Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Multi-Timescale Investigation of Radiation Damage near TiO2 Rutile Grain Boundaries

Although grain boundaries (GBs) have been experimentally demonstrated to serve as sinks for absorbing radiation induced defects and improving the radiation tolerance of materials, the detailed atomistic interactions between defects and GBs leading to this enhanced tolerance are not well understood. In oxide ceramics the interactions are further complicated as defects can be charged and grain boundaries may exhibit space charge and charge dipole effects. Here, we use two atomistic modeling methods to examine the role of GBs in a model oxide system, rutile TiO2, in modifying defect production during irradiation events. The GB studied is a symmetric tilt GB with a rotation axis of [100] and a rotation angle of 15.25{sup o}. We use molecular dynamics to investigate defect production near the GB at both 300K and 1000 K and find that the damage production is sensitive to the initial distance of the primary knock-on atom (PKA) from the GB. We find three distinct regimes in which GBs have different effects on modifying defect production. Similar to GBs in metals, the GB absorbs more interstitials than vacancies at certain distances while this behavior of biased loading of interstitials diminishes at other distances. Further, we obtain the statistics of both interstitial and vacancy clusters 2 produced in collision cascades in terms of their compositions at two temperatures. We find that perfectly stoichiometric defect clusters (Schottky and anti-Schottky clusters) represent a small fraction of the total defect clusters produced. Moreover, a significant reduction in the number of interstitial clusters at 1000 K compared to 300 K is thought to be a consequence of enhanced migration of interstitials towards the GB. Finally the kinetic properties of certain defect clusters are investigated with temperature accelerated dynamics, without any priori assumptions of migration mechanisms. We find that small interstitial clusters become mobile at high temperatures while small vacancy clusters do not. Multiple migration pathways exist and are typically complex and non-intuitive. We use this kinetic information to explain experimental observations and predict their long-time migration behavior near GBs.

36 MATERIALS SCIENCE↗

Adsorption States and Mobility of TMAA Molecules on Reduced TiO2(110) Surface

Combined scanning tunneling microscopy (STM), x-rays photoelectron spectroscopy (XPS) and density functional theory (DFT) studies have probed the bonding configurations and mobility of trimethylacetic acid (TMAA) molecules on TiO2(100) surface at RT. Upon TMAA dissociation through deprotonation, two distinctly different types of stable chemisorption configurations of the carboxylate group (TMA) have been identified accordingly to their position and appearance in STM images. In configuration A, two carboxylate O atoms bonds to two Ti4+ cations, while in configuration B one O atom fills the bridging oxygen vacancy (VO) with the other O bounded at an adjacent regular Ti4+ site. Calculated adsorption energies for the configurations A and B are comparable at 1.28 and 1.36 eV, respectively. DFT results also show that TMA may rotate at RT about its O atom that filled the VO (in configuration B), with a rotation barrier of ~0.65 eV. Both the observation of the constant initial sticking coefficient and preference for TMAA molecules to dissociate at selective sites indicate that TMAA adsorption is mediated by a mobile precursor state. Several possible molecular (physisorbed) states of TMAA have indeed been identified by DFT, all being a highly mobile at RT. In contrast, the TMA diffusion in chemisorbed (dissociative) state is a very slow with calculated barrier of 1.09 eV for diffusion along the Ti row.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous TiO2-B Microspheres with Superior Rate Performance for Lithium Ion Batteries

Mesoporous TiO2-B microsperes with a favorable material architecture are designed and synthesized for high power lithium ion batteries. This material, combining the advantages of fast lithium transport with a pseudocapacitive mechanism, adequate electrode-electrolyte contact and compact particle packing in electrode layer, shows superior high-rate charge-discharge capability and long-time cyclability for lithium ion batteries.

25 ENERGY STORAGE↗

Edge Dislocations Induce Improved Photocatalytic Efficiency of Colored TiO2

Titanium oxide is the most widely used material for photocatalytic applications due to its low cost and environmental friendliness. One of the grand challenges to improve its energy conversion efficiency is to utilize more visible light while inhibiting the recombination of photo-generated electrons and holes. We use a one-step hydro-solvothermal method to obtain colored ultra-fine nanowires of rutile and nanoparticles of anatase with edge dislocations, which induced broadened visible solar absorption (400-900 nm) and improved photocatalytic efficiency up to 1.8 times that of rutile or anatase without defects. Enhanced photocatalytic activity of these structures is demonstrated by photodegrading methylene blue measurements under simulated solar light irradiation. Results show the existence of Ti3+, induced by edge dislocations, and subsequent electronic band structure-property relationships. This work highlights a strategy for generating sufficient desired defects in TiO2 nanostructures, leading to broadened visible solar absorption and improved photocatalytic efficiency under visible light irradiation.

