SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
New procedure generates boundary-conforming three-dimensional grids suitable for calculating flow fields around bodies with complex shapes. Extension of earlier methods limited to mapping two-dimensional flow regions onto rectangular grids in transformed planes. Technique also useful in solving thermodynamic and electrostatic fields near complex surfaces.
Reworking technique allows complex surfaces to be reshaped. Contours of large machined parts reworked quickly and inexpensively by electrodeposition and machining, with little risk of damage. Reworking method employs simple, reliable, well-known procedures.
While scanning Auger micrographs are used extensively for illustrating the stoichiometry of complex surfaces and for indicating areas of interest for fine point Auger spectroscopy, there are many problems in the quantification and analysis of Auger images. These problems include multiple contrast mechanisms and the lack of meaningful relationships with other Auger data. Collection of multielemental Auger images allows some new approaches to image analysis and presentation. Information about the distribution and quantity of elemental combinations at a surface are retrievable, and particular combinations of elements can be imaged, such as alloy phases. Results from the precipitate hardened alloy Al-2124 illustrate multispectral Auger imaging.
This paper describes a novel technique for measurements of the complex surface impedance Z(s) of high-T(c) superconductors over an extremely wide range of temperature, from 4.2 K and at least 200 K. The technique uses a superconducting Pb-plated Cu high-Q-cavity resonator operated at an ambient temperature of 4.2 K, with the sample (typically a 3-mm-diam x 1-mm-thick disk) mounted on a sapphire rod in the center of cavity, at a high B-field and thermally insulated from the cavity walls, making it possible to control the sample temperature externally. Since the cavity characteristics are dominated by the sample properties (the contribution of the Pb-covered walls maintained at 4.2 K is negligible), measurement of the cavity Q and resonant frequency makes it possible to measure Zs as a function of the sample temperature. The Z(s) values for bulk Y1Ba2Cu3O(y) and La(1.85)Sr(0.15)CuO4 were measured over a temperature range 4.2-100 K.
This paper presents an alternate approach for the generation of volumetric grids for supersonic and hypersonic flows about complex configurations. The method uses parametric two-dimensional block-face grid definitions, within the framework of GRIDGEN2D. The incorporation of a face decomposition reduces complex surfaces to simple shapes. These simple shapes are recombined to obtain the final face definition. The advantages of this method include the reduction of overall grid generation time through the use of vectorized computer code, the elimination of generating matching block faces, and simplified boundary conditions.
Chromatic image analysis system (CIAS) developed for use in noncontact measurements of temperatures on aerothermodynamic models in hypersonic wind tunnels. Based on concept of temperature coupled to shift in color spectrum for optical measurement. Video camera images fluorescence emitted by phosphor-coated model at two wavelengths. Temperature map of model then computed from relative brightnesses in video images of model at those wavelengths. Eliminates need for intrusive, time-consuming, contact temperature measurements by gauges, making it possible to map temperatures on complex surfaces in timely manner and at reduced cost.
Lockheed Martin Skunk Works, is taking the next step towards economical low-Earth-orbit (LEO) operations with NASA's X-33 technology demonstrator, that uses composite tanks for liquid hydrogen (LH sub2) fuel storage and structural support, The X-33 is a 53% scale model of the VentureStar single-stage-to-orbit (SSTO) reusable launch vehicle(RLV) projected to orbit payloads at a rate, of $1,000 per pound beginning in 2004 In order to make VentureStar completely reusable and economical engineers are using composite materials throughout the spacecrafts structure. The first test of the design comes in 1999 on the X-33 technology demonstrator. Two of the primary structures that engineers will be evaluating are the carbon fiber/epoxy LH2 fuel tanks. The 29-ft long by 18-ft wide tanks, which fill two-thirds of the X-33's interior, serve a dual purpose carrying fuel and providing structural support to the walls of the spacecraft. Fiber placement makes it possible to build the fuel tanks, large, light and strong enough to satisfy X33's requirements. Lockheed Martin choose the fabrication technology to produce the eight sections of each tank because of fiber placement's ability to handle complex surfaces, speed and repeatability.
