Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Unreliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Redundancy: How Many Unreliable Spares are Needed for High Reliability and Confidence?

This paper investigates the number of redundant units needed to achieve high reliability with high confidence. The approach is developed for the case when the system failure rate is too high for a single unit to provide the required reliability over the mission duration. To achieve high reliability, N redundant units can be used, one operating unit and N – 1 spares. If the unit failure rate is f, the mission length is L, and f * L is small (not the case assumed here), the unit failure probability over the mission duration is F1 = f * L << 1. In this case, the probability that all N units will fail is Ffail = F1 N , and the needed redundancy N = LN(F)/LN(F1). For the case of large f * L assumed here, F1 = f * L > 1, and F1 is the expected number of failures during the mission. (When F1 = f * L << 1, F1 is the probability that a unit will fail during the mission. When F1 = f * L > 1, F1 is the expected number of failures during the mission.) The needed redundancy, N, to achieve the required N redundant unit reliability, FN, can be computed using the cumulative Poisson distribution with mean equal to F1. The number of spares, N - 1, is increased until the probability - that the total number of failures will be less than N -1 - is equal to the required reliability. The confidence that this reliability can be achieved can be computed using the cumulative Poisson distribution or the chi-square distribution. Since the measured unit failure rate, f, has some probabilistic uncertainty, the actual failure rate will be randomly higher or lower. This means that the reliability of the N redundant systems will be overestimated about half the time. Adding more redundant units increases the confidence that the required reliability will be achieved. For a fixed number of redundant units, the expected reliability and confidence can be traded off, since lower reliability goals will be achieved with higher confidence. Both the desired reliability and confidence can be specified as initial requirements and the needed number of redundant units estimated using the measured failure rate.

Redundancy↗

Error control techniques for satellite and space communications

High rate concatenated coding systems with trellis inner codes and Reed-Solomon (RS) outer codes for application in satellite communication systems are considered. Two types of inner codes are studied: high rate punctured binary convolutional codes which result in overall effective information rates between 1/2 and 1 bit per channel use; and bandwidth efficient signal space trellis codes which can achieve overall effective information rates greater than 1 bit per channel use. Channel capacity calculations with and without side information performed for the concatenated coding system. Concatenated coding schemes are investigated. In Scheme 1, the inner code is decoded with the Viterbi algorithm and the outer RS code performs error-correction only (decoding without side information). In scheme 2, the inner code is decoded with a modified Viterbi algorithm which produces reliability information along with the decoded output. In this algorithm, path metrics are used to estimate the entire information sequence, while branch metrics are used to provide the reliability information on the decoded sequence. This information is used to erase unreliable bits in the decoded output. An errors-and-erasures RS decoder is then used for the outer code. These two schemes are proposed for use on NASA satellite channels. Results indicate that high system reliability can be achieved with little or no bandwidth expansion.

Costello, D. J., Jr.↗

EXTENDED SUBMILLIMETER EMISSION OF THE GALACTIC CENTER AND NEAR-INFRARED/SUBMILLIMETER VARIABILITY OF ITS SUPERMASSIVE BLACK HOLE

The innermost tens of parsecs of our Galaxy are characterized by the presence of molecular cloud complexes surrounding Sgr A*, the radiative counterpart of the supermassive black hole ({approx}4 x 10{sup 6} M{sub sun}) at the Galactic center. We seek to distinguish the different physical mechanisms that dominate the molecular clouds at the Galactic center, with special emphasis on the circumnuclear disk (CND). We also want to study the energy flow and model the variable emission of Sgr A*. Our study is based on NIR and submillimeter (sub-mm) observations. Using sub-mm maps, we describe the complex morphology of the molecular clouds and the circumnuclear disk, along with their masses (of order 10{sup 5}-10{sup 6} M{sub sun}), and derive also the temperature and spectral index maps of the regions under study. We conclude that the average temperature of the dust is 14 {+-} 4 K. The spectral index map shows that the 20 and 50 km s{sup -1} clouds are dominated by dust emission. Comparatively, in the CND and its surroundings the spectral indices decrease toward Sgr A* and range between about 1 and -0.6. These values are mostly explained with a combination of dust, synchrotron, and free-free emission in different ratios. The presence of non-thermal emission also accounts for the apparent low temperatures derived in these areas, indicating their unreliability. The Sgr A* light curves show significant flux density excursions in both the NIR and sub-mm domains. We have defined a classification system to account for the NIR variability of Sgr A*. Also, we have modeled on the NIR/sub-mm events. From our modeling results we can infer a sub-mm emission delay with respect to the NIR; we argue that the delay is due to the adiabatic expansion of the synchrotron source components.

