthesis, Characteristics, and Functionality

In recent years, graphene-type materials originating from metal–organic frameworks (MOFs) or integrated with MOFs have exhibited notable performances across various applications. However, a comprehensive understanding of these complex materials and their functionalities remains obscure. While some studies have reviewed graphene/MOF composites from different perspectives, due to their structural–functional intricacies, it is crucial to conduct more in-depth reviews focusing on specific sets of graphene/MOF composites designed for particular applications. In this review, we thoroughly investigate the syntheses, characteristics, and performances of N-G/MOF(ZIF-8)-based/derived materials employed in electrochemical energy conversion and storage systems. Special attention is given to realizing their fundamental functionalities. The discussions are divided into three segments based on the application of N-G/ZIF-8-based/derived materials as electrode materials for batteries, electrodes for electrochemical capacitors, and electrocatalysts. As electrodes for batteries, N-G/MOF(ZIF-8) materials can mitigate issues like an electrode volume expansion for Li-ion batteries and the ‘shuttle effect’ for Li-S batteries. As electrodes for electrochemical capacitors, these materials can considerably improve the ion transfer rate and electronic conductivity, thereby enhancing the specific capacitance while maintaining the structural stability. Also, it was observed that these materials could occasionally outperform standard platinum-based catalysts for the electrochemical oxygen reduction reaction (ORR). The reported electrochemical performances and structural parameters of these materials were carefully tabulated in uniform units and scales. Through a critical analysis of the present synthesis trends, characteristics, and functionalities of these materials, specific aspects were identified that required further exploration to fully utilize their inherent capabilities.

Electrochemistry↗