SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The objective of the study was to generate the system design of a performance-optimized, advanced LOX/hydrogen expander cycle space engine. The engine requirements are summarized, and the development and operational experience with the expander cycle RL10 engine were reviewed. The engine development program is outlined.
The engine requirements are emphasized and include: high specific impulse within a restricted installed length constraint, long life, multiple starts, different thrust levels, and man-rated reliability. The engine operating characteristics and the major component analytical design are summarized.
The engine operating characteristics were examined. Inlet pressure effects, tank pressurization effects, steady-state specific impulse, and the steady-state cycle were studied. The propellant flow schematic and operating sequence are presented. Engine hardware drawings are included.
A new method for utilizing the upper atmosphere to modify earth orbital trajectories through use of a pressure supported drag brake has been previously proposed. Analytical results and initial wind tunnel test data indicate that there is considerable improvement available to the original aerobraking concept. Optimization of the drag brake with respect to size versus structural heating, and the application of more advanced cooling techniques, indicates that reductions in weight and volume of the aerobraking system by 50 percent should be possible. Additional analysis indicates that further improvements might be available through use of a alternate drag control mode which eliminates the need to throttle the vehicle main engine during the aerobraking maneuver.
A system alternative to pressurization for providing net positive suction pressure (NPSP) to the main engine of a low-thrust cryogenic stage has been conceptually designed and analyzed. Thermal subcoolers (heat exchangers) provide required NPSP levels by using throttled vent fluid to subcool propellant delivered to the engine. The study analyzed and sized subcoolers that provide NPSP levels of 0.5 to 12.0 psi for liquid oxygen, liquid hydrogen, and liquid methane propellants. The study was part of an overall investigation to compare pressurization and other methods of providing NPSP for low-thrust vehicles.
Explore the source record for details and available documents.
Design considerations of an on going research project for developing an effective and easy to use tool system that supports entire maintenance phases are introduced. The primary focus is the design of an intelligent user interface mechanism. By analyzing why existing tools and tool systems are not used very effectively, we can define user requirements for the user interface mechanisms, specify design criteria of user interface functions, and introduce some features of the implementation. Because this project is still in process, intermediate evaluation and expected effectiveness are discussed.
A Shuttle-compatible systems design based on the core concept of attachable modules for the major vehicle components is proposed. The principal features include a disposable cargo/extra-propellant tank module; a porous, radiative, backscattering drag-brake surface material of thin silica cloth; and a lightweight carbon-composite support structure. The mission payload capability for delivery, retrieval, and combined operations is determined for a broad range of missions including NASA/DOD requirements and extending through cis-lunar space. The effects of finite-rate surface catalysis, negative lift, and multiple atmospheric passes in reducing the aerothermal heating rates are also investigated. In addition, the structural and thermal-protection problems of the drag-brake support apparatus are analyzed and recommendations are proposed for future design refinements.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Various main propulsion system configurations of an advanced OTV are evaluated with respect to the probability of nonindependent failures, i.e., engine failures that disable the entire main propulsion system. Analysis of the life-cycle cost (LCC) indicates that LCC is sensitive to the main propulsion system reliability, vehicle dry weight, and propellant cost; it is relatively insensitive to the number of missions/overhaul, failures per mission, and EVA and IVA cost. In conclusion, two or three engines are recommended in view of their highest reliability, minimum life-cycle cost, and fail operational/fail safe capability.
The computer code ARCFLO II was used as a guide to increase the performance of the Interaction Heating Facility at Ames Research Center. A closed-form scaling law relation was derived that provides an understanding of the factors that affect enthalpy in the constricted-arc heater. From a study of this scaling law, it is concluded that at constant pressure, enthalpy is proportional to current density raised to the 0.60 power for current densities from 80 to 150 A/sq cm. At constant current density, enthalpy is inversely proportional to pressure to the nth power, where n varies from 0.14 to 0.43, depending on the current density. Radiative heat losses are responsible for the falloff in performance at combinations of high current density and high pressure. An analytical, closed form scaling law based on a constant-temperature arc-core model agrees qualitatively with the scaling law deduced from ARCFLO II.
Vehicle includes airbrake for deceleration into lower orbit. Report describes vehicle for carrying payloads between low and high orbits around Earth. Vehicle uses thin, upper atmosphere for braking when returning to low orbit. Since less propellant needed than required for full retrorocket braking, vehicle carries larger payload and therefore reduces cost of space transportation.
Systems requirements for design-optimized, lateral-turn performance were determined for reusable, space-based applications and low-Earth orbits involving large multiple plane-inclination changes. The aerothermodynamic analysis is the most advanced available for rarefield-hypersonic flow over lifting surfaces at incidence. The effects of leading-edge bluntness, low-density viscous phenomena, and finite-rate flow-field chemistry and surface catalysis are accounted for. The predicted aerothermal heating characteristics are correlated with thermal-control and flight-performance capabilities. The mission payload capacity for delivery, retrieval, and combined operations was determined for round-trip sorties extending to polar orbits. Recommendations are given for future design refinements. The results help to identify technology issues required to develop prototype operational vehicles.
Systems requirements for design-optimized, lateral-turn performance were determined for reusable, space-based applications and low-earth orbits involving large multiple plane-inclination changes. The aerothermodynamic analysis is the most advanced available for rarefied-hypersonic flow over lifting surfaces at incidence. The effects of leading-edge bluntness, low-density viscous phenomena, and finite-rate flow-field chemistry and surface catalysis are accounted for. The predicted aerothermal heating characteristics are correlated with thermal-control and flight-performance capabilities. The mission payload capacity for delivery, retrieval, and combined operations was determined for round-trip sorties extending to polar orbits. Recommendations are given for future design refinements. The results help to identify technology issues required to develop prototype operational vehicles.
The orbital servicing concepts developed for several existing and planned spacecraft are reviewed to illustrate the evolution and capabilities of Shuttle-based support services, and the potential range of future services are categorized by several criteria including transportation systems requirements, supporting facilities and equipment options, and servicing locations. Implications of Space Station-basing the services are described, along with possible implementing systems. In particular, the technique of 'formation flying' by means of which spacecraft may be physically isolated from each other while maintaining reasonable propellant requirements for maneuvers between them is explored by representative examples. OTV mission support is described as an evolutionary augmentation of the basic Space Station services.
A simplified retrieval strategy for compiling automation-related bibliographies from NASA/RECON is presented. Two subsets of NASA Thesaurus subject terms were extracted: a primary list, which is used to obtain an initial set of citations; and a secondary list, which is used to limit or further specify a large initial set of citations. These subject term lists are presented in Appendix A as the Automated Technology Knowledge Base (ATKB) Thesaurus.