79 ASTRONOMY AND ASTROPHYSICS↗

Approximation methods for stochastic petri nets

Stochastic Marked Graphs are a concurrent decision free formalism provided with a powerful synchronization mechanism generalizing conventional Fork Join Queueing Networks. In some particular cases the analysis of the throughput can be done analytically. Otherwise the analysis suffers from the classical state explosion problem. Embedded in the divide and conquer paradigm, approximation techniques are introduced for the analysis of stochastic marked graphs and Macroplace/Macrotransition-nets (MPMT-nets), a new subclass introduced herein. MPMT-nets are a subclass of Petri nets that allow limited choice, concurrency and sharing of resources. The modeling power of MPMT is much larger than that of marked graphs, e.g., MPMT-nets can model manufacturing flow lines with unreliable machines and dataflow graphs where choice and synchronization occur. The basic idea leads to the notion of a cut to split the original net system into two subnets. The cuts lead to two aggregated net systems where one of the subnets is reduced to a single transition. A further reduction leads to a basic skeleton. The generalization of the idea leads to multiple cuts, where single cuts can be applied recursively leading to a hierarchical decomposition. Based on the decomposition, a response time approximation technique for the performance analysis is introduced. Also, delay equivalence, which has previously been introduced in the context of marked graphs by Woodside et al., Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's is slower, but the accuracy is generally better. Delay equivalence often fails to converge, while flow equivalent aggregation can lead to potentially bad results if a strong dependence of the mean completion time on the interarrival process exists.

Jungnitz, Hauke Joerg↗

Robust state estimation of feeding–blending systems in continuous pharmaceutical manufacturing

State estimation is a fundamental part of monitoring, control, and real-time optimization in continuous pharmaceutical manufacturing. For nonlinear dynamic systems with hard constraints, moving horizon estimation (MHE) can estimate the current state by solving a well-defined optimization problem where process complexities are explicitly considered as constraints. Traditional MHE techniques assume random measurement noise governed by some normal distributions. However, state estimates can be unreliable if noise is not normally distributed or measurements are contaminated with gross or systematic errors. In this paper, to improve the accuracy and robustness of state estimation, we incorporate robust estimators within the standard MHE skeleton, leading to an extended MHE framework. The proposed MHE approach is implemented on two pharmaceutical continuous feeding–blending system (FBS) configurations which include loss-in-weight (LIW) feeders and continuous blenders. Numerical results show that our MHE approach is robust to gross errors and can provide reliable state estimates when measurements are contaminated with outliers and drifts. Finally and moreover, the efficient solution of the MHE realized in this work, suggests feasible application of on-line state estimation on more complex continuous pharmaceutical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Software Implements a Space-Mission File-Transfer Protocol

CFDP is a computer program that implements the CCSDS (Consultative Committee for Space Data Systems) File Delivery Protocol, which is an international standard for automatic, reliable transfers of files of data between locations on Earth and in outer space. CFDP administers concurrent file transfers in both directions, delivery of data out of transmission order, reliable and unreliable transmission modes, and automatic retransmission of lost or corrupted data by use of one or more of several lost-segment-detection modes. The program also implements several data-integrity measures, including file checksums and optional cyclic redundancy checks for each protocol data unit. The metadata accompanying each file can include messages to users application programs and commands for operating on remote file systems.

Rundstrom, Kathleen↗

Development and validation of a software for simulating γ-γ coincidence emission and detection probabilities

Gamma-gamma coincidence spectrometers have the potential to significantly enhance detection sensitivity for ultra-trace radionuclide measurements. The implementation of these spectrometers, however, is limited by the complexity of acquisition hardware, data processing and quantification. This work reports development of a novel radionuclide quantification software for γ-γ coincidence measurements. For any radionuclide, the software parses the Evaluated Nuclear Structure Data File (ENSDF) database, recursively simulating all possible γ-γ coincidence signatures and their respective emission and detection probabilities. Implemented using Python programming language, the software employs several strategies to boost overall computational performance. Since coincidence-based spectrometers are of notable interest in monitoring compliance for the Comprehensive Nuclear-Test-Ban Treaty (CTBT), the software’s execution was tested for 84 CTBT-relevant radionuclides. To date, the software has been experimentally validated for 15 radionuclides using the Advanced Radionuclide Gamma spectrOmeter (ARGO) at Pacific Northwest National Laboratory, USA (PNNL). Notably, the software can be operated in convergence mode, whereby coincidence detection efficiency’s convergence behavior can help avoid unreliable radionuclide activity estimates. With growing number of coincidence spectrometers worldwide, this paper aims to assist the radiation metrology community in developing similar software for their system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Isoreticular Tolerance and Phase Selection in the Synthesis of Multi‐Module Metal–Organic Frameworks for Gas Separation and Electrocatalytic OER

