Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variable selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Investigation into Reductive Separation of Tc-99 from Low Activity Waste Off-Gas Condensate by Zero Valent Iron Materials - 20311

This study is investigating the potential for reductive separation of technetium-99 (Tc) from off-gas condensate generated from vitrification of legacy tank waste at the Hanford Tank Waste Treatment and Immobilization Plant. Management of Tc is a high-priority activity for the U.S. Department of Energy (DOE) Office of Environmental Management (EM) complex, which must be addressed based on knowledge gaps and technology development needs outlined in the DOE-EM Technetium Management Program Plan [1]. Technetium is one of the main risk drivers in the permanent disposal of low activity waste (LAW) by vitrification at the Hanford Site due to its high volatility and only fractional incorporation into borosilicate glass. Volatilized Tc will be captured by an off-gas treatment system, and the current plan is to continuously recycle generated condensate back to the LAW glass melter feed. Off-gas recycling is effective at increasing Tc loading in the LAW glass, but it also disproportionately increases concentrations of sulfate, halides, and other volatile compounds impeding overall LAW processing leading to significantly greater waste glass volume requirements. Removal of Tc from secondary liquid waste offers an alternative disposal route to continuous off-gas recycling which may result in significant reduction of the volumes of LAW waste glass and substantial cost savings. The objective of this research funded by the DOE-EM Minority Serving Institutions Partnership Program (MSIPP) is to determine the suitability of zero valent iron (ZVI) as a separation technology to remove Tc from the off-gas condensate stream to minimize its recycle. While ZVI has been proposed for various remediation applications with Tc, it has not been studied for its suitability for removing Tc from the LAW off-gas condensate. The goal is to identify the optimal conditions for which Tc{sup (VII)} will be reduced to Tc{sup (IV)} species and incorporated into an iron matrix. This paper presents a programmatic overview of our evaluation of commercial ZVI materials for their efficiency towards Tc{sup (VII)} reductive removal from simplified off-gas simulant solutions under aerobic conditions. Tc concentrations in solutions were monitored for up to 30 days to determine efficiency and kinetics of reductive removal of Tc. The best performing candidate materials were selected for further experiments evaluating the effects of (1) variable ionic strength, (2) the presence of chromium and corrosive anions, and (3) ZVI aging on Tc{sup (VII)} reductive removal in batch experiments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Better practices for inferring ecosystem water use strategy from eddy covariance data

Eddy covariance data are critical for inferring ecosystem water use strategies. Yet, such inferences are sensitive to a range of assumptions applied across studies, hindering our understanding of water use strategies within and across eddy covariance sites. A recent analysis across 151 FLUXNET2015 and AmeriFlux-FLUXNET datasets found that poor model performance was the key driver of non-robust inferences of ecosystem water use strategies. Here, we leverage this previous analysis to (i) identify the specific assumptions that improve inference model performance across most sites, (ii) explain the mechanisms behind the performance improvements, and (iii) check whether better performance improves water use inference. We find that the common practice of fitting a model to canopy conductance (G c ) derived from the evapotranspiration (ET) observations, rather than to observed ET itself, artificially amplifies data errors and degrades the model performance. Next, accounting for vegetation dynamics by applying a growing season filter or incorporating satellite LAI data improves performance, but the former practice may remove soil water stress periods. Lastly, using the leaf-to-air vapor pressure deficit (VPD l ) derived from ET observations as a model input may artificially inflate performance. Based on these results, we recommend selecting observed ET (rather than derived G c ) as the response variable, carefully accounting for vegetation dynamics, and avoiding derived VPD l as a model input; these best practices improve model performance by c. 20% and robustness by c. 80% across all eddy covariance sites. Nevertheless, the performance improvements do not always correspond to more robust inference of water use strategies, as model parameter selection and surface energy budget closure corrections still strongly influence the ecosystem water use parameter estimation in a site-specific manner.

