Search NASA⌕ Search

SEARCH · Search NASA

Results for “Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Equations of motion of a constrained split fairing system during opening.

Description of a constrained split fairing technique for avoiding contamination of a sounding rocket's payload environment by an uncontained explosive actuation device. The development is presented of the equations of motion of the fairing halves during the opening sequence assumed to occur above the sensible atmosphere. It is believed that a significant insight into the general motion results from the solution obtained.

Saunders, R. C., Jr.↗
NASA NTRS1971

Improved ITOS attitude control system with Hall generator brushless motor and earth-splitting technique

The ITOS with an improved attitude control system is described. A Hall generator brushless dc torque motor will replace the brush dc torque motor on ITOS-I and ITOS-A (NOAA-1). The four attitude horizon sensors will be replaced with two CO2 sensors for better horizon definition. An earth horizon splitting technique will be used to keep the earth facing side of the satellite toward earth even if the desired circular orbit is not achieved. The external appearance of the pitch control subsystem differs from TIROS-M (ITOS-1) and ITOS-A (NOAA-1) in that two instead of one pitch control electronics (PCE) boxes are used. Two instead of four horizon sensors will be used and one instead of two mirrors will be used for sensor scanning. The brushless motor will eliminate the requirement for brushes, strain gages and the telemetry for the brush wear. A single rotating flywheel, supported by a single bearing provides the gyroscopic stability and the required momentum interchange to keep one side of the satellite facing the earth. Magnetic torquing against the earth's magnetic field eliminates the requirement for expendable propellants which would limit satellite life in orbit.

Peacock, W. M.↗
NASA NTRS1973

An evlauation of the three-dimensional split-film anemometer for measurements of atmospheric turbulence

A three-dimensional split-film anemometer was tested in turbulent, as well as in nonturbulent flow downstream from a wind tunnel turbulence grid. The data obtained with this probe in the turbulence behind the grid, indicated that the measured turbulence intensities were somewhat lower than the intensity measured with the conventional hot-wire anemometry; a result of the finite dimensions of the sensor arrays. The probe yaw angle was determined to be accurate within three degrees. Statistical averages, determined by mean-wind direction and vertical and lateral directions were computed on the basis of the probe yaw angle.

Tieleman, H. W.↗
NASA NTRS1952

Investigations of Air-Cooled Turbine Rotors for Turbojet Engines. 1: Experimental Disk Temperature Distribution in Modified J33 Split-Disk Rotor at Speeds up to 6000 RPM

An experimental investigation is being conducted at the Lewis laboratory to establish general principles for the design of noncritical turbine rotor configurations. This investigation includes evaluation of cooling effectiveness, structural stability, cooling-air flow distribution characteristics, and methods of supplying cooling air to the turbine rotor blades. Prior to design of a noncritical rotor, a standard turbine rotor of a commerical turbojet engine was split in the plane of rotation and machined to provide a passage for distributing cooling air to the base of each blade. The rotor was fitted with nontwisted, hollow, aircooled blades containing nine tubes in the coolant passage. In the investigation reported herein, the modified turbine rotor operated successfully up to speeds of 6000 rpm with ratios of cooling-air to combustion-gas flow as low as 0.02. The disk temperatures observed at these conditions were below 450 0 F when cooling air at 100 F was used from the laboratory air system. The calculated disk temperatures based on the correlation method presented for rated engine conditions were well below 1000 F at a cooling-air flow ratio of 0.02, which is considered adequate for a noncritical rotor. An appreciable difference in temperature level existed between the forward and rear disks. This temperature difference probably introduced undesirable disk stress distributions as a result of the relative elongations of the two disks. This investigation was terminated at 6000 rpm so that slight changes in the engine configuration could be made to relieve this condition.