Abstract Although metal–organic frameworks are coordination‐driven assemblies, the structural prediction and design using metal‐ligand interactions can be unreliable due to other competing interactions. Leveraging non‐coordination interactions to develop porous assemblies could enable new materials and applications. Here, we use a multi‐module MOF system to explore important and pervasive impact of ligand‐ligand interactions on metal‐ligand as well as ligand‐ligand co‐assembly process. It is found that ligand‐ligand interactions play critical roles on the scope or breakdown of isoreticular chemistry. With cooperative di‐ and tri‐topic ligands, a family of Ni‐MOFs has been synthesized in various structure types including partitioned MIL‐88‐acs ( pacs ), interrupted pacs (i‐ pacs ), and UMCM‐1‐muo. A new type of isoreticular chemistry on the muo platform is established between two drastically different chemical systems. The gas sorption and electrocatalytic studies were performed that reveal excellent performance such as high C 2 H 2 /CO 2 selectivity of 21.8 and high C 2 H 2 uptake capacity of 114.5 cm 3 /g at 298 K and 1 bar.

Xiao, Yuchen [Department of Chemistry University o↗

Isoreticular Tolerance and Phase Selection in the Synthesis of Multi‐Module Metal–Organic Frameworks for Gas Separation and Electrocatalytic OER

Abstract Although metal–organic frameworks are coordination‐driven assemblies, the structural prediction and design using metal‐ligand interactions can be unreliable due to other competing interactions. Leveraging non‐coordination interactions to develop porous assemblies could enable new materials and applications. Here, we use a multi‐module MOF system to explore important and pervasive impact of ligand‐ligand interactions on metal‐ligand as well as ligand‐ligand co‐assembly process. It is found that ligand‐ligand interactions play critical roles on the scope or breakdown of isoreticular chemistry. With cooperative di‐ and tri‐topic ligands, a family of Ni‐MOFs has been synthesized in various structure types including partitioned MIL‐88‐acs ( pacs ), interrupted pacs (i‐ pacs ), and UMCM‐1‐muo. A new type of isoreticular chemistry on the muo platform is established between two drastically different chemical systems. The gas sorption and electrocatalytic studies were performed that reveal excellent performance such as high C 2 H 2 /CO 2 selectivity of 21.8 and high C 2 H 2 uptake capacity of 114.5 cm 3 /g at 298 K and 1 bar.

Xiao, Yuchen [Department of Chemistry University o↗

Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries

Energy storage is increasingly seen as a valuable asset for electricity grids composed of high fractions of intermittent sources, such as wind power or, in developing economies, unreliable generation and transmission services. However, the potential of batteries to meet the stringent cost and durability requirements for grid applications is largely unquantified. We investigate electrochemical systems capable of economically storing energy for hours and present an analysis of the relationships among technological performance characteristics, component cost factors, and system price for established and conceptual aqueous and nonaqueous batteries. We identified potential advantages of nonaqueous flow batteries over those based on aqueous electrolytes; however, new challenging constraints burden the nonaqueous approach, including the solubility of the active material in the electrolyte. Requirements in harmony with economically effective energy storage are derived for aqueous and nonaqueous systems. The attributes of flow batteries are compared to those of aqueous and nonaqueous enclosed and hybrid (semi-flow) batteries. Flow batteries are a promising technology for reaching these challenging energy storage targets owing to their independent power and energy scaling, reliance on facile and reversible reactants, and potentially simpler manufacture as compared to established enclosed batteries such as lead–acid or lithium-ion.

25 ENERGY STORAGE↗

High-speed real-time 3D shape measurement based on adaptive depth constraint

Stereo phase unwrapping (SPU) has been increasingly applied to high-speed real-time fringe projection profilometry (FPP) because it can retrieve the absolute phase or matching points in a stereo FPP system without projecting or acquiring additional fringe patterns. Based on a pre-defined measurement volume, artificial maximum/minimum phase maps can be created solely using geometric constraints of the FPP system, permitting phase unwrapping on a pixel-by-pixel basis. However, when high-frequency fringes are used, the phase ambiguities will increase which makes SPU unreliable. Several auxiliary techniques have been proposed to enhance the robustness of SPU, but their flexibility still needs to be improved. In this paper, we proposed an adaptive depth constraint (ADC) approach for high-speed real-time 3D shape measurement, where the measurement depth volume for geometric constraints is adaptively updated according to the current reconstructed geometry. By utilizing the spatio-temporal correlation of moving objects under measurement, a customized and tighter depth constraint can be defined, which helps enhance the robustness of SPU over a large measurement volume. Besides, two complementary techniques, including simplified left-right consistency check and feedback mechanism based on valid area, are introduced to further increase the robustness and flexibility of the ADC. Furthermore, experimental results demonstrate the success of our proposed SPU approach in recovering absolute 3D geometries of both simple and complicated objects with only three phase-shifted fringe images.

