Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Solar cells for lunar applications by vacuum evaporation of lunar regolith materials

The National Space Exploration Initiative, specifically the Lunar component, has major requirements for technology development of critical systems, one of which is electrical power. The availability of significant electrical power on the surface of the Moon is a principal driver defining the complexity of the lunar base. Proposals to generate power on the Moon include both nuclear and solar (photovoltaic) systems. A more efficient approach is to attempt utilization of the existing lunar resources to generate the power systems. Synergism may occur from the fact that there have already been lunar materials processing techniques proposed for the extraction of oxygen that would have, as by-products, materials that could be specifically used to generate solar cells. The lunar environment is a vacuum with pressures generally in the 1 x 10(exp -10) torr range. Such conditions provide an ideal environment for direct vacuum deposition of thin film solar cells using the waste silicon, iron, and TiO2 available from the lunar regolith processing meant to extract oxygen. It is proposed, therefore, to grow by vacuum deposition, thin film silicon solar cells from the improved regolith processing by-products.

Ignatiev, Alex↗

Titanium aluminides - Surface composition effects as a function of temperature

Results are presented from an AES investigation of the surface characteristics of pure Ti, Ti-14Al-21Nb (alpha-2 aluminide), and Ti-33Al-6Nb-1.4Ta (gamma aluminide) under ultrahigh vacuum conditions over the 20-1000 C temperature range. The observed variations in surface composition are noted to be dramatic and indicative of a direct relationship between the amount of retained oxygen and carbon on the surface and the quantity of Al in that surface's vicinity. While TiO2 was the main surface oxide for pure Ti and the alpha-2 and gamma aluminides, only metallic peaks were observable at 600 C; at 1000 C, metallic Al and Ti were observed.

Outlaw, R. A.↗

Paramagnetic resonance and susceptibility of ilmenite, FeTiO3 crystal

Large high-purity single crystals of FeTiO3 with ilmenite structure have been grown from a stoichiometric melt of Fe2O3 and TiO2 under an inert atmosphere using the modified Czochralski technique. Susceptibility and X-band paramagnetic resonance studies have been performed. Susceptibility measurements indicate a Neel temperature of about 59 K. The paramagnetic resonance spectrum for magnetic field perpendicular to the crystal c axis consists of a portion of a single, very intense approximately Lorentzian absorption line with its peak at about 600 G and half width at half maximum almost 1200 G. The absorption extends to zero magnetic field. For magnetic field approximately parallel to the c axis, the paramagnetic absorption is much smaller and may be considered a superposition of two approximately Lorentzian line shapes. The magnetic resonance measurements indicate a weak temperature dependence and large angular anisotropy.

Mcdonald, P. F.↗

Hydrogen, helium, and other solar-wind components in lunar soil - Abundances and predictions

The lack of a shielding atmosphere on the moon permits solar-wind particles to impinge upon the lunar soil and become implanted into the various phases which comprise the soil. Relatively large quantities of solar-wind implanted hydrogen (50-100 ppm) and helium (10-50 ppm) are present. The measured parameter of I(s)FeO, a direct indicator of maturity and exposure age, can be used as a first approximation to predict the abundances of many solar-wind components in the soils. However, because ilmenite acts as a 'sponge' for the retention of certain elements, the TiO2 content of the soil is a better indicator for hydrogen and helium contents.

Taylor, Lawrence A.↗

Oxidation behavior of cubic phases formed by alloying Al3Ti with Cr and Mn

Gravimetric, SEM, and XRD data are presented which document the significant improvement obtainable in the oxidation resistance of Al3Ti-containing alloys through additions of Cr. The L1(2) Al(67)Cr(8)Ti25 alloy exhibited excellent cyclic oxidation resistance at 1473 K, with the primary oxide formed being the ideally protective alpha-Al2O3. The Al(67)Mn(8)Ti(25) alloy also tested for comparison exhibited poor cyclic oxidation resistance, with substantial occurrence of TiO2 in the protective scales. Catastrophic oxidation was also encountered in the quaternary alloy Al(67)Mn(8)Ti(22)V(3).

