Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tabular data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

GALAXY CLUSTERING IN THE COMPLETED SDSS REDSHIFT SURVEY: THE DEPENDENCE ON COLOR AND LUMINOSITY

We measure the luminosity and color dependence of galaxy clustering in the largest-ever galaxy redshift survey, the main galaxy sample of the Sloan Digital Sky Survey Seventh Data Release. We focus on the projected correlation function w{sub p} (r{sub p}) of volume-limited samples, extracted from the parent sample of {approx}700,000 galaxies over 8000 deg{sup 2}, extending up to redshift of 0.25. We interpret our measurements using halo occupation distribution (HOD) modeling assuming a {Lambda}CDM cosmology (inflationary cold dark matter with a cosmological constant). The amplitude of w{sub p} (r{sub p}) grows slowly with luminosity for L < L{sub *} and increases sharply at higher luminosities, with a large-scale bias factor b(> L) x ({sigma}{sub 8}/0.8) = 1.06 + 0.21(L/L{sub *}){sup 1.12}, where L is the sample luminosity threshold. At fixed luminosity, redder galaxies exhibit a higher amplitude and steeper correlation function, a steady trend that runs through the 'blue cloud' and 'green valley' and continues across the 'red sequence'. The cross-correlation of red and blue galaxies is close to the geometric mean of their autocorrelations, dropping slightly below at r{sub p} < 1 h{sup -1} Mpc. The luminosity trends for the red and blue galaxy populations separately are strikingly different. Blue galaxies show a slow but steady increase of clustering strength with luminosity, with nearly constant shape of w{sub p} (r{sub p}). The large-scale clustering of red galaxies shows little luminosity dependence until a sharp increase at L > 4 L{sub *}, but the lowest luminosity red galaxies (0.04-0.25 L{sub *}) show very strong clustering on small scales (r{sub p} < 2 h{sup -1} Mpc). Most of the observed trends can be naturally understood within the {Lambda}CDM+HOD framework. The growth of w{sub p} (r{sub p}) for higher luminosity galaxies reflects an overall shift in the mass scale of their host dark matter halos, in particular an increase in the minimum host halo mass M{sub min}. The mass at which a halo has, on average, one satellite galaxy brighter than L is M{sub 1} {approx} 17 M{sub min}(L) over most of the luminosity range, with a smaller ratio above L{sub *}. The growth and steepening of w{sub p} (r{sub p}) for redder galaxies reflects the increasing fraction of galaxies that are satellite systems in high-mass halos instead of central systems in low-mass halos, a trend that is especially marked at low luminosities. Our extensive measurements, provided in tabular form, will allow detailed tests of theoretical models of galaxy formation, a firm grounding of semiempirical models of the galaxy population, and new constraints on cosmological parameters from combining real-space galaxy clustering with mass-sensitive statistics such as redshift-space distortions, cluster mass-to-light ratios, and galaxy-galaxy lensing.

79 ASTRONOMY AND ASTROPHYSICS↗

RTN-124: Photometric Redshifts for the Vera C. Rubin Observatory Data Preview

We present the photometric redshifts (photo-z) inferred using algorithms implemented in the Redshift Assessment Infrastructure Layers (RAIL) for the NSF-DOE Vera C. Rubin Observatory Data Preview 2 (DP2). We produce a compilation of reference redshift catalog using spectroscopic, grism and many band photometric redshift dataset hosted on the LIneA Photo-z Server. We curate training and testing set for assessing the scientific and technical performance of Rubin photo-z. The algorithm applied to the object catalog are FlexZBoost, BPZ, kNN, GPz, DNF and TPz; with a combination of 6-band and 4-band photo-z depending on availability of u and y photometry. The redshift point estimates and uncertainty estimation in tabular format through the Large Survey DataBase (LSDB).

79 ASTRONOMY AND ASTROPHYSICS↗

Automatic recognition system for document digitization in nuclear power plants

With the increasing number of data-driven models in nuclear applications, large volumes of numerical data are required to accurately model and predict the health status of a plant component. However, many historical operation logs that contain useful information are not fully utilized due to the lack of a systematic approach of digitization. To overcome this issue, this study proposes an automatic pipeline for extracting information from handwritten tabular documents collected from nuclear power plants. In our pipeline, we first denoise scanned documents with morphological operations, and then extract relevant parts from individual pages using both traditional computer vision and neural network methods. Handwriting recognition is applied to obtain text and numbers. As the most challenging step is how to crop only relevant information, the main focus of our paper is to detect tables and cells from scanned handwritten documents. Here we evaluate the efficiency and accuracy of our proposed method on handwritten operational reports obtained from a real-world case study. The results demonstrate the high accuracy and practicality of our proposed method.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