Field Integrated Design and Operations (FIDO) rover is a prototype of the Mars Sample Return rovers that will carry the integrated Athena Science Payload to Mars in 2003 and 2005. The purpose of FIDO is to simulate, using Mars analog settings, the complex surface operations that will be necessary to find, characterize, obtain, cache, and return samples to the ascent vehicles on the landers. This videotape shows tests of the FIDO in the Mojave Desert. These tests include drilling through rock and movement of the rover. Also included in this tape are interviews with Dr Raymond Arvidson, the test director for FIDO, and Dr. Eric Baumgartner, Robotics Engineer at the Jet Propulsion Laboratory.
In this paper a machine vision approach is applied to Interferometric Synthetic Aperture Radars (IFSAR) data to extract the most relevant built structures in a dense urban environment. The algorithm tries to cluster primitives (line segments) into more complex surfaces (planes) to approximate the 3D shape of these objects. Very interesting results starting from TOPSAR data recorded over S, Monica are presented.
Air oxidation of hydrazine was studied by using a group of kaolinites, halloysites, and substituent oxides as models for the tetrahedral and octahedral sheets. The rate was found to be linear with oxygen. The stoichiometry showed that oxygen was the primary oxidant and that dinitrogen was the only important nitrogen-containing product. The rates on kaolinites were strongly inhibited by water. Those on three-dimensional silica and gibbsite appeared not to be. That on a supposedly layered silica formed from a natural kaolinite by acid leaching showed transitional behavior--slowed relative to that expected from a second-order reaction relative to that on the gibbsite and silica but faster than those on the kaolinites. The most striking result of the reaction was the marked increase in the rate of reaction of a constant amount of hydrazine as the amount of clay was increased. The increase was apparent (in spite of the water inhibition at high conversions) over a 2 order of magnitude variation of the clay weight. The weight dependence was taken to indicate that the role of the clay is very important, that the number of reactive centers is very small, or that they may be deactivated over the course of the reaction. In contrast to the strong dependence on overall amount of clay, the variation of amounts of putative oxidizing centers, such as structural Fe(III), admixed TiO2 or Fe2O3, or O- centers, did not result in alteration of the rate commensurate with the degree of variation of the entity in question. Surface iron does play some role, however, as samples that were pretreated with a reducing agent were less active as catalysts than the parent material. These results were taken to indicate either that the various centers interact to such a degree that they cannot be considered independently or that the reaction might proceed by way of surface complexation, rather than single electron transfers.
The Indo-Gangetic Plain (IGP) of the northern Indian subcontinent produces anthropogenic pollution from urban, industrial and rural combustion sources nearly continuously and is affected by convection-induced winds driving desert and alluvial dust into the atmosphere during the premonsoon period. Within the IGP, the NASA Aerosol Robotic Network (AERONET) project initiated the TIGERZ measurement campaign in May 2008 with an intensive operational period from May 1 to June 23, 2008. Mesoscale spatial variability of aerosol optical depth (AOD, tau) measurements at 500mn was assessed at sites around Kanpur, India, with averages ranging from 0.31 to 0.89 for spatial variability study (SVS) deployments. Sites located downwind from the city of Kanpur indicated slightly higher average aerosol optical depth (delta Tau(sub 500)=0.03-0.09). In addition, SVS AOD area-averages were compared to the long-tenn Kanpur AERONET site data: Four SVS area-averages were within +/- 1 cr of the climatological mean of the Kanpur site, while one SVS was within 2sigma below climatology. For a SVS case using AERONET inversions, the 440-870mn Angstrom exponent of approximately 0.38, the 440-870mn absorption Angstrom exponent (AAE) of 1.15-1.53, and the sphericity parameter near zero suggested the occurrence of large, strongly absorbing, non-spherical aerosols over Kanpur (e.g., mixed black carbon and dust) as well as stronger absorption downwind of Kanpur. Furthermore, the 3km and lOkm Terra and Aqua MODIS C005 aerosol retrieval algorithms at tau(sub 550) were compared to the TIGERZ data set. Although MODIS retrievals at higher quality levels were comparable to the MODIS retrieval uncertainty, the total number of MODIS matchups (N) were reduced with subsequent quality levels (N=25, QA>=0; N=9,QA>=l; N=6, QA>=2; N=1, QA=3) over Kanpur during the premonsoon primarily due to the semi-bright surface, complex aerosol mixture and cloud-contaminated pixels. The TIGERZ 2008 data set provided a unique opportunity to measure the spatial and temporal variations of aerosol loading in the IGP. The strong aerosol absorption derived from ground-based sun/sky radiometer measurements suggested the presence of a predominately black carbon and dust mixture during the pre-monsoon period. Consistent with the elevated heat-pump hypothesis, these absorbing aerosols found across Kanpur and the greater IGP region during the pre-monsoon period likely induced regional atmospheric warming, which lead to a more rapid advance of the southwest Asian monsoon and above normal precipitation over northern India in June 2008.
