Search NASA⌕ Search

SEARCH · Search NASA

Results for “WAVE DETECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Relationship of Topside Ionospheric Ion Outflows to Auroral Forms and Precipitation, Plasma Waves, and Convection Observed by Polar

The POLAR satellite often observes upflowing ionospheric ions (UFIs) in and near the aurora] oval on southern perigee (approx. 5000 km altitude) passes. We present the UFI features observed by the thermal ion dynamics experiment (TIDE) and the toroidal imaging mass angle spectrograph (TIMAS) in the dusk-dawn sector under two different geomagnetic activity conditions in order to elicit their relationships with auroral forms, wave emissions, and convection pattern from additional POLAR instruments. During the active interval, the ultraviolet imager (UVI) observed a bright discrete aurora on the duskside after the substorm onset and then observed a small isolated aurora form and diffuse auroras on the dawnside during the recovery phase. The UFIs showed clear conic distributions when the plasma wave instrument (PWI) detected strong broadband wave emissions below approx. 10 kHz, while no significant auroral activities were observed by UVI. At higher latitudes, the low-energy UFI conics gradually changed to the polar wind component with decreasing intensity of the broadband emissions. V-shaped auroral kilometric radiation (AKR) signatures observed above -200 kHz by PWI coincided with the region where the discrete aurora and the UFI beams were detected. The latitude of these features was lower than that of the UFI conics. During the observations of the UFI beams and conics, the lower-frequency fluctuations observed by the electric field instrument were also enhanced, and the convection directions exhibited large fluctuations. It is evident that large electrostatic potential drops produced the precipitating electrons and discrete auroras, the UFI beams, and the AKR, which is also supported by the energetic plasma data from HYDRA. Since the intense broadband emissions were also observed with the UFIs, the ionospheric ions could be energized transversely before or during the parallel acceleration due to the potential drops.

Hirahara, M.↗
NASA NTRS1997

Relationship of Topside Ionospheric Ion Outflows to Auroral Forms and Precipitations, Plasma Waves, and Convection Observed by POLAR

The POLAR satellite often observes upflowing ionospheric ions (UFls) in and near the auroral oval on southern perigee (approximately 5000 km altitude) passes. We present the UFI features observed by the thermal ion dynamics experiment (TIDE) and the toroidal imaging mass-angle spectrograph (TIMAS) in the dusk-dawn sector under two different geomagnetic activity conditions in order to elicit their relationships with auroral forms, wave emissions, and convection pattern from additional POLAR instruments. During the active interval, the ultraviolet imager (UVI) observed a bright discrete aurora on the dusk side after the substorm onset and then observed a small isolated aurora form and diffuse auroras on the dawn side during the recovery phase. The UFls showed clear conic distributions when the plasma wave instrument (PWI) detected strong broadband wave emissions below approximately 10 kHz, while no significant auroral activities were observed by UVI. At higher latitudes, the low-energy UFI conics gradually changed to the polar wind component with decreasing intensity of the broadband emissions. V-shaped auroral kilometric radiation (AKR) signatures observed above approximately 200 kHz by PWI coincided with the region where the discrete aurora and the UFI beams were detected. The latitude of these features was lower than that of the UFI conics. During the observations of the UFI beams and conics, the lower-frequency fluctuations observed by the electric field instrument (EFI) were also enhanced, and the convection directions exhibited large fluctuations. It is evident that large electrostatic potential drops produced the precipitating electrons and discrete auroras, the UFI beams, and the AKR, which is also supported by the energetic plasma data from HYDRA. Since the intense broadband emissions were also observed with the UFIs. the ionospheric ions could be energized transversely before or during the parallel acceleration due to the potential drops.

Hirahara, M.↗
NASA NTRS1991

Continuous wave laser for wind shear detection

Details of the design and development of a continuous-wave heterodyne carbon dioxide laser which has wind shear detection capabilities are given in viewgraph form. The goal of the development was to investigate the lower cost CW (rather than pulsed) lidar option for look-ahead wind shear detection from aircraft. The device has potential utility for ground based wind shear detection at secondary airports where the high cost of a Terminal Doppler Weather Radar system is not justifiable.