OpenSesame tutorial

OpenSesame is a program for generating tabular equations of state (EOS), with capabilities for multiphase EOS construction. In this tutorial, we provide an overview of how to run OpenSesame to construct a multiphase EOS. We discuss some general features of OpenSesame, followed by a description of sample input files required for multiphase EOS construction. We also discuss how to extract data from EOS tables in order to compare to experimental data, with an example using the OpenSesame GUI. Lastly, we provide a description of how to generate ASCII-formatted EOS tables most often used by hydro code users.

97 MATHEMATICS AND COMPUTING↗

4th Quarter and Annual Transportation Report FY2018

This report satisfies the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary of waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) in Area 5. This report summarizes the fourth quarter of fiscal year (FY) 2018 and serves as an annual report for the following types of shipments: Low-Level Radioactive Waste (LLW); Mixed Low-Level Radioactive Waste (MLLW); Classified Non-Radioactive (CNR) Waste; Classified Non-Radioactive Hazardous (CNRH) Waste; Tabular summaries are provided that include the following: Number and external volume of LLW, MLLW, and CNR/CNRH shipments; Waste generators for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS; Carriers for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS; Waste generator shipments by quarter; Highway routes used by carriers; Incident and accident data applicable to LLW, MLLW, and CNR/CNRH shipments. In this report, shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. Volume reports showing cubic feet (ft 3 ) generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for conversions from cubic meters to cubic feet. Shipments are transported by motor carriers that are either identified on the U.S. Department of Energy (DOE) Motor Carrier Evaluation Program (MCEP) list, have been evaluated in a manner similar to the MCEP process, or are government vehicles. Government vehicles are not evaluated using the MCEP process but are fully compliant with all transportation regulations and requirements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Waste Shipments to and from the Nevada National Security Site, Radioactive Waste Management Complex (Q3 Transportation Report, FY 2019)

This report satisfies the U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary of waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) in Area 3 and Area 5. This report summarizes the third quarter of fiscal year (FY) 2019 and serves as a quarterly report for the following types of shipments: • Low-Level Radioactive Waste (LLW), • Mixed Low-Level Radioactive Waste (MLLW), • Classified Non-Radioactive (CNR) Waste, and • Classified Non-Radioactive Hazardous (CNRH) Waste. Tabular summaries are provided that include the following: • Number and external volume of LLW, MLLW, and CNR/CNRH shipments, • Waste generators for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS, • Carriers for LLW, MLLW, and CNR/CNRH shipments to and on the NNSS, • Waste generator shipments by quarter, • Highway routes used by carriers, and • Incident and accident data applicable to LLW, MLLW, and CNR/CNRH shipments. In this report, shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. Volume reports using the Low-Level Waste Information System showing cubic feet (ft 3 ) of waste generated may vary slightly due to rounding conventions for conversions from cubic meters to ft 3 .

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The ENDF/B-VIII.0 Compendium Volume IV: Radioactive Decay Rank-Order Analyses

Version 8 of the Evaluated Nuclear Data File (ENDF/B-VIII.0) contains a wealth of nuclear data representing the most recent collection of evaluated neutron cross section measurements, isotopic radioactive decay, and much more. This Compendium has been prepared as a easily-navigable reference of the contents of the ENDF/B-VIII.0 library, while making no statement regarding the accuracy of those contents. The Compendium is split into four volumes. In Volume IV, radioactive decay properties are presented in tabular form, sorted by isotope, energy, element-then- energy, and probability of emission.

07 ISOTOPE AND RADIATION SOURCES↗

Test Information Management System (Report FY 2020 and FY 2021)

Delivery Environments supported work in Fiscal Years 2020 and 2021 to develop the Test Information Management System (TIMS). This effort involved creating a suite of tools consisting of a database and the uploading and downloading scripts. It has been demonstrated that the TIMS database is suitable for archiving raw measurements performed on various measured test articles. The TIMS database has been populated with data from the TRUST projects in FY 20 and FY 21. This included the functional data in the Sensors records as well as metadata stored in records in several other tables. The performed work demonstrated that a database archiving validation test data and integrating it with engineering analysis simulations has a great potential to increase the efficiency, responsiveness, and confidence in the modeling, simulation, and validation efforts for future (and current) weapon systems and assemblies in normal and abnormal environments. In this report, we also discuss how the records belonging to the same project should be arranged, what are the minimum requirements for linking the records using the tabular links, and we provide several recommendations to the projects engineers and the database administrator to improve the TIMS database.

