Search NASA⌕ Search

SEARCH · Search NASA

Results for “VECTOR DOMINANCE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Disentangling magnification in combined shear-clustering analyses

ABSTRACT We investigate the sensitivity to the effects of lensing magnification on large-scale structure analyses combining photometric cosmic shear and galaxy clustering data (i.e. the now commonly called ‘3 × 2-point’ analysis). Using a Fisher matrix bias formalism, we disentangle the contribution to the bias on cosmological parameters caused by ignoring the effects of magnification in a theory fit from individual elements in the data vector, for Stage-III and Stage-IV surveys. We show that the removal of elements of the data vectors that are dominated by magnification does not guarantee a reduction in the cosmological bias due to the magnification signal, but can instead increase the sensitivity to magnification. We find that the most sensitive elements of the data vector come from the shear-clustering cross-correlations, particularly between the highest redshift shear bin and any lower redshift lens sample, and that the parameters ΩM, $S_8=\sigma _8\sqrt{\Omega _\mathrm{ M}/0.3}$, and w0 show the most significant biases for both survey models. Our forecasts predict that current analyses are not significantly biased by magnification, but this bias will become highly significant with the continued increase of statistical power in the near future. We therefore conclude that future surveys should measure and model the magnification as part of their flagship ‘3 × 2-point’ analysis.

Thiele, Leander↗

Control of a Thrust Alignment Table for Modeling the Coning Dynamics of a Spinning Spacecraft with a Follower Force

This document presents a system controlling the motion of a spherical air bearing used in the modeling of spacecraft dynamics and controls in a laboratory environment. The system is part of the Spinning Rocket Simulator (SRS), used to simulate the coning of spacecraft during a thrusting stage. The reaction force at the spherical air bearing supporting the spacecraft model must coincide with the thrust axis of the model for proper simulation. Therefore, the bearing is translated in a circular path to introduce a centrifugal force. This horizontal force along with the gravitational reaction force at the bearing combines to simulate the direction of the spacecraft's thrust force. The control system receives attitude information from the spacecraft model via a laser beam embedded in the model that impinges on a photosensitive array. The non-linear system is controlled using high-speed lookup tables and digital techniques. A vector-controlled motor and a stepper motor are given the necessary signals to accurately control the turntable and platform supporting the air bearing. Preliminary performance data is presented. Mechanical elements of the table and platform are described in detail. A wireless (RF) data path for all devices on the spacecraft model to an off-table command computer is also described.

Halsmer, Dominic↗

SIGNATURES OF RELATIVISTIC HELICAL MOTION IN THE ROTATION MEASURES OF ACTIVE GALACTIC NUCLEUS JETS

Polarization has proven to be an invaluable tool for probing magnetic fields in relativistic jets. Maps of the intrinsic polarization vectors have provided the best evidence to date for uniform, toroidally dominated magnetic fields within jets. More recently, maps of the rotation measure (RM) in jets have for the first time probed the field geometry of the cool, moderately relativistic surrounding material. In most cases, clear signatures of the toroidal magnetic field are detected, corresponding to gradients in RM profiles transverse to the jet. However, in many objects, these profiles also display marked asymmetries that are difficult to explain in simple helical jet models. Furthermore, in some cases, the RM profiles are strongly frequency and/or time dependent. Here we show that these features may be naturally accounted for by including relativistic helical motion in the jet model. In particular, we are able to reproduce bent RM profiles observed in a variety of jets, frequency-dependent RM profile morphologies, and even the time dependence of the RM profiles of knots in 3C 273. Finally, we predict that some sources may show reversals in their RM profiles at sufficiently high frequencies, depending upon the ratio of the components of jet sheath velocity transverse and parallel to the jet. Thus, multi-frequency RM maps promise a novel way in which to probe the velocity structure of relativistic outflows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Primordial magnetic fields from self-ordering scalar fields

