Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Wide-Bandgap Cu(In,Ga)S 2 Photocathodes Integrated on Transparent Conductive F:SnO 2 Substrates for Chalcopyrite-Based Water Splitting Tandem Devices

Recently, whole-chalcopyrite-based tandem devices for photoelectrochemical (PEC) water splitting have emerged as a promising route for obtaining ~20% solar-to-hydrogen efficiencies. Here we pursue this approach by demonstrating integration of the top cell wide-bandgap (E G ) chalcopyrite onto a transparent conductor, which is a critical step in the realization of tandem devices. We report specifically on our efforts to synthesize photoactive Cu(In,Ga)S 2 thin films on transparent conductive F:SnO 2 (FTO), while preserving the optoelectronic properties of the FTO substrate and preventing the formation of a resistive SnS x interfacial layer. We demonstrate that such attributes can be achieved via close-space sulfurization (CSS) of lower EG Cu(In,Ga)Se 2 precursors, co-evaporated on FTO at low-temperature. Depending on Cu(In,Ga)Se 2 precursors’ Ga and In content, the resulting Cu(In,Ga)S 2 solar absorbers have E G energies spanning 2.05 eV to 2.45 eV. The CSS process, which includes a low-temperature annealing in sulfur vapor followed by a high-temperature crystallization under inert atmosphere, allowed for up to 95% Se substitution with S in the chalcopyrite lattice, tuning both E G and band edge positions that impact PEC performance. Photoelectrochemical measurements performed under AM1.5G illumination in 0.5M H 2 SO 4 on the 2.05 eV CuInGaS 2 photocathode revealed a saturation photocurrent density (J SAT ) of -5.25 mA/cm 2 , a value corresponding to 38% of the absorber’s optical limit. We further concluded that such low J SAT originates from sub-par optical absorption of Cu(In,Ga)S 2 absorbers. Further enhancements of the CSS process are expected to improve material quality towards our end goal of achieving whole-chalcopyrite tandem PEC devices.

08 HYDROGEN↗

Expression of a clostridial [FeFe]-hydrogenase in Chlamydomonas reinhardtii prolongs photo-production of hydrogen from water splitting

The high oxygen (O 2 ) sensitivity of green algal [FeFe]-hydrogenases is a significant limitation for the sustained production of hydrogen gas (H 2 ) from photosynthetic water splitting. To address this limitation we replaced the native [FeFe]-hydrogenases with a more O 2 -tolerant clostridial [FeFe]-hydrogenase CaI in Chlamydomonas reinhardtii strain D66ΔHYD ( hydA1 – hydA2 – ) that contains insertionally inactivated [FeFe]-hydrogenases genes. Expression and translocation of CaI in D66ΔHYD led to the recovery of H 2 photoproduction at ~ 20% of the rates of the wild-type parent strain D66. We show for the first time that a bacterial [FeFe]-hydrogenase can be expressed, localized and matured to a catalytically active form that couples to photosynthetic electron transport in the green alga C. reinhardtii . The lower rates of O 2 inactivation of CaI led to more sustained H 2 photoproduction when cultures were challenged with O 2 or kept under prolonged illumination at solar intensities. Lastly, these results provide new insights into the requisites for attaining photobiological H 2 production from water splitting using a more O 2 -tolerant hydrogenase.

08 HYDROGEN↗

Investigation of p-type Ca 2 Fe 2 O 5 as a Photocathode for Use in a Water Splitting Photoelectrochemical Cell

Ca 2 Fe 2 O 5 is a p-type oxide that has not been previously investigated as a photocathode for use in a water splitting photoelectrochemical cell. In this study, Ca 2 Fe 2 O 5 was synthesized as a polycrystalline electrode, and its properties relevant to photoelectrochemical hydrogen production were investigated. Ca 2 Fe 2 O 5 electrodes were prepared by thermally annealing electrodeposited FeOOH films with a solution of Ca(NO 3 ) 2 drop-casted onto the electrode surface. The bandgap energy, band edge positions, flatband potential, photocurrent generation, and chemical and photoelectrochemical stabilities of Ca 2 Fe 2 O 5 were examined. The results showed that Ca 2 Fe 2 O 5 has an ideal bandgap and band positions that can enable the utilization of visible light for overall solar water splitting. Photocurrent-time measurements were also performed and the changes in morphology, crystallinity, and composition of the Ca 2 Fe 2 O 5 electrodes before and after the photocurrent measurement were investigated. Furthermore, this made it possible to examine the photostability of Ca 2 Fe 2 O 5 and elucidate the cause of the observed photocurrent decay.