Parfitt, L. J.↗

Exploration of relationships between low-Ti and high-Ti pristine lunar glasses using an armalcolite assimilation model

The pristine glasses of Delano are the most primitive lunar basaltic magma compositions discovered to date. They are grouped into two (and possibly three) arrays: a low-alumina array and a high alumina array. These glasses are very olivine normative and are multiply saturated at pressures of approximately 20 kbar, implying a depth of origin of 400 to 500 km in the Moon. Thus, these glasses appear to be the best candidates for primitive partial melts of the upper lunar mantle. One of the most perplexing characteristics of the pristine glasses is a positive correlation between Ni and SiO2 within each array. This is contrary to the terrestrial experience, where Ni is observed to positively correlate with MgO and negatively correlate with SiO2. These systematics are believed to be due to the depletion of Ni by olivine fractionation. The difference between the lunar and terrestrial Ni vs. SiO2 trends may be partially ascribed to the Ti-rich component. In the case of the pristine glasses, SiO2 increases not because of olivine fractionation, but because they contain less of the high-Ti component. An attempt was made to model this variation in Ni and SiO2 with a simple assimilation-fractional crystallization (AFC) model. Silica and Ni both decreased dramatically as the AFC process proceeded. Only 15 to 20 percent AFC was necessary to produce the observed variation, and the SiO2 vs. Ni variation was modeled quite well. The D(Ni) for olivine/liquid in this model was taken to be 10 and the olivine was assumed to be Fe sub 80. However, the results of this model for Ti and Mg were less than satisfactory. It seemed difficult to achieve the high TiO2 contents of some glasses (16 to 17 wt. percent) by this method. Continual addition of ilmenite by AFC could indeed raise the titania concentrations to the necessary levels, but only by enriching the magma in FeO and greatly depleting the magma in MgO. An attempt was made to circumvent this problem by using armalcolite, (Fe, Mg)Ti2O5, in the AFC model, and the results are presented.

Jones, John H.↗

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo

Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using X-ray diffraction techniques, electron microprobe analysis, and energy dispersive X-ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.

Wallace, T. A.↗

neoKREEP: A new lunar component at Apollo 17

The Apollo 11 (Mare Tranquillitatis) and Apollo 17 (Mare Serenitatis) landing sites are important as the only sources of high-Ti basalt visited by the Apollo missions. The lunar high-Ti basalts (greater than 6 percent TiO2) have no volumetrically comparable analogs among terrestrial basalts and require the presence of ilmenite in the source region, probably representing cumulates produced late in the crystallization of the lunar magma ocean. Six principal groups of high-Ti basalts are described, three from each of the two sites.

Jerde, Eric A.↗

NASA Space Engineering Research Center for utilization of local planetary resources

Because of a change in the NASA funding cycle, the present reporting period covers only the six months from March to September 1991. Nevertheless, remarkable progress was made in a number of areas, some of the most noteworthy of which are: (1) Engineering operation of a breadboard CO2 yields O2 demonstration plant that produced over 10 grams of oxygen per day during several runs of over 100 hours each with a single electrolytic cell. Complete automation of controls, monitoring of various inputs/outputs and critical internal variables, diagnostics, and emergency shutdown in an orderly manner were also included. Moreover, 4-cell and 16-cell units, capable of much higher rates of production, were assembled and tested. (2) Demonstration of a 200 percent increase in the carbothermal reduction of ilmenite through vapor deposition of carbon layers on particles of that material. (3) Demonstration of the deposition of strong iron films from carbonyl chemical vapor deposition, establishing the crucial role of additive gases in governing the process. (4) Discovery of an apparent 800 percent increase in the conversion rates of a modified ilmenite simulant in a plasma-augmented reactor, including direct enhancement by solar radiation absorption. (5) Proof that test specimens of lunar soil with small amounts of metallic additives, recrystallized at moderate temperatures, exhibit an improvement of several orders of magnitude in ductility/tensile strength. (6) Experiments establishing the feasibility of producing silicon-based polymers from indigenous lunar materials. (7) Application of CCD technology to the production of maps of TiO2 abundance, defining primary ilmenite deposits, on the disk of the full moon. (8) Attainment of a discovery rate of approximately 3 new near-Earth asteroids per month by Spacewatch, more than doubling the previous global rate. (9) Coordination of industry and university magma electrolysis investigations in a workshop designed to define remaining problem areas and propose critical experiments.