42 ENGINEERING↗

State-space self-tuner for on-line adaptive control

Dynamic systems, such as flight vehicles, satellites and space stations, operating in real environments, constantly face parameter and/or structural variations owing to nonlinear behavior of actuators, failure of sensors, changes in operating conditions, disturbances acting on the system, etc. In the past three decades, adaptive control has been shown to be effective in dealing with dynamic systems in the presence of parameter uncertainties, structural perturbations, random disturbances and environmental variations. Among the existing adaptive control methodologies, the state-space self-tuning control methods, initially proposed by us, are shown to be effective in designing advanced adaptive controllers for multivariable systems. In our approaches, we have embedded the standard Kalman state-estimation algorithm into an online parameter estimation algorithm. Thus, the advanced state-feedback controllers can be easily established for digital adaptive control of continuous-time stochastic multivariable systems. A state-space self-tuner for a general multivariable stochastic system has been developed and successfully applied to the space station for on-line adaptive control. Also, a technique for multistage design of an optimal momentum management controller for the space station has been developed and reported in. Moreover, we have successfully developed various digital redesign techniques which can convert a continuous-time controller to an equivalent digital controller. As a result, the expensive and unreliable continuous-time controller can be implemented using low-cost and high performance microprocessors. Recently, we have developed a new hybrid state-space self tuner using a new dual-rate sampling scheme for on-line adaptive control of continuous-time uncertain systems.

Shieh, L. S.↗

The effect of abnormal cell proportion on specimen classifier performance

An analysis is presented of the results obtained from a cell classifier which is confronted with an abnormal/normal cell ratio which is different from the ratio assumed in the calibration of the classifier. False negative and false positive error rates are determined in advance for classifier operation, along with the necessary sample size in order to validate the predicted distributions. Changes are demonstrated to happen only regarding the false negative rate, where reductions in the abnormal cell rate below the expected rates would cause totally unreliable data. Substantial overproduction of abnormal cells would be quickly noticeable, while production rates beyond, but close to, the expected rates would only require more extensive sampling. Classifier systems for 10% proportions of abnormal cells are concluded to be possible, but difficulties are present with much lower rates

Castleman, K. R.↗

Integrated Process Monitoring based on Systems of Sensors for Enhanced Nuclear Safeguards Sensitivity and Robustness

This paper illustrates safeguards benefits that process monitoring (PM) can have as a diversion deterrent and as a complementary safeguards measure to nuclear material accountancy (NMA). In order to infer the possible existence of proliferation-driven activities, the objective of NMA-based methods is often to statistically evaluate materials unaccounted for (MUF) computed by solving a given mass balance equation related to a material balance area (MBA) at every material balance period (MBP), a particular objective for a PM-based approach may be to statistically infer and evaluate anomalies unaccounted for (AUF) that may have occurred within a MBP. Although possibly being indicative of proliferation-driven activities, the detection and tracking of anomaly patterns is not trivial because some executed events may be unobservable or unreliably observed as others. The proposed similarity between NMA- and PM-based approaches is important as performance metrics utilized for evaluating NMA-based methods, such as detection probability (DP) and false alarm probability (FAP), can also be applied for assessing PM-based safeguards solutions. To this end, AUF count estimates can be translated into significant quantity (SQ) equivalents that may have been diverted within a given MBP. A diversion alarm is reported if this mass estimate is greater than or equal to the selected value for alarm level (AL), appropriately chosen to optimize DP and FAP based on the particular characteristics of the monitored MBA, the sensors utilized, and the data processing method employed for integrating and analyzing collected measurements. To illustrate the application of the proposed PM approach, a protracted diversion of Pu in a waste stream was selected based on incomplete fuel dissolution in a dissolver unit operation, as this diversion scenario is considered to be problematic for detection using NMA-based methods alone. Results demonstrate benefits of conducting PM under a system-centric strategy that utilizes data collected from a system of sensors and that effectively exploits known characterizations of sensors and facility operations in order to significantly improve anomaly detection, reduce false alarm, and enhance assessment robustness under unreliable partial sensor information.

