Search NASA⌕ Search

SEARCH · Search NASA

Results for “anion redox”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Iron redox behavior and oxygen reduction activity of Fe-N-C electrocatalysts in different electrolytes

The iron redox behavior and oxygen reduction reaction (ORR) activity of Fe-N-C ORR electrocatalysts synthesized by a variety of techniques were investigated as a function of the identity of the electrolyte anion (bisulfate/sulfate or perchlorate) at a constant pH. In situ X-ray absorption spectroscopy data support the assignment of the redox peaks in the voltammograms to the Fe 3+ /Fe 2+ redox couple. It was found that for a given Fe-N-C catalyst, there is a correlation between the Fe redox couple peak potential and the ORR activity in perchloric acid electrolyte, but not in sulfuric acid electrolyte. While a higher Fe redox couple potential (≥ 110 mV higher) was observed in perchloric acid electrolyte, a higher ORR activity was obtained in sulfuric acid electrolyte. Here, the higher ORR activity observed in sulfuric acid than perchloric acid was correlated with the higher peak current and larger faradaic charge for the Fe redox couple. A study of the Fe redox behavior using a cavity microelectrode, eliminating the impact of ionomer, showed that the interaction of H 2 SO 4 with Fe-N-C is stronger than that of HClO 4 and that Fe redox in both electrolytes is a reversible surface electrochemical reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Stress-Activated Positive Holes on the Redox Timing in Organisms Living at the Surface of Rocks: Unlocking Nature's Secrets

Stressing and deforming igneous and/or high-grade metamorphic rocks activates electronic charge carriers known as positive holes, h•, that are defect electrons in the O2–sublattice, e.g. O-states. Like h•in semiconductors, the h•in rocks affect electrical and thermal properties. They produce electrochemical reactions, localized electrical signals, and currents. In this study, we explore the effects of positive holes on the electron flow in the electron transport chain (ETC) of organisms living at the surface of rocks such as gabbro or granite. We found that positive holes, h•, disrupt the in vivotemporal coordination governed by oscillating reduction-oxidation reactions, known as the redox cycle. Positive holes affect the timing of the redox cycle by interacting with essentialmolecules in vivo, leading to the formation of hydroxyl radicals and superoxide anions. We observed that positive holes significantly impede the growth of yeast Saccharomyces cerevisiae(i.e., colony size) and delay the sprouting of broccoli seeds. Additionally, positive holes were found to exert discernible impacts on plant development such as stem length and leaf size. Our findings highlight the intricate interplay between positive holes, redox timing, and biological processes, shedding light on the potentially significant role of positive holes in influencing the growth and development of organisms in tectonically stressed crustal environments. Understanding these effects has implications for a broader understanding of redox biology and of how environmental factors can influence cellular development in natural settings.

hypermutation↗

Microbial Community Changes across Time and Space in a Constructed Wetland

Constructed wetlands are artificial ecosystems designed to replicate natural wetland processes. Microbial communities play a pivotal role in cycling essential elements, particularly sulfur, which is crucial for trace metal fixation and remobilization in these ecosystems. By their response to their environment, microbial communities act as biological indicators of the wetland performance. To address knowledge gaps pertinent to the changes in trace metal bioavailability in relation to microbial activities in the H-02 constructed wetland, we performed this study to investigate temporal and spatial variations in microbial communities by using molecular biology tools. Quantitative polymerase chain reaction and next generation sequencing techniques were employed to analyze archaeal and bacterial groups associated with sulfur and methane cycling. Alpha diversity indices were used to assess species richness, evenness, and dominance. Results indicated high gene abundance of Desulfuromonas (5.37 × 10 6 g.cell –1 ), methane oxidizing bacteria (6.92 × 10 6 g.cell –1 ), and methanogenic microorganisms (3.02 × 10 5 g.cell –1 ) during cool months. Warm months were marked by sulfate reducing bacteria dominance (3.31 × 10 6 g.cell –1 ), potentially due to competitive interactions and environmental conditions, higher temperatures, and lower redox potential. Spatial variability among microbial groups was insignificant, but trends in gene abundance indicated complex factors influencing these groups. Next generation sequencing data demonstrated Firmicutes as the most abundant phylum with over 50% regardless of the season or sampling location. Cool months exhibited higher alpha diversity than warm months. Overall, this study showed that seasonal changes significantly impacted the microbial communities in the H-02 constructed wetland that are associated with the sulfur cycle and eventually trace metal biogeochemistry, revealing two distinct mechanisms of the sulfur cycle between the two main seasons, whereas spatial variability effects were not conclusive.