Ramohalli, Kumar↗

Determination of lunar ilmenite abundance from remotely sensed data

Of fundamental importance in the utilization of indigenous resources for a future permanently manned lunar base is the identification and mapping of the abundance distribution of the mineral ilmenite, which is currently considered the most readily identifiable and most easily accessible source of oxygen needed for human consumables and spacecraft propellant. Solid state detector array technology now permits the use of ground based multispectral remote sensing techniques to produce maps with better than one kilometer spatial resolution and uncertainties of about two weight-percent TiO2 abundance. An empirical relationship between the weight-percent abundance of titanium dioxide and the 400/560 nm spectral ratio measured in returned lunar samples was used. Because this abundance correlation is valid only for mature lunar mare regolith, the distribution of immature mafic minerals which were found to be correlated primarily with steep slopes exposing bedrock was qualitatively mapped. The first mapping phase focused on the entire lunar nearside at 5.3 km per pixel, and on experiments with more sensitive spectral ratios. Relative spectrophotometry was employed to aid in identifying wavelengths that provide greater spectral contrast. It was found that the 400/730 nm ratio improved the abundance sensitivity by 37 percent, while the 950/730 nm ratio improved mafic mineral contrast about 100 percent. The second mapping phase utilized a large experimental CCD at 280 m per pixel to map the high titanium regions identified in the phase one mapping. The high resolution maps provide data on the small scale (500 m) variations in abundance and their relationship to morphological units.

Larson, S. M.↗

Oxidation characteristics of Ti-33Al-6Nb-1.4Ta

Static oxidation kinetics of the gamma titanium-aluminide alloy Ti-33Al-6Nb-1.4Ta (wt pct) have been investigated in air from 700 to 1000 C and in oxygen from 800 to 1000 C using thermogravimetric analysis. The oxidation kinetics were controlled by the presence of alumina for all oxygen exposures and in air below 800 C, while the kinetics in air above 800 C were more complex. Oxidation products were identified using X-ray diffraction techniques. Oxide scale morphology was examined by SEM and TEM of the surfaces and across sections of oxidized specimens. The oxidation products formed depended on the exposure: Al2O3 and TiO2 were identified on all specimens exposed in and air and oxygen; the nitride phases TiN and Ti2AlN were also found on specimens exposed in air.

Wallace, T. A.↗

Geochemistry and petrogenesis of proterozoic mafic dykes in north Kerala, southwestern Indian Shield - Preliminary results

Mafic dyke intrusions occur in three distinct orientations ( NNW-SSE and NW-SE and NE-SW) in north Kerala regions, the southwestern part of the Indian Shield. Dating of two NNW-SSE trending dykes by K-Ar method has yielded Middle Proterozoic ages (ca. 1660 Ma and ca. 1420 Ma respectively). Our initial geochemical results on these dyke rocks (0.65-0.15 wt pct K2O, 0.37-0.38 wt pct P2O5, 3.30-1.00 wt pct TiO2, 11-1 p.p.m. Rb, 250-90 p.p.m. Sr, 230-40 p.p.m. Ba, 160-40 p.p.m. Zr, and 30-10 x chondrite rare earth elemental abundances) indicate a transitional character between abyssal and plateau tholeiites. Petrogenetic modelling suggests that the dyke compositions have been derived by different degrees of partial melting of a heterogenous source mantle. The mantle sources with accessory amphibole and/or garnet, variably enriched in LREE and LIL elements, are compatible with the observed geochemical data.

Radhakrishna, T.↗

First oxygen from lunar basalt

The Carbotek/Shimizu process to produce oxygen from lunar soils has been successfully demonstrated on actual lunar samples in laboratory facilities at Carbotek with Shimizu funding and support. Apollo sample 70035 containing approximately 25 percent ilmenite (FeTiO3) was used in seven separate reactions with hydrogen varying temperature and pressure: FeTiO3 + H2 yields Fe + TiO2 + H2O. The experiments gave extremely encouraging results as all ilmenite was reduced in every experiment. The lunar ilmenite was found to be about twice as reactive as terrestrial ilmenite samples. Analytical techniques of the lunar and terrestrial ilmenite experiments performed by NASA Johnson Space Center include iron Mossbauer spectroscopy (FeMS), optical microscopy, SEM, TEM, and XRD. The Energy and Environmental Research Center at the University of North Dakota performed three SEM techniques (point count method, morphology determination, elemental mapping), XRD, and optical microscopy.