Jupiter's moon Europa is a prime candidate in the search for present-day habitable environments outside of the Earth. A number of missions have provided increasingly detailed images of the complex surface of Europa, including the Galileo mission, which also carried instruments that allowed for a limited investigation of the environment of Europa. A new mission to Europa is needed to pursue these exciting discoveries using close-up observations with modern instrumentation designed to address the habitability of Europa. In all likelihood the most cost effective way of doing this would be with a spacecraft carrying a comprehensive suite of instruments and performing multiple flybys of Europa. A number of notional trajectory designs have been investigated, utilizing gravity assists from other Galilean moons to decrease the period of the orbit and shape it in order to provide a globally distributed coverage of different regions of Europa. Navigation analyses are being performed on these candidate trajectories to assess the total Delta V that would be needed to complete the mission, to study how accurately the flybys could be executed, and to determine which assumptions most significantly affect the performance of the navigation system.
The San Joaquin Valley (SJV) suffers from severe health-endangering episodes of PM2.5 aerosol loadings in wintertime; episodes last approximately 5 days and differ in geographical distribution and composition. PM2.5 stations are scattered; consequently the use of remote sensing to map variable regional patterns of these varying respirable aerosol concentrations is desirable. High-precision AOT retrievals can capture column particulate loading. However,PM2.5 mapping is challenging due to several reasons: particularly thin mixed layers (ML) and thus relatively low aerosol optical thickness (AOT) close to current measurement limits, variable and a typical composition of the aerosols, and complex surface bidirectional reflectance. However, the West does present some advantages in analysis. Air basins are isolated from long-distance transport, and experience predominant strong meteorological subsidence. Thus these Western basin regions have fewer problematic cases of overriding aerosol layers detached from the surface. To counter such local overriding, Chu et al. have described an approach for the Eastern US, and He et al have described a synoptic classification approach useful in Shanghai. The Bay Area Air Quality Management District (BAAQMD) expands our experience with the use of AOT, with lower PM2.5 and several isolated sub-basins. We have prepared daily maps of episodes in each region. We present also a sequence of increasingly detailed statistical models, AOT initially appears to contribute little information; however, inclusion of weather information reveals its utility. Lyapustin and Wang's MultiAngle Implementation of Atmospheric Correction (MAIAC) retrieval for AOT provided the most useful operational remote sensing information for these regions. It provides high (1-km) spatial resolution maps and a high percentage of availability. Empirical regression methods have found that random effects regression models (aka mixed effects models, ME) employing AOT provide good estimates of ground PM2.5 concentrations.Here, we attempt to extend these methods and evaluate the usefulness of AOT with greater physical analysis, based on DISCOVER-AQ4 experience.
In order to circumvent the contamination of microorganisms in both extraterrestrial and terrestrial environments, spacecraft hardware must often be sterilized. Current sterilization practices are both time-consuming and expensive. Techniques such as dry heat sterilization and scattered/localized electric field enhancements are incompatible with a variety of hardware materials as well as complex surface shapes. Our group is testing a novel femtosecond pulsed laser for the rapid sterilization of spacecraft hardware using high photon fluxes, which is both an efficient and effective technique to ensure a reduced microbial burden aboard spacecraft. This method is likely to be effective because microorganisms have not encountered high photon fluxes in their evolutionary history and thus contain no protective mechanisms against them. To assess the effectiveness of pulsed laser sterilization, we used a combination of scanning electron microscopy and elemental analysis for the examination of damaged spores on metal coupons, as well as microbiology methods for spore assays. The surfaces of metal coupons inoculated with Bacillus subtilis were illuminated with femtosecond pulses at various wavelengths below the damage threshold for the aluminum. After laser treatment, metal coupon samples were sonicated to dislodge spores, serially diluted, and finally plated and incubated. Results show that sterilization efficiency is favorable in some conditions. The NASA standards for spore assays are a preliminary demonstration in establishing the trend in ability to kill spores. The results show potential for the dual pulse illumination method as a sterilization technique for planetary protection applications.
