Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thick Target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Ab initio modeling of nonequilibrium electron-ion dynamics of iron in the warm dense matter regime

Here, the spatiotemporal electron and ion relaxation dynamics of iron induced by femtosecond laser pulses was studied using a one-dimensional two-temperature model (1D-TTM) where electron and ion temperature-dependent thermophysical parameters such as specific heat ( C ), electron-phonon coupling ( G ), and thermal conductivity ( K ) were calculated with ab initio density-functional-theory (DFT) simulations. Based on the simulated time evolutions of electron and ion temperature distributions [ T e ( x,t ) and T i ( x,t )], the time evolution of x-ray absorption near-edge spectroscopy (XANES) was calculated and compared with experimental results reported by Fernandez-Pañella et al., where the slope of XANES spectrum at the onset of absorption (s) was used due to its excellent sensitivity to the electron temperature. Our results indicate that the ion temperature dependence on G and C , which is largely neglected in the past studies, is very important for studying the nonequilibrium electron-ion relaxation dynamics of iron in warm dense matter (WDM) conditions. It is also shown that the 1/s behavior becomes very sensitive to the thermal gradient profile, in other words, to the values of K in a TTM simulation, for target thickness of about two to four times the mean free path of conduction electrons. Our approach based on 1D-TTM and XANES simulations can be used to determine the optimal combination of target geometry and laser fluence for a given target material, which will enable us to tightly constrain the thermophysical parameters under electron-ion nonequilibrium WDM conditions.

36 MATERIALS SCIENCE↗

X-ray spectroscopy of buried layer foils irradiated at laser intensities in excess of 10{sup 20} W/cm{sup 2}

Observations of a rapid decrease in thermal temperature as a function of depth of solid targets irradiated with a short pulse, ultrahigh-intensity laser are reported. This phenomenon is investigated using the Titan short pulse laser with intensities greater than 10{sup 20} W/cm{sup 2} interacting with buried layer targets. The longitudinal temperature profile is determined by measuring K-shell spectra from a 0.4 {mu}m copper tracer layer placed at various depths (i.e., 0-1.5 {mu}m) within the 2.4 {mu}m thick target. It is observed that the line ratios (He-like K-shell lines) as a function of temperature require a consideration of at least three parameters to analyze the K-shell spectra: hot electron population, time-dependent plasma conditions, and opacity. Here, the study of the effect of these three parameters on measured spectra in the short pulse high intensity laser-matter interactions using the atomic model FLYCHK[H.-K. Chung et al., High Energy Density Phys. 1, 3 (2005)] is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Benchmarking Monte Carlo codes for the modelling of low-energy neutron production target reactions

The increasing adoption of accelerator-based neutron sources (ABNS) for applications including neutron capture therapy (NCT) research has highlighted the need for accurate simulation tools. Precise modelling of the neutron production target is crucial to ensure that simulated predictions of neutron beam characteristics used for subsequent beam shaping assembly design are reliable. This work presents a comprehensive benchmarking of four widely-used Monte Carlo codes - Geant4, PHITS, FLUKA (CERN), and MCNP - for modelling low-energy neutron production target reactions. Using their recommended physics models and cross-section libraries, we evaluate each code’s performance in simulating four beam-target reactions: 7 Li(p,n) 7 Be, 9 Be(p,n) 9 B, 9 Be(d,n) 10 B, and C(d,n)N. Predictions of neutron yield, angular distributions, and energy spectra are compared against available thick target experimental data. Results show varying levels of agreement between the codes depending on the reaction type, energy range, and beam characteristics. Geant4, MCNP and PHITS are the overall best performing codes for the simulation of total neutron yield and yield in the forward direction across most reactions. Across energies where experimental benchmarks exist, inter-code discrepancies in total and forward-directed yield are typically 10 to 30%, with larger deviations at near-threshold incident ion energies. PHITS provides the best overall reproduction of experimental spectra, particularly for the 9 Be(p,n) 9 B reaction. Additionally, PHITS demonstrates superior computational performance for most reactions. These findings provide valuable guidance for ABNS design, highlighting the strengths and limitations of each code for the simulation of low-energy neutron production reactions.

43 PARTICLE ACCELERATORS↗

Initiated chemical vapor deposition polymers for high peak-power laser targets

Here, we report two examples of initiated chemical vapor deposition (iCVD) polymers being developed for use in laser targets for high peak-power laser systems. First, we show that iCVD poly(divinylbenzene) is more photo-oxidatively stable than the plasma polymers currently used in laser targets. Thick layers (10–12 μm) of this highly crosslinked polymer can be deposited with near-zero intrinsic film stress. Second, we show that iCVD epoxy polymers can be crosslinked after deposition to form thin adhesive layers for assembling precision laser targets. The bondlines can be made as thin as ~ 1 μm, approximately a factor of 2 thinner than achievable using viscous resin-based adhesives. These bonds can withstand downstream coining and stamping processes.