25 ENERGY STORAGE↗

Fabrication of cation-doped BaTaO{sub 2}N photoanodes for efficient photoelectrochemical water splitting under visible light irradiation

A series of cation-doped BaTaO{sub 2}N particle was synthesized to control the donor density in the bulk for improving the performance of photoelectrochemical water splitting on porous BaTaO{sub 2}N photoanodes under visible light. Among the dopants (Mo{sup 6+}, W{sup 6+}, Zr{sup 4+}, and Ti{sup 4+}) examined, Mo{sup 6+} cations can be introduced into the Ta{sup 5+} site up to 5 mol. % without producing any impurity phases; the donor density of BaTaO{sub 2}N was indeed increased significantly by introducing higher ratio of Mo{sup 6+} dopant. The porous photoanodes of Mo-doped BaTaO{sub 2}N showed much higher photocurrent than others including undoped one and also exhibited much improved performance in photoelectrochemical water splitting into H{sub 2} and O{sub 2} after loaded with cobalt oxide cocatalyst and coupled with Pt counter electrode.

36 MATERIALS SCIENCE↗

High-Performance Overall Water Splitting Electrocatalysts Derived from Cobalt-Based Metal–Organic Frameworks

The design of active, robust, and nonprecious electrocatalysts with both H 2 and O 2 evolution reaction (HER and OER) activities for overall water splitting is highly desirable but remains a grand challenge. Here in this article, we report a facile two-step method to synthesize porous Co-P/NC nanopolyhedrons composed of CoP x (a mixture of CoP and Co 2 P) nanoparticles embedded in N-doped carbon matrices as electrocatalysts for overall water splitting. The Co-P/NC catalysts were prepared by direct carbonization of Co-based zeolitic imidazolate framework (ZIF-67) followed by phosphidation. Benefiting from the large specific surface area, controllable pore texture, and high nitrogen content of ZIF (a subclass of metal–organic frameworks), the optimal Co-P/NC showed high specific surface area of 183 m 2 g -1 and large mesopores, and exhibited remarkable catalytic performance for both HER and OER in 1.0 M KOH, affording a current density of 10 mA cm -2 at low overpotentials of -154 mV for HER and 319 mV for OER, respectively. Furthermore, a Co-P/NC-based alkaline electrolyzer approached 165 mA cm -2 at 2.0 V, superior to that of Pt/IrO 2 couple, along with strong stability. Various characterization techniques including X-ray absorption spectroscopy (XAS) revealed that the superior activity and strong stability of Co-P/NC originated from its 3D interconnected mesoporosity with high specific surface area, high conductivity, and synergistic effect of CoP x encapsulated within N-doped carbon matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonolysis Under NH 3 –Limiting Conditions as a Pathway to Improved LaTiO 2 N Water Splitting Photoanodes

LaTiO 2 N is a promising intermediate band gap semiconductor for the water splitting reaction, a pathway to hydrogen fuel from solar energy. However, the photoelectrochemical (PEC) activity of the material is hindered by defects, particularly Ti(III) species, which promote photocarrier recombination. These defects are formed during the high-temperature ammonolysis reaction. Here we show that improved LaTiO 2 N materials can be synthesized under NH 3 -limiting conditions by introducing N 2 to lower the NH 3 partial pressure to0.13atm.This reduces the Ti(III) defect density in the material from 6.06 × 10 16 to ∼4.61 × 10 15 cm −3 , by a factor of 13, based on electron paramagnetic resonance (EPR) spectroscopy. Any remaining Ti(III) defects are localized at the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy (XPS), due to the formation of a depletion layer in the semico. Optical absorption spectra of the improved LaTiO 2 N reveal a blue-shifted band gap absorption edge and a suppressed sub-band gap absorption. Defect removal also reduces a sub-band gap surface photovoltage feature visible in the 1.0 atm reference material. The improved LaTiO 2 N supports a 1.57 mA cm −2 water oxidation photocurrent at 1.23 V RHE under simulated sunlight conditions, and an enhanced quantum efficiency of 4.5% (400 nm) for photocatalytic oxygen evolution from aqueous silver nitrate solution. Stable PEC operation is observed for over 55 min. This confirms that ammonolysis under NH 3 -limiting conditions improves the solar energy conversion properties of LaTiO 2 N. The ability to control metal ion defects in oxynitrides by varying the ammonia partial pressure during ammonolysis might be generally useful for the preparation of metal nitrides and oxynitrides.