54 ENVIRONMENTAL SCIENCES↗

Why halides enhance heterogeneous metal ion charge transfer reactions

Halide-induced rate enhancements are correlated with the desorption barriers of aqueous metal–anion complexes on electrodes, which can guide electrode and electrolyte selection to enhance redox kinetics of metal ion charge transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aryl ether-free polymer electrolytes for electrochemical and energy devices

Anion exchange polymers (AEPs) play a crucial role in green hydrogen production through anion exchange membrane water electrolysis. The chemical stability of AEPs is paramount for stable system operation in electrolysers and other electrochemical devices. Given the instability of aryl ethercontaining AEPs under high pH conditions, recent research has focused on quaternized aryl ether-free variants. The primary goal of this review is to provide a greater depth of knowledge on the synthesis of aryl ether-free AEPs targeted for electrochemical devices. Synthetic pathways that yield polyaromatic AEPs include acid-catalysed polyhydroxyalkylation, metal-promoted coupling reactions, ionene synthesis via nucleophilic substitution, alkylation of polybenzimidazole, and Diels–Alder polymerization. Polyolefinic AEPs are prepared through addition polymerization, ring-opening metathesis, radiation grafting reactions, and anionic polymerization. Discussions cover structure–property–performance relationships of AEPs in fuel cells, redox flow batteries, and water and CO 2 electrolysers, along with the current status of scale-up synthesis and commercialization.

25 ENERGY STORAGE↗

Decoding the Effect of Anion Identity on the Solubility of N -(2-(2-Methoxyethoxy)ethyl)phenothiazine (MEEPT)

Variations in the solubility of redox-active organic molecules (ROM) of interest for nonaqueous redox flow batteries (RFB), especially as the ROM state-of-charge changes during charge-discharge cycling, present significant molecular design challenges. The situation is further complicated as ROM solubility can be regulated by the choice of electrolyte salt and solvent that together with the ROM comprise the catholyte or anolyte (redox electrolyte) formulation, presenting materials design challenges. The ROM N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT) is a viscous liquid at room temperature and is miscible in several organic solvents, including acetonitrile and propylene carbonate. The MEEPT radical cation (MEEPT +· ) paired with tetrafluoroborate (BF 4 - ) in acetonitrile presents a 0.5 M solubility, a dramatic decrease when compared to the viscous liquid of neutral MEEPT. Here, in this study, we present a joint experimental, regression modeling, and molecular dynamics (MD) simulations investigation to explore MEEPT-X (where X represents the counteranion) salt solubility variability as a function of concentration and counteranion chemistry in acetonitrile. We find a strong dependence of the salt solubility on the counteranion and relate these findings to explicit intermolecular interactions between MEEPT +· and the counteranion in the electrolyte solution.

Perera, Anton S. [Univ. of Kentucky, Lexington, KY↗

Activity of Metal-Fluorine States upon Delithiation of Disordered Rocksalt Oxyfluorides

The capacity of transition-metal oxides as Li-ion battery cathodes is limited by instabilities that arise when high states of charge are achieved. Oxyfluorides with a disordered rocksalt structure have emerged as attractive alternatives, but the role of F in their electrochemical function, particularly when cationic redox produces high formal oxidation states, remains to be ascertained. Here, using X-ray absorption spectroscopy, we confirm the existence of Mn-F covalent interactions in Li 2 MnO 2 F and Li 2 Mn 2/3 Nb 1/3 O 2 F. New unoccupied states evolve from hybrid 3d-2p states of both Mn-F and Mn-O bonds when the phases are delithiated, particularly in the presence of Mn(IV). The results challenge the assumption of F as anion whose covalent states with the metal are tapped at very high potentials, providing instead a nuanced picture of redox compensation in oxyfluorides. They suggest the existence of unique knobs of design of battery cathodes by manipulating the covalent interactions between transition metals and two different anions.