Nelson, Loren↗
NASA NTRS2008

CAWSES November 7-8, 2004, Superstorm: Complex Solar and Interplanetary Features in the Post-Solar Maximum Phase

The complex interplanetary structures during 7 to 8 Nov 2004 are analyzed to identify their properties as well as resultant geomagnetic effects and the solar origins. Three fast forward shocks, three directional discontinuities and two reverse waves were detected and analyzed in detail. The three fast forward shocks 'pump' up the interplanetary magnetic field from a value of approx.4 nT to ~44 nT. However, the fields after the shocks were northward, and magnetic storms did not result. The three ram pressure increases were associated with major sudden impulses (SI + s) at Earth. A magnetic cloud followed the third forward shock and the southward Bz associated with the latter was responsible for the superstorm. Two reverse waves were detected, one at the edge and one near the center of the magnetic cloud (MC). It is suspected that these 'waves' were once reverse shocks which were becoming evanescent when they propagated into the low plasma beta MC. The second reverse wave caused a decrease in the southward component of the IMF and initiated the storm recovery phase. It is determined that flares located at large longitudinal distances from the subsolar point were the most likely causes of the first two shocks without associated magnetic clouds. It is thus unlikely that the shocks were 'blast waves' or that magnetic reconnection eroded away the two associated MCs. This interplanetary/solar event is an example of the extremely complex magnetic storms which can occur in the post-solar maximum phase.

solar flares↗
NASA NTRS1985

The detection of global convective wave flows on the Sun

Global convective flows in the solar convection zone have been predicted by theoretical interpretations of the global-scale ordering of magnetic fields and activity centers and by theoretical analyses of rotating convection zones. Direct evidence of these flows in the photosphere has not previously been found despite several long-term efforts. The signatures of such flows have now been detected by analyzing the daily series of low-resolution Dopplergrams obtained at the Wilcox Solar Observatory at Stanford University. The signatures are patterns of alternating east and west flows with amplitudes on the order of 25 m/s and longitudinal extent of about 30 degrees. The patterns move across the disc at approximately the solar rotation rate and have lifetimes of at least several rotations. Boundaries of the fast and slow flows are often associated with large magnetic active regions.

Scherrer, P. H.↗
NASA NTRS1986

The detection of global convective wave flows on the sun

Global convective flows in the solar convection zone have been predicted by theoretical interpretations of the global-scale ordering of magnetic fields and activity centers and by theoretical analyses of rotating convection zones. Direct evidence of these flows in the photosphere has not previously been found despite several long-term efforts. The signatures of such flows have now been detected by analyzing the daily series of low-resolution Dopplergrams obtained at the Wilcox Solar Observatory at Stanford University. The signatures are patterns of alternating east and west flows with amplitudes on the order of 25 m/s and longitudinal extent of about 30 degrees. The patterns move across the disc at approximately the solar rotation rate and have lifetimes of at least several rotations. Boundaries of the fast and slow flows are often associated with large magnetic active regions.

Scherrer, Philip H.↗
NASA NTRS1985

CCE plasma wave observations during the storm of September 4, 5, 1984

Near 0700 on September 4, 1984 a series of interplanetary discontinuities arrived at earth when the AMPTE Charge Composition Explorer (CCE) was near apogee. During the next few hours the spacecraft passed in and out of the magnetosheath. At the magnetopause boundary, the CCE wave instrument detected strong electron plasma oscillations, weaker electromagnetic waves at the electron plasma frequency, and broadband electrostatic waves. During the subsequent perigee passes on September 4 and 5, the wave observations of upper hybrid resonance emissions, continuum radiation, electrostatic noise bands and unusual low latitude auroral kilometic radiation were used to monitor significant variations in the magnetospheric characteristics as the main storm phases developed.

