Search NASA⌕ Search

SEARCH · Search NASA

Results for “UO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Grain subdivision and structural modifications by high-energy heavy ions in UO 2 with different initial grain size

Irradiation with 84 MeV Xe ions at peak fluence above 7 × 10 17 ions/cm 2 has been carried out on two UO 2 samples with different initial grain sizes at 300 °C and 500 °C. Characterization of both grain structure and bubble morphology has been performed using transmission electron microscopy, image analysis and precession electron diffraction. The bubble size in the large-grained sample was smaller than that in the standard-grain sample, confirming fission gas precipitation resistance in the former. The ion irradiation in the high electronic energy deposition range has caused formation of a large density of dislocations which resulted in grain polygonization for the sample with standard grain size, which was observed in multiple lamellas extracted next to each other at peak dose. The sample with large grains showed inconsistent behavior. In one case, dislocation pile-up occurred, but no sub-grain formation was observed. An adjacent location showed sub-grain formation, even if to less extent compared to the standard grain-size sample. Furthermore, these findings suggest a limited polygonization resistance in large-grained UO 2 compared to standard-grain UO 2 . Recrystallization of both sample surfaces was present, leaving unclear if this is a surface effect or a consequence of the highest energy deposition rate in this area.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

UO 2 -liquid metal suspension fuel concept for enhanced passive safety of LWRs: A heat pipe case study

This work proposes a novel fuel concept for use in light-water type reactors (LWRs): UO 2 particles suspended in a low-melting-point liquid metal (LM). This new fuel form offers lower energy density and higher thermal conductivity, thus enhancing the fuel’s thermal performance compared to sintered UO 2 pellets. Two candidate alloys for the LM are proposed based on previous studies into accident-tolerant fuels: Bi-Pb-Sn and Pb-Sn. Ten research questions are provided to guide future development of this fuel. A simple heat pipe model was constructed by coupling a reactor physics code to a heat transport code and other physics modules. Scoping calculations were performed on this model core as a preliminary investigation into five of the research questions. A fuel with 13 wt% UO 2 was shown to maintain a steady-state peak coolant channel wall temperature below 400 °C, and maintain criticality via self-regulating reactivity feedback. Shortcomings of the present model are discussed in this work, along with proposed future model improvements and fuel development. The appendix provides an example of a reactor concept that could be developed to utilize this fuel, but more modeling and experimental work are needed before a full reactor concept can be developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Sensitivity of UO 2 fuel performance to microstructural evolutions driven by dilute additives

Use of dilute additives to nuclear fuel is being considered to increase the security of commercial fuel management through traceability of fabricated fuel elements. Taggants, as additives are denoted when included for traceability purposes, may also improve fuel performance, as demonstrated in Cr-containing uranium dioxide as described in the literature, and they may also improve fuel safety. In fact, studies have shown that some additives affect fuel material properties such as grain size and density after sintering. Given the possible range of elements that could be used as additives, the impact of such fuel property variations on the fuel’s thermomechanical behavior becomes relevant. These effects can be evaluated through a sensitivity study of standard fuel models to analyze changes in these properties using a fuel performance code. In this work, the BISON code is being used to investigate these effects through a 2D axisymmetric model of smeared UO 2 fuel pellets and ZIRLO® cladding under realistic pressurized water reactor core irradiation conditions. Here, randomly sampled densities and grain sizes within specified ranges are used as input parameters in the simulations, and several fuel model-related outputs are evaluated. The thermomechanical response of the cladding is also addressed in this study. The simultaneous variation of both input parameters offers a more comprehensive path to identify key sensitivities. Outputs explored include temperature, fission gas release, creep, and radial stress. Results show that although most of these outputs are sensitive to grain size to a certain extent, density mainly affects fuel temperature and elastic strain. Furthermore, sensitivities can vary depending on the radial position within the fuel pellet.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Core design and performance of the Westinghouse lead fast reactor with UO 2 and MOX configurations