A symmetry-breaking phase transition in the early universe could have led to the formation of cosmic defects. Because these defects dynamically excite not only scalar and tensor type cosmological perturbations but also vector type ones, they may serve as a source of primordial magnetic fields. In this study, we calculate the time evolution and the spectrum of magnetic fields that are generated by a type of cosmic defects, called global textures, using the non-linear sigma (NLSM) model. Based on the standard cosmological perturbation theory, we show, both analytically and numerically, that a vector-mode relative velocity between photon and baryon fluids is induced by textures, which inevitably leads to the generation of magnetic fields over a wide range of scales. We find that the amplitude of the magnetic fields is given by B∼10{sup −9}((1+z)/10{sup 3}){sup −2.5}(v/m{sub pl}){sup 2}(k/Mpc{sup −1}){sup 3.5}/√N Gauss in the radiation dominated era for k∼< 1 Mpc{sup −1}, with v being the vacuum expectation value of the O(N) symmetric scalar fields. By extrapolating our numerical result toward smaller scales, we expect that B∼ 10{sup −14.5}((1+z)/10{sup 3}){sup 1/2}(v/m{sub pl}){sup 2}(k/Mpc{sup −1}){sup 1/2}/√N Gauss on scales of k∼> 1 Mpc{sup −1} at redshift 0z∼> 110. This might be a seed of the magnetic fields observed on large scales today.

79 ASTRONOMY AND ASTROPHYSICS↗

The international cometary explorer mission to comet Giacobini-Zinner

The encounter, on September 11, 1985, between the International Cometary Explorer (ICE) and the comet Giacobini-Zinner, is described in detail. The primary goal of this encounter was to study the interaction between the solar wind and the comet. At the time of the encounter, the spacecraft was approximately 50 times farther from the earth than it was designed to go, making it difficult to recover data. The seven instruments on board ICE which were operational in this mission were the plasma electron, magnetometer, plasma waves, radio waves, plasma composition, low-energy cosmic ray, and energetic proton instruments. The encounter is depicted schematically, showing the times different regions were crossed. The spacecraft velocity vector, measured relative to the comet, made a 93 deg angle with respect to the plasma tail axis. The spacecraft crossed the center of the comet ion tail at approximately 1102 U.T. A cold, dense plasma was found near the center of the tail; at the very center was a temperature reading of only 13,000 K and a density of 670 electrons/cu cm. Alfven's model of comet tail formation was confirmed and it was found that water group ions are the dominant comet component. Pulses were detected which were attributed to dust particles hitting the spacecraft.

Von Rosenvinge, T. T.↗

Dark matter absorption via electronic excitations

We revisit the calculation of bosonic dark matter absorption via electronic excitations. Working in an effective field theory framework and consistently taking into account in-medium effects, we clarify the relation between dark matter and photon absorption. As is well-known, for vector (dark photon) and pseudoscalar (axion-like particle) dark matter, the absorption rates can be simply related to the target material’s optical properties. However, this is not the case for scalar dark matter, where the dominant contribution comes from a different operator than the one contributing to photon absorption, which is formally next-to-leading-order and does not suffer from in-medium screening. It is therefore imperative to have reliable first-principles numerical calculations and/or semi-analytic modeling in order to predict the detection rate. We present updated sensitivity projections for semiconductor crystal and superconductor targets for ongoing and proposed direct detection experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Melt Convection at Various Gravity Levels and Orientations on the Forces Acting on a Large Spherical Particle in the Vicinity of a Solidification Interface

Numerical modeling was Undertaken to analyze the influence of both radial and axial thermal gradients on convection patterns and velocities claiming solidification of pure Al and an Al-4 wt% Cu alloy. The objective of the numerical task was to predict the influence of convective velocity on an insoluble particle near a solid/liquid (s/l) interface. These predictions were then be used to define the minimum gravity level (q) required to investigate the fundamental physics of interactions between a particle and a s/l interface. This is an ongoing NASA founded flight experiment entitled "particle engulfment and pushing by solidifying interfaces (PEP)". Steady-state calculations were performed for different gravity levels and orientations with respect to the gravity vector The furnace configuration used in this analysis is the quench module insert (QMI-1) proposed for the Material Science Research Facility (MSRF) on board the International Space Station (ISS). The general model of binary alloy solidification was based on the finite element code FIDAP. At a low g level of 10(exp -4) g(sub o) (g(sub o) = 9.8 m/square s) maximum melt convection was obtained for an orientation of 90 deg. Calculations showed that even for this worst case orientation the dominant forces acting on the particle are the fundamental drag and interfacial forces.