AmeriFlux↗
DOE OSTI2025

Combining Machine Learning and Comparative Effectiveness Methodology to Study Primary Care Pharmacotherapy Pathways for Veterans With Depression

Our objective is to demonstrate an innovative method combining machine learning with comparative effectiveness research techniques and to investigate a hitherto unstudied question about the effectiveness of common prescribing patterns. For Operation Enduring Freedom/Operation Iraqi Freedom veterans with major depressive disorder, we generate pharmacotherapy pathways (of antidepressants) using process mining and machine learning. We select the medication episodes that were started at subtherapeutic doses by the first assigned primary care physician and observe the paths that those medication episodes follow. Using 2-stage least squares, we test the effectiveness of starting at a low dose and staying low for longer versus ramping up fast while balancing observable and unobservable characteristics of patients and providers through instrumental variables. We leverage predetermined provider practice patterns as instruments. We collected outpatient pharmacy data for selective serotonin reuptake inhibitors and selective norepinephrine reuptake inhibitors, patient and provider characteristics (as control variables), and the instruments for our cohort. All data were extracted for the period between 2006 and 2020. There is a statistically significant positive effect (0.68, 95% CI 0.11–1.25) of “ramping up fast” on engagement in care. When we examine the effect of “ramping up slow”, we see an insignificant negative impact on engagement in care (−0.82, 95% CI −1.89 to 0.25). As expected, the probability of drop-out also seems to have a negative effect on engagement in care (−0.39, 95% CI −0.94 to 0.17). We further validate these results by testing with medication possession ratios calculated periodically as an alternative engagement in care metric. Our findings contradict the “Start low, go slow” adage, indicating that ramping up the dose of an antidepressant faster has a significantly positive effect on engagement in care for our population.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Separate the Role of Southern and Northern Extra‐Tropical Pacific in Tropical Pacific Climate Variability

Abstract Observational and modeling studies have elucidated the influential role played by the southern and northern extratropical Pacific (SEP and NEP) forcing in shaping dynamics of tropical Pacific climate variability. However, the relative importance of the NEP and SEP and the timescale on which they impact the tropics remain unclear. Using a linear inverse model (LIM) that selectively incorporates or excludes tropical‐extratropical coupling, we find a reduction in tropical interannual variability (∼40%) and low‐frequency (sub‐decadal to decadal) variability in the southeastern tropical Pacific region (∼70%) in the absence of SEP. Conversely, the absence of NEP yields no significant impact on tropical interannual variability but markedly diminishes low‐frequency variability in the central tropical Pacific region (∼70%). LIM and statistic diagnostics on CMIP6 models show the low‐frequency to total variability ratio in the tropical Pacific depending on their NEP and SEP representation. Models with more (less) low‐frequency power tend to show stronger NEP (SEP) dynamics.

Geology↗
DOE OSTI2024

Multi-Attribute Subset Selection enables prediction of representative phenotypes across microbial populations

The interpretation of complex biological datasets requires the identification of representative variables that describe the data without critical information loss. This is particularly important in the analysis of large phenotypic datasets (phenomics). Here we introduce Multi-Attribute Subset Selection (MASS), an algorithm which separates a matrix of phenotypes (e.g., yield across microbial species and environmental conditions) into predictor and response sets of conditions. Using mixed integer linear programming, MASS expresses the response conditions as a linear combination of the predictor conditions, while simultaneously searching for the optimally descriptive set of predictors. We apply the algorithm to three microbial datasets and identify environmental conditions that predict phenotypes under other conditions, providing biologically interpretable axes for strain discrimination. MASS could be used to reduce the number of experiments needed to identify species or to map their metabolic capabilities. The generality of the algorithm allows addressing subset selection problems in areas beyond biology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Implementing Superresolution of Nonstationary Tides with Wavelets: An Introduction to CWT_Multi