For this work, Westinghouse partnered with Argonne National Laboratory to design, model and optimize UO 2 - and MOX-fueled core designs for a medium size (950 MWt) Lead Fast Reactor that was pursued by Westinghouse. Using Argonne’s suite of reactor analysis codes together with Westinghouse fuel cost economic models, thousands of candidate cores were considered to achieve the economics-optimized cores presented in this paper. This optimization process considered detailed reactor physics, fuel performance, transient performance, and fuel economics models. The reactor performance of the resulting optimized UO 2 - and MOX-fueled core designs are described and compared in this paper. Both cores show fuel performance and transient behavior that is considered acceptable for the optimization presented herein, while further testing campaigns on material performance in high-temperature liquid lead will be required to confirm acceptability at the operating conditions chosen. A multi-batch strategy was selected for the UO 2 core for best fuel utilization with minimum fuel inventory costs. A single-batch fuel management was instead selected for the MOX core to maximize cycle length and minimize the impact of the longer refueling outage resulting from the higher decay heat of the discharged MOX fuel relative to the discharged UO 2 fuel, requiring a longer cooling time before dry-lift of discharged fuel could take place.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Irradiation-enhanced Interactions at UO 2 /Al 2 O 3 /Al Interfaces

Combustion synthesis is used to prepare thin UO 2 films on aluminum alloy substrates. This simple preparation method involves electrospraying uranyl nitrate + acetylacetone + 2-methoxyethanol solution on the substrate, followed by a short annealing at 350 or 550 °C. The irradiation of films with a 40 Ar 2+ ion beam (energy of 1.7 MeV and fluences of 7.7 × 10 16 and 1.3 × 10 17 ions/cm 2 ) is conducted to investigate irradiation-induced restructuring processes. High-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) investigations show that the annealing temperature significantly influences the crystallinity and stability of materials during irradiation. A small amount of Mg in the alloy substrate diffuses into the amorphous Al 2 O 3 interfacial layer between the film and the substrate. Local thermal spikes from the incoming ions facilitate the irradiation-induced mixing of immiscible Al 2 O 3 and UO 2 for the materials prepared at 350 °C. This mass diffusion produces relatively large cavities at the interface. Selective diffusion of a more significant amount of Mg for the materials prepared at 550 °C suppresses the mixing of the Al 2 O 3 interlayer with the film but forms Mg y U 1–y O 2±x solid solutions during irradiation. Local thermal heating triggers the precipitation of a discontinuous crystalline MgO layer close to the film surface. As a result, the enhanced and selective diffusion of Mg into the film makes the materials prepared at 550 °C more robust and mechanically stable than those prepared at 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

An Atomic-Scale Understanding of UO 2 Surface Evolution during Anoxic Dissolution

Our present understanding of surface dissolution of nuclear fuels such as uranium dioxide (UO 2 ) is limited by the use of non-local characterization techniques. In this paper, we discuss the use of state-of-the-art scanning transmission electron microscopy (STEM) to reveal atomic–scale changes occurring to UO 2 thin films subjected to anoxic dissolution in deionised water. No amorphisation of the UO 2 film surface during dissolution is observed, and dissolution occurs preferentially at surface reactive sites that present as surface pits which increase in size as the dissolution proceeds. Using a combination of STEM imaging modes, energy-dispersive X-ray spectroscopy (STEM-EDS), and electron energy loss spectroscopy (STEM-EELS), we investigate structural defects and oxygen passivation of the surface that originates from the filling of the octahedral interstitial site in the centre of the unit cells and its associated lattice contraction. Taken together, our results reveal complex pathways for both the dissolution and infiltration of solutions into UO 2 surfaces.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Irradiation-Driven Restructuring of UO 2 Thin Films: Amorphization and Crystallization

