Search NASA⌕ Search

SEARCH · Search NASA

Results for “Turbulent boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Characteristics of Mach 10 transitional and turbulent boundary layers

Measurements of the mean flow properties of transitional and turbulent boundary layers in helium on 4 deg and 5 deg wedges were made for flows with edge Mach numbers from 9.5 to 11.3, ratios of wall temperature to total temperature of 0.4 to 0.95, and maximum length Reynolds numbers of one hundred million. The data include pitot and total temperature surveys and measurements of heat transfer and surface shear. In addition, with the assumption of local similarity, turbulence quantities such as the mixing length were derived from the mean flow profiles. Low Reynolds number and precursor transition effects were significant factors at these test conditions and were included in finite difference boundary layer predictions.

Watson, R. D.↗
NASA NTRS1987

Flowfield measurements in a separated and reattached flat plate turbulent boundary layer

The separation and reattachment of a large-scale, two-dimensional turbulent boundary layer at low subsonic speed on a flat plate has been studied experimentally. The separation bubble was 55 cm long and had a maximum bubble thickness, measured to the height of the mean dividing streamline, of 17 cm, which was twice the thickness of the inlet boundary layer. A combination of laser velocimetry, hot-wire anemometry, pneumatic probing techniques, and flow visualization were used as diagnostics. Principal findings were that an outer inviscid rotational flow was defined which essentially convected over the blockage associated with the inner, viscously dominated bubble recirculation region. A strong backflow region in which the flow moved upstream 100 percent of the time was measured near the test surface over the central 35 percent of the bubble. A laminar backflow boundary layer having pseudo-turbulent characteristics including a log-linear velocity profile was generated under the highly turbulent backflow. Velocity profile shapes in the reversed flow region matched a previously developed universal backflow profile at the upstream edge of the separation region but not in the steady backflow region downstream. A smoke flow visualization movie and hot-film measurements revealed low frequency nonperiodic flapping at reattachment. However, forward flow fraction data at reattachment and mean velocity profiles in the redeveloping boundary layer downstream of reattachment correlated with backward-facing step data when the axial dimension was scaled by the distance from the maximum bubble thickness to reattachment.

Patrick, William P.↗
NASA NTRS1983

An experimental study of surface curvature effects on a supersonic turbulent boundary layer

The mean flow results of an experimental study of compressible turbulent boundary layers in an adverse pressure gradient with and without surface curvature effects are presented. The test was conducted in an axisymmetric flow facility. The upstream Reynolds number based on boundary layer momentum thickness was 5884 and the boundary layer thickness was 0.90 cm. The curvature effects were examined by studying two flows with essentially identical adverse pressure gradients. One flow was along a concave compression surface test section, while the other was along a straight-walled test section. Mean flow measurements included wall static pressure distributions, wall temperatures, pitot pressure profiles and total temperature profiles. The mean flow results indicated that the surface curvature resulted in a definite increase of turbulent mixing in the boundary layer.

Chou, J. H.↗
NASA NTRS1950

Investigations of the wall-shearing stress in turbulent boundary layers

Because of the unsatisfactory state of knowledge concerning the surface shearing stress of boundary layers with pressure gradients, the problem is re-examined. It is found that for general turbulent boundary layers in wall proximity, that is, in the laminar sublayer, in the transition zone and in the part of the completely turbulent zone near the wall, the same universal law applies as for the plate flow.