Schramm, Wilson B.↗
NASA NTRS1973

Time-split finite-volume method for three-dimensional blunt-body flow

An efficient numerical method for calculating plane, axisymmetric, and fully three-dimensional blunt-body flow is presented. It is a second-order-accurate, time-dependent finite-volume procedure that solves the Euler equations in integral conservation-law form. These equations are written with respect to a Cartesian coordinate system in which an embedded mesh adjusts in time to the motion of the bow shock that is automatically captured as part of the weak solution. With such an adjusting mesh, oscillations in flow properties near the shock are shown to be virtually eliminated. The scheme uses a time-splitting concept that accelerates the convergence appreciably. Comparisons are made between computed and experimental results.

Rizzi, A. W.↗
NASA NTRS1975

Ispra Mark-10 water splitting process

A thermochemical water splitting process, the Ispra Mark-10 chemical reaction cycle, was chosen for examining the possibility of using water to produce hydrogen on a large scale for fuel and major industrial chemical uses. The assumed energy source for the process is an HTGR (helium cooled). A process flow diagram, a material balance, and an energy balance were developed for the thermochemical reaction cycle. Principal reactions which constitute the cycle are included.

Source record↗
NASA NTRS1976

Free-vibration characteristics of a large split-blanket solar array in a 1-g field

Two methods for studying the free vibration characteristics of a large split blanket solar array in both a 0-g and a 1-g cantilevered configuration are presented. The 0-g configuration corresponds to an in-orbit configuration of the array; the 1-g configuration is a typical ground test configuration. The first method applies the equations of continuum mechanics to determine the mode shapes and frequencies of the array; the second method uses the Rayleigh-Ritz approach. In the Rayleigh-Ritz method the array displacements are represented by string modes and cantilevered beam modes. The results of this investigation are summarized by a series of graphs illustrating the effects of various array parameters on the mode shapes and frequencies of the system. The results of the two methods are also compared in tabular form.

Shaker, F. J.↗
NASA NTRS1978

A split band-Cholesky equation solving strategy for finite element analysis of transient field problems

The paper describes the split-Cholesky strategy for banded matrices arising from the large systems of equations in certain fluid mechanics problems. The basic idea is that for a banded matrix the computation can be carried out in pieces, with only a small portion of the matrix residing in core. Mesh considerations are discussed by demonstrating the manner in which the assembly of finite element equations proceeds for linear trial functions on a triangular mesh. The FORTRAN code which implements the out-of-core decomposition strategy for banded symmetric positive definite matrices (mass matrices) of a coupled initial value problem is given.

Cooke, C. H.↗
NASA NTRS1972

ISODATA: Thresholds for splitting clusters

The author has identified the following significant results. The parameter AD (average distance) as used in the ISODATA program was critically examined. Thresholds of AD to decide on the splitting of clusters were obtained. For the univariate case, 0.84 was established as a sound choice, after examining several simple, as well as composite, distributions and also after investigating the probability of misclassification when points have to be reassigned to the newly identified clusters. For the multivariate case, the empirical threshold (N-0.16)/square root of N was extrapolated. A final criticism on AD was that AD would lose its effectiveness as a discriminative measure for the present purpose when N was large.

Kan, E. P. F.↗
NASA NTRS1979

The split comets - Gravitational interaction between the fragments

The gravitational interaction between two fragments of a split comet nucleus in the sun's gravitational field is studied by means of the n-body computer program of Schubart and Stumpff (1966). Patterns of interactions are found for combinations of the masses, mass ratios and densities of the parent nucleus and the fragment, directions of separation, and regions of separation for nucleus separations occurring at perihelion and at true anomalies of +90 deg and -90 deg. It has been found that solar gravitational effects become noticeable about 0.5 to 1 day after separation at perihelion, and about 1 to 2 days after separation at twice the perihelion distance. Mass ratios and bulk density do not appreciably affect the appearance of the calculated trajectories. The calculated patterns vary from zero to very high inclinations, from a prograde to a retrograde sense of motion, and from escape of the companion to its pursuance of periodic quasi-stable orbits around the principal nucleus, terminated in some cases by collision of the fragments.