Bune, Andris V.↗

Strong decays of heavy-light mesons in a chiral quark model

We carry out a systematic study of the heavy-light meson strong decays in a chiral quark model. For the S-wave vectors [D*(2007), D*{sup {+-}}(2010)], P-wave scalars [D{sub 0}*(2400), B{sub 0}*(5730)], and tensors [D{sub 2}*(2460), D{sub s2}*(2573)], we obtain results in good agreement with the experimental data. For the axial vectors D{sub 1}(2420) and D{sub 1}{sup '}(2430), a state mixing scheme between 1{sup 1}P{sub 1} and 1{sup 3}P{sub 1} is favored with a mixing angle {phi}{approx_equal}-(55{+-}5) deg., which is consistent with previous theoretical predictions. The same mixing scheme also applies to D{sub s1}(2460) and D{sub s1}(2536) that accounts for the narrow width of the D{sub s1}(2536) and its dominant decay into D*K. For B{sub 1}(5725) and B{sub 1}{sup '}(5732), such a mixing explains well the decay width of the former but leads to an even broader B{sub 1}{sup '}(5732). Predictions for the strange-bottom axial vectors are also made. For the undetermined meson D*(2640), we find that they fit well in the radially excited state 2{sup 3}S{sub 1} according to its decay mode. The newly observed D{sub sJ}*(2860) strongly favors the D-wave excited state 1{sup 3}D{sub 3}. For D{sub sJ}*(2632) and D{sub sJ}*(2690), we find they are difficult to fit in any D{sub s} excitations in that mass region, if the experimental data are accurate. Theoretical predictions for decay modes of those unobserved states as multiplets of 2S and 1D waves are also presented, which should be useful for the further experimental search for those states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computing singularities of perturbation series

Many properties of current ab initio approaches to the quantum many-body problem, both perturbational and otherwise, are related to the singularity structure of the Rayleigh-Schroedinger perturbation series. A numerical procedure is presented that in principle computes the complete set of singularities, including the dominant singularity which limits the radius of convergence. The method approximates the singularities as eigenvalues of a certain generalized eigenvalue equation which is solved using iterative techniques. It relies on computation of the action of the Hamiltonian matrix on a vector and does not rely on the terms in the perturbation series. The method can be useful for studying perturbation series of typical systems of moderate size, for fundamental development of resummation schemes, and for understanding the structure of singularities for typical systems. Some illustrative model problems are studied, including a helium-like model with {delta}-function interactions for which Moeller-Plesset perturbation theory is considered and the radius of convergence found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of Impedance and Stability for Doubly-Fed Induction Generator Based on Voltage-Modulated Direct Power Control

Voltage-modulated direct power control (VM-DPC) applied to the doubly-fed induction generator (DFIG) offers superior steady-state and transient performance but remains underexplored for suppressing wideband oscillations. Here, this article proposes a comprehensive impedance for the VM-DPC-based DFIG, analyzing its impedance characteristics and stability mechanisms compared with the DFIG based on vector-oriented control (VOC). The unified power transfer function is defined for DFIGs employing VM-DPC or VOC to ensure consistent comparison benchmarks. The comprehensive impedance of VM-DPC-based DFIG, incorporating mechanical and grid-side converter (GSC) dynamics, is derived using complex vector modeling in the αβ -frame. Furthermore, the influence of VM-DPC parameters and grid strength on the stability of grid-connected DFIG systems is assessed through eigenvalue trajectory analysis. Impedance analysis reveals the significant contributions of mechanical and GSC dynamics to DFIG impedance, as well as the narrower frequency range of negative resistance in the VM-DPC-based DFIG compared to the VOC-based DFIG. Stability analysis identifies the VM-DPC parameters of the rotor-side converter as dominant factors affecting system stability and confirms that the VM-DPC-based DFIG achieves better stability under weak grid conditions than its VOC-based counterpart. These findings are validated through simulations and experiments.