defects↗

Unassisted Water Splitting Using a GaSb x P (1- x ) Photoanode

Here in this work, unbiased water splitting with 2% solar-to-hydrogen efficiency under AM 1.5 G illumination using new materials based on GaSb 0.03 P 0.97 alloy is reported. Freestanding GaSb x P 1-x is grown using halide vapor phase epitaxy. The native conductivity type of the alloy is modified by silicon doping, resulting in an open-circuit potential (OCP) of 750 mV, photocurrents of 7 mA cm -2 at 10 sun illumination, and corrosion resistance in an aqueous acidic environment. Alloying GaP with Sb at 3 at% improves the absorption of high-energy photons above 2.68 eV compared to pure GaP material. Electrochemical Impedance Spectroscopy and illuminated OCP measurements show that the conduction band of GaSb x P 1-x is at -0.55 V versus RHE irrespective of the Sb concentration, while photocurrent spectroscopy indicates that only radiation with photon energies greater than 2.68 eV generate mobile and extractable charges, thus suggesting that the higher-laying conduction bands in the Γ 1 valley of the alloys are responsible for exciton generation.

36 MATERIALS SCIENCE↗

Ultrafine Pt Nanoparticle-Decorated Pyrite-Type CoS 2 Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional Electrode for Overall Water Splitting

To improve the utilization efficiency of precious metals, metal-supported materials provide a direction for fabricating highly active and stable heterogeneous catalysts. Here, carbon cloth (CC)-supported Earth-abundant CoS 2 nanosheet arrays (CoS 2 /CC) are presented as ideal substrates for ultrafine Pt deposition (Pt-CoS 2 /CC) to achieve remarkable performance toward the hydrogen and oxygen evolution reactions (HER/OER) in alkaline solutions. Notably, the Pt-CoS 2 /CC hybrid delivers an overpotential of 24 mV at 10 mA cm –2 and a mass activity of 3.89 A Ptmg –1 , which is 4.7 times higher than that of commercial Pt/C, at an overpotential of 130 mV for catalyzing the HER. An alkali-electrolyzer using Pt-CoS 2 /CC as a bifunctional electrode enables a water-splitting current density of 10 mA cm –2 at a low voltage of 1.55 V and can sustain for more than 20 h, which is superior to that of the state-of-the-art Pt/C+RuO 2 catalyst. Further experimental and theoretical simulation studies demonstrate that strong electronic interaction between Pt and CoS 2 synergistically optimize hydrogen adsorption/desorption behaviors and facilitate the in situ generation of OER active species, enhancing the overall water-splitting performance. This research highlights the regulation of interfacial and electronic synergy in pursuit of highly efficient and durable supported catalysts for hydrogen and oxygen electrocatalytic applications.

36 MATERIALS SCIENCE↗

Electronic structure and reactivity in water splitting of the iron oxide dimers and their hexacarbonyls: A density functional study

The iron oxide dimers (FeO){sub 2} and their peroxide isomers are studied with the B3LYP density functional as bare clusters and as hexacarbonyls. Among the bare clusters the planar four-member ring structures are more stable than the non-planar ones and the rhombic dioxide Fe{sub 2}O{sub 2} with antiferromagnetically ordered electrons on iron centers is the global minimum. Water adsorption on the bare diiron dioxide is exothermic, but dissociation does not occur. Carbonylation favors a non-planar Fe{sub 2}O{sub 2} ring for both the dioxides and the peroxides and high electron density at the Fe centers is induced, evidenced by the natural charge distribution, the high proton affinity, and the values of global electronegativity and hardness. The iron dioxide hexacarbonyl Fe{sub 2}O{sub 2}(CO){sub 6} is diamagnetic in the state of the global minimum. It is separated from the next low-lying triplet state by a small energy gap of 0.22 eV. Time-dependent density functional theory methods were applied to examine electron excitations from the ground state to the low-lying triplet states in the hexacarbonyls and their adsorption complexes with water. Singlet-to-triplet state excitations occur via ligand-to-metal charge transfer in the hexacarbonyls; in the adsorption complexes excitations from the oxygen lone pairs to the adsorption center also occur and they appear in the IR-visible region. The lowest energy singlet and triplet state reaction paths for water splitting were followed. On the singlet potential energy surface (PES), water splitting is spontaneous, while for the triplet PES an activation barrier of 14.1 kJ mol{sup −1} was determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unassisted solar water splitting with 9.8% efficiency and over 100 h stability based on Si solar cells and photoelectrodes catalyzed by bifunctional Ni–Mo/Ni

