SEARCH · Search NASA

Results for “TRANSITION ELEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2015

Discrete-Roughness-Element-Enhanced Swept-Wing Natural Laminar Flow at High Reynolds Numbers

Nonlinear parabolized stability equations and secondary-instability analyses are used to provide a computational assessment of the potential use of the discrete-roughness-element technology for extending swept-wing natural laminar flow at chord Reynolds numbers relevant to transport aircraft. Computations performed for the boundary layer on a natural-laminar-flow airfoil with a leading-edge sweep angle of 34.6 deg, freestream Mach number of 0.75, and chord Reynolds numbers of 17 × 10(exp 6), 24 × 10(exp 6), and 30 × 10(exp 6) suggest that discrete roughness elements could delay laminar-turbulent transition by about 20% when transition is caused by stationary crossflow disturbances. Computations show that the introduction of small-wavelength stationary crossflow disturbances (i.e., discrete roughness element) also suppresses the growth of most amplified traveling crossflow disturbances.

Malik, Mujeeb↗

NASA NTRS2001

Stratospheric Age Spectra and Mean Ages from In Situ Observations of Carbon Dioxide

In situ observations of CO2 obtained from 1992 through 2000 using the NASA ER-2 aircraft and high-altitude balloons show that seasonal and interannual variations in CO2 mixing ratios propagate from the troposphere into the lower stratosphere via the tropical tropopause, along with the long-term trend due to fossil fuel combustion. These signals spread laterally and vertically, providing detailed quantitative information about the transport history of sampled air. We have used these data to derive age spectra and mean ages that can be compared with results from models of the stratospheric circulation. For an air parcel at a point in the stratosphere, the age spectrum is defined as the probability distribution function for transit times from the tropical tropopause for each fluid element comprising the parcel. The mean age is the average transit time, corresponding to the first moment of the age spectrum. Age spectra have been derived for altitudes below approximately 20 km for the tropics and for northern midlatitudes where there is sufficient data and where the amplitudes of the seasonal and interannual oscillations in CO2 mixing ratios are large enough to be detected. Tropical age spectra are narrow, with seasonal variation indicating faster ascent during northern winter, consistent with a circulation driven by breaking of extratropical waves. The midlatitude CO2 data are consistent with bimodal age spectra, which could result from a subtropical "barrier" to horizontal exchange over a substantial altitude region. Seasonally resolved mean ages are available with nearly pole-to-pole coverage below 20 km and in the tropics and at middle and high northern latitudes up to the maximum altitude reached by the balloons (approximately 30 km). At ER-2 altitudes, steep meridional gradients in mean age are observed in the subtropics. Between 20 and 30 km, midlatitude air is approximately 2 years older than tropical air at the same altitude. The oldest air sampled was in the Arctic polar vortex with a mean age of .5 plus or minus 0.5 years. This value is much younger than mean ages inferred from simultaneous and previous observations of SF6 in the Arctic vortex, providing evidence for a mesospheric sink for SF6. The mean age in the midlatitude middle stratosphere (approximately 25-32 km) is nearly constant with respect to altitude at 5 plus or minus 0.5 years. Comparison with earlier balloon observations of CO2 dating back to the 1970s shows that the mean age of air in this region has been relatively invariant over the last 25 years.

Andrews, Arlyn E.↗

NASA NTRS2017

Scale-Resolving Simulations of Bypass Transition in a High-Pressure Turbine Cascade Using a Spectral-Element Discontinuous-Galerkin Method

No abstract available

spectral-element↗

NASA NTRS2003

A Comparison of Active and Passive Methods for Control of Hypersonic Boundary Layers on Airbreathing Configurations

Active and passive methods for control of hypersonic boundary layers have been experimentally examined in NASA Langley Research Center wind tunnels on a Hyper-X model. Several configurations for forcing transition using passive discrete roughness elements and active mass addition, or blowing, methods were compared in two hypersonic facilities, the 20-Inch Mach 6 Air and the 31-Inch Mach 10 Air tunnels. Heat transfer distributions, obtained via phosphor thermography, shock system details, and surface streamline patterns were measured on a 0.333-scale model of the Hyper-X forebody. The comparisons between the active and passive methods for boundary layer control were conducted at test conditions that nearly match the nominal Mach 7 flight trajectory of an angle-of-attack of 2-deg and length Reynolds number of 5.6 million. For the passive roughness examination, the primary parametric variation was a range of trip heights within the calculated boundary layer thickness for several trip concepts. The prior passive roughness study resulted in a swept ramp configuration being selected for the Mach 7 flight vehicle that was scaled to be roughly 0.6 of the calculated boundary layer thickness. For the active jet blowing study, the blowing manifold pressure was systematically varied for each configuration, while monitoring the mass flow, to determine the jet penetration height with schlieren and transition movement with the phosphor system for comparison to the passive results. All the blowing concepts tested were adequate for providing transition onset near the trip location with manifold stagnation pressures on the order of 40 times the model static pressure or higher.