Sekanina, Z.↗
NASA NTRS1979

Split-film anemometer measurements on an airfoil with turbulent separated flow

Experimental studies of turbulent separation on airfoils have been conducted to aid in improving theoretical models of post-stall airfoil behavior. The studies utilize a variety of pressure and hot-film probes. The split-film anemometer has proved particularly valuable for measurement of highly turbulent reversing flows. Suggested techniques for on-line digital computer processing of the data are discussed.

Wentz, W. H., Jr.↗
NASA NTRS1979

A split sphere 60,000 ton press

A split sphere press which can have a total force of 60,000 tons applied to its exterior by a 0.55 GPa hydrostatic pressure vessel is described. The inner anvils are made of tungsten carbide and show considerable plastic deformation under load. Much greater pressures, in the 100 GPa range, are possible if diamond tipped anvils are used. Because of the uniformly loaded multi-anvil arrangement, the diamond tips can be maintained under a high degree of compressive load and therefore prevent fracture which may occur in a conventional opposed anvil arrangement. Press operation on CdS, ZnSe, ZnS, GaP, and BP samples is described, and their resistance versus external pressure on the sphere are plotted.

Wanagel, J.↗
NASA NTRS1979

Application of a velocity-split Navier-Stokes solution technique to external flow problems

A method for solving the Navier-Stokes equations based on splitting the velocity vector into its rotational and irrotational parts has recently been applied successfully to internal flow computations. In this paper, the applicability of the method to external flows is examined by studying two model problems; laminar incompressible flow over semiinfinite and finite flat plates. For these problems the procedure accurately reproduces the known solutions and is computationally very efficient even at high Reynolds numbers. Computational aspects of the method are discussed along with the possibility of using the procedure to retrofit a viscous capability into existing transonic potential flow codes.

Dwoyer, D. L.↗
NASA NTRS1980

Velocity-split Navier-Stokes solution procedure for incompressible high Reynolds number external flows

A method for solving the Navier-Stokes equations based on splitting the velocity vector into its rotational and irrotational parts was sucessfully applied to internal flow computations. The applicability of the method to external flows is examined by studying several model problems. The model problems are those of laminar and turbulent incompressible flow past a semi-infinite flat plate and laminar incompressible flow past a finite flat plate. For these problems, the procedure accurately reproduces the known solutions and is computationally very efficient even at high Reynolds numbers. Computational aspects of the method are discussed along with the possibility of using the procedure to retrofit a viscous capability into existing potential flow codes.

Dwoyer, D. L.↗
NASA NTRS1980

Studies of thermochemical water-splitting cycles

Higher temperatures and more isothermal heat profiles of solar heat sources are developed. The metal oxide metal sulfate class of cycles were suited for solar heat sources. Electrochemical oxidation of SO2 and thermochemical reactions are presented. Electrolytic oxidation of sulfur dioxide in dilute sulfuric acid solutions were appropriate for metal oxide metal sulfate cycles. The cell voltage at workable current densities required for the oxidation of SO2 was critical to the efficient operation of any metal oxide metal sulfate cycle. A sulfur dioxide depolarized electrolysis cell for the splitting of water via optimization of the anode reaction is discussed. Sulfuric acid concentrations of 30 to 35 weight percent are preferred. Platinized platinum or smooth platinum gave the best anode kinetics at a given potential of the five materials examined.

Remick, R. J.↗
NASA NTRS1980

A simple stripline design for uneven power split

A technique for the design of stripline or microstrip power dividers for unequal, but in-phase, power split is described. The output power ratio is determined by selecting the location of the input port in a manner analogous to the tap point for an electric power transformer. The technique yields a usable bandwidth of 7 to 8 percent and is attractive for tapered amplitude distribution networks for narrow band phased arrays.

Bailey, M. C.↗