Designing a highly efficient and stable photoelectrochemical (PEC) tandem cell for unassisted solar water splitting is considered a promising approach for large-scale solar energy storage. To date, various tandem device configurations have been reported. However, the achievement of a solar-to-hydrogen conversion efficiency (η STH ) of 10% is still full of challenges, due to the incompatibility between the two photoelectrode materials. Here, we report a highly efficient and stable photovoltaic (PV)–PEC tandem device composed of a dual Si photoelectrode and two series-connected ordinary Si PV cells. The dual-photoelectrode device consists of an n + np + -Si photocathode and p + pn + -Si photoanode, which allow back illumination from the Si substrate, spatially and functionally decoupling the optical absorption and the catalytic activity. By further employing a Ni protective layer together with a bifunctional Ni–Mo catalyst for both the Si photocathode and photoanode, the PV–PEC tandem cell can perform spontaneous water splitting without any applied bias. A high η STH of 9.8% with a stability of over 100 h was achieved in alkaline solution under parallel AM 1.5G 1 sun illumination. Furthermore, this work essentially allows a modular independent optimization of each component which can enhance the efficiency and stability of the PV–PEC cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Titanium and Magnesium Co-Alloyed Hematite Thin Films for Photoelectrochemical Water Splitting

Using a combination of density functional theory calculation and materials synthesis and characterization we examine the properties of charge-compensated Ti and Mg co-alloyed hematite thin films for the application of photoelectrochemical (PEC) water splitting. We find that the charge-compensated co-alloying results in the following effects: (1) It enhances the solubility of Mg and Ti, which leads to reduced electron effective mass and therefore increased electron mobility; (2) It tunes the carrier density and therefore allows the optimization of electrical conductivity; and (3) It reduces the density of charged defects and therefore reduces carrier recombination. As a result, the Ti and Mg co-alloyed hematite thin films exhibit improved water oxidation photocurrent magnitudes as compared to pure hematite thin films. Our results suggest that charge-compensated co-alloying is a plausible approach for engineering hematite for the application of PEC water splitting.

08 HYDROGEN↗

Porous SiC nanowire arrays as stable photocatalyst for water splitting under UV irradiation

Highlights: Black-Right-Pointing-Pointer Arrays of porous SiC nanowires prepared by a facile in situ carbonizing method. Black-Right-Pointing-Pointer Utilizing the SiC nanowire arrays as photocatalysis for water splitting. Black-Right-Pointing-Pointer Excellent photocatalytic performance under the UV irradiation. Black-Right-Pointing-Pointer Very high stability of the SiC nanowire photocatalyst. -- Abstract: In this study, we report the fabrication and photocatalytic properties of the oriented arrays of SiC nanowires on the Si substrate. The SiC nanowire arrays were prepared by carbonizing the Si nanowire arrays with the graphite powder at 1250 Degree-Sign C. The as-prepared SiC nanowires are highly porous, which endows them with a high surface-to-volume ratio. Considering the large surface areas and the high stability, the porous SiC nanowire arrays were used as photocatalyst for water splitting under UV irradiation. It was found that such porous SiC structure exhibited an enhanced and extremely stable photocatalytic performance.

36 MATERIALS SCIENCE↗

Tandem particle-slurry batch reactors for solar water splitting (Final Scientific/Technical Report)