Scarf, F. L.↗
NASA NTRS1989

Properties of whistler mode wave packets at the leading edge of steepened magnetosonic waves - Comet Giacobini-Zinner

The physical characteristics of high-frequency wave packets detected at the steepened edge of magnetosonic waves near Comet Giacobini-Zinner are explored, based on an examination of over 45 well-defined events. The results suggest that the wave packets play an important role in the reorientation and reduction in field magnitude from the steepened magnetosonic waves to the upstream ambient field. The observed properties of the wave packets are shown to be consistent with anomalously Doppler-shifted right-hand polarized waves.

Tsurutani, Bruce T.↗
NASA NTRS2003

Control of the Laser Interferometer Space Antenna

The detection of gravity waves will open a new window of observation on the universe. Unlike typical observatories, which detect electromagnetic waves traveling through space-time, the Laser Interferometer Space Antenna (LISA) will detect ripples in space-time itself. Science targets include galactic binaries, merging supermassive black holes, intermediate-mass/seed black holes, and cosmological backgrounds. Gravity waves are detected by measuring the strain in space, i.e. the change in distance between a set of masses (test masses or proof masses) separated by a great distance. Ground based detection of gravity waves by Laser Interferometer Gravitational Wave Observatory (LIGO) and other observatories are possible with laser interferometry; hut the relatively short arm length (4 km) and seismic noise limit the measurement band to above 10 Hz on Earth. LISA also uses laser interferometric measurement of the change in distance between test masses, but does it in space. Each LISA spacecraft embodies two test masses. Space allows very long arm lengths (5 million km for LISA) and a very quiet acceleration environment (3.5x10(exp -15) meters per second squared/Hertz (sup 0.5) for LISA), which allows for the detection of gravity wave strains to a best sensitivity of 3x10(exp -24) strain/Hertz (sup 0.5) over the measurement band of 10(exp -4) to 10(exp -1) Hertz for a one-year observation. The LISA mission consists of three spacecraft in heliocentric orbit. The orbits are chosen so that the three spacecraft form a roughly equilateral triangle with its center located at a radius of 1 AU and 20 degrees behind the Earth, as shown. Requirements are placed on the rotational and translational dynamics of each spacecraft to ensure that the proper sensitivity for science measurements can be achieved.

Maghami, Peiman↗
NASA NTRS2017

Identifying Ultra Low Frequency Waves in the Lunar Plasma Environment Using Trajectory Analysis and Resonance Conditions

Abstract Recent studies show that localized crustal magnetic fields on the lunar surface can reflect a significant portion of the incoming solar wind protons. These reflected ions can drive a wide range of plasma waves. It is difficult to determine the intrinsic properties of low-frequency waves with single-spacecraft observations, which can be heavily Doppler shifted. We describe a technique to combine trajectory analysis of reflected protons with the Doppler shift and resonance conditions to identify ultralow-frequency waves at the Moon. On 31 January 2014 plasma waves were detected by one of the Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) probes as it approached the lunar wake; these waves were not detected by the second ARTEMIS probe located upstream in the undisturbed solar wind. The observed waves had a frequency below the local ion cyclotron frequency and had right-hand circular polarization in the reference frame of the Moon. By solving the Doppler shift and the cyclotron resonance equations, we determined the conditions for reflected ions to excite the observed waves. Simulated trajectories of reflected ions correspond to ARTEMIS ion observations and support the hypothesis that reflected ions are the primary driver of the waves. By combining trajectory analysis with the resonance conditions, we identify scenarios where ions that satisfy the resonance conditions are present in the right location to generate the observed waves. Using this method, we can uniquely identify the observed waves as upstream propagating right-hand polarized waves, subject to the assumption that they are generated by cyclotron resonance with ions.