Combustion synthesis in uranyl nitrate–acetylacetone–2-methoxyethanol solutions was used to deposit thin UO 2 films on aluminum substrates to investigate the irradiation-induced restructuring processes. Thermal analysis revealed that the combustion reactions in these solutions are initiated at ~160 °C. The heat released during the process and the subsequent brief annealing at 400 °C allow the deposition of polycrystalline films with 5–10 nm UO 2 grains. The use of multiple deposition cycles enables tuning of the film thicknesses in the 35–260 nm range. Irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of up to 1 × 10 17 ions/cm 2 ) is utilized to generate a uniform distribution of atomic displacements within the films. X-ray fluorescence (XRF) and alpha-particle emission spectroscopy showed that the films were stable under irradiation and did not undergo sputtering degradation. X-ray photoelectron spectroscopy (XPS) showed that the stoichiometry and uranium ionic concentrations remain stable during irradiation. The high-resolution electron microscopy imaging and electron diffraction analysis demonstrated that at the early stages of irradiation (below 1 × 10 16 ion/cm 2 ) UO 2 films show complete amorphization and beam-induced densification (sintering), resulting in a pore-free disordered film. Prolonged irradiation (5 × 10 16 ion/cm 2 ) is shown to trigger a crystallization process at the surface of the films that moves toward the UO 2 /Al interface, converting the entire amorphous material into a highly crystalline film. This work reports on an entirely different radiation-induced restructuring of the nanoscale UO 2 compared to the coarse-grained counterpart. The preparation of thin UO 2 films deposited on Al substrates fills an area of national need within the stockpile stewardship program of the National Nuclear Security Administration and fundamental research with actinides. Here, the method reported in this work produces pure, robust, and uniform thin-film actinide targets for nuclear science measurements

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A molecular dynamics survey of grain boundary energy in uranium dioxide and cerium dioxide

Uranium dioxide (UO 2 ) is the primary fuel material that is used in current nuclear reactors. As one of the most fundamental material parameters, grain boundary (GB) energy strongly influences many fuel properties, and the influences depend on the characters and properties of individual GBs. Using molecular dynamics simulations, a high throughput survey of GB energy in UO 2 was carried out for the purpose of elucidating the roles of GB geometry such as misorientation and inclination, as well as the bonding nature of UO 2 , in affecting GB energy. GB energies in CeO 2 were calculated as well for comparison with UO2toinvestigate the generality of GB energy anisotropy in fluorite phase oxides. The results show significant GB energy anisotropy in both UO 2 and CeO 2 that is associated with the cubic symmetry of the fluorite structure. More interestingly, the GB anisotropy is found to be dependent not only on the crystal structure but also the ionic bonding. As such, the GB energy anisotropy in fluorite oxides has significant differences compared with that in fcc metals. We report that the data obtained and the increased knowledge on GB anisotropy will facilitate GB engineering for nuclear fuels with improved properties

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

ATF material model development and validation for priority fuel concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the Bison fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on the focus was on U 3 Si 2 fuel and FeCrAl cladding as part of a high impact problem through the Nuclear Energy and Advanced Modeling Simulation (NEAMS) program. Then, developments for Cr 2 O 3 -doped UO 2 fuel, and SiC-SiC and Cr-coated zirconium-based claddings began based upon industry interests. In late fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors (CASL) took over further ATF work in Bison in support of the Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC identified their list of priority fuel and cladding concepts, which included Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and Cr-coated zirconium-based and FeCrAl claddings. In particular, the NRC suggested that reports similar in form to NUREG/CR-7024 [1] that was developed for traditional LWR materials UO 2 and zirconium-based claddings (i.e., Zircaloy-4, M5®, ZIRLO) be created for the priority ATF concepts. The approach to ATF capability development in Bison since the beginning has been two-fold: (1) empirical correlations and (2) multiscale model development. Both approaches have uncertainty inherent to them. Uncertainty in empirical correlations is bounded by the experimental data upon which with the correlation was developed. Models developed through a multiscale approach have uncertainty associated with the lower length scale calculations and input parameters that must be propagated to the engineering scale model in Bison. In this report, the recommended models, their range of applicability (e.g., temperature, burnup), and associated uncertainty for the NRC priority fuel concepts Cr 2 O 3 -doped UO 2 and U 3 Si 2 are presented in a manner similar to the aforementioned NUREG. In addition, the Cr 2 O 3 -doped UO 2 models are validated to the Halden Reactor tess IFA-677.1 rods 1 and 5 and IFA-716.1 rod 1. For U 3 Si 2 the models are validated to the recent post-irradiation examination (PIE) data ATF-13 and ATF-15 rods that were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory. Finally, an uncertainty quantification (UQ) and sensitivity analysis (SA) is completed on a single rod for each fuel concept that takes into account the defined uncertainty in select models. The results of the UQ and SA analyses indicate that given the large uncertainty in some of the input ATF models that the uncertainty on the Bison predictions of fuel performance metrics of interest bound the available experimental data. Correlation coefficients are also reported that identified the uncertain inputs with the strongest correlation (positive or negative) with the outputs of interest. Fuel performance metrics investigated include fuel elongation, rod internal pressure, fuel centerline temperature, and fission gas release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