Economically, particle slurry reactors are projected to be one of the most promising technologies for solar photoelectrochemical hydrogen production, according to a 2009 techno-economic analysis commissioned by the US DOE and performed by Directed Technologies, Inc. The Fuel Cell Technologies Office’s Multi-Year Research, Development and Demonstration (MYRD&D) goals and targets are to reduce the cost of H 2 produced from renewable sources at the plant gate (i.e. not including delivery, dispensing, or storage) to < $2.00/gge, equivalent to ~$2.00/kg H 2 . Research results from our techno-economic modeling research suggest that this target could be met using particle slurry reactors assuming STH efficiencies in the range of 5 – 10%, materials lifetimes of < 1 year, and nanoparticles that cost up to 20 times more than projected costs of TiO 2 -coated Fe 2 O 3 nanoparticles. Although most large worldwide research efforts directed at solar photoelectrochemical hydrogen production focus on wafer-based designs, the projected lower cost for a particle slurry reactor at these disparate projected STH efficiencies clearly suggests that particle slurry reactors could be a scalable and deployable technology, assuming several challenges are overcome. These major technological challenges include the demonstration of a vertically-stacked-vessel architecture that is capable of operating sustainably while mostly relying on diffusion and natural convection to mix the redox shuttles between the vessels, and the demonstration that photocatalyst particles can operate at an overall 1% STH efficiency or larger when incorporated into this two-vessel design. Our research adds to the understanding of photocatalytic reactors for solar water splitting through numerical modeling results and experimental results. Numerical models were developed to simulate relevant device physics including particle and reactor dimensions which affect optical, transport, and rheological properties, electrocatalytic and photovoltaic properties of particles at various temperatures, and properties of redox shuttles and separators. Moreover, theoretical maximum solar-to-hydrogen efficiencies for ensembles of particles like in photocatalyst reactors were modeled and simulated and shown to equal or exceed those of photoelectrochemical designs under most scenarios. These results help determine constraints on the reactor that will enable more optimal designs for future prototypes. In parallel, experiments were performed to identify the most effective redox shuttles and to empirically validate the numerical models and simulations. Toward the latter, state-of-the-art light-absorbing particles and electrocatalysts were synthesized and characterized physically and photoelectrochemically for water electrolysis and redox chemistry with redox shuttles in the form factor of mesoporous electrodes and free-floating particles. The most promising materials candidates were used in a suspension reactor to evaluate performance toward photocatalytic H 2 production and results from the two measurements were compared. Predominantly, state-of-the-art cocatalyst-modified Rh-doped SrTiO 3 and BiVO 4 particles were further characterized to assess for their ability to perform visible-light-driven H 2 and O 2 evolution, respectively, and results were similar to those reported for the state-of-the-art in the peer-reviewed literature. Outcomes from this work inform the public of the effectiveness and promise of solar photocatalytic water splitting for clean and renewable hydrogen production. This work may also help increase research interest and funding for photocatalysis projects, which will accelerate development of a technology that will benefit the public by generating fuel while emitting few greenhouse gases and pollutants.

08 HYDROGEN↗

Editorial: Advanced water splitting technologies development: Best practices and protocols

As the level of deployment and utilization of renewable energy sources, including wind and solar, continues to rise, large-scale, long-term energy storage technologies that could accommodate weekly and seasonal energy fluctuations will play a significant role in the overall deployment of renewable energies in the future. Harnessing and storing renewable energy resources via electrochemical, photoelectrochemical, or thermochemical processes by converting renewable energy into sustainable (energy storage) fuels have the potential to meet the long-term, terawatt scale energy storage challenge. Renewable hydrogen production is the cornerstone for sustainable fuel production and deep decarbonization of multiple sectors in our society. Cost-competitive clean hydrogen provides value to applications, such as 1) in the transportation sector for fuel cell vehicles, 2) in the electric grid sector for system stability and load balancing, and 3) in the industrial sector with metal refineries, cement production, and biomass upgrading (carbon-free fertilizer production). In addition, coupling clean renewable hydrogen with the carbon and nitrogen cycles enables known and well-established thermal-chemical processes to generate renewable hydrocarbon fuels and ammonia. The Advanced Water Splitting Technologies (AWST): low temperature electrolysis (LTE), high temperature electrolysis (HTE), photoelectrochemical (PEC) and solar thermo-chemical hydrogen (STCH) provide four unique and parallel approaches to produce low cost, low greenhouse gas (GHG) emission hydrogen at scale (Figure 1). Cost competitive clean hydrogen production using these four technologies is a current high priority focus for governments and industry. In June of 2022, the U.S. Department of Energy (DOE) launched the first in a series of Earthshot Initiatives. The Hydrogen Shot, “1 1 1” aims to reduce the cost of clean hydrogen by more than 80% to one dollar per one kilogram in 1 decade ($\$$1/kg H 2 ). The European Green Deal and the International Energy Agency (IEA) have implemented a strong focus on green hydrogen production for a clean and secure energy future.