BOUNDARY LAYER, TURBULENT - WALLS↗
DOE OSTI2022

Internal energy balance and aerodynamic heating predictions for hypersonic turbulent boundary layers

The elemental equation governing heat transfer in aerodynamic flows is the internal energy equation. For a boundary layer flow, a double integration of the Reynolds-averaged form of this equation provides an expression of the wall heat flux in terms of the integrated effects, over the boundary layer, of various physical processes: turbulent dissipation, mean dissipation, turbulent heat flux, etc. Recently available direct numerical simulation data for a Mach 11 cold-wall turbulent boundary layer allows a comparison of the exact contributions of these terms in the energy equation to the wall heat flux with their counterparts modeled in the Reynolds-averaged Navier-Stokes (RANS) framework. Various approximations involved in RANS, both closure models as well as approximations involved in adapting incompressible RANS models to a compressible form, are assessed through examination of the internal energy balance. There are a number of potentially problematic assumptions and terms identified through this analysis. Here, the effect of compressibility corrections of the dilatational dissipation type is explored, as is the role of the modeled turbulent dissipation, in the context of wall heat flux predictions. The results indicate several potential avenues for RANS model improvement for hypersonic cold-wall boundary-layer flows.

42 ENGINEERING↗
NASA NTRS1974

Measurement and correlation of aerodynamic heating to surface corrugation stiffened structures in thick turbulent boundary layers

The flow conditions for which heating distributions were measured on corrugated surfaces and wavy walls in turbulent boundary layers are shown, along with the ratio of the displacement thickness to the roughness height versus the local edge Mach number for an equivalent smooth surface. The present data are seen to greatly extend the range of data available on corrugated surfaces in turbulent boundary layers. These data were obtained by testing fullscale corrugation roughened panels in the wall boundary layer of a supersonic and hypersonic wind tunnel. The experimental program used to obtain the data is described. The data are analyzed and correlated in terms of the pertinent flow and geometric parameters. The developed correlations are compared with the available thin boundary layer data, as well as with previously published correlation techniques.

Brandon, H. J.↗
NASA NTRS1986

Coherent structures in a turbulent boundary layer. I - Generation of 'artificial' bursts

In an effort to better understand the physics and structure of coherent events in a turbulent boundary layer, an attempt is made to produce 'artificial' bursts. These are generated in a turbulent boundary layer developed on a flat plate towed in an 18 m water channel and thus with negligible freestream turbulence. The burstlike events are produced by either withdrawing near-wall fluid from two minute holes separated in the spanwise direction or by pitching a miniature delta wing that is flush-mounted to the wall. Either of these two actions generates a hairpinlike vortex and low-speed streak that resemble naturally occurring structures. The resulting sequence of events that occur at a given location can be uniquely controlled, thus allowing detailed examination via phase-locked measurements and flow visualization. In this paper, the proof of concept of artificial burst generation is established by comparing the artificial events with natural, random bursts using flow visualization and hot-film signals.

Gad-El-hak, M.↗
NASA NTRS1972

Prediction of local and integrated heat transfer in nozzles using an integral turbulent boundary layer method

An empirical modification of an existing integral energy turbulent boundary layer method is proposed in order to improve the estimates of local heat transfer in converging-diverging nozzles and consequently, provide better assessments of the total or integrated heat transfer. The method involves the use of a modified momentum-heat analogy which includes an acceleration term comprising the nozzle geometry and free stream velocity. The original and modified theories are applied to heat transfer data from previous studies which used heated air in 30 deg - 15 deg, 45 deg - 15 deg, and 60 deg - 15 deg water-cooled nozzles.

Boldman, D. R.↗
NASA NTRS1984

The effect of a short region of concave curvature on a supersonic turbulent boundary layer

Mean flow measurements have been made in a supersonic turbulent boundary layer experiencing a short region of concave curvature and an adverse pressure gradient. The incoming boundary layer had a Mach number of 2.87 and a unit Reynolds number of 6.3 x 10 to the 7th/m. Flow over constant radii curvatures of delta (0)/R = 0.10 and 0.02 with a fixed turning angle of 8 deg were investigated. Results indicate that both flows remain two-dimensional; length scales increase over their equilibrium values; the mean flow behaves similarly to subsonic flows experiencing concave curvature and lateral divergence; and boundary layer behavior is strongly similar to a corresponding 8 deg ramp flow.

Smits, A. J.↗