Ren, Peng↗

Highly Active TiO2-Based Visible-Light Photocatalyst with Nonmetal Doping and Plasmonic Metal Decoration

A sandwich-structured photocatalyst shows an excellent performance in degradation reactions of a number of organic compounds under UV, visible light, and direct sunlight (see picture). The catalyst was synthesized by a combination of nonmetal doping and plasmonic metal decoration of TiO2 nanocrystals, which improves visible-light activity and enhances light harvesting and charge separation, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of porous TiO2 with wormhole-like framework structure

A fast and reliable synthetic route for preparing contaminant-free porous TiO2 with a wormhole-like framework and close packed macropores is demonstrated based on a sol-gel process involving acid hydrolysis of an alkoxide in the presence of a cationic surfactant. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements have been used to characterize the porous structure and the crystallinity. The XRD patterns, TEM and scanning electron microscopy (SEM) images confirm that these materials have disordered wormhole-like topology with close-packed nearly hexagonal macropores. The mesopore diameters and surface area of titanium dioxide, evaluated from the N2-sorption isotherms, indicate average pore diameters of about 7 and 6 nm and surface areas of about 100 and 335 m2/g, for as-prepared and calcined samples at 400 C.

36 MATERIALS SCIENCE↗

Imaging of Formaldehyde Adsorption and Diffusion on TiO2(110)

Surface reactions of formaldehyde with reduced TiO2(110) surfaces have been studied using variable-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). STM results show that formaldehyde preferably adsorbs on the bridging bonded oxygen (Ob) vacancy (VO) defect site. Bias-dependent STM images show that both the Ti-bound CH2O and the VO-bound CH2O are positioned between the Ob row and the Ti row. The VO-bound formaldehyde rotates at 95 K. It starts to diffuse along the Ob row as –CH2– at ~170 K and starts to diffuse along the Ti row as a molecule at ~215 K. However, the stabilities and the configurations of the Ti-bound and the VO-bound formaldehyde calculated using DFT are not in line with the experimental results. The values of diffusion barriers determined experimentally and theoretically are also different. The discrepancy between the experiment and theory indicates the presence of a complex charge distribution related to the defects.

defects↗

Electron-Scavenging Chemistry of Benzoquinone on TiO2(110)

The chemistry of benzoquinone (BQ) on TiO2(110) was examined using temperature programmed desorption (TPD), electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES). BQ adsorbs mostly molecularly on the clean surface, although EELS demonstrates that electrons from surface Ti3+ sites at oxygen vacancy sites (VO) are readily oxidized by the high electron scavenging ability of the molecule. In contrast, when the surface is covered with water, subsequently adsorbed BQ molecules that scavenge surface electrons also abstract H from surface OHbr groups to form hydroquinone (HQ), which desorbs at ~450 K. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The research was performed using the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Synthesis of Ag-Doped Mesoporous TiO2

Ag-doped mesoporous titanium oxide was prepared using non-ionic surfactants and easily handled titanium precursors, under mild reaction conditions. In contrast to the stabilizing effect of Cd-doping on mesoporous TiO2, Ag-doping was found to significantly destabilize the mesoporous structure.

36 MATERIALS SCIENCE↗

N incorporation, composition and electronic structure in N-doped TiO2(001) anatase epitaxial films grown on LaAlO3(001)

We have investigated the properties of N-doped TiO2 anatase grown by plasma-assisted molecular beam epitaxy on LaAlO3(001) substrates. Phase-pure epitaxial films in which N substitutes for O with no secondary phases formation occur only over a narrow range of fluxes. The N solubility is limited to ~0.2 at. % of the anions and is an order of magnitude lower than that found in N-doped rutile. N substitution for O results in N 2p derived states off the top of the anatase valence band and the associated red shift in the optical bandgap.