benchmarking, low temperature electrolysis↗

Pulsed laser deposition of delafossite oxide thin films on YSZ (001) substrates as solar water splitting photocathodes

Development of solar energy converters with earth-abundant and environmentally friendly materials is one of the key routes explored towards a sustainable future. In this work, crystalline delafossite-phase CuAlO 2 and CuFeO 2 thin film solar water splitting photocathodes were fabricated using pulsed laser deposition. It was found that the desired delafossite phase was formed only after high temperature annealing in an oxygen-free atmosphere. Further, the homogeneous delafossite bulk structure of the films was determined by correlating simulation results from first-principles calculations with synchrotron-based X-ray absorption near edge structure (XANES) spectroscopy. Both CuAlO 2 and CuFeO 2 photocathodes are active for solar water splitting, with the latter more efficient due to its narrower band gap and improved light absorption.

36 MATERIALS SCIENCE↗

Effects of Anionic Polymer Modification of Dye‐Sensitized Niobate Photocatalysts on Solar‐Driven Z‐Scheme Overall Water Splitting

Pt‐intercalated calcium niobate nanosheets (Pt/HCa 2 Nb 3 O 10 ) sensitized by a Ru(II) complex dye are good photocatalysts for producing H 2 from aqueous solutions containing I − as a reversible electron donor. These materials are applicable to Z‐scheme overall water splitting in combination with a WO 3 ‐based O 2 ‐evolving photocatalyst under simulated sunlight. In this work, the effects of anionic polymer modification of the dye‐sensitized nanosheets are examined by adsorbing sodium poly(styrenesulfonate) (PSS), sodium polyacrylate, sodium polymethacrylate (PMA), or sodium poly(4‐styrenesulfonic‐ co ‐maleic acid) onto the dye‐sensitized nanosheet surface. For half‐cell H 2 ‐evolution reaction in the presence of NaI, all of the polymers have a positive impact on the activity under visible light at lower light intensity, whereas only PMA is effective under high light‐intensity condition. For Z‐scheme overall water splitting with PtO x /H‐Cs‐WO 3 , PSS and PMA give almost the same solar‐to‐hydrogen energy conversion efficiencies (0.12% ± 0.01%) under optimized conditions. However, PMA operates better than PSS at relatively low and high NaI concentrations, which are in general disadvantageous for the H 2 ‐ and O 2 ‐evolving components of the Z‐scheme, respectively.

Energy & Fuels↗

Activated Carbon Catalysts for the Production of Hydrogen for the Sulfur-Iodine Thermochemical Water Splitting Cycle

Seven activated carbon catalysts obtained from a variety of raw material sources and preparation methods were examined for their catalytic activity to decompose hydroiodic acid (HI) to produce hydrogen; a key reaction in the sulfur-iodine (S-I) thermochemical water splitting cycle. Activity was examined under a temperature ramp from 473 to 773 K. Within the group of ligno-cellulosic steam-activated carbon catalysts, activity increased with surface area. However, both a mineral-based steam-activated carbon and a ligno-cellulosic chemically-activated carbon displayed activities lower than expected based on their higher surface areas. In general, ash content was detrimental to catalytic activity while total acid sites, as determined by Bohem’s titrations, seemed to favor higher catalytic activity within the group of steam-activated carbons. These results suggest, one more time, that activated carbon raw materials and preparation methods may have played a significant role in the development of surface characteristics that eventually dictated catalyst activity and stability as well.

08 HYDROGEN↗

How Beneficial Is Pretraining on a Narrow Domain-Specific Corpus for Information Extraction about Photocatalytic Water Splitting?

Language models trained on domain-specific corpora have been employed to increase the performance in specialized tasks. However, little previous work has been reported on how specific a “domain-specific” corpus should be. Here, we test a number of language models trained on varyingly specific corpora by employing them in the task of extracting information from photocatalytic water splitting. We find that more specific corpora can benefit performance on downstream tasks. Furthermore, PhotocatalysisBERT, a pretrained model from scratch on scientific papers on photocatalytic water splitting, demonstrates improved performance over previous work in associating the correct photocatalyst with the correct photocatalytic activity during information extraction, achieving a precision of 60.8(+11.5)% and a recall of 37.2(+4.5)%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