42 ENGINEERING↗

PKS 1502+106: A NEW AND DISTANT GAMMA-RAY BLAZAR IN OUTBURST DISCOVERED BY THE FERMI LARGE AREA TELESCOPE

The Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope discovered a rapid ({approx}5 days duration), high-energy (E > 100 MeV) gamma-ray outburst from a source identified with the blazar PKS 1502+106 (OR 103, S3 1502+10, z = 1.839) starting on 2008 August 5 ({approx}23 UTC, MJD 54683.95), and followed by bright and variable flux over the next few months. Results on the gamma-ray localization and identification, as well as spectral and temporal behavior during the first months of the Fermi all-sky survey, are reported here in conjunction with a multiwaveband characterization as a result of one of the first Fermi multifrequency campaigns. The campaign included a Swift ToO (followed up by a 16 day observation on August 7-22, MJD 54685-54700), VLBA (within the MOJAVE program), Owens Valley Radio Observatory (OVRO) 40 m, Effelsberg-100 m, Metsaehovi-14 m, RATAN-600, and Kanata-Hiroshima radio/optical observations. Results from the analysis of archival observations by {integral}, XMM-Newton, and Spitzer space telescopes are reported for a more complete picture of this new gamma-ray blazar. PKS 1502+106 is a sub-GeV peaked, powerful flat spectrum radio quasar (luminosity at E > 100 MeV, L{sub g}amma, is about 1.1 x 10{sup 49} erg s{sup -1}, and black hole mass likely close to 10{sup 9} M{sub sun}), exhibiting marked gamma-ray bolometric dominance, in particular during the asymmetric outburst (L{sub g}amma/L{sub opt} {approx} 100, and 5 day averaged flux F{sub E>100MeV} = 2.91 +- 1.4 x 10{sup -6} ph cm{sup -2} s{sup -1}), which was characterized by a factor greater than 3 of flux increase in less than 12 hr. The outburst was observed simultaneously from optical to X-ray bands (F{sub 0.3-10{sub keV}} = 2.18{sup +0.15}{sub -0.12} x 10{sup -12} erg cm{sup -2} s{sup -1}, and hard photon index {approx}1.5, similar to past values) with a flux increase of less than 1 order of magnitude with respect to past observations, and was likely controlled by Comptonization of external-jet photons produced in the broad-line region (BLR) in the gamma-ray band. No evidence of a possible blue bump signature was observed in the optical-UV continuum spectrum, while some hints for a possible 4 day time lag with respect to the gamma-ray flare were found. Nonetheless, the properties of PKS 1502+106 and the strict optical/UV, X-, and gamma-ray cross-correlations suggest the contribution of the synchrotron self-Compton (SSC), in-jet, process should dominate from radio to X-rays. This mechanism may also be responsible for the consistent gamma-ray variability observed by the LAT on longer timescales, after the ignition of activity at these energies provided by the BLR-dissipated outburst. Modulations and subsequent minor, rapid flare events were detected, with a general fluctuation mode between pink-noise and a random-walk. The averaged gamma-ray spectrum showed a deviation from a simple power law, and can be described by a log-parabola curved model peaking around 0.4-0.5 GeV. The maximum energy of photons detected from the source in the first four months of LAT observations was 15.8 GeV, with no significant consequences on extragalactic background light predictions. A possible radio counterpart of the gamma-ray outburst can be assumed only if a delay of more than three months is considered on the basis of opacity effects at cm and longer wavelengths. The rotation of the electric vector position angle observed by VLBA from 2007 to 2008 could represent a slow field ordering and alignment with respect to the jet axis, likely a precursor feature of the ejection of a superluminal radio knot and the high-energy outburst. This observing campaign provides more insight into the connection between MeV-GeV flares and the moving, polarized structures observed by the VLBI.