36 MATERIALS SCIENCE↗

Cross-sections for (p,x) reactions on natural chromium for the production of 52,52m,54 Mn radioisotopes

The production of positron-emitting isotopes of manganese is potentially important for developing contrast agents for dual-modality positron emission tomography and magnetic resonance (PET/MR) imaging, as well as for in vivo imaging of the biodistribution and toxicity of manganese. Furthermore, the decay properties of 52 Mn make it an excellent candidate for these applications, and it can easily be produced by bombardment of a chromium target with protons or deuterons from a low-energy biomedical cyclotron. There are several parameters essential to this mode of production—target thickness, beam energy, beam current, and bombardment time—depend heavily on the availability of reliable, reproducible cross-section data. Our paper contributes to the routine production of 52g Mn for biomedical research by contributing experimental cross-sections for natural chromium ( nat Cr) targets for the nat Cr(p,x) 52g Mn reaction, as well as for the production of the radiocontaminants 52m, 54 Mn.

07 ISOTOPE AND RADIATION SOURCES↗

Combustion-assisted ink-jet printing of nuclear targets

Advances in target fabrication are critical to high-precision measurements in nuclear physics. This work details the preparation of patterned CeO 2 and ThO 2 architectures and thin-film targets via ink-jet deposition of combustible solutions. The produced targets were characterized by scanning electron microscopy (SEM), and by alpha-particle spectroscopy for radioactive targets to determine densities. Ink jet printing of the targets, used both ethanol and 2-methoxyethanol as solvents, with cerium or thorium nitrate as the oxidizer and acetylacetone as the fuel. Additionally, we found that the distance between each droplet dispersion (step size) played the most significant role in determining the final pattern uniformity and thickness. A 50 μm step size leads to relatively thick targets with a density of 350 μg/cm 2 . Significant overlap in droplet sizes leads to a heterogeneous target with an undesirable cracked surface structure. In contrast, 150 μm spacing yields thinner (20 μg/cm 2 ) patterned structures with excellent surface coverage. This method of Ink-jet printing provides a straightforward, scalable, and high-efficiency pathway to prepare custom made, high-quality targets for nuclear physics experiments.

CeO2↗

A heavy-ion production channel of 149 Tb via 63 Cu bombardment of 89 Y

We report the radionuclide 149 Tb (t 1/2 = 4.1 h) is a potential theranostic isotope which can simultaneously be used for targeted-alpha-particle therapy and positron-emission tomography. Feasibility experiments were performed to test a near-symmetric heavy-ion reaction of 63 Cu bombardment on monoisotopic 89 Y. The indirect reaction was studied to avoid isomer production. Offline gamma spectroscopy was used to quantify thick-target physical yields and experimental results show modest agreement to the fusion-evaporation code PACE4. A near-symmetric fission yield was also observed.

149Tb↗

Optimization of high energy x ray production through laser plasma interaction

A standard technique for generating a burst of hard x rays (above 30 keV) is to use ultra high intensity lasers incident on a target. The strong laser field causes rapid electron oscillations which then generate hard x rays via bremsstrahlung. We have demonstrated a new technique for optimizing the conversion efficiency of laser light to hard x rays at moderate Iλ 2 (mid 10 13 W/cm 2 .µm 2 ) assuming that the two plasmon decay plasma instability is the predominant acceleration mechanism. In this scheme, electrons are not directly accelerated by the laser field but by electron plasma waves. Experiments at the National Ignition Facility show the effect of a pre-pulse on the hard x ray spectrum and conversion efficiency. Different experimental configurations are investigated to optimize the conversion efficiency using various pre-pulse levels as well as different target designs (gold vs. silver, varying target thickness, presence of an ablator layer of CH). The conversion efficiency of laser energy into photon above 30 keV for a 100 ps short pulse scales as~ I 1.23 for laser intensity ranging from 1 x 10 16 to 1 x 10 17 W/cm 2 at 3ω for high Z target. A 1-ns-long pre-pulse pre-seeding an 88-ps Gaussian laser pulse coupled with a CH-coated thin Au target led the highest conversion efficiency above 30 keV of ~3 x 10 -4 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High contrast ion acceleration at intensities exceeding 10{sup 21} Wcm{sup −2}