BISON Development and Validation for Priority LWR-ATF concepts

Over the years, the Nuclear Energy Advanced Modeling and Simulation (NEAMS) (2015-2018, 2020) and Consortium for Advanced Simulation of Light Water Reactors (CASL) (2019) programs have provided support for development of Accident Tolerant Fuel (ATF) material models in the BISON fuel performance code. Since the beginning, the goal has been to utilize a multiscale modeling approach to gain a physical understanding of the fuel concepts of interest and to develop mechanistic models in the absence of a large amount of experimental data. This work builds upon that of previous years. In particular we present newly updated fission gas release models for both gas behavior in Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and a new creep model for U 3 Si 2 . The validation exercises completed last year are revisited with the latest models and the results updated. A brief summary of recent modeling activities for FeCrAl cladding is also provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

BISON microstructure-based pulverization criterion in high burnup structure

To improve the economics of commercial nuclear power production, utilities are seeking to increase the allowable burnup limit of UO$_2$ fuel. One of the main factors that contributes to the current burnup limit of 62 GWd/MTU in commercial light water reactors (LWRs) is the risk of fine fragmentation or pulverization during a loss of coolant accident (LOCA). Pulverization primarily occurs at high burnups, especially when the high burnup structure (HBS) has formed. To allow the industry to pursue increased burnup and develop mitigation strategies, it is essential to have improved capability to predict the onset of pulverization. However, the mechanism of pulverization is not well understood, and the existing predictive capabilities implemented in the BISON fuel performance code are empirical in nature. In this report, mesoscale simulations are used to improve understanding of the formation mechanism of the HBS and how it responds during a LOCA transient, and inform development of a BISON pulverization criterion. A phase-field model was used to simulate the evolution of bubble pressure as a result of HBS formation. The simulations showed that gas atoms diffuse from grain interiors to the new grain boundaries created during HBS formation, and diffuse rapidly along these grain boundaries to reach existing bubbles. This causes an increase in bubble pressure in existing bubbles, leading to bubble growth during steady-state operation. To simulate the response of HBS bubbles to a LOCA transient, a newly developed phase-field model was used; in agreement with preliminary results from FY20, bubble size did not change significantly during the duration of the transient. A phase-field fracture model was used to study fragmentation patterns in the HBS, including using input from the phase-field model as initial conditions. Phase-field fracture simulations were used to determine a pulverization criterion for BISON. A function for the critical pressure for pulverization to occur was fit to data from the phase-field fracture simulations, and this function was implemented as a material property in BISON. For comparison, an analytical criterion for pulverization was developed and implemented within the same material property.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Multiscale Modeling of Cr 2 O 3 -doped UO 2 Creep and Fracture

The pursuit of UO 2 fuel with various dopants (e.g., Cr 2 O 3 , Al 2 O 3 ) for improved accident tolerance due to larger grain sizes and suspected reductions in fission gas release and creep requires advanced modeling and simulation tools. These tools enable rapid multiscale development and understanding of material behavior in regimes where experimental measurements may be lacking. This work builds upon previous multiscale modeling efforts for fission gas behavior of Cr 2 O 3 -doped UO 2 to begin looking at the effects of dopants on mechanical properties with a particular focus on creep and fracture. The results indicate that dislocation climb is the most dominate creep mechanism at almost all temperatures with sensitivity analyses further providing evidence in support of that claim. Limited experimental data from the Advanced Fuels Campaign (AFC) program in the U. S. Department of Energy on tensile strength of Cr 2 O 3 -doped UO 2 indicates that fracture may be less severe in doped specimens. The results on creep and fracture are preliminary given the large uncertainty associated with the models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Integral Experiment Request 523 Feasibility Study (Summary Report)