Berry, Scott A.↗

NASA NTRS2012

Atomic Decay Data for Modeling K Lines of Iron Peak and Light Odd-Z Elements*

Complete data sets of level energies, transition wavelengths, A-values, radiative and Auger widths and fluorescence yields for K-vacancy levels of the F, Na, P, Cl, K, Sc, Ti, V, Cr, Mn, Co, Cu and Zn isonuclear sequences have been computed by a Hartree-Fock method that includes relativistic corrections as implemented in Cowan's atomic structure computer suite. The atomic parameters for more than 3 million fine-structure K lines have been determined. Ions with electron number N greater than 9 are treated for the first time, and detailed comparisons with available measurements and theoretical data for ions with N less than or equal to 9 are carried out in order to estimate reliable accuracy ratings.

modeling K lines↗

NASA NTRS2021

Transition Analysis for Isolated Trips on BOLT-II Wind-Tunnel and Flight Configuration

The BOLT-II configuration designed for an upcoming flight experiment exemplifies the complexities of hypersonic boundary layer transition in the presence of multiple and potentially interacting instability mechanisms. The present paper is related to the NASA-led roughness experiment on the secondary side of the BOLT-II configuration. First, computations are performed to aid mean-flow based correlations for the transition measurements acquired during an experimental campaign in the Ludwieg Tube facility at the United States Air Force Academy. To that end, both laminar and turbulent flow computations are performed for selected conditions of the experiment with a 1:3 scale model of the slightly shorter BOLT configuration. The variation in well-known correlation parameters for transition due to isolated roughness elements with respect to element position, height, and flow Reynolds number is delineated. Furthermore, the wake instability theory is used to examine the amplification of unstable disturbances behind the centerline trip at the design conditions of the BOLT-II flight experiment and for its dynamically scaled version on the 1:3 scale model of the wind tunnel experiment. To our knowledge, this study represents the first analysis of the wake instabilities in the presence of a prominent entropy layer outside the boundary layer. At the nominal flight design condition of Re ∞ ) = 5.44 and Re ∞ = 2.5 x 10 6 /m, a diamond planform (“pizza-box”) trip with k/δ = 0.70 and planform-halfwidth-to-height ratio of b/k = 3.0 at X/L = 0.254 induces a strong distortion of the boundary-layer flow in the vicinity of the symmetry plane, such that the wake structure includes a centerline streak produced by the flow retardation behind the trip along with multiple additional, prominent vorticity structures representing the necklace vortex system. Stability results reveal that each of these streaks can support a strong amplification of wake instabilities within a frequency band of 95 kHz–255 kHz, with a peak N-factor of greater than 15 beyond X/L ≈ 0.42. The dynamically scaled wind tunnel configuration with Re ∞ = 20.25 x 10 6 /m is also found to support N > 15 at similar axial stations.

BOLT↗

NASA NTRS2021

Transition Analysis for Isolated Trips on BOLT-II Wind-Tunnel and Flight Configuration

BOLT↗

NASA NTRS2014

An Experimental Study of Roughness-Induced Instabilities in a Supersonic Boundary Layer

Progress on an experimental study of laminar-to-turbulent transition induced by an isolated roughness element in a supersonic laminar boundary layer is reported in this paper. Here, the primary focus is on the effects of roughness planform shape on the instability and transition characteristics. Four different roughness planform shapes were considered (a diamond, a circle, a right triangle, and a 45 degree fence) and the height and width of each one was held fixed so that a consistent frontal area was presented to the oncoming boundary layer. The nominal roughness Reynolds number was 462 and the ratio of the roughness height to the boundary layer thickness was 0.48. Detailed flow- field surveys in the wake of each geometry were performed via hot-wire anemometry. High- and low-speed streaks were observed in the wake of each roughness geometry, and the modified mean flow associated with these streak structures was found to support a single dominant convective instability mode. For the symmetric planform shapes - the diamond and circular planforms - the instability characteristics (mode shapes, growth rates, and frequencies) were found to be similar. For the asymmetric planform shapes - the right-triangle and 45 degree fence planforms - the mode shapes were asymmetrically distributed about the roughness-wake centerline. The instability growth rates for the asymmetric planforms were lower than those for the symmetric planforms and therefore, transition onset was delayed relative to the symmetric planforms.