79 ASTRONOMY AND ASTROPHYSICS↗

A generalized 3D elastic model for nanoscale, self-assembled oxide-metal thin films with pillar-in-matrix configurations

In recent years, functional oxide-metal based vertically aligned nanocomposite (VAN) thin films have gained interest due to their intriguing physical properties and multifunctionalities stemming from the complex interactions between the two phases in the film and the substrate. In this work, we develop a model for studying the energetics of these thin film systems, including the effects of both lattice mismatch and capillary forces due to interface curvature. Each phase is incorporated into the model using a phase indicator function, and we introduce the capillary forces as body forces using a vector density representation of the interface. The model is implemented using the finite element method to study the deformation of the thin film which is composed of Au nanopillars embedded in a La 0.7 Sr 0.3 MnO 3 (LSMO) matrix on an SrTiO 3 (STO) substrate. Further, the results suggest that the total energy is lowest for random configurations of pillars compared to ordered square and hexagonal lattice configurations, consistent with the random distribution of pillars found in experiments. Furthermore, we find that the interfacial energy dominates the total energy of each configuration, suggesting that interfacial energy in the system is an important design parameter for nanocomposite growth, along with the lattice mismatch.

36 MATERIALS SCIENCE↗

Polar cap observations of thermospheric winds and temperatures at Sondre Stromfjord, Greenland

An agreement of averaged temperatures with mass spectrometer incoherent scatter radar looked reasonable for several nights, but for many nights there are differences: (1) midnight period of cooling, and (2) temperature increases associated with overhead crossings of the auroral belt. The observed rise of the temperature before dawn in conjunction with the high 6300A intensities suggests a connection between the two effects: soft particle precipitation most likely candidate but frictional heating perhaps also a possibility. A comparison with the thermospheric general circulation model calculations also needed. The technique for formulating neutral wind vectors performs well in most cases. The observed patterns show evidence for abatement in the midnight sector in the meridional wind component at the separatix between the two cells with a frequency of the order of 20 to 25%, also observed in radar observations at Sondre Stromfjord. The observed patterns for magnetically quiet conditions show flow characteristic of the auroral belt, westward in evening followed by the midnight surge. The observed patterns for active conditions show dominance either by the evening cell or the morning cell, but most often the former.

Meriwether, J. W., Jr.↗

Search for Non-Standard Model Physics in Rare Decays at CDF

We present two recent results obtained by the CDF collaboration at the Tevatron collider. We first describe the first polarization measurement in a charmless $B^0_s$ decay in two light vector mesons, $B^0_s \to \phi\phi$, using 2.9 $fb^{-1}$ of data. An angular analysis of the final state decay products allows CDF to determine a longitudinal polarization fraction $fL = 0.348 \pm 0.041 (stat.) \pm 0.021 (syst.)$, which is inconsistent with naive expectations based on the V-A nature of weak currents and confirms the pattern of lower than expected longitudinal polarization fraction in $b \to s$ penguin dominated $B \to VV$ decays. We then report on the first observation of the electroweak penguin decay $B^0_s \to \phi\mu^+ \mu^-$ and on the measurement of the differential decay rate, longitudinal polarization fraction and forward-backward asymmetry in $B^0 \to K^{*0} \mu ^+ \mu^-$ decays using 4.4 fb$^{-1}$ of data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Particle filter-based modulation domain infrared targets tracking

Faced with problems of low contrast, poor SNR, and relatively complicated tracking environment, stable infrared target tracking is worth researching for its many potential applications. In this paper, instead of traditional target tracking in the pixel domain, we propose a sampling importance resampling (SIR) particle filter method with indirect velocity measurements to track infrared targets in the modulation domain. The dominant amplitude modulation (AM) features used for tracking is extracted by decomposing the input image using an 18-channel Gabor filter bank followed by the application of the dominant component analysis approach. The dominant AM modulation features provide a significant partial texture characteristic of the target which can be separated from background with better discrimination. To take advantage of observed kinematics, we utilize the augmented state vector with indirect velocity information via combining the measurements of velocity in adjacent frames to the SIR particle filter framework, which weakens weights of particles with bad velocity estimates but still having association with the cluttered background or other moving objects. A dynamic template update strategy is also provided to prevent the tracker from appearance model drift. Experiments indicate that the proposed method is effective for raising the tracking accuracy compared with other tracking methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of residual gravity on crystal growth processes