This report documents the feasibility phase of the Critical Experiment Design (CED) conducted as part of integral experiment request (IER) 523. The purpose of IER-523 is to explore the effects of using 35 weight percent enriched uranium dioxide-beryllium oxide (UO 2 -BeO) material on critical configurations using the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories (Sandia). Preliminary experiment design concepts, neutronic analysis results, and proposed paths for continuing the CED process are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

NCSP Integral Experiments at Sandia in FY21 [Slides]

This presentation provides details regarding integral experiments at Sandia National Laboratory for fiscal year 2021. The experiments discussed are as follows: IER 230: Characterize the Thermal Capabilities of the 7uPCX; IER 304: Temperature Dependent Critical Benchmarks; IER 305: Critical Experiments with UO 2 Rods and Molybdenum Foils; IER 306: Critical Experiments with UO 2 Rods and Rhodium Foils ; IER 441: Epithermal HEX Lattices with SNL 7uPCX Fuel for Testing Nuclear Data; IER 452: Inversion Point of the Isothermal Reactivity Coefficient; and IER 523: Critical Experiments with ACRR UO 2 -BeO Fuel.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Mesoscale modeling to inform Bison models of accident tolerant fuel concepts

U 3 Si 2 and doped UO 2 have been under investigation in recent years as potential accident-tolerant fuel concepts. In this report, lower-length scale studies of these fuel concepts carried out during Fiscal Year 2020 are detailed. U 3 Si 2 is a potential accident-tolerant fuel that shows promise due to its high thermal conductivity and higher uranium density relative to UO 2 . However, its swelling and fission gas release behavior in light water reactor (LWR) conditions is relatively unknown. To provide mechanistic insight and determine parameters for engineering-scale fuel performance modeling of pellet-form U 3 Si 2 , phase-field simulations of the growth, interconnection, and venting of intergranular fission gas bubbles were performed. The fractional coverage of the grain boundary and the fraction of bubble area that is vented were calculated as a function of time. From the simulation data, the fractional grain boundary coverage at saturation, an important parameter needed in engineering-scale modeling of swelling and fission gas release, was determined. Multiple simulations were run to determine the uncertainty in the calculated value. The effect of model assumptions and input parameters that are not well known was evaluated. Simulation results are compared to related theoretical and computational work. Based on the simulation results, a value of 0.60 for the fractional grain boundary coverage at saturation is recommended for U 3 Si 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

In Situ Electrochemical Testing of Uranium Dioxide under Anoxic Conditions (FY19 Report)

Prediction of the corrosion behavior of spent uranium oxide (UO 2 ) fuel is needed for developing predictive performance assessment models for a geologic repository. Currently, the Fuel Matrix Dissolution Model (FMDM) is being used for modeling UO 2 chemistry in the Engineered Barrier System (EBS) and includes the effects of oxidants, oxygen and hydrogen peroxide generated from radiolysis of the fuel in contact with water as well as the role of hydrogen on limiting corrosion. The aim of this work is to investigate the corrosion of UO 2 in-situ in the Scanning Electron Microscope (SEM). The corrosion potential (E corr ) is measured using an electrochemical workstation and a unique microfluidic reactor containing three-electrodes and compatible for multiple analytical platforms, termed System for Analysis at the Vacuum Liquid Interface (SALVI) electrochemical cell (E-cell) which has been developed at PNNL. This approach aims to provide real-time and in operando monitoring of UO 2 electrode stability and morphological change and to study the UO 2 corrosion process at the microscale. The results will be utilized to support the Mixed Potential Model (MPM) that has been developed for the repository program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Compare Mechanistic Predictions for Doped UO 2 Mechanical Response and Other Properties with Empirical Models and Experimental Measurements

The U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation program develops predictive capabilities using computational methods for the analysis and design of advanced reactor and fuel cycle systems. This program has been supporting the development of BISON, a high-fidelity, high resolution fuel performance tool at the engineering scale. As part of its development, additional modeling capabilities and improvements have been developed for relevant fuel forms. In this work, a fuel creep deformation model for Cr-doped fuel has been implemented into BISON, along with improvements to the empirical UO 2 fuel creep model based on experimental data and improvements to the radial power factor calculation for doped fuels. This work allows for more accurate simulation analyses for both UO 2 and doped-UO 2 fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