Kegerise, Michael A.↗

NASA NTRS1976

IR pumped third-harmonic generation and sum-frequency generation in diatomic molecules

The potential efficiency of using nonlinear up-conversion techniques for the high efficiency type lasers (CO,CO2, and chemical) is assessed. Results indicate that: the small pump photon energy necessitates the use of molecular media for conversion if resonance enhancement is to be used and that molecular systems present several problems. These difficulties include: their levels are complex; their transition probabilities are often unknown; and the oscillator strengths among vibrational levels in the ground electronic state of a molecule are much smaller than those among electronic states of an atom, thus limiting the magnitude of nonlinear interactions. It is shown that this problem can be eliminated by making use of vibronic transitions which, being primarily electronic transitions have much larger matrix elements and efficient conversion can be achieved with molecular systems.

She, C. Y.↗

NASA NTRS1980

Analytical satellite theory in extended phase space

It is noted that a satellite theory, based on extended phase space and on the true anomaly, was introduced by Scheifele (1970). In the present paper a simple canonical transformation is shown that makes the transition from the classical Delaunay elements to the Scheifele variables. It is stressed that neither spherical coordinates nor Hamilton-Jacobi theory is used. Finally, attention is given to the meaning of the new variables, especially the use of the true anomaly as one of the variables.

Bond, V.↗

NASA NTRS1983

Orbiter windward surface entry Heating: Post-orbital flight test program update

Correlations of orbiter windward surface entry heating data from the first five flights are presented with emphasis on boundary layer transition and the effects of catalytic recombination. Results show that a single roughness boundary layer transition correlation developed for spherical element trips works well for the orbiter tile system. Also, an engineering approach for predicting heating in nonequilibrium flow conditions shows good agreement with the flight test data in the time period of significant heating. The results of these correlations, when used to predict orbiter heating for a high cross mission, indicate that the thermal protection system on the windward surface will perform successfully in such a mission.

Harthun, M. H.↗

NASA NTRS1984

Measuring spectra of arid lands

The principles, instrumentation and data acquisition and interpretation techniques employed in multispectral remote sensing for geological applications are surveyed. Sensing is based on exact measurements of electromagnetic radiation interacting with atoms and molecules in the sensed scene. Absorbed radiation can be used to identify elements in the near-IR bands and emitted or reflected energy can be sensed in the mid- and far-IR. Sunlight normally serves as the exciting source. Wavelength absorptance and emittance characteristics are distinct for the various elements and molecules such as transition metal ions, water, carbonates, etc. The bands for identifying different materials are determined in the laboratory, followed by ground truth field tests. Several hand-held radiometers and spectrometers have been developed for the field trials. Each instrument usually has a limited detection range and serves for developing a data base for subtle distinctions among contiguous minerals with similar radiometric signatures. The data serve for calibrating first airborne and then satellite sensors, e.g., the Landsat MSS and Thematic Mapper. Instruments are also being tested using the Orbiter as the test platform.

Kahle, A. B.↗

NASA NTRS1985

Grazing incidence reflection coefficients of rhodium, osmium, platinum, and gold from 50 to 300 A

Reflectance measurements were made of several metals illuminated from various angles with light at 14 wavelengths in the interval 46.5-283 A. The metals, Rh, Os, Pt and Au were deposited as 125 A films on a binding substrate through electron beam epitaxy. Measurements were made with a grazing incidence monochromator and a reflectometer. The data generally showed lowered reflectance with increasing angles of illumination and shorter wavelengths. The reflectance peak, however, was located at wavelengths of 100-160 A, particularly at large grazing incidences. The wavelengths correspond with the 5p to epsilon-d transition in all of the elements. Rh displayed the highest overall reflectance, and both Rh and Os were more efficient than Au or Pt.

Hettrick, M. C.↗

NASA NTRS1992

Interconversion of diborane(4) isomers

Highly correlated electronic structure computations using many-body perturbation theory and coupled-cluster gradient techniques are used to study the reaction pathway that links the two forms (C2u and D2d) of diborane(4). The results obtained indicate that a low-energy pathway exists for interconversion of the two low-lying isomers of diborane(4). The proposed mechanism consists of a single concerted but nonsynchronous rotation of the BH2 groups. The pathway first follows an idealized reaction coordinate which preserves C2 symmetry, but then bifurcates at a branch point, leading to two equivalent transition states which lack nontrivial elements of symmetry.