The effects of steady and time-dependent residual accelerations on representative melt and solution crystal growth systems have been investigated using numerical models. For the melt growth system, it was found that the lateral nonuniformity in crystal composition, depending on the particular operating conditions, can be very sensitive to the orientation of the steady component of the residual gravity vector down to 10 to the -6th g. Oscillatory residual accelerations (g-jitter) were found to lead to transients in the dopant distribution. For the solution growth, longtime simulations showed that at 10 to the -5th g, and the cooling rates used in Spacelab 3 experiments, diffusive transport dominates only in the beginning. Convective transport becomes increasingly significant after 3 to 5 hours, depending on the orientation of the crystal in the residual gravity field.

Rosenberger, F.↗

Magnetization dynamics fingerprints of an excitonic condensate t 2 g 4 magnet

The competition between spin-orbit coupling (SOC) λ and electron-electron interaction U leads to a plethora of novel states of matter, extensively studied in the context of t 2 g 4 and t 2 g 5 materials, such as ruthenates and iridates. Excitonic magnets—the antiferromagnetic state of bounded electron-hole pairs-are prominent examples of phenomena driven by those competing energy scales. Interestingly, recent theoretical studies predicted that excitonic magnets can be found in the ground state of SOC t 2 g 4 Hubbard models. Here we present a detailed computational study of the magnetic excitations in that excitonic magnet, employing one-dimensional chains (via density matrix renormalization group) and small two-dimensional clusters (via Lanczos). Specifically, first we show that the low-energy spectrum is dominated by a dispersive (acoustic) magnonic mode, with extra features arising from the λ = 0 state in the phase diagram. Second, and more importantly, we found a novel magnetic excitation forming a high-energy optical mode with the highest intensity at wave-vector q → 0 . In the excitonic condensation regime at large U , we also have found a novel high-energy π mode composed solely of orbital excitations. Overall, these features do not appear all together in any of the neighboring states in the phase diagram and thus constitute unique fingerprints of the t 2 g 4 excitonic magnet, of importance in the analysis of neutron and resonant inelastic x-ray scattering experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics of Restricted Boltzmann Machines and Related Learning Dynamics

We investigate the thermodynamic properties of a restricted Boltzmann machine (RBM), a simple energy-based generative model used in the context of unsupervised learning. Assuming the information content of this model to be mainly reflected by the spectral properties of its weight matrix W, we try to make a realistic analysis by averaging over an appropriate statistical ensemble of RBMs. First, a phase diagram is derived. Otherwise similar to that of the Sherrington–Kirkpatrick (SK) model with ferromagnetic couplings, the RBM’s phase diagram presents a ferromagnetic phase which may or may not be of compositional type depending on the kurtosis of the distribution of the components of the singular vectors of W. Subsequently, the learning dynamics of the RBM is studied in the thermodynamic limit. A “typical” learning trajectory is shown to solve an effective dynamical equation, based on the aforementioned ensemble average and explicitly involving order parameters obtained from the thermodynamic analysis. In particular, this let us show how the evolution of the dominant singular values of W, and thus of the unstable modes, is driven by the input data. At the beginning of the training, in which the RBM is found to operate in the linear regime, the unstable modes reflect the dominant covariance modes of the data. In the non-linear regime, instead, the selected modes interact and eventually impose a matching of the order parameters to their empirical counterparts estimated from the data. Finally, we illustrate our considerations by performing experiments on both artificial and real data, showing in particular how the RBM operates in the ferromagnetic compositional phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