Abstract Tides are often nonstationary due to nonastronomical influences. Investigating variable tidal properties implies a trade-off between separating adjacent frequencies (using long analysis windows) and resolving their time variations (short analysis windows). Previous continuous wavelet transform (CWT) tidal methods resolved tidal species. Here, we present CWT_Multi, a MATLAB code that 1) uses CWT linearity (via the “response coefficient method”) to implement superresolution, i.e., resolving tidal constituents beyond the Rayleigh criterion; 2) provides a Munk–Hasselmann constituent selection criterion appropriate for superresolution; and 3) introduces an objective, time-variable form of inference (“dynamic inference”) based on time-varying data properties. CWT_Multi resolves tidal species on time scales of days, and multiple constituents per species with fortnightly filters. It outputs astronomical phase lags and admittances, analyzes multiple records, and provides power spectra of the signal(s), residual(s), and reconstruction(s); confidence limits; and signal-to-noise ratios. Artificial data and water levels from the Lower Columbia River Estuary (LCRE) and San Francisco Bay Delta (SFBD) are used to test CWT_Multi and compare it to harmonic analysis programs NS_Tide and UTide. CWT_Multi provides superior reconstruction, detiding, dynamic analysis utility, and time resolution of constituents (but with broader confidence limits). Dynamic inference resolves closely spaced constituents (like K 1 , S 1 , and P 1 ) on fortnightly time scales, quantifying impacts of diel power peaking (with a 24-h period, like S 1 ) on water levels in the LCRE. CWT_Multi also helps quantify the impacts of high flows and a salt barrier closing on tidal properties in the SFBD. On the other hand, CWT_Multi does not excel at prediction, and results depend on analysis details, as for any method applied to nonstationary data. Significance Statement Ocean tides, especially in coastal and estuarine systems, are often nonstationary, in the sense that the mean and standard deviation of tidal properties vary over time, usually in response to some nontidal process. We introduce here a MATLAB code, CWT_Multi, that uses wavelet transforms to resolve both tidal species and constituents on time scales from a few days to months. Our code accommodates multiple scalar time series and has typical tidal analysis features like constituent selection and inference, plus two forms of uncertainty analyses. It is flexible, allowing the user to adapt analysis properties to diverse datasets. CWT_Multi is applicable to many problems involving time-variable tides, including sea level rise, compound flooding, sediment transport, and wetland habitat analyses. Application to vector data is a straightforward extension, but further development of our uncertainty analysis is merited. Because nonstationary tidal analysis is rapidly advancing, we also define the features of a “well-formed” analysis code.

Lobo, Matthew↗
DOE OSTI2024

Modulating spin-valley relaxation in WSe 2 with variable thickness VOPc layers

Combining the synthetic tunability of molecular compounds with the optical selection rules of transition metal dichalcogenides (TMDCs) that derive from spin-valley coupling could provide interesting opportunities for the readout of quantum information. However, little is known about the electronic and spin interactions at such interfaces and the influence on spin-valley relaxation. Here, in this work, vanadyl phthalocyanine (VOPc) molecular layers are thermally evaporated on WSe 2 to explore the effect of molecular layer thickness on excited-state spin-valley polarization. The thinnest molecular layer supports an interfacial state which destroys the spin-valley polarization almost instantaneously, whereas a thicker molecular layer results in longer-lived spin-valley polarization than the WSe 2 monolayer alone. The mechanism appears to involve a tightly bound species at the molecule/TMDC interface that strengthens exchange interactions and is largely avoided in thicker VOPc layers that isolate electrons from WSe 2 holes.

2D materials↗
DOE OSTI2026

In Vitro Selection of Antibodies Targeting Yersinia pestis Membrane Lipids Using Nanodisc-Based Antigen Presentation

Proteins are the most common targets for antibody discovery and vaccine development, but their sequence variability can limit the breadth of resulting antigens. Lipids represent an alternative class of antigens due to their structural conservation and roles in host–pathogen interactions. Here, we describe the development and optimization of an in vitro antibody selection workflow using lipid-containing nanodiscs as antigen presentation platforms to enable phage and yeast display selections under conditions adapted for these non-protein targets. Lipopolysaccharide (LPS) nanodiscs were first used as a model system to evaluate selection strategies, including competitive and subtractive approaches to reduce non-specific binders, yielding peptide and single-chain variable fragment (scFv) binders that were affinity matured to improve binding signals. The same approach was subsequently used to select scFv antibodies that recognize lipid nanodiscs prepared from Yersinia pestis membrane lipid extracts. These antibodies show binding to lipid nanodiscs derived from Y. pestis, with evidence of selectivity relative to control nanodiscs. Overall, this work establishes a workflow for antibody selection against lipid-containing nanodisc antigens and highlights practical considerations associated with these targets. The approach may be useful for generating affinity reagents to membrane-associated lipids, although further characterization is required to define antigen specificity and functional activity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Optimal adjustment sets for causal query estimation in partially observed biomolecular networks