When considering large-scale impact events that occur in the gravity-regime, smallscale target heterogeneities (on order of the projectile diameter) are anticipated to have a minimal effect on the cratering process and are therefore not considered in scaling relations [1-3]. Such heterogeneities and other details of the target's strength and structure, however, become increasingly influential as the magnitude of the impact decreases [4]. At the scale of craters forming mostly in regolith on the Moon (< a few meters), for example, target properties such as cohesive strength, density, porosity, and friction have more leverage than gravity to influence the resultant crater dimensions [5]. Further complications beyond just target properties can manifest in many forms, such as subsurface layers [6]; the presence of random, competent blocks [7]; buried lenses of impact melt; and/or pockets of regolith compacted or indurated to varying degrees by previous impacts. Summing the total effect of target properties and any additional heterogeneities for integration into scaling relations is not straightforward, as each individual parameter will have unequal, and so far, unquantified, effects on the final crater. Even when craters are produced under a best-case scenario of controlled laboratory conditions, understanding the entire relevant parameter space can be a formidable task, and deconvolution of all the contributing factors can be a complex undertaking. To begin the process of quantifying such effects, we are conducting an extensive series of impact experiments to build a framework for the interpretation of craters observed on the characteristically complex surfaces throughout the solar system. Here we present the first, and simplest, configuration to be examined in this multi-year experimental campaign: one in which solitary, cohesive blocks are placed in the path of the projectile’s trajectory at different burial depths in granular, sand targets. Among the variables to be investigated in this configuration are the influence of block size, compressive strength, and burial depth.
The complexation of cationic antimicrobials with polyanionic microgels on a biomaterial surface can render that surface self-defensive against bacteria by killing those bacteria which physically contact the antimicrobial-loaded microgels. This killing has been attributed to the contact-driven transfer of antimicrobial from a microgel to a challenging bacterium, though much remains unknown about this process. Here, in this study, we use a combination of experiments and computational modeling to identify key aspects of the complexation phenomena which influence the self-defensive properties. We synthesize poly(acrylic acid) (PAA) microgels (∼2–5 μm diameter) via membrane emulsification and electrostatically deposit them onto polycaprolactone (PCL) coupons or onto glass to form a discontinuous submonolayer. Subsequent microgel loading with colistin or with Sub5 antimicrobial peptide (AMP) causes microgel deswelling. Under physiological conditions Sub5 remains stably sequestered whereas colistin is quickly released. Coarse-grained molecular dynamics (CGMD) simulations confirm stronger Sub5/PAA complexation. CGMD calculations also indicate that Sub5 forms dimers and higher-order structures, a prediction confirmed experimentally by Small-Angle X-ray Scattering (SAXS). Supramolecular structure entropically enhances the complexation strength because of enhanced counterion release per complexation event, and this finding can help identify other antimicrobials well suited for such a nonelutive yet self-defensive strategy. CGMD simulations also show that Sub5 has a higher complexation strength with the Staphylococcus aureus membrane than it does with PAA, confirming that there is a thermodynamic driving force for antimicrobial transfer. Such self-defensive surfaces significantly reduce S. aureus colonization (over 90% reduction relative to unmodified controls) in an in vitro hematogenous contamination model and remain cyto-compatible as evidenced by mesenchymal stem cell spreading and proliferation.
The Alpert and Getenio (1988) modification of the Mass and Dempsey (1985) one-level sigma-surface model was used to study four synoptic events that included two winter cases (a Cyprus low and a Siberian high) and two summer cases. Results of statistical verification showed that the model is not only capable of diagnosing many details of surface mesoscale flow, but might also be useful for various applications which require operative short-range prediction of the diurnal changes of high-resolution surface flow over complex terrain, for example, in locating wildland fires, determining the dispersion of air pollutants, and predicting changes in wind energy or of surface wind for low-level air flights.
The complex cepstrum is used to correct bearing estimations of acoustic sources in the presence of a reflective surface. An automated liftering procedure is used which zeros out a block portion of the cepstrum including the echo information. The problem of the resulting distortion is alleviated by applying a coherence criterion to the recovered direct signals at each microphone. Thus to a large degree the interactive nature of cepstral processing is overcome for this application. For the test signals and geometries considered the cepstrum is shown to accurately correct for bearing errors in acoustic signals contaminated with reflections from nearby surfaces.