36 MATERIALS SCIENCE↗

2-Propanol Dehydration on TiO2(110): The Effect of Bridge-Bonded Oxygen Vacancy Blocking

On 100 K rutile TiO2(110) surfaces with 3.5 0.5 % surface bridge-bonded oxygen vacancies (BBOV’s), propene formation by dehydration of 2-propanol was monitored by temperature programmed desorption (TPD). The BBOV’s were either filled or unfilled when the 2-propanol was dosed. Propene desorption rates exhibit two local maxima, nominally at 350 (LT) and 570 K (HT). The former is not altered by filling BBOV’s while the latter is reduced by factors of 2.5 and 5 when the vacancies are pre-filled with water (H-OH) and alcohol (R-OH), respectively. The HT process is attributed to a reaction of 2-propoxy groups located on surface BBO’s. To account for much of the HT C3H6 yield when BBOV’s are filled before (CH3)2CHOH dosing, we propose a model whereby, during TPD, vacancies form and are filled with 2-propoxy. The factor of two difference between titrating BBOV’s with H2O and alcohols is attributed to stoichiometry; twice as many OH groups form on surface BBO rows when H2O is used so twice as many vacancies are created when OH recombines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Adsorption and Reactions of the Amino Acid Proline on Rutile TiO2(110) Surfaces

The reaction of the amino acid dl-proline is studied over stoichiometric and Ar-ions sputtered (reduced) TiO2(1 1 0) single crystal surfaces by synchrotron High Resolution X-ray Photoelectron Spectroscopy (HRXPS). On the stoichiometric surface proline gives two different species at 300 K: dissociated and zwitterionic. Upon heating the zwitterionic structure is removed first from the surface followed by the dissociated form. The C1s signal for the COO function is found close to 288.5 eV for both forms while the N 1s for the dissociated form is found at 400.0 eV and that of the zwitterionic from close to 401.8 eV. From the attenuation of the Ti 2p signal the surface coverage was estimated less than 1/2 (about 0.35). This smaller coverage than dissociatively adsorbed carboxylic acids on this surface (usually close to 1/2), is attributed to lateral repulsion caused by the ring of adjacent proline molecules adsorbed on five-fold coordinated Ti cations along the [0 0 1] direction. On the reduced surface the amount of zwitterion structure is found two times higher than that on the stoichiometric surface, at 300 K, most likely due to the considerable decrease of the amount of surface oxygen available. The stability of the zwitterionic structure on this surface is however found similar to that found on the stoichiometric surface. In addition, evidence of oxidation of reduced Ti cations upon adsorption at 300 K is noticed and explained as breaking of the carbon-oxygen bond of a fraction of adsorbed proline. Variable temperature HRXPS has been collected and results indicated that proline is more stable on the reduced surface compared to the stoichiometric surface.

43 PARTICLE ACCELERATORS↗

Adsorption of small hydrocarbons on rutile TiO2(110)

Temperature programmed desorption and molecular beam scattering were used to study the adsorption and desorption of small hydrocarbons (n-alkanes, 1-alkenes and 1-alkynes with 1 - 4 carbon atoms of C1-C4) on rutile TiO2(110). We show that the sticking coefficients for all the hydrocarbons are close to unity (> 0.95) at an adsorption temperature of 60 K. The desorption energies for hydrocarbons of the same chain length increase from n-alkanes to 1-alkenes and to 1-alkynes. This trend is likely a consequence of an additional dative bonding of the alkene and alkyne π system to the coordinatively unsaturated Ti5c sites. Similar to previous studies on the adsorption of n-alkanes on metal and metal oxide surfaces, we find the desorption energies within each group (n-alkanes vs. 1-alkenes vs. 1-alkynes) from Ti5c sites increase linearly with the chain length. The absolute saturation coverages of each hydrocarbon on Ti5c sites were also determined. The saturation coverage of CH4, is found to be ~ 2/3 monolayer (ML). The saturation coverages of C2-C4 hydrocarbons are found nearly independent of the chain length with values of ~1/2 ML for n-alkanes and 1-alkenes and 2/3 ML for 1-alkynes. This result is surprising considering their similar sizes.

adsorption↗

Tracking Site-specific C-C Coupling of Formaldehyde Molecules on Rutile TiO2(110)

Direct imaging of site-specific reactions of individual mole-cules as a function of temperature is a long-sought goal in molecular science. Here, we report the direct visualization of molecular coupling of formaldehyde on reduced rutile TiO2(110) surfaces as we track the same set of molecules when the temperature is increased from 75 to 170 K using scanning tunneling microscope (STM). Our recent study showed that formaldehyde preferably adsorbs on bridging-bonded oxygen (Ob) vacancy (VO) defect site. Herein, images from the same area as the temperature is increased show that VO-bound formaldehyde couples with Ti-bound formaldehyde forming a diolate intermediate. Exposure of formaldehyde at room temperature leads to diolate as the majority species on the surface and no VO-bound formaldehyde is observed. The diolate species are the key reaction intermediates in the formation of ethylene reported in previous ensemble-averaged studies.