Stanton, John F.↗

NASA NTRS1993

Sulfur abundances in the solar wind measured by SWICS on Ulysses

One of the nine experiments on Ulysses (launched October, 1990), the Solar Wind Ion Composition Spectrometer, utilizes an energy per charge deflection system along with time of flight technology to uniquely determine the mass and mass per charge of solar wind particles. Thus the composition of various solar wind types can be analyzed. Using the SWICS data accumulated during the in-ecliptic phase of the mission, we have determined the sulfur abundance, relative to silicon, in two different types of solar wind: transient and coronal hole associated flows. Sulfur is of extreme interest because it is one of the few elements that lies in the transitional region of the FIP-dependent relative abundance enrichment function, observed for solar energetic particles and some types of solar wind flows.

Shafer, C. M.↗

NASA NTRS2000

Hypersonic Boundary-Layer Trip Development for Hyper-X

Boundary layer trip devices for the Hper-X forebody have been experimentally examined in several wind tunnels. Five different trip configurations were compared in three hypersonic facilities, the LaRC 20-Inch Mach 6 Air Tunnel, the LaRC 31 -Inch Mach 10 Air Tunnel, and in the HYPULSE Reflected Shock Tunnel at GASL. Heat transfer distributions, utilizing the phosphor thermography and thin-film techniques, shock system details, and surface streamline patterns were measured on a 0.333-scale model of the Hyper-X forebody. Parametric variations include angles-of-attack of 0-deg, 2-deg, and 4-deg; Reynolds numbers based on model length of 1.2 to 15.4 million: and inlet cowl door simulated in both open and closed positions. Comparisons of transition due to discrete roughness elements have led to the selection of a trip configuration for the Hyper-X Mach 7 flight vehicle.

Berry, Scott A.↗

NASA NTRS2005

Integrated Electron-tunneling Refrigerator and TES Bolometer for Millimeter Wave Astronomy

We describe progress in the development of a close-packed array of bolometers intended for use in photometric applications at millimeter wavelengths from ground- based telescopes. Each bolometer in the may uses a proximity-effect Transition Edge Sensor (TES) sensing element and each will have integrated Normal-Insulator-Superconductor (NIS) refrigerators to cool the bolometer below the ambient bath temperature. The NIS refrigerators and acoustic-phonon-mode-isolated bolometers are fabricated on silicon. The radiation-absorbing element is mechanically suspended by four legs, whose dimensions are used to control and optimize the thermal conductance of the bolometer. Using the technology developed at NIST, we fabricate NIS refrigerators at the base of each of the suspension legs. The NIS refrigerators remove hot electrons by quantum-mechanical tunneling and are expected to cool the biased (approx.10 pW) bolometers to <170 mK while the bolometers are inside a pumped 3He-cooled cryostat operating at approx.280 mK. This significantly lower temperature at the bolometer allows the detectors to approach background-limited performance despite the simple cryogenic system.

Silverberg, R. F.↗

NASA NTRS2011

A Concept for Small, Remotely Operated, Coronagraph located at Small Observatory to Obtain Frequent Low-cost Remote Observations of the Lunar Exosphere and the Mercurian Tail

The sodium in the lunar exosphere is a marker species for studying the lunar exosphere because the element possesses two strong resonance transitions from the ground state whose wavelengths fall in the visible spectrum near 590 nm. Emissions at these wavelengths are thus, observable from Earth. Observations have shown that the exosphere responds in a complex way to the external processes (impact vaporization, sputtering, and photon stimulated desorption) that weather the lunar regolith to produce the sodium. Unraveling the sodium production allows us to study the processes that weather the regolith. Obtaining the extensive time sequence of observations required to unravel the sources of sodium using conventional observatories is impractical, and too expensive. Effectively imaging the lunar sodium exosphere dose to the Moon requires an off-axis rejection of scattered light that can only be obtained with a coronagraph. A related problem. the observation of the sodium tail of Mercury, can be addressed as well only by coronagraphic observations. We present here a concept for a small, rugged coronagraph sited at an observatory dedicated to remote robotic observing (the Winer Observatory in Sonoita Arizona) that can obtain the quality and quantity of lunar sodium observations needed to answer these questions. The design uses Commercial Off the Shelf Technology (COTS). If this facility is operational by 2013. the observations will be concurrent with the Lunar Atmosphere and Dust Environment Explorer (LADEE) mission.

Morgan, T. H.↗