Abstract Causal query estimation in biomolecular networks commonly selects a ‘valid adjustment set’, i.e. a subset of network variables that eliminates the bias of the estimator. A same query may have multiple valid adjustment sets, each with a different variance. When networks are partially observed, current methods use graph-based criteria to find an adjustment set that minimizes asymptotic variance. Unfortunately, many models that share the same graph topology, and therefore same functional dependencies, may differ in the processes that generate the observational data. In these cases, the topology-based criteria fail to distinguish the variances of the adjustment sets. This deficiency can lead to sub-optimal adjustment sets, and to miss-characterization of the effect of the intervention. We propose an approach for deriving ‘optimal adjustment sets’ that takes into account the nature of the data, bias and finite-sample variance of the estimator, and cost. It empirically learns the data generating processes from historical experimental data, and characterizes the properties of the estimators by simulation. We demonstrate the utility of the proposed approach in four biomolecular Case studies with different topologies and different data generation processes. The implementation and reproducible Case studies are at https://github.com/srtaheri/OptimalAdjustmentSet.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Radio-bright versus radio-dark gamma-ray bursts – more evidence for distinct progenitors

ABSTRACT We analyse two distinct samples of gamma-ray bursts (GRBs), with and without radio afterglow emission. We use an updated sample of 211 GRBs and find, in agreement with previous results (although with a sample that is almost twice as large), that the intrinsic gamma-ray duration (Tint) and isotropic equivalent energy (Eiso) distributions between these two populations appear to be significantly different. This implies that the radio-bright GRBs are more energetic and last longer than radio-dark GRBs. The two samples’ redshift distributions (z) are not statistically different. We analyse several correlations between variables (Eiso, Tint, jet opening angle, and z), accounting for selection effects and redshift evolution using the Efron–Petrosian method. We find a statistically significant anticorrelation between the jet opening angle and redshift, as well as between Tint and redshift, for both radio-bright and radio-dark GRBs. Finally, in agreement with previous work, we find that very high energy (0.1–100 GeV) extended emission is present only in the radio-bright GRB sample. Our work supports the possibility that the radio-bright and radio-dark GRBs originate from different progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Amylases in the Human Vagina

ABSTRACT Dominance of Lactobacillus species in vaginal communities is a hallmark of healthy conditions in the female genital tract. Key nutrients for lactobacilli include sugars produced when glycogen is degraded by α-amylase in the vagina. While α-amylase activity has been demonstrated in vaginal fluids, it is unclear whether α-amylases are produced solely by the host, bacteria in the vagina, or both. We screened cervicovaginal mucus from 23 reproductive-age women, characterized the species composition of vaginal communities, measured vaginal pH, and determined levels of amylase activity, glycogen, and lactic acid. Based on differences in these measured variables, one sample from each of four individual donors was selected for metagenomic and proteomic analyses. Of eight putative bacterial amylases identified in the assembled bacterial metagenomes, we detected four in vaginal fluids. These amylases were produced by various bacteria in different vaginal communities. Moreover, no two communities were the same in terms of which bacteria were producing amylases. Although we detected bacterial amylases in vaginal fluids, there was no clear association between the bacterial species that was dominant in a community and the level of amylase activity. This association was likely masked by the presence of human α-amylase, which was also detected in vaginal fluids. Finally, the levels of amylase activity and glycogen were only weakly associated. Our findings show, for the first time, that multiple amylases from both bacterial and human origins can be present simultaneously in the vagina. This work also suggests that the link between glycogen, amylase, and Lactobacillus in the vagina is complex. IMPORTANCE In this study, we show that multiple bacteria in the vaginal community produce amylases that hydrolyze glycogen into simpler sugars (i.e., maltose and maltotriose). These sugars serve as “common goods” that sustain bacterial populations in vaginal communities. Given the temporal changes that are observed in the human vaginal microbiome, we expect the kinds of bacterial amylases produced will also vary over time. These differences influence the pool of resources that are broadly shared and shape the species composition of the vaginal bacterial community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Development of an Unmanned Mobile Current Turbine Platform: Preprint