Gibson, M. A.↗

The ilmenite liquidus and depths of segregation for high-Ti picrite glasses

Lunar picrite glasses represent primitive and perhaps near primary liquids which have suffered only minor degrees of crystallization or near crustal modification. These glasses are multisaturated with olivine and orthopyroxene at pressures from 20-25 kb. I argue below that high TiO2 mare glasses were indeed equilibrated with orthopyroxene and were segregated from the lunar mantle at mean depths of 400-500 km. The glasses are typically modelled as products of relatively low degrees of melting of an hybridized source resulting from the overturn and mixing of the gravitationally unstable cumulate pile. But the models are neither unique nor, in some cases, correct.

Hess, P. C.↗

Searching for neuKREEP: An EMP study of Apollo 11 Group A basalts

The Apollo 11 and 17 landing sites are characterized by the presence of high-Ti basalts (TiO2 greater than 6 percent). The Group A basalts of Apollo 11 have elevated K compositions (greater than 2000 ppm); and are enriched in incompatible trace elements relative to the other types of high-Ti basalt found in the region. These unique basalts also are the youngest of all high-Ti basalts, with an age of 3.56 +/- 0.02 Ga. Recent modelling of the Apollo 11 Group A basalts by Jerde et al. has demonstrated that this unique variety of high-Ti basalt may have formed through fractionation of a liquid with the composition of the Apollo 11 orange glass, coupled with assimilation of evolved material (dubbed neuKREEP and having similarities to lunar quartz monzodiorite). Assimilation of this material would impart its REE signature on the liquid, resulting in the elevated REE abundances observed. Minerals such as whitlockite which contain a large portion of the REE budget can be expected to reflect the REE characteristics of the assimilant. To this end, an examination of the whitlockite present in the Apollo 11 Group A basalts was undertaken to search for evidence of the neuKREEP material assimilated.

Jerde, Eric A.↗

The history of mare volcanism in the Orientale Basin: Mare deposit ages, compositions and morphologies

The eruptive history of mare basalts in the Orientale Basin has been studied, using Lunar Orbiter 4 high-resolution photographs, Zond 8 photographs, and recently acquired Galileo EM-1 multispectral images. This work represents a refined set of compositional data incorporating the use of a linear mixing model for mare compositions, crater count data, and a comprehensive morphologic analysis of Orientale Basin mare deposits. Evidence for multiple eruptive episodes has been found, with compositions ranging from medium- to high-Ti basalt (less than 4 to greater than 6 wt. percent TiO2). Eruptive styles included flood, rille-forming, and shield-forming eruptions. Impact crater densities of mare units in the Orientale Basin enable determination of the ages of these deposits, using the method of Neukum et al. Earliest eruptions of mare basalt in the basin occurred at greater than or equal to 3.80 Ga and the latest eruptions occurred at about 2.3-2.5 Ga. Hence, mare volcanism occurred over a period of nearly 1.5 Ga.

Kadel, S. D.↗

Consortium study of lunar meteorites Yamato-793169 and Asuka-881757: Geochemical evidence of mutual similarity, and dissimilarity versus other mare basalts

Compositions of bulk powders and separated minerals from two meteorites derived from the mare lava plains of the Earth's Moon, Yamato-793169 and Asuka-881757, indicate a remarkable degree of similarity to one another, and clearly favor lunar origin. However, these meteorites are unlike any previously studied lunar rock. In both cases, the bulk-rock TiO2 content is slightly greater than the level separating VLT from low-Ti mare basalt, yet the Sc content is much higher than previously observed except among high-Ti mare basalts. Conceivably, the Sc enrichment in A881757 reflects origin of this rock as a cumulate from a mare magma of 'normal' Sc content, but this seems unlikely. Mineral-separate data suggest that most of the Sc is in pyroxene, and a variety of evidence weighs against the cumulus hypothesis as a major cause for the high Sc. The remarkable similarity between Y793169 and A881757 suggests the possibility that they were derived from a single source crater on the Moon.

Warren, Paul H.↗

Petrology and geochemistry of VLT glasses from double drive tube 79001/2

As a part of more general studies of soils from Apollo 17 double drive tube 79001/2, glasses from the 79001/2 core are being analyzed by a multidisciplinary approach including SEM/EDS and INAA. Efforts are currently focused on VLT (very low-Ti; TiO2 less than 1 wt%) mare glasses, which are common in 79001/2 and have also been found in other Apollo 17 soils. One of the primary objectives is to determine whether any or all of the Apollo 17 VLT glasses represent pristine volcanic compositions. In addition, the range of VLT glass compositions and possible relationships between the glasses and VLT lithic samples, for which some geochemical data have been obtained previously, is being defined.

Wentworth, Susan J.↗