97 MATHEMATICS AND COMPUTING↗

Shock compression of liquid helium to 360 GPa

Data for the shock equation of state of helium are obtained up to 360⁢G⁡Pa, nearly doubling the pressure of previous experimental measurements. The helium samples are first precompressed to 2.7 g⁡c⁢m −3 in a diamond anvil cell prior to laser-driven shock compression at the Omega Laser Facility. Time-resolved Doppler velocimetry and pyrometry reveal significant reflectivity and greater compressibility compared to the predictions of existing broad-range tabular equation of state models, which may be caused by the onset of ionization. These experimental observations, however, are largely captured with molecular-dynamics simulations based on density functional theory, affirming the ability of first-principles techniques to capture complex physics, while enabling critical insight for the behavior of warm dense helium in Jovian interiors and white dwarf atmospheres.

Physics - Plasma physics↗

Data for Rod et al., "Alternating salt and freshwater floods of coastal soils impact soil structure, hydraulic properties, and oxygen dynamics"

This dataset includes laboratory experiment data on soil structure, hydraulic properties, and oxygen dynamics associated with Rod et al. 2026 https://doi.org/10.1002/vzj2.70073. There are six data files from a lab-based flood simulation of either freshwater (FW) or alternating brackish saltwater (SW) and FW using soil cores from a coastal forest at the Smithsonian Environmental Research Center. For soil information please see the Location section of the metadata. Files include: CO2, surface chemistry, water retention, dissolved oxygen, and soil specific surface area. Each file is in CSV format and can be opened/read with any plain text tabular file reader (Microsoft Excel, R, etc.). Purpose of Experiment: To investigate how hydrologic intensification affects soil structure and oxygen dynamics, we conducted a series of laboratory-based flood simulations. After three SW-FW floods (6 floods total) there were significant changes in pore size distribution, significant redistribution of colloids, and the A-horizon became sodic. We concluded that a small number of SW flooding events can induce a measurable change in soil physical properties that directly impacts the biogeochemical dynamics.

54 ENVIRONMENTAL SCIENCES↗

Milestones for Selection, Characterization, and Analysis of the Performance of a Repository for Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain.

This report presents a concise history in tabular form of events leading up to site identification in 1978, site selection in 1987, subsequent characterization, and ongoing analysis through 2009 of the performance of a repository for spent nuclear fuel and high - level radioactive waste at Yucca Mountain in southern Nevada. The tabulated events generally occurred in five periods: (1) commitment to mined geologic disposal and identification of sites; (2) site selection and analysis, based on regional geologic characterization through literature and analogous data; (3) feasibility analysis demonstrating calculation procedures and importance of system components, based on rough measures of performance using surface exploration, waste process knowledge, and general laboratory experiments; (4) suitability analysis demonstrating viability of disposal system, based on environment - specific laboratory experiments, in - situ experiments, and underground disposal system characterization; and (5) compliance analysis, based on completed site - specific characterization . The current sixth period beyond 2010 represents a new effort to set waste management policy in the United States. Because the relationship is important to understanding the evolution of the Yucca Mountain Project , the tabulation also shows the interaction between the policy realm and technical realm using four broad categories of events : (a) Regulatory requirements and related federal policy in laws and court decisions, (c) Presidential and agency directives, (c) technical milestones of implementing institutions, and (d) critiques of the Yucca Mountain Project and pertinent national and world events related to nuclear energy and radioactive waste. Preface The historical progression of technical milestones for the Yucca Mountain Project was originally developed for 10 journal articles in a special issue of Reliability Engineering System Safety on the performance assessment for the Yucca Mountain license application [1-10]. The listing of mile stones, a distinct feature of those articles, has been collected and tabulated here. A lthough a brief description is presented here (based on the summaries in the 10 journal articles), the emphasis remains on the tabulation because of its usefulness in providing a comprehensive but concise history of the Yucca Mountain Project. The tabulation presented here is more elaborate than originally presented in that many of the interactions that occurred between the technical realm and policy realm can be depicted in separate columns. The usefulness of the milestones table is due in part to L.A. Connolly, for editorial and reference support, and S.K. Best, Raytheon, and L. Mays, Sandia National Laboratories (SNL), for illustration support. Reviewers P.N. Swift, SNL, and K. Gupta, University of Oklahoma, helped improve the discussion. The historical perspective presented is that of the author and is not necessarily held by reviewers, Sandia National Laboratories , and the US Department of Energy. As a historic perspective, the author is reporting on the work of others; however, any interpretative error s of the documentation are those of the author alone. The characterization and modeling of the Yucca Mountain disposal system required numerous participants with expertise in many areas of science and technology, as evident from the extensive reference list. Their diligent efforts are generally acknowledged here and through the many references to their impressive work, but the 10 journal articles acknowledge by name many of the numerous participants that contributed to the Yucca Mountain Project .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Milestones for Selection, Characterization, and Analysis of the Performance of a Repository for Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain

This report presents a concise history in tabular form of events leading up to site identification in 1978, site selection in 1987, subsequent characterization, and ongoing analysis through 2008 of the performance of a repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain in southern Nevada. The tabulated events generally occurred in five periods: (1) commitment to mined geologic disposal and identification of sites; (2) site selection and analysis, based on regional geologic characterization through literature and analogous data; (3) feasibility analysis demonstrating calculation procedures and importance of system components, based on rough measures of performance using surface exploration, waste process knowledge, and general laboratory experiments; (4) suitability analysis demonstrating viability of disposal system, based on environment-specific laboratory experiments, in-situ experiments, and underground disposal system characterization; and (5) compliance analysis, based on completed site-specific characterization. Because the relationship is important to understanding the evolution of the Yucca Mountain Project, the tabulation also shows the interaction between four broad categories of political bodies and government agencies/institutions: (a) technical milestones of the implementing institutions, (b) development of the regulatory requirements and related federal policy in laws and court decisions, (c) Presidential and agency directives and decisions, and (d) critiques of the Yucca Mountain Project and pertinent national and world events related to nuclear energy and radioactive waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pressure and electrical resistivity measurements on hot expanded nickel: Comparisons with quantum molecular dynamics simulations and average atom approaches

We present experimental results on pressure and resistivity on expanded nickel at a density of 0.1 g/cm{sup 3} and temperature of a few eV. These data, corresponding to the warm dense matter regime, are used to benchmark different theoretical approaches. A comparison is presented between fully three-dimensional quantum molecular dynamics (QMD) methods, based on density functional theory, with average atom methods, that are essentially one dimensional. In this regime the evaluation of the thermodynamic properties as well as electrical properties is difficult due to the concurrence of density and thermal effects which directly drive the metal-nonmetal transition. Experimental pressures and resistivities are given in a tabular form with temperatures deduced from QMD simulations.

36 MATERIALS SCIENCE↗

Aftershock sequence of the 2011 Virginia earthquake derived from the dense AIDA array and backprojection

After the 23 August 2011 Mineral, Virginia, earthquake, a temporary dense array (Aftershock Imaging with Dense Arrays (AIDA)) consisting of ~200 stations was deployed at 200-400 m spacing near the epicenter for 12 days. Backprojection of the data was used to automatically detect and locate aftershocks. The co-deployment of a traditional aftershock network of 36 stations at ~2-10 km spacing enables a quantitative comparison. The AIDA backprojection aftershock catalog is complete to magnitude -1.0 and includes events as small as M-1.8. For comparison, the traditional network was complete to M-0.3 for the same time period. The AIDA backprojection catalog observes the same major patterns of seismicity in the epicentral region, but additional details are illuminated. The primary zone of seismicity is not a single fault but is a tabular zone of multiple small faults, this zone has a subtle concave shape along strike and with depth, and a broader zone of new events is observed at shallow depth. In addition, a new separate, shallow cluster was detected and located to the east of the main aftershock zone. The addition of smaller events to the catalog did not change the b-value or the temporal decay constant, but illuminated spatial and temporal patterns. Both the b-value and temporal decay constant are different for 12 days than for 4 months and are different at < 3km depth than at greater depth. Very low b-value, especially at greater depth, is consistent with observed very high stress drops. Conclusively, the results indicate the benefits of dense arrays and auto-detection by backprojection for aftershock studies. And finally, the reduced detection threshold and higher spatial resolution enabled the study of earthquake mechanisms and strain transfer at an unprecedented small scale.