The design and development of a prototype unmanned mobile floating platform, equipped with a custom low-flow marine current turbine for autonomously seeking and harnessing tidal/coastal currents is described. The platform is an unmanned surface vehicle in the form of a catamaran with two electric outboard motors and capabilities for autonomous navigation. An undershot water wheel, aided by a custom flow concentrator, has been selected as the basic design for the marine current turbine, which is mounted on the stern of the unmanned surface vehicle platform. The concept of operation is that the platform would navigate to a designated marine current resource, autonomously anchor at the location, align itself in the current and deploy the current turbine using a custom cable-lift deployment mechanism. As the turbine harnesses the local current, an onboard power-take-off device converts the harnessed mechanical energy to electricity which is stored in onboard batteries. Considerations of deployment in tidal and coastal waters required obtaining the necessary environmental permits for conducting in-water testing; developing required mitigation measures in protecting local wildlife and their habitats; and identifying potential in-water test sites and surveying them for their suitability in terms of the current resource, bottom type, water depth, and local boat traffic. The design and development of the turbine and the results of initial in-water testing are discussed. The potential for scaling up the system for extended capacity is presented.

ENGINEERING,TIDAL AND WAVE POWER↗
DOE OSTI2023

Ground Motion Models (GMMs) Improvements Using Earthquake Simulations on High Performance Computers

A computationally efficient simulation platform was developed that can provide representative synthetic ground motions from crustal earthquakes in the Stable Continental Regions of Central and Eastern US (CEUS), using 3D modeling and high-performance computing. The main objective was to use synthetic ground motion to provide constrains to refinements of exiting ergodic Ground Motion Models (GMMs), for large magnitude earthquakes and near-fault distances, for which these models are less reliable. Physics-based broadband (0-5Hz) ground motion simulations were used to estimate the near-fault ground motion amplitudes and within event and between-event variabilities associated with fault rupture characteristics. As part of a strategy for selecting a reginal velocity model and validation of developed rupture modeling technique, ground motions from the moment magnitude Mw5.0 November 7, 2016, Cushing Oklahoma, and Mw5.8 September 3, 2016, Pawnee Oklahoma earthquakes were simulated. In our simulations we used a 3D regional velocity model that was based on Saikia’s 1D velocity model. Saikia’s model demonstrated better performance in modelling high frequency regional wave propagation for CEUS region. The proposed 3D model includes lateral variations added to the 1D background model using the stochastic scheme of Pitarka and Mellors. Comparisons of the simulations with recordings of both earthquakes demonstrated the reliability of our deterministic simulation approach while emphasizing the importance of including small-scale variability in the regional velocity model needed to reproduce the observed high-frequency wave scattering effects. As part of validation analysis, comparisons with different GMMs for a Mw6.5 earthquake in the CESUS region resulted in a very good match between the simulated and empirical ground motion models. Initial investigations of within-event and between-event ground motion variabilities for Mw6.5 scenario earthquakes on a strike-slip fault, suggest that they are strongly related to spatial slip and slip rate variations, average rupture velocity, rupture area and rupture initiation location. For certain scenarios we found that the ground motion variability observed at near-fault distances (< 5 km) also persists at longer distances. Regardless of the rupture scenario, the simulated ground motion tends to fully saturate at short distances and for all periods. The near-fault saturation has to do with the attenuation of waves propagating along the fault and local rupture radiation pattern that also contribute to stronger ground motion variation at such distances. Analysis of effects of rupture initiation location suggest that the peak ground motion (PGV) and spectral acceleration (SA) can be quite variable due to rupture directivity effects. Such effects are stronger at periods longer than 1s. The effect of the 1D velocity models and surface topography on simulated ground motion were investigated by comparing three component synthetic seismograms computed at selected sites. Effect of surface topography was considered using the ratio between spectral accelerations simulated for two 1D models with flat surface topography and realistic model with surface topography. Overall, the topography slightly amplifies (by ~30%) the ground motion amplitude in the frequency range 1-3Hz. The effect of topography is more visible in the surface and coda waves portion of the seismograms.