Environmental Molecular Sciences Laboratory↗

Low-Temperature Reductive Coupling of Formaldehyde on Rutile TiO2(110)

The formation and the coupling of methylene upon dissociation of formaldehyde on reduced TiO2(110) are studied using variable temperature scanning tunneling microscope (STM). In agreement with prior studies, formaldehyde preferably adsorbs to bridging-bonded oxygen vacancy (VO) defect site. VO-bound formaldehyde couples with Ti-bound CH2O forming a diolate species, which appears as the majority visible product on the surface at 300 K. Here, STM images directly visualize another low-temperature coupling reaction channel. Two VO-bound formaldehyde molecules can couple and form Ti-bound species, which desorbs above ~215 K. This coupling reaction heals both the VO sites indicating the formation and the desorption of ethylene. We also directly observed the diffusion of methylene groups to nearby empty VO sites upon dissociation of the C-O bond in VO-bound formaldehyde, which suggests that the ethylene formation is via coupling of the methylene groups. Statistical analysis shows that the total visible reaction products observed on the surfaces can only account for a half of the consumption of the initial VO coverage, which further supports the desorption of the coupling reaction product, ethylene, after formaldehyde exposures at 215 K and 300 K.

Zhu, Ke↗

Intrinsic Diffusion of Hydrogen on Rutile TiO2(110)

The combined experimental and theoretical study of intrinsic hydrogen diffusion on bridge-bonded oxygen (BBO) rows of TiO2(110) is presented. The sequences of isothermal scanning tunneling microscopy images demonstrate a complex behavior of hydrogen formed by water dissociation on BBO vacancies. Different diffusion rates are observed for the two hydrogens in the original geminate OH pair suggesting a presence of long lived polaronic state. For the case of separated hydroxyls, both theory and experiment yield comparable temperature-dependent diffusion rates. The density functional theory calculations show that the lowest energy diffusion path involves a simple hydrogen motion along the BBO from one BBO to its neighbour. The values of kinetic parameters (prefactors and diffusion barriers) determined experimentally and theoretically are significantly different and indicate the presence of a more complex diffusion mechanism. We speculate that the hydrogen diffusion proceeds via two step mechanism, the initial diffusion of localized charge followed by the diffusion of hydrogen. Both experiment and theory show the presence of repulsive OH-OH interactions.

08 HYDROGEN↗

Imaging Hindered Rotations of Alkoxy Species on TiO2(110)

We present the first study of the rotational dynamics of organic species on any oxide surface. Specifically, variable-temperature scanning tunneling microscopy (STM) and dispersion-corrected density functional theory are used to study the alkyl chain conformational disorder and dynamics of 1-, 2-, 3- and 4-octoxy on rutile TiO2(110). Initially, the geminate pairs of the octoxy and bridging hydroxyl species are created via octanol dissociation on bridging-oxygen (Ob) vacancy defects. The STM images provide time averaged snapshots of octoxy species rotating among multiple energetically nearly-degenerate configurations accessible at a given temperature. In the calculations we find that the underlying corrugated potential energy surface is a result of the interplay between attractive Van der Waals dispersion forces leading to weak attractive C...Ti and repulsive C...Ob interactions which lead to large barriers of 50-70kJmol-1 for the rotation of the octoxy alkyl chains across the Ob rows. In the presence of the germinal hydroxyl groups we find that the relative populations of the various conformations as well as the rotational barriers are perturbed by the presence of geminate hydroxyl due to additional C...hydroxyl repulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alcohol Chemistry on Rutile TiO2(110): The Influence of Alkyl Substituents on Reactivity and Selectivity

Product yields and selectivities, based on ultra high vacuum temperature programmed desorption, are compared for ten C2 to C8 aliphatic alcohols dosed at 100 K on highly-ordered TiO2(110) with a 3.5 % concentration of surface oxygen vacancies. Dehydration to form an alkene and water typically dominates while two other channels, dehydrogenation to form aldehydes, and reformation of alcohol, make detectable contributions for primary alcohols. Depending on the alcohol there are two distinct dehydration pathways, one operative at low temperature (LT, 300 to 425 K) and the other at high temperature (HT, 480 to 650 K). The HT dehydration pathway is common, while the LT channel is not observed for tertiary butanol and 3- and 4-octanol. The observed trends are accounted for in terms of the inductive and steric effects of the alkyl substituents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