Influence of impurities on stacking fault energy determination
Stacking fault energy determination, discussing impurities influence in equilibrium dimensions distortion of extended nodes in titanium carbide
Venables, J. D.↗
SEARCH · Search NASA
Results for “Stack”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrogen Flare Stack Diffusion Flames - Low and High Flow Instabilities, Burning Rates, Dilution Limits, Temperatures, and Wind Effects
Combustion characteristics and safety factors for hydrogen diffusion flames in flare stack operations
Grumer, J.↗
Control of nitrogen dioxide in stack emission by reaction with ammonia
Control of nitrogen dioxide in stack emission by reaction with ammonia
Metzler, A. J.↗
Remote control flare stack igniter for combustible gases
Device has been designed and developed for igniting nonrecoverable combustible gases and sustaining combustion of gases evolving from various gas vent stacks. Igniter is superior to existing systems because of simplicity of operation, low cost fabrication, installation, operational and maintainability features, and excellent reliability in all phases of required operations.
Ray, W. L.↗
Control of Nitrogen Dioxide in Stack Emission by Reaction with Ammonia
The development of an acid base gas-phase reaction system which utilizes anhydrous ammonia as the reactant to remove nitrogen dioxide from hydrazine-nitrogen tetroxide rocket combustion exhaust is reported. This reaction reduced NO2 levels in exhaust emissions so that the resulting stack emission is completely white instead of the earlier observed typical reddish-brown coloration. Preliminary analyses indicate the importance of reaction time and ammonia concentration on removal efficiency and elimination of the health hazard to individuals with respiratory problems.
Metzler, A. J.↗
Porus electrode comprising a bonded stack of pieces of corrugated metal foil
An electrode suitable for use in an electrochemical cell is described. The electrode is composed of a porous conductive support with a bonded stack of pieces of thin corrugated nickel foil where the corrugations are oriented approximately perpendicular to the sides of the electrode and form an array of passages through the electrode. Active material such as cadmium hydroxide or nickel hydroxide is uniformly distributed within the passages. The support may comprise also a piece of thin flat nickel foil between adjacent pieces of the corrugated foil, forming a barrier between the passages formed on each side of it. Typically the corrugations in the odd corrugated layers are oriented at a small angle from the perpendicular in one direction and the corrugations in the even corrugated layers are oriented at a small angle from the perpendicular in the opposite direction.
Mccallum, J.↗
Observation of Raman scattering by SO2 in a generating plant stack plume.
Raman scattering by SO2 in an electrical generating plant stack plume has been observed using an optical radar system. Good qualitative agreement is evident between SO2 backscatter intensity and the plant's electrical power output.
Melfi, S. H.↗
Visualization of smoke stack plume
System consists of ultraviolet vidicon tube, interference and color filters, ultraviolet telephoto lens, monitor, and waveform analyzer to extract information from video scene, stack plume viewed against sky. System will view SO2 and any other element which absorbs light at wavelength used.
Exton, R. J.↗
A stack algorithm for source coding with a fidelity criterion
Although coding of sources with respect to a fidelity criterion was first proposed by Shannon in 1959, only recently have effective schemes been developed. Another such algorithm based on a stack is described. Like the author's other algorithms (Jelinek and Anderson, 1971, 1973), this algorithm is conceived with tree codes in mind. It has various strengths and weaknesses relative to the earlier two, which are explored. By itself, the algorithm has an interesting mathematical analysis that yields insight into the faster-than-exponential behavior of tree variables and provides a new characterization of the rate-distortion function.
Anderson, J. B.↗
Determination of stack plume properties from satellite imagery
LANDSAT imagery data were analyzed to determine the quantitative properties of a stack plume emitted from a moderate-sized pulp mill. Overlapping, consecutive-day MSS data provided plume/no plume radiances upwelling from the area of interest. These values from both the plume and its shadow were used to evaluate plume radius, height, particle concentration and scattering function, and total particle loading. Imagery data from a 10 by 10 km region in the vicinity of the mill were normalized to correct for minor atmospheric, solar and viewing angle changes for the two observation days, and cloud shadow data were used to evaluate sky radiance. The effects of the Sun angle, surface reflectance, SNR and spatial resolution are treated in the paper.
Staylor, W. F.↗
Stacked solar cells measure X-ray exposure
Stacked arrangement of solar cells and scintillating sheets in alternating layers produces very sensitive X-ray measuring device. Sensor is compatible with short exposure times typical of modern X-ray film, making it suitable for application in medical soft X-ray facilities.