Ion acceleration from short pulse laser interactions at intensities of 2×10{sup 21}Wcm{sup −2} was studied experimentally under a wide variety of parameters, including laser contrast, incidence angle, and target thickness. Trends in maximum proton energy were observed, as well as evidence of improvement in the acceleration gradients by using dual plasma mirrors over traditional pulse cleaning techniques. Extremely high efficiency acceleration gradients were produced, accelerating both the contaminant layer and high charge state ions from the bulk of the target. Two dimensional particle-in-cell simulations enabled the study of the influence of scale length on submicron targets, where hydrodynamic expansion affects the rear surface as well as the front. Experimental evidence of larger electric fields for sharp density plasmas is observed in simulation results as well for such targets, where target ions are accelerated without the need for contaminant removal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies of Laser-Driven Flyer Acceleration Using Optical Fiber Coupling [Book Chapter]

An optically recording velocity interferometer system has been used to measure acceleration histories and maximum velocities for laser-driven aluminum foil targets launched from the output face of optical fibers. Peak flyer velocities have been determined as a function of various parameters, including driving laser fluence, laser pulse duration and target thickness. The results at high fluences are consistent with a nearly constant efficiency of coupling optical energy into flyer kinetic energy and a small ablated mass fraction; however, the coupling efficiency falls off rapidly at fluences < 15 J-cm -2 . Measurement of the time delay between laser pulse arrival at the target and the onset of flyer motion have also been performed. Significant delays are observed at low fluences, arising from the increased time required for plasma formation at the fiber/foil interface under these conditions.

440600 -- Optical Instrumentation-- (1990-)↗

A CYCLOTRON CONCEPT TO SUPPORT ISOTOPE PRODUCTION FOR SCIENCE AND MEDICAL APPLICATIONS

In August of 2009, the Nuclear Science Advisory Committee (NSAC) recommended a variable-energy, high-current multi-particle accelerator for the production of medical radioisotopes. The Oak Ridge National Laboratory is developing a technical concept for a 70 MeV dual-extraction multi-particle cyclotron that will meet the needs identified in the NSAC report. The cyclotron, which will be located at the Holifield Radioactive Ion Beam Facility (HRIBF), will operate on a 24/7 basis and will provide approximately 6000 hours per year of quality beam time for both the production R&D and production of medical and industrial radioisotopes. The proposed cyclotron will be capable of accelerating dual beams of 30 to 70 MeV H at up to 750 A, and up to 50 A of 15-35 MeV D , 35 MeV H2, and 70 MeV -particles. In dual-extraction H mode, a total of 750 A of 70 MeV protons will be provided simultaneously to both HRIBF and Isotope Production Facility. The isotope facility will consist of two target stations: a 2 water-cooled station and a 4 water-cooled high-energy-beam research station. The multi-particle capability and high beam power will enable research into new regimes of accelerator-produced radioisotopes, such as 225Ac, 211At, 68Ge, and 7B. The capabilities of the accelerator will enable the measurement of excitation functions, thick target yield measurements, research in high-power-target design, and will support fundamental research in nuclear and radiochemistry.

cyclotron↗

Mott Polarimeter Upgrade at Jefferson Lab

A Mott polarimeter with a design optimized for 5.5 MeV/c has been in routine use at the CEBAF accelerator for well over a decade, providing polarization measurements approaching 1\% accuracy. Measurements with different target elements (Au, Ag, Cu) over decades of target thicknesses (100 -- 10,000 angstroms), and beam energies between 2 and 8 MeV allow us to determine the effective analyzing power with a high degree of certainty. Recent and planned improvements in our polarimeter configuration, detectors and data acquisition system, coupled with a low 31 MHz repetition rate beam allow us to distinguish and suppress electrons that do not originate from the target foil. This work coupled with a significant effort to produce a detailed GEANT4 model of the polarimeter is part of an effort to determine systematic uncertainties at the level of the theoretically calculated analyzing power. We describe our activities and a series of planned measurements that will allow us to demonstrate and possibly improve the precision and accuracy of polarization measurements at JLab, as required for future parity violation experiments.

McHugh, M.↗

Relativistically Induced Transparency in Plasma (Final Research Report)

The major goal of this project was to study the process of relativistic transparency in plasmas. This process occurs when a very high intensity laser pulse interacts with a plasma. The electric field of the laser oscillates the electron speeds approaching the speed of light, increasing the effective mass of the electrons by the time-averaged Lorentz factor <γ>. The increase in the effective mass alters the critical density, the density at which the plasma becomes opaque to the electromagnetic wave of the laser. This project used experiments and particle-in-cell simulations to study this process in ultra-thin foil interactions. Experiments were performed through the LaserNetUS program on the Ohio State University laser system Scarlet. The transmitted and reflected light was studied as a function of the target thickness, the near-field profiles, the total energy and pulse duration were measured. Particle-in-cell simulations, using the OSIRIS code were used to model the interaction and better understand the dynamics. The results of both show current relativistic transparency theory is insufficient to predict the results, this is likely because the theories do not account for the laser energy absorption into the target and global plasma fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A concept for polarized 3 He targets for high luminosity scattering experiments in high magnetic field environments

In this work, we present the conceptual design of a polarized 3 He target to be used for high luminosity scattering experiments within high magnetic field environments. This two-cell target will take advantage of advancements in optical pumping techniques at high magnetic field to create 60% longitudinally polarized 3 He gas in a pumping cell within a uniform magnetic field above 1 T. By transferring the polarized gas to a cryogenic target cell, the gas density is increased to create a target thickness suitable for high luminosity applications. We discuss the general design of this scheme, and plans for its application in Jefferson Lab’s CLAS12 detector.