Magnetic↗
NASA NTRS2001

Mid-infrared trace gas detection using continuous-wave difference frequency generation in periodically poled RbTiOAsO4

A tunable mid-infrared continuous-wave (cw) spectroscopic source in the 3.4-4.5 micrometers region is reported, based on difference frequency generation (DFG) in a quasi-phase-matched periodically poled RbTiOAsO4 (PPRTA) crystal. DFG power levels of 10 microW were generated at approximately 4 micrometers in a 20-mm long PPRTA crystal by mixing two cw single-frequency Ti:Al2O3 lasers operating near 713 nm and 871 nm, respectively, using a laser pump power of 300 mW. A quasi-phase-matched infrared wavelength-tuning bandwidth (FWHM) of ~ 12 cm-1 and a temperature tuning rate of 1.02 cm-1/degree C were achieved. Experimental details regarding the feasibility of trace gas detection based on absorption spectroscopy of CO2 in ambient air using this DFG radiation source are also described.

NASA Discipline Life Sciences Technologies↗
NASA NTRS1983

Synthetic aperture radar imaging of ocean waves during the Marineland experiment

Wave contrast measurements are used to analyze X and L-band simultaneously obtained synthetic aperture radar (SAR) data of ocean gravity waves collected during the Marineland Experiment (1975). The results of the wave contrast measurements show that the ocean waves imaged by a SAR are more discernible using an X-band frequency than an L-band frequency and when the ocean waves are traveling in the range direction. It is determined that ocean waves can be detected by both X and L-band SAR, provided that the radar surface resolution is a small compared to the ocean wavelength. In addition, wave detection using L-band SAR can be improved by adjusting the focal distance and rotation of the cylindrical telescope in the SAR optical processor to account for wave motion. This adjustment is determined to be proportional to a value that is near the wave phase velocity.

Shuchman, R. A.↗
NASA NTRS2015

Detection of CFRP Composite Manufacturing Defects Using a Guided Wave Approach

NASA Langley Research Center is investigating a guided-wave based defect detection technique for as-fabricated carbon fiber reinforced polymer (CFRP) composites. This technique will be extended to perform in-process cure monitoring, defect detection and size determination, and ultimately a closed-loop process control to maximize composite part quality and consistency. The overall objective of this work is to determine the capability and limitations of the proposed defect detection technique, as well as the number and types of sensors needed to identify the size, type, and location of the predominant types of manufacturing defects associated with laminate layup and cure. This includes, porosity, gaps, overlaps, through-the-thickness fiber waviness, and in-plane fiber waviness. The present study focuses on detection of the porosity formed from variations in the matrix curing process, and on local overlaps intentionally introduced during layup of the prepreg. By terminating the cycle prematurely, three 24-ply unidirectional composite panels were manufactured such that each subsequent panel had a higher final degree of cure, and lower level of porosity. It was demonstrated that the group velocity, normal to the fiber direction, of a guided wave mode increased by 5.52 percent from the first panel to the second panel and 1.26 percent from the second panel to the third panel. Therefore, group velocity was utilized as a metric for degree of cure and porosity measurements. A fully non-contact guided wave hybrid system composed of an air-coupled transducer and a laser Doppler vibrometer (LDV) was used for the detection and size determination of an overlap By transforming the plate response from the time-space domain to the frequency-wavenumber domain, the total wavefield was then separated into the incident and backscatter waves. The overlap region was accurately imaged by using a zero-lag cross-correlation (ZLCC) imaging condition, implying the incident and backscattered waves are in phase over the overlap boundaries.

Hudson, Tyler B.↗
NASA NTRS2019

GWTC-1: A Gravitational-Wave Transient Catalog of Compact Binary Mergers Observedby LIGO and Virgo During the First and Second Observing Runs

