SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Performance of auxiliary inlet ejector nozzle with floating inlet doors and floating single hinge trailing edge flaps
A nonlinear procedure for computing the pressure distribution on an airfoil with a trailing edge jet flap is described. The method is not restricted to thin airfoils or shallow jet-deflection angles. Correlation with experiment indicates that the characteristics of the pressure distribution are predicted by the theory, but the effect of entrainment is overpredicted with the entrainment coefficient used.
The use of continuous trailing-edge flaps (CTEFs) for primary flight control of a helicopter main rotor is studied. A practical, optimized bimorph design with Macro-Fiber Composite actuators is developed for CTEF control, and a coupled structures and computational fluid dynamics methodology is used to study the fundamental behavior of an airfoil with CTEFs. These results are used within a comprehensive rotorcraft analysis model to study the control authority requirements of the CTEFs when utilized for primary flight control of a utility class helicopter. A study of the effect of blade root pitch index (RPI) on CTEF control authority is conducted, and the impact of structural and aerodynamic model complexity on the comprehensive analysis results is presented. The results show that primary flight control using CTEFs is promising; however, a more viable option may include the control of blade RPI, as well.
The near and very near wake of thin flat plates with both sharp and circular trailing edges (TEs) are investigated with direct numerical simulations (DNSs). The TE is circular in two of the cases (IN & NS) and sharp in one of them (ST). The separating boundary layers are turbulent in all cases. The objectives of this study are twofold. The first is to explore the effect of significantly reducing Re(sub D) (Reynolds number based on circular TE diameter, D) on the flow in the TE region, and the shedding process (Cases IN and NS). The second is to better understand the reasons underlying the findings of an earlier experimental wake investigation (sharp TE) where (1) the center-line values in normal intensity, and the peak in shear stress profiles in the cross-stream direction, were found to first increase in the streamwise direction (x), from that obtained at the TE, before diminishing further downstream, and (2) a broadband peak was observed in centerline cross-stream velocity (v) spectra (indicating quasi-periodicity, possibly due to vortices or wave-like motions). Case ST from the present study showed a near wake instability resulting in spanwise vortices (with a streamwise component). The instability is intermittent and contributes to both the broadband peak in the v spectrum and the initial increases in normal intensity and shear stress (as in the experiment). Case NS, with the lower value of ReD is an "essentially" non-shedding case where the flow in the TE region continually changes direction (upward/downward) because of turbulence. Case IN, with twice the value of ReD as Case NS, also exhibits a swaying motion in the TE region. In addition, vortex shedding is initiated during periods when the flow direction changes rapidly. Shedding in this case is intermittent. It results in a peak in the v spectrum obtained at the centerline (x/D = 1.0).
Hypersonic flow distribution and separation types over highly swept delta wings with trailing edge flaps at Mach 6
Hypersonic flow distribution and separation types over highly swept delta wings with trailing edge flaps at Mach 6
Unsteady two- and three-dimensional flow structure at leading and trailing edges of bodies can be characterized effectively using recently developed techniques for acquisition and interpretation of flow visualization. The techniques addressed here include: flow image/surface pressure correlations; 3-D reconstruction of flow structure from flow images; and interactive interpretation of flow images with theoretical simulations. These techniques can be employed in conjunction with: visual correlation and ensemble-averaging, both within a given image and between images; recognition of patterns from images; and estimates of velocity eigenfunctions from images.
This work assesses the potential aerodynamic performance benefits of a variable-camber, continuous-trailing-edge flap system on a generic transport aircraft at off-design conditions. A process to optimize transport wings while addressing static aeroelastic effects is presented. To establish a proper baseline, a transport wing is first aerodynamically optimized at a mid-cruise flight condition using an inviscid, aeroelastic analysis tool. The optimized wing is then analyzed at off-design cruise conditions. The optimization is repeated at these off-design conditions to determine how much performance is lost by the wing optimized solely for the mid-cruise condition. The full-span flap system is then adapted to improve performance of the mid-cruise-optimized wing at these off-design conditions. The measured improvement is quantified by a comparison with wings designed specifically for the off-design conditions. To evaluate the effects of aeroelasticity on the effectiveness of the flap system, this entire process is performed on both a conventionally stiff wing and a modern, more flexible wing. The results indicate that the flap system allows for recovery of near-optimal performance throughout cruise. The flap system is found to be advantageous even for modern wings with increased flexibility.
A short annular dump (abrupt flow area change) diffuser was tested with suction through wall trailing-edge slots at inlet Mach numbers of 0.19 and 0.27 and at near ambient inlet temperature and pressure, with suction flow varied from zero to 10 percent of the inlet air mass-flow rate. The overall ratio of diffuser exit area to inlet area was 4.0, and the ratio of length to inlet height was 2.0. By applying suction flow separately on either wall or to both walls simultaneously, the original annular jet profile could be altered to either a hub- or tip-biased profile. Diffuser effectiveness was increased from about 25 percent with no suction to 50 percent at 6 percent outer-wall suction and to 52 percent at a combined suction rate on both walls of 10.25 percent. At the same time, diffuser total pressure loss was reduced by one-fourth.