58 GEOSCIENCES↗
DOE OSTI2023

Simple Statistical Models for Predicting Overpressure Due to CO2 and Low-Salinity Waste-Fluid Injection into Deep Saline Formations

Deep saline aquifers have been used for waste-fluid disposal for decades and are the proposed targets for large-scale CO2 storage to mitigate CO2 concentration in the atmosphere. Due to relatively limited experience with CO2 injection in deep saline formations and given that the injection targets for CO2 sometimes are the same as waste-fluid disposal formations, it could be beneficial to model and compare both practices and learn from the waste-fluid disposal industry. In this paper, we model CO2 injection in the Patterson Field, which has been proposed as a site for storage of 50 Mt of industrial CO2 over 25 years. We propose general models that quickly screen the reservoir properties and calculate pressure changes near and far from the injection wellbore, accounting for variable reservoir properties. The reservoir properties we investigated were rock compressibility, injection rate, vertical-to-horizontal permeability ratio, average reservoir permeability and porosity, reservoir temperature and pressure, and the injectant total dissolved solids (TDS) in cases of waste-fluid injection. We used experimental design to select and perform simulation runs, performed a sensitivity analysis to identify the important variables on pressure build-up, and then fit a regression model to the simulation runs to obtain simple proxy models for changes in average reservoir pressure and bottomhole pressure. The CO2 injection created more pressure compared to saline waste-fluids, when similar mass was injected. However, we found a more significant pressure buildup at the caprock-reservoir interface and lower pressure buildup at the bottom of the reservoir when injecting CO2 compared with waste-fluid injection.

Ansari, Esmail↗
DOE OSTI2023

Long-term multi-wavelength study of 1ES 0647+250

The BL Lac object 1ES 0647+250 is one of the few distant γ-ray emitting blazars detected at very high energies (VHEs; &100 GeV) during a non-flaring state. It was detected with the MAGIC telescopes during a period of low activity in the years 2009-2011 as well as during three flaring activities in the years 2014, 2019, and 2020, with the highest VHE flux in the last epoch. An extensive multi-instrument data set was collected as part of several coordinated observing campaigns over these years. We aim to characterise the long-term multi-band flux variability of 1ES 0647+250, as well as its broadband spectral energy distribution (SED) during four distinct activity states selected in four different epochs, in order to constrain the physical parameters of the blazar emission region under certain assumptions. We evaluated the variability and correlation of the emission in the different energy bands with the fractional variability and the Z transformed discrete correlation function, as well as its spectral evolution in X-rays and γ rays. Owing to the controversy in the redshift measurements of 1ES 0647+250 reported in the literature, we also estimated its distance in an indirect manner through a comparison of the GeV and TeV spectra from simultaneous observations with Fermi-LAT and MAGIC during the strongest flaring activity detected to date. Moreover, we interpret the SEDs from the four distinct activity states within the framework of one-component and two-component leptonic models, proposing specific scenarios that are able to reproduce the available multi-instrument data. We find significant long-term variability, especially in X-rays and VHE γ rays. Furthermore, significant (3-4σ) correlations were found between the radio, optical, and high-energy (HE) γ-ray fluxes, with the radio emission delayed by about ~400 days with respect to the optical and γ-ray bands. The spectral analysis reveals a harder-when-brighter trend during the non-flaring state in the X-ray domain. However, no clear patterns were observed for either the enhanced states or the HE (30 MeV < E < 100 GeV) and VHE γ-ray emission of the source. The indirect estimation of the redshift yielded a value of z = 0.45 ± 0.05, which is compatible with some of the values reported in the literature. The SEDs related to the low-activity state and the three flaring states of 1ES 0647+250 can be described reasonably well with the both one-component and two-component leptonic scenarios. However, the long-term correlations indicate the need for an additional radio-producing region located about 3.6 pc downstream from the gamma-ray producing region.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A physical method for downscaling land surface temperatures using surface energy balance theory