Berdahl, C. M.↗
Simultaneous treatment of SO2 containing stack gases and waste water
A process for simultaneously removing sulfur dioxide from stack gases and the like and purifying waste water such as derived from domestic sewage is described. A portion of the gas stream and a portion of the waste water, the latter containing dissolved iron and having an acidic pH, are contacted in a closed loop gas-liquid scrubbing zone to effect absorption of the sulfur dioxide into the waste water. A second portion of the gas stream and a second portion of the waste water are controlled in an open loop gas-liquid scrubbing zone. The second portion of the waste water contains a lesser amount of iron than the first portion of the waste water. Contacting in the openloop scrubbing zone is sufficient to acidify the waste water which is then treated to remove solids originally present.
Poradek, J. C.↗
On the distribution of computation for sequential decoding using the stack algorithm
A method is developed for estimating the computational distribution for the stack algorithm for sequential decoding, that is, the probability that the computation required to decode the first branch of the tree is greater than or equal to N, for small N. The analysis relies heavily on the theory of multitype branching processes. A step in the analysis is the determination of the distribution of the minimum of the cumulative metrics along the transmitted path in the code tree. This is used to obtain the distribution of the number of computations made by the decoder in order to decode the first branch in the tree, and this random variable serves as an approximation of the average number of computations per decoded branch. At information rates below the cutoff rate, the calculated computational performance is virtually identical to that obtained by time-consuming simulations.
Johannesson, R.↗
Multibeam collimator uses prism stack
Optical instrument creates many divergent light beams for surveying and machine element alignment applications. Angles and refractive indices of stack of prisms are selected to divert incoming laser beam by small increments, different for each prism. Angles of emerging beams thus differ by small, precisely-controlled amounts. Instrument is nearly immune to vibration, changes in gravitational force, temperature variations, and mechanical distortion.
Minott, P. O.↗
Simultaneous stack gas scrubbing wastewater purification
Variations of a process for removing sulfur dioxide from stack gases and using it to treat municipal waste water are described. The once-through system lowers the pH of the scrubbing water from minor depressions to a pH of about 2.5 under certain conditions. A recycle system uses iron for catalytic oxidation of sulfurous acid to sulfuric acid allowing very large amounts of sulfur dioxide to be absorbed in a small portion of water. The partial recycle system uses municipal wastewater and iron as a scrubbing medium, followed by neutralization of the wastewater with lime to produce an iron hydroxide precipitation which, when removed, produces tertiary quality treated wastewater. The SO2 scrubber is described, test results are analyzed, and a preliminary capital cost estimate for the three processes is included.
Source record↗
Isotopic stack - measurement of heavy cosmic ray isotopes
Heavy cosmic ray nuclei with nuclear charge, Z, equal to or greater than 3 are to be measured using an isotopic stack consisting of passive visual track detectors which remain sensitive throughout the entire mission. The scientific data are stored in latent tracks which are produced by heavy ions and which can be revealed in the investigator's laboratory after recovery. During the mission, only housekeeping data have to be collected. The exposure onboard Spacelab 1 allows the study of the chemical composition and energy spectrum of articles which have energies in the range 20 to 100 million electron volts per atomic mass unit, as well as the isotopic composition of heavy galactic cosmic rays with energies in the range 100 to 1000 million electron volts per atomic mass unit.
Beaujean, R.↗
STGSTK: A computer code for predicting multistage axial flow compressor performance by a meanline stage stacking method
A FORTRAN computer code is presented for off-design performance prediction of axial-flow compressors. Stage and compressor performance is obtained by a stage-stacking method that uses representative velocity diagrams at rotor inlet and outlet meanline radii. The code has options for: (1) direct user input or calculation of nondimensional stage characteristics; (2) adjustment of stage characteristics for off-design speed and blade setting angle; (3) adjustment of rotor deviation angle for off-design conditions; and (4) SI or U.S. customary units. Correlations from experimental data are used to model real flow conditions. Calculations are compared with experimental data.
Steinke, R. J.↗
An evaluation of the effects of stacking sequence and thickness on the fatigue life of quasi-isotropic graphite/epoxy laminates
Notched and unnotched geometries at 16, 32, and 64-ply thicknesses of a 90/45/0-45 (ns) laminate and a 45/0/-45/90 (ns) laminate were tested in compression-compression fatigue. The fatigue life and the initiation, type, and progression of damage were determined. Interlaminar stresses generated at straight, free edges of axially loaded laminates were used to interpret the test results. The fatigue lives of the notched specimens did not appear to be a strong function of laminate stacking sequence or specimen thickness. The stress concentration at the hole dominated over the interlaminar stresses at the straight free edge. The unnotched specimens of the 90/45/0/-45 (ns) laminate with tensile interlaminar normal stresses delaminated more readily than did the 45/0/-45/90 (ns) laminate with compressive interlaminar normal stress. The life of the 16-ply unnotched specimens was lower than the 32- and 64-ply specimens. Delaminations were located at the interface where the maximum shear stress occurred regardless of the sense or magnitude of the interlaminar normal stress. An antibuckling fixture was effective in preventing out-of-plane motion without overconstraining the specimen.
Harris, C. E.↗