3He polarization↗

Laser-driven γ-ray, positron, and neutron source from ultra-intense laser-matter interactions

In ultra-intense laser-matter interactions, γ-rays are effectively generated via the radiation reaction effect. Since a significant fraction of the laser energy is converted into γ-rays, understanding of the energy transport inside of the target is important. We have developed a Particle-in-Cell code which includes generation of the γ-rays, their energy transport, and photo-nuclear reactions. Using the code, we have investigated the characteristics of the quantum beams generated by the transport of the laser-driven γ-rays. It is shown that collimated, mono-energetic positron beams with hundreds of MeV are generated by using thick targets. Neutron beams are also effectively generated by using beryllium targets via photo-nuclear reactions. These lead to the proposal of quantum beam sources of γ-rays, positrons, and neutrons with distinctive characters, which are selectively generated by choosing target conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving the Reproducibility of the Radial Argon Concentration in Beryllium Shells

We used sputter coating of beryllium on spherical mandrels at Lawrence Livermore National Laboratory and at General Atomics to produce graded, copper doped beryllium shells. While these coatings have consistent microstructure and acceptable void content, different coaters produced different results with respect to argon implantation. Each individual system met the requirements for argon implantation, but the deviation from one system to another and from run to run exceeded the variability requirements as specified by the National Ignition Facility target design requirements. We redesigned the fixturing within one system to improve reproducibility. Furthermore, we reconfigured the coaters so that the vertical and lateral alignments of the shells under the gun varied <1 mm between systems. After this process, the systems were able to produce beryllium capsules with radial argon profiles that met specifications and were consistent from run to run and from system to system. During this process we gained insight into the beryllium coating process. Finally, the radial argon variation was shown to be dependent on sputter target thickness. We also found that the argon content in the shells was extremely dependent on the position of the shells with respect to the gun.

42 ENGINEERING↗

Dose rates near the Service Buildings for Al, Cu, Fe and Pb targets

Fluka simulations were performed to model fault conditions that result in the electron beam hitting different materials found in the storage ring (SR), namely aluminum in beam pipes, copper in magnet coils, iron in magnet yokes and lead in local shields. The primary goal of the simulations was to determine dose distributions outside the bulk shielding due to beam losses for different fault conditions. These predicted doses can be used to provide guidance regarding the need for additional shielding or administrative safeguards. A secondary goal was to compare the simulated dose at three different locations with the dose obtained from analytical calculations using the thick target approximation. The analytical calculations are quick and easy and do not require detailed modeling of the geometry. If these calculations can indeed provide reasonably accurate estimates of the dose then they can be used instead of the detailed FLUKA simulations which require more time, effort and computational resources. However the assumptions embedded in the analytical methods result in the maximum possible yield of secondary particles and will therefore overestimate the radiation dose and the radiation shielding required.

36 MATERIALS SCIENCE↗

Three dimensional effects on proton acceleration by intense laser solid target interaction

Multi-dimensional effects on ion acceleration by a normally incident linearly polarized intense laser pulse interacting with a thin solid target have been investigated numerically, where the laser has the peak intensity of 1.37×10{sup 20} W/cm{sup 2}, focused spot size of 6 μm, pulse duration of 33 fs, and total pulse energy about 3 J, which are commercially available now. We have checked the effects of simulation geometries by running one, two, and three dimensional (1D, 2D, 3D) particle-in-cell simulations. 3D simulation results show that, in the case of using a relatively thick target (in the opaque regime, i.e., 2 μm) with the so-called target normal sheath field acceleration mechanism, electrons spread almost uniformly along two transverse directions. While in the case of using an ultra-thin target (in the relativistic-induced transparent regime, i.e., 100 nm) with the so-called break-out afterburner mechanism, electrons spread more quickly along the direction orthogonal to the laser polarization direction especially at the early stage. The transverse spreading of electrons strongly decreases the electron density at the rear side of the target. Such an effect causes different estimation of electron temperatures in different simulation geometries. Usually, 1D and 2D simulations overestimate the temperature; and as a result, the maximum proton energy observed in 1D and 2D simulations is, respectively, about 3 and 2 times of that observed in 3D simulation.

43 PARTICLE ACCELERATORS↗