97 MATHEMATICS AND COMPUTING↗

Nonadiabatic excited-state molecular dynamics: On-the-fly limiting of essential excited states

The simulation of nonadiabatic dynamics in extended molecular systems involving hundreds of atoms and large densities of states is particularly challenging. Nonadiabatic coupling terms (NACTs) represent a significant numerical bottleneck in surface hopping approaches. Rather than using unreliable NACT cutting schemes, here we develop “on-the-fly” state limiting methods to eliminate states that are no longer essential for the non-radiative relaxation dynamics as a trajectory proceeds. Here, we propose a state number criteria and an energy-based state limit. The latter is more physically relevant by requiring a user-imposed energy threshold. For this purpose, we introduce a local kinetic energy gauge by summing contributions from atoms within the spatial localization of the electronic wavefunction to define the energy available for upward hops. The proposed state limiting schemes are implemented within the nonadiabatic excited-state molecular dynamics framework to simulate photoinduced relaxation in poly-phenylene vinylene (PPV) and branched poly-phenylene ethynylene (PPE) oligomers for benchmark evaluation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Novel Deep Learning Transformer Model for Short to Sub‐Seasonal Streamflow Forecast

Accurate short-to-subseasonal streamflow forecasts are becoming crucial for effective water management in an increasingly variable climate. However, streamflow forecast remains challenging over extended lead times, uncertainty in meteorological inputs, and increased frequency and variability in extreme weather and climate events. We implemented a Future Time Series Transformer (FutureTST) model for streamflow forecasting that separately integrates past meteorological and streamflow data while incorporating future weather conditions. FutureTST achieves a mean Nash-Sutcliffe Efficiency (NSE) of 0.82 to 0.67 for 1- to 30-day streamflow forecasts. Incorporating upstream streamflow information improved forecast accuracy by up to 10%. During real-time forecast, FutureTST maintains higher forecast skills of 9.03 for 1-day and 5.74 for 14-day forecasts. In contrast, calibrated process-based hydrological model forecasts become unreliable beyond a 4-day lead time. Our findings demonstrate the potential of FutureTST as a reliable streamflow forecasting tool that offers a valuable addition to operational flood monitoring systems and climate-resilient decision-making.

Ambika, Anukesh Krishnankutty [Oak Ridge National ↗

Spacelab - Beyond development

Spacelab is a series of multiple configuration payload carriers that fit in the Orbiter cargo bay. The carriers, ranging from pressurized modules to simple support structures that span across the cargo bay, provide a variety of payload support services, such as cooling, power distribution, data management, pointing, and structural attachment. Previously published papers have addressed the joint development of the initial Spacelab system by the European Space Agency (ESA) and the National Aeronautics and Space Administration (NASA). Herein, the emphasis will be on the NASA utilization and evaluation of the system into the operational era of the Space Transportation System (STS), system enhancement, additional carrier configuration, the effects of time on system hardware, and subsequent replacements and improvement. All configurations added were intended to fulfill payload requirements not originally foreseen. Subsystem replacements thus far have resulted from life limits or unreliable performance while assessments and plans are underway to look also for increased performance and new payload requirements, to the transition from Spacelab to the Space Station Freedom.

Johnson, Charles W.↗

Evaluating Methods for Measuring Grid Frequency in Low-Inertia Power Systems: Preprint

Accurate measurement of grid frequency is a critical component of reliable grid control. Traditionally, methods such as phase locked loops (PLLs) and discrete Fourier transforms (DFTs) have been used in inverters and phasor measurement units (PMUs) to measure frequency. However, as the percentage of inverter-based resources (IBRs) such as solar and wind has increased, these conventional frequency measurement methods are proving unable to guarantee reliable control in some cases. One challenge is measuring frequency during transient events, where there is a disruption in the steady state sinusoidal voltage. During these events, the underlying frequency of the grid may barely change, but measurement methods report a large spike in frequency due to the disrupted waveform. New methods must balance between suppressing spikes in frequency during faults, and providing fast, accurate, measurements in all other grid operation conditions, especially during events with high rate-of-change-of frequency (ROCOF), which are more prevalent in high-IBR power systems. This paper first surveys frequency measurement methods that have been proposed to reduce measurement errors during transient events. Then, both conventional and more novel frequency measurement methods are tested against an IEEE standard and industry recommendations, and their performance is evaluated for events simulated in PSCAD. Results quantify the trade-offs in performance during different grid conditions and lead to suggestions for the most appropriate frequency and ROCOF measurement methods for low inertia grids.

frequency↗