Search NASA⌕ Search

SEARCH · Search NASA

Results for “Wind Speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Magnitude and frequency of wind speed shears and associated downdrafts

Data are presented indicating the frequency of occurrence of wind shear and downdrafts together with information on the simultaneous occurrence of these two phenomena. High resolution wind profile measurements recorded at a 150 meter ground winds tower facility were used for the analysis. From instantaneous measurements during horizontal wind speeds of gale-force and below intensity, vertical motion at the 10, 60, and 150 m levels was approximately 60 percent downward and 40 percent upward. At the 18 level the percentages were reversed. Updraft maxima were an order of magnitude or two greater than downdrafts at all levels. Frequency of vertical motion or = 9.7 kts for a year at four levels was 338 occurrences upward and 274 downward. Approximately 90 percent of these updrafts occurred at the 18 m level almost equally during summer and winter, and 65 percent of the downdrafts were at the 150 m level during summer.

Alexander, M. B.↗
NASA NTRS1993

NASA Lewis 9- by 15-foot low-speed wind tunnel user manual

This manual describes the 9- by 15-Foot Low-Speed Wind Tunnel at the Lewis Research Center and provides information for users who wish to conduct experiments in this atmospheric facility. Tunnel variables such as pressures, temperatures, available tests section area, and Mach number ranges (0.05 to 0.20) are discussed. In addition, general support systems such as air systems, hydraulic system, hydrogen system, laser system, flow visualization system, and model support systems are described. Instrumentation and data processing and acquisition systems are also discussed.

Soeder, Ronald H.↗
NASA NTRS1994

Background noise levels measured in the NASA Lewis 9- by 15-foot low-speed wind tunnel

The acoustic capability of the NASA Lewis 9 by 15 Foot Low Speed Wind Tunnel has been significantly improved by reducing the background noise levels measured by in-flow microphones. This was accomplished by incorporating streamlined microphone holders having a profile developed by researchers at the NASA Ames Research Center. These new holders were fabricated for fixed mounting on the tunnel wall and for an axially traversing microphone probe which was mounted to the tunnel floor. Measured in-flow noise levels in the tunnel test section were reduced by about 10 dB with the new microphone holders compared with those measured with the older, less refined microphone holders. Wake interference patterns between fixed wall microphones were measured and resulted in preferred placement patterns for these microphones to minimize these effects. Acoustic data from a model turbofan operating in the tunnel test section showed that results for the fixed and translating microphones were equivalent for common azimuthal angles, suggesting that the translating microphone probe, with its significantly greater angular resolution, is preferred for sideline noise measurements. Fixed microphones can provide a local check on the traversing microphone data quality, and record acoustic performance at other azimuthal angles.

Woodward, Richard P.↗
NASA NTRS2022

9- by 15-Foot Low-Speed Wind Tunnel Acoustic Upgrade Part 1: Supporting Studies

The 9- by 15-Foot Low Speed Wind Tunnel at NASA Glenn Research Center was refurbished in a major construction project starting in June 2017 and ending in March 2019, with some interruptions. Studies supporting this effort started years earlier and continued through the end of construction. The focus of the refurbishment project was to reduce the background noise in the test section during operation. The major focus of the supporting studies was the wind tunnel flow surface. These studies included roughness noise testing of samples, impedance measurements, computational simulations and analysis. NASA Langley and Ames Research Centers both contributed, as did Virginia Polytechnic Institute and State University. This report describes the major efforts and findings of the supporting studies.

Wind Tunnel↗
NASA NTRS1995

Solar Wind Speed Structure in the Inner Corona at 3-12R(sub)O

Estimates of solar wind speed obtained by Armstrong et al. [1986] based on 1983 VLA multiple-station intensity scintillation measurements inside 12 R(sub)O have been compared with white light coronagraph measurements.

solar wind corona radio astronomy↗
NASA NTRS1973

Cruise Drag Results from High Speed Wind Tunnel Tests of NASA Refan JT8D Engine Nacelles on the Boeing 727-200

High speed wind tunnel test results are presented showing the cruise drag effect of installing JT8D-109 Refan engines on a Boeing 727-200. Incremental drags of a refan center inlet and side nacelles are presented for several configuration variations. Static pressure distributions were obtained on the side nacelle strut and on the fuselage (above and below the strut). Oil flow photographs of selected configurations are also presented. In general the drag level of the refan installation is slightly better than predicted prior to the test and the drag rise is favorable.

Easterbrook, W. G.↗
NASA NTRS1972

Twenty-seven-day recurrences in the solar-wind speed - Mariner 2.

Results of an autocorrelation analysis of the Mariner 2 data concerning solar-wind speed obtained in late 1962. A statistically significant correlation associated with the solar rotation has been found near a lag of 27 days; however, the amplitude of the correlation is only about 0.4, in essential agreement with measurements of Vela 2 and 3 during the period from July 1964 to July 1967. The relatively modest correlation is interpreted to mean that a number of speed structures observed by Mariner 2 did not endure for more than one solar rotation; those structures that did endure evolved significantly in shape, amplitude, and solar longitude from one solar rotation to the next. The analysis also shows that typical solar-wind structures occupied about 30 to 45 deg in solar longitude near 1 AU.

Gosling, J. T.↗
NASA NTRS1976

IPS observations of the solar wind speed out of the ecliptic

Interplanetary scintillation observations from 1971-1975 show that the average solar wind speed increases away from the solar equator, with a mean gradient of 2.1 km/s per degree. These results are compared with spacecraft observations over the + or - 7 deg attainable in the ecliptic and with those deduced from comet tails. The role of temporal variations, especially those caused by latitude dependent solar wind streams, is emphasized, and this points to the need for extensive ecliptic and ground-based observations during an out-of-the-ecliptic spacecraft mission.

Coles, W. A.↗
NASA NTRS1978

The power spectrum of the solar wind speed for periods greater than 10 days

The use of the more than 11 years of solar wind speed data obtained by Vela 2-6 and Imp 6-8 to study the power spectrum of speed variations in the range near the solar rotational frequency is discussed. The broad bands of power near periods of 27 days (corresponding to the rotational period of the sun), 13.5 days, and higher harmonics are characterized, and it is suggested that the described individual peaks in both the solar wind and the geomagnetic spectra are probably not due to differential rotation. The alternate explanation is that the multipeak nature of the power spectra are explained by a wave packet concept in which recurring highspeed streams are described as a series of pulses (separated by a constant period) that last for a varying number of solar rotations.

Fenimore, E. E.↗
NASA NTRS2018

Preliminary Aerodynamic Measurements from a Magnetic Suspension and Balance System in a Low-Speed Wind Tunnel

An existing Magnetic Suspension and Balance System (MSBS) has been restored to operation in a small (octagonal test section, 6-inches across flats) low-speed wind tunnel as the first phase of a project to develop new dynamic test capabilities for planetary entry capsules at supersonic speeds. The MSBS and associated wind tunnel were originally designed and built at MIT and were subsequently relocated to NASA Langley Research Center. NASA ceased operations of the system in the late 1990s and it was transferred to Old Dominion University where it had been mothballed until the present work started in 2015. All-new position sensor electronics, electromagnet power supplies, digital controller, and other hardware have been developed, leading to more efficient and reliable operation. Important features of the new hardware will be briefly described. Wind tunnel testing has commenced, focusing first on static aerodynamics of re-entry capsule shapes. Some preliminary results will be reviewed, including comparison to reference data. The proposed extension to dynamic stability testing, using a variety of free-to-pitch approaches will be described. Finally, the preliminary design of the all-new Phase II (supersonic) system will be briefly outlined.

Schoenenberger, Mark↗
NASA NTRS1988

Contraction design for small low-speed wind tunnels

An iterative design procedure was developed for 2- or 3-dimensional contractions installed on small, low speed wind tunnels. The procedure consists of first computing the potential flow field and hence the pressure distributions along the walls of a contraction of given size and shape using a 3-dimensional numerical panel method. The pressure or velocity distributions are then fed into 2-dimensional boundary layer codes to predict the behavior of the boundary layers along the walls. For small, low speed contractions, it is shown that the assumption of a laminar boundary layer originating from stagnation conditions at the contraction entry and remaining laminar throughout passage through the successful designs is justified. This hypothesis was confirmed by comparing the predicted boundary layer data at the contraction exit with measured data in existing wind tunnels. The measured boundary layer momentum thicknesses at the exit of four existing contractions, two of which were 3-D, were found to lie within 10 percent of the predicted values, with the predicted values generally lower. From the contraction wall shapes investigated, the one based on a 5th order polynomial was selected for newly designed mixing wind tunnel installation.

Bell, James H.↗