36 MATERIALS SCIENCE↗

Evaluating the effect of membrane-ionomer combinations and supporting electrolytes on the performance of cobalt nanoparticle anodes in anion exchange membrane electrolyzers

In low temperature polymer electrolyte membrane electrolyzers, component choices and membrane electrode assembly (MEA) fabrication have pivotal roles in determining cell performance. Here, cobalt anodes were used in combination with different ionomers, membranes, and supporting electrolytes to delineate their effect on MEA performance in anion exchange membrane (AEM) based electrolyzers. Changes to the ionomer type suppress or enhance catalyst redox and were found to alter the resulting exchange current densities and Tafel slopes. Changes in membrane conductivity account for large differences in performance and overpotential losses among the different MEAs, with higher conductivity minimizing ohmic losses. Within supporting electrolytes, lower concentration results in lower conductivity and lower MEA performance; the performance, however, is higher in potassium hydroxide than bicarbonate. These experiments address the influence of individual components and their integration on cell-level performance, to help develop a pathway to an electrolyte free system while providing a foundation for studying electrode composition and component incorporation into MEAs.

25 ENERGY STORAGE↗

Tuning Uranium Redox Chemistry in Asymmetric Polyoxometalate Complexes: Access to U(IV), U(V), and Transient U(VI)

We report the synthesis and characterization of asymmetric sandwich-type complexes [TpU IV EW 11 O 39 ] x– (E = P; x = 4, E = Si; x = 5, Tp = trispyrazolylborate). These complexes represent rare examples of the selective formation of asymmetric actinide-polyoxometalate (An-POM) complexes. Oxidation studies show that the U V analogues are stable and accessible, with both complexes isolated. Attempts to access U VI with this framework yield mixed results. Attempts to produce [TpU VI PW 11 O 39 ] 2– only led to decomposition, while electrochemical oxidation experiments gave evidence of transient formation of [TpU VI SiW 11 O 39 ] 3– in solution. Rapid decomposition of [TpU VI SiW 11 O 39 ] 3– inhibits full characterization. These studies indicate that the redox properties and stability of An-POM complexes containing actinides in higher valencies are dependent on the anionic charge of the assembly.

Actinides↗

Stable, Impermeable Hexacyanoferrate Anolyte for Nonaqueous Redox Flow Batteries

Redox-active molecules, or redoxmers, in nonaqueous redox flow batteries often suffer from membrane crossover and low electrochemical stability. Transforming inorganic polyionic redoxmers established for aqueous batteries into nonaqueous candidates is an attractive strategy to address these challenges. Here, in this study, we demonstrate such tailoring for hexacyanoferrate (HCF) by pairing the anions with tetra-n-butylammonium cation (TBA + ). TBA 3 HCF has good solubility in acetonitrile and >1 V lower redox potential vs the aqueous counterpart; thus, the familiar aqueous catholyte becomes a new nonaqueous anolyte. The lowering of redox potential correlates with replacement of water by acetonitrile in the solvation shell of HCF, which can be traced to H-bond formation between water and cyanide ligands. Symmetric flow cells indicate exceptional stability of HCF polyanions in nonaqueous electrolytes and Nafion membranes completely block HCF crossover in full cells. Ion pairing of metal complexes with organic counterions can be effective for developing promising redoxmers for nonaqueous flow batteries.

25 ENERGY STORAGE↗

Radiolytic evaluation of a new technetium redox control reagent for advanced used nuclear fuel separations

Technetium is a problematic radioisotope for used nuclear fuel (UNF) and subsequent waste management owing to its high environmental mobility and coextraction in reprocessing technologies as the pertechnetate anion (TcO 4 - ). Consequently, several strategies are under development to control the transport of this radioisotope. A proposed approach is to use diaminoguanidine (DAG) for TcO 4 - and transuranic ion redox control. Although the initial DAG molecule is ultimately consumed in the redox process, its susceptibility to radiolysis is currently unknown under envisioned UNF reprocessing conditions, which is a critical knowledge gap for evaluating its overall suitability for this role. To this end, we report the impacts of steady-state gamma irradiation on the rate of DAG radiolysis in water, aqueous 2.0 M nitric acid (HNO 3 ), and in a biphasic solvent system composed of aqueous 2.0 M HNO 3 in contact with 1.5 M N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) dissolved in n-dodecane. In addition, we report chemical kinetics for the reaction of DAG with key transients arising from electron pulse radiolysis, specifically the hydrated electron (e aq - ), hydrogen atom (H ˙ ), and hydroxyl ( ˙ OH) and nitrate (NO 3 ˙ ) radicals. The DAG molecule exhibited significant reactivity with the ˙ OH and NO 3 ˙ radicals, indicating that oxidation would be the predominant degradation pathway in radiation environments. This is consistent with its role as a reducing agent. Steady-state gamma irradiations demonstrated that DAG is readily degraded within a few hundred kilogray, the rate of which was found to increase upon going from water to HNO 3 containing solutions and solvents systems. This was attributed to a thermal reaction between DAG and the predominant HNO 3 radiolysis product, nitrous acid (HNO 2 ), k(DAG + HNO 2 ) = 5480 ± 85 M -1 s -1 . Although no evidence was found for the radiolysis of DAG altering the radiation chemistry of the contacted DEHiBA/n-dodecane phase in the investigated biphasic system, the utility of DAG as a redox control reagent will likely be limited by significant competition with its degradation by HNO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Ambipolar Electrochemistry of Pre‐Intercalated Ti 3 C 2 T x MXene in Ionic Liquid Electrolyte