We present the results from three gravitational-wave searches for coalescing compact binaries with component masses above1M during the first and second observing runs of the advanced gravitational-wave detector network. During the first observing run (O1), from September 12, 2015 to January 19, 2016, gravitational waves from three binary black hole mergers were detected. The second observing run (O2), which ran from November 30, 2016 to August 25, 2017, saw the first detection of gravitational waves from a binary neutron star in spiral, in addition to the observation of gravitational waves from a total of seven binary black hole mergers, four of which we report here for the first time: GW170729, GW170809, GW170818, and GW170823. For all significant gravitational-wave events, we provide estimates of the source properties. The detected binary black holes have total masses between18.6þ3.2−0.7M and 84.4þ15.8−11.1M and range in distance between 320þ120−110 and 2840þ1400−1360Mpc. No neutron star–black hole mergers were detected. In addition to highly significant gravitational-wave events, we also provide a list of marginal event candidates with an estimated false-alarm rate less than 1 per 30 days. From these results over the first two observing runs, which include approximately one gravitational-wave detection per 15 days of data searched, we infer merger rates at the 90% confidence intervals of 110−3840Gpc−3y−1 for binary neutron stars and 9.7−101Gpc−3y−1 for binary black holes assuming fixed population distributions and determine a neutron star–black hole merger rate 90% upper limit of 610Gpc−3y−1.

Astrophysics↗
NASA NTRS1995

Propagation of beam-driven VLF waves from the ionosphere toward the ground

As part of the Cooperative High Altitude Rocket Gun Experiment (CHARGE-2B) rocket mission, an electron beam was injected into the ionosphere with a modulated beam current in an effort to generate very low frequency (VLF) waves. The propagation of the beam-driven VLF waves through the ionosphere is examined here to determine whether it is possible to detect these wave emissions with ground receivers. The paths of the VLF waves from where they were generated near the rocket were followed to the bottom of the ionosphere and the decrease in wave amplitude due to wave-particle resonance and collisional damping was calculated. It was found that due to collisional damping, which for these VLF waves becomes large at altitudes below about 150 km, wave amplitudes were decreased below the background atmospheric noise level. A number of different beam injection events have been examined and in all of these cases studied the waves were sufficiently damped such that detection on the ground would not be possible. This is in agreement with observations on the ground in which no wave emissions were observed during the CHARGE-2B mission. Control parameters that would be more favorable for beam-generated VLF propagation to the ground are discussed for future experiments of this type.

Schriver, David↗
NASA NTRS1989

Test particle simulation study of whistler wave packets observed near Comet Giacobini-Zinner

Nonlinear interactions of water group ions with large-amplitude whistler wave packets detected at the leading edge of steepened magnetosonic waves observed near Comet Giacobini-Zinner (GZ) are studied using test particle simulations of water-ion interactions with a model wave based on GZ data. Some of the water ions are found to be decelerated in the steepened portion of the magnetosonic wave to the resonance velocity with the whistler wave packets. Through resonance and related nonlinear interaction with the large-amplitude whistler waves, the water ions become trapped by the packet. An energy balance calculation demonstrates that the trapped ions lose their kinetic energy during the trapped motion in the packet. Thus, the nonlinear trapping motion in the wave structure leads to effective energy transfer from the water group ions to the whistler wave packets in the leading edge of the steepened MHD waves.

Kaya, N.↗
NASA NTRS1977

Detection of severe storms through a tropospheric-ionospheric coupling mechanism

Acoustic-gravity waves were detected by a ground-based ionospheric sounding array, and the location of the wave generation source was determined by a reverse group ray path computation. Computed sources of these waves were located near locations where tornadoes touched down from 2 to 4 hours later. It is suggested that the overshooting and ensuing collapse of convective turrets may be responsible for generating the acoustic-gravity waves observed.

Hung, R. J.↗
NASA NTRS1980

Detection of Jovian whistler mode chorus - Implications for the Io torus aurora

Near the Io torus outer boundary (L of about 8), the Voyager 1 plasma wave instrument detected high frequency (f) waves near one-half the electron cyclotron frequency fc. High resolution waveform measurements demonstrate that these signals (f approximately equal to fc/2) are banded whistler mode chorus at f not greater than fc/2 and half-cyclotron frequency emissions with f slightly above fc/2. The density (about 2.5 per cu cm), the energy (a few keV), and the omnidirectional energy flux (100 ergs/sq cm-sec), of the electrons resonant with the chorus were determined.

Coroniti, F. V.↗