Beskardes, Gungor Didem↗

Lithospheric instability and the source of the Cameroon Volcanic Line: Evidence from Rayleigh wave phase velocity tomography

The Cameroon Volcanic Line (CVL) is a 1800 km long volcanic chain, extending SW-NE from the Gulf of Guinea into Central Africa, that lacks the typical age progression exhibited by hot spot-related volcanic tracks. Our study investigates the upper mantle seismic structure beneath the CVL and surrounding regions to constrain the origin of volcanic lines that are poorly described by the classic plume model. Rayleigh wave phase velocities are measured at periods from 20 to 182 s following the two-plane wave methodology, using data from the Cameroon Seismic Experiment, which consists of 32 broadband stations deployed between 2005 and 2007. These phase velocities are then inverted to build a model of shear wave velocity structure in the upper mantle beneath the CVL. Our results show that phase velocities beneath the CVL are reduced at all periods, with average velocities beneath the CVL deviating more than –2% from the regional average and +4% beneath the Congo Craton. This distinction is observed for all periods but is less pronounced for the longest periods measured. Inversion for shear wave velocity structure indicates a tabular low velocity anomaly directly beneath the CVL at depths of 50 to at least 200 km and a sharp vertical boundary with faster velocities beneath the Congo Craton. Finally, these observations demonstrate widespread infiltration or erosion of the continental lithosphere beneath the CVL, most likely caused by mantle upwelling associated with edge-flow convection driven by the Congo Craton or by lithospheric instabilities that develop due to the nearby edge of the African continent.

58 GEOSCIENCES↗

INGENIOUS - Great Basin Regional Dataset Compilation

This is the regional dataset compilation for the INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems (INGENIOUS) project. The primary goal of this project is to accelerate discoveries of new, commercially viable hidden geothermal systems while reducing the exploration and development risks for all geothermal resources. These datasets will be used in INGENIOUS as input features for predicting geothermal favorability throughout the Great Basin study area. Datasets consist of shapefiles, geotiffs, tabular spreadsheets, and metadata that describe: 2-meter temperature probe surveys, quaternary faults and volcanic features, geodetic shear and dilation models, heat flow, magnetotellurics (conductance), magnetics, gravity, paleogeothermal features (such as sinter and tufa deposits), seismicity, spring and well temperatures, spring and well aqueous geochemistry analyses, thermal conductivity, and fault slip and dilation tendency. For additional project information, see the INGENIOUS project site linked in the submission. Terms of use: These datasets are provided "as is", and the contributors assume no responsibility for any errors or omissions. The user assumes the entire risk associated with their use of these data and bears all responsibility in determining whether these data are fit for their intended use. These datasets may be redistributed with attribution (see citation information below). Please refer to the license information on this page for full licensing terms and conditions.

15 GEOTHERMAL ENERGY↗

An introduction to the theory and use of SESAME equations of state

This paper details aspects of the three-component, Helmholtz free energy, equation of state (EOS) model that serves as the construction basis for the majority of the tabular equations of state residing in the SESAME database. The three components account for contributions to the total free energy from the cold curve (or zero Kelvin isotherm), the nuclear vibrational excitations, and the thermal electronic excitations. Decomposition of the model into these three components is a consequence of the underlying theoretical framework describing materials in the condensed matter phase since each of the free energy components directly correspond to a term in the condensed matter system Hamiltonian. In addition to providing an introduction to the theoretical basis of the three-component model and an account of the empirical data utilized to construct an EOS, the aim of this paper is to enable readers to evaluate the applicability of a particular EOS within the context of a problem they are solving by reviewing the thermodynamic phase space in which it has been appropriately constrained. This paper does not aim to serve as an exhaustive documentation of the various methods used in construction of the SESAME tables. Instead, it focuses on the models used during the construction of a particular EOS for aluminum performed by Sjostrom et al. [SCR16] as an illustrative example.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Doppler effects on 3-D non-LTE radiation transport and emission spectra.

Spatially and temporally resolved X-ray emission lines contain information about temperatures, densities, velocities, and the gradients in a plasma. Extracting this information from optically thick lines emitted from complex ions in dynamic, three-dimensional, non-LTE plasmas requires self-consistent accounting for both non-LTE atomic physics and non-local radiative transfer. We present a brief description of a hybrid-structure spectroscopic atomic model coupled to an iterative tabular on-the-spot treatment of radiative transfer that can be applied to plasmas of arbitrary material composition, conditions, and geometries. The effects of Doppler line shifts on the self-consistent radiative transfer within the plasma and the emergent emission and absorption spectra are included in the model. Sample calculations for a two-level atom in a uniform cylindrical plasma are given, showing reasonable agreement with more sophisticated transport models and illustrating the potential complexity - or richness - of radially resolved emission lines from an imploding cylindrical plasma. Also presented is a comparison of modeled L- and K-shell spectra to temporally and radially resolved emission data from a Cu:Ni plasma. Finally, some shortcomings of the model and possible paths for improvement are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