A detailed experiment on the separated flow field at a sharp trailing edge is described and documented. The separated flow is a result of sustained adverse pressure gradients. The experiment was conducted using an elongated airfoil-like model at a transonic Mach number and at a high Reynolds number of practical interest. Measurements made include surface pressures and detailed mean and turbulence flow quantities in the region just upstream of separation to downstream into the near-wake, following wake closure. The data obtained are presented mostly in tabular form. These data are of sufficient quality and detail to be useful as a test case for evaluating turbulence models and calculation methods.
Calculated and experimental hinge moments on trailing-edge flaps of swept delta wings at hypersonic speeds and positive deflection angles
Indicial aerodynamic influence coefficients were evaluated from potential theory for a thin, flexible wing with supersonic leading and trailing edges only. The analysis is based on the use of small surface areas in which the downwash is assumed uniform. Within this limitation, the results are exact except for the restriction of linearized theory. The areas are not restricted either to square boxes or Mach boxes. A given area may be any rectangle or square which may or may not be cut by the Mach forecone, and any area can be used anywhere in the forecone without loss of accuracy.
The acoustic sources simulating engine or jet noise are located near the trailing edge. During landing or take-off operations the flap angle is not small. Solutions for the scattering of the acoustic sources, monopoles, dipoles or quadrupoles, by the wing with the flap at finite angle are constructed for the case that the acoustic wave length is much larger than the length of the flap but may be of the same order as the chord. For each given geometry of the flap and the position of the singularities, critical orientations of the dipoles and the quadrupoles are defined along which the noise becomes 'suppressed', i.e., the far field pressure becomes one order smaller.
The aerodynamic effects of spanwise blowing on the trailing edge flap of an advanced fighter aircraft configuration were determined in the 4 by 7 Meter Tunnel. A series of tests were conducted with variations in spanwise-blowing vector angle, nozzle exit area, nozzle location, thrust coefficient, and flap deflection in order to determine a superior configuration for both an underwing cascade concept and an overwing port concept. This screening phase of the testing was conducted at a nominal approach angle of attack from 12 deg to 16 deg; and then the superior configurations were tested over a more complete angle of attack range from 0 deg to 20 deg at tunnel free stream dynamic pressures from 20 to 40 lbf/sq ft at thrust coefficients from 0 to 2.
This is the presentation to follow conference paper of the same name. The adaptive compliant trailing edge (ACTE) flap experiment safety of flight requires that the flap to wing interface loads be sensed and monitored in real time to ensure that the wing structural load limits are not exceeded. This paper discusses the strain gage load calibration testing and load equation derivation methodology for the ACTE interface fittings. Both the left and right wing flap interfaces will be monitored and each contains four uniquely designed and instrumented flap interface fittings. The interface hardware design and instrumentation layout are discussed. Twenty one applied test load cases were developed using the predicted in-flight loads for the ACTE experiment.
Three dimensional pressure distribution functions for lifting surfaces with trailing-edge controls based on integral equations for subsonic flow
In this study, we have extended our correction method for transonic aerodynamics to baseline and variable camber continuous trailing edge (VCCTEF) geometries of super-critical airfoils at cruise conditions. This correction method modifies Theodorsen theory, which is based on incompressible potential flow over a flat plate. The method is partly based on CFD RANS simulations of oscillating NASA generic transport model (GTM) baseline cruise and VCCTEF airfoil geometries in pitch and shows promise for addressing transonic flutter problems of aeroelasticity. In the earlier study1, the Theodorsen functions were modulated with non-linear functions of Mach number, M, and reduced frequency, k, and thus the correction was demonstrated for the symmetrical NACA0012 airfoil. In the present study, the modulation functions are also allowed to account for the effects of camber and thickness of the airfoil. This is demonstrated by applying the correction method to various symmetric NACA00xx airfoil geometries (NACA001, NACA0002, NACA0012, NACA0015 and NACA0018), the NASA GTM super-critical baseline and VCCTEF airfoil geometries, e.g., the circular airfoil, VCCTEF222. First results indicate that the correction method accounts for a large variation of thickness of airfoils and camber. The present correction method will guide the development of a new state space model for the VCCTEF system and eventually a new transfer function that will be incorporated in a new aeroelastic framework leading to an appropriate transonic flutter model for use in the future aircraft systems in development under the NASA Advanced Air Transportation Technologies (AATT) project.
A method based on integral techniques is presented to determine the turbulent separation location and separation pressure for trailing edge stall airfoils exhibiting extensive separated flow regions during prestall and poststall conditions. The method and experimental laser velocimetry data in the turbulence amplification region are used to establish a relationship between fluctuating velocity components and mean velocity in the boundary layer. The method is demonstrated for symmetrical, cambered, conventional and supercritical airfoils in the 5-to-21-percent thickness ratio range, and over a Reynolds number range of 2 to 22 million. Good agreement with experimental data is found, and the method is used in conjunction with the NASA Multi-Component Airfoil Computer Program to predict maximum L/D ratios and maximum section/lift coefficients.