Fine-resolution land surface temperature (LST) derived from thermal infrared remote sensing images is a good indicator of surface water status and plays an essential role in the exchange of energy and water between land and atmosphere. A physical surface energy balance (SEB)-based LST downscaling method (DTsEB) is developed to downscale coarse remotely sensed thermal infrared LST products with fine-resolution visible and near-infrared data. Here, the DTsEB method is advantageous for its ability to mechanically interrelate surface variables contributing to the spatial variation of LST, to quantitatively weigh the contributions of each related variable within a physical framework, and to efficaciously avoid the subjective selection of scaling factors and the establishment of statistical regression relationships. The applicability of the DTsEB method was tested by downscaling 12 scenes of 990 m Moderate Resolution Imaging Spectroradiometer (MODIS) and aggregated Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) LST products to 90 m resolution at six overpass times between 2005 and 2015 over three 9.9 km by 9.9 km cropland (mixed by grass, tree, and built-up land) study areas. Three typical LST downscaling methods, namely the widely applied TsHARP, the later developed least median square regression downscaling (LMS) and the geographically weighted regression (GWR), were introduced for intercomparison. The results showed that the DTsEB method could more effectively reconstruct the subpixel spatial variations in LST within the coarse-resolution pixels and achieve a better downscaling accuracy than the TsHARP, LMS and GWR methods. The DTsEB method yielded, on average, root mean square errors (RMSEs) of 2.01 K and 1.42 K when applied to the MODIS datasets and aggregated ASTER datasets, respectively, which were lower than those obtained with the TsHARP method, with average RMSEs of 2.41 K and 1.71 K, the LMS method, with average RMSEs of 2.35 K and 1.63 K, and the GWR method, with average RMSEs of 2.38 K and 1.64 K, respectively. The contributions of the related surface variables to the subpixel spatial variation in the LST varied both spatially and temporally and were different from each other. In summary, the DTsEB method was demonstrated to outperform the TsHARP, LMS, and GWR methods and could be used as a good alternative for downscaling LST products from coarse to fine resolution with high robustness and accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Image Analysis for Rapid Assessment and Quality-Based Sorting of Corn Stover

Imaging in the visible spectrum is a low-cost tool that can be readily deployed for in-field or over-belt monitoring of biomass quality for bio-refining operations. Rapid image analysis coupled with innovative preprocessing may reduce the impacts of feedstock variability through identification of contaminants or other material attributes to guide selective sorting and quality management. Image analysis was employed to evaluate the quality of corn stover in red-green-blue (RGB) chromatic space. This study used controlled, bench-scale imaging as a proof-of-concept for rapid quality assessment of corn stover based on variations in material attributes, including chemical and physical attributes, that relate to biological degradation and soil contamination. Additionally, logistic regression-based classification algorithms were used to develop a method for biomass screening as a function of biological degradation or soil contamination. This study demonstrated the use of image analysis to extract features from RGB color space to investigate variations in critical material attributes from chemical composition of corn stover. Fourier transform infrared (FT-IR) suggested a correlation between red band intensity and biological degradation, while detailed surface texture analysis was found to distinguish among variations in ash. These insights offer promise for development of a rapid screening tool that could be deployed by farmers for in-field assessment of biomass quality or biorefinery operators for in-line sorting and process optimization.

09 BIOMASS FUELS↗
DOE OSTI2021

Diurnal observations of basal stem CO2 efflux in three canopy dominant trees in the central Amazon

We explored mechanisms responsible for disturbance-induced shifts in carbon metabolism in forests north of Manaus, Brazil (S2º 38' 17", W60º 09' 25"), using data from a selective logging experiment (BIONTE). BIONTE (the BIOmass and NuTrient Experiment) selective logging treatments were initiated in the mid-1980s and comprised variable removal of commercial tree (not total) species basal area (T1 =32%, T2 = 42%, T3 = 69%), and control plots with no logging (T0). Raw data including tree base diameter (Db), CO2 concentration versus time inside a static stem chamber, and wood density were used to derive stem respiration rates (Rw), wood production rates (Pw), and wood carbon use efficiency (CUE). Changes in tree base diameter (Db; measured at 1.3 m height, or above the buttresses) was used to calculate wood production for individual trees (Pw). Wood density enabled calculation of stem growth rate in the same units as stem respiration (mmol C m-2 s-1). Four trees were randomly selected from five tree growth rate classes for each treatment block, for a total of 20 trees per treatment block, or 80 trees total from the BIONTE plots. Each of the 80 trees selected for the Rw study were outfitted with dendrometer bands (da Silva et al. 2002). Stem respiration was measured using the method described in Chambers et al. (2004). Briefly, an infra-red gas analyzer (LiCor 820) was operated as a closed dynamic chamber with a flow rate of 1.0 L min-1. Polyvinyl chloride (PVC) semi-cylindrical chambers (250–400 mL) were secured to the tree stem near the dendrometer bands using nylon straps. The measurement interval spanned 1–2 min, and the CO2 flux from the stem of each tree was quantified using the enclosed stem area and slope of the stem CO2 concentration versus time.

54 ENVIRONMENTAL SCIENCES↗