Abstract Cation intercalation with or without redox remains the dominant charge storage mechanism for two‐dimensional (2D) Ti 3 C 2 T x MXene. Anion‐based charge storage remains unexplored due to intrinsic negative surface charge of MXenes preventing spontaneous intercalation of anions and irreversible oxidation of Ti at anodic potentials in aqueous electrolytes. In this work, we report on the ambipolar electrochemical behavior of the Ti 3 C 2 T x in ionic liquid electrolyte over a 2.5 V electrochemically stable window. The experiments are conducted on a thin Ti 3 C 2 T x film current collector coated with an electroactive layer of small flakes (∼150 nm) of Ti 3 C 2 T x pre‐intercalated with 1‐ethyl‐3‐methylimidazolium bis‐(trifluoromethylsulfonyl)‐imide (EMIM‐TFSI) ionic liquid. Couples of redox peaks with a very small potential separation during the voltage sweep are observed at high negative (−0.75 V vs. Ag wire) and high positive (+0.75 V vs. Ag wire) potentials. Our experimental electrochemical data combined with density functional theory (DFT) calculations suggest feasibility of pseudo‐intercalation of TFSI anions between Ti 3 C 2 T x flakes. This study provides a pathway for elucidating anion intercalation for different MXene chemistries in solvent‐free electrolytes, which can lead to development of MXene based energy storage devices with improved performance.

Electrochemistry↗

Breaking Scaling Relationships in CO 2 Electroreduction with Isoelectronic Analogs [Fe 4 N(CO) 12 ] – and [Fe 3 MnO(CO) 12 ] –

[Fe 4 N(CO) 12 ] – and [Fe 3 MnO(CO) 12 ] – have the same total electron count and overall charge, as well as similar reduction potentials of –1.21 and –1.17 V vs SCE in MeCN, respectively. Both clusters form the reduced hydride upon single electron transfer (ET) and proton transfer (PT). It is known that [Fe 4 N(CO) 12 ] – is an electrocatalyst for selective CO 2 reduction to formate at –1.2 V vs SCE in either pH 7 buffered water or in MeCN/H 2 O (95:5) and an effective electrocatalyst for H + reduction to H 2 under N 2 under the same conditions. In contrast, [Fe 3 MnO(CO) 12 ] – affords no products upon electrolysis, beyond [H-Fe 3 MnO(CO) 12 ] – . Herein, we determine that [H-Fe 3 MnO(CO) 12 ] – is a weaker hydride donor than [H-Fe 4 N(CO) 12 ] – by about 4 kcal mol –1 , and this is a breaking of the hydricity versus reduction potential scaling relationship previously established for a series of metal carbonyl clusters electrocatalysts.

14 SOLAR ENERGY↗

Contrasting Capability of Single Atom Palladium for Thermocatalytic versus Electrocatalytic Nitrate Reduction Reaction

The occurrence of high concentrations of nitrate in various water resources is a significant environmental and human health threat, demanding effective removal technologies. Single atom alloys (SAAs) have emerged as a promising bimetallic material architecture in various thermocatalytic and electrocatalytic schemes including nitrate reduction reaction (NRR). This study suggests that there exists a stark contrast between thermocatalytic (T-NRR) and electrocatalytic (E-NRR) pathways that resulted in dramatic differences in SAA performances. Among Pd/Cu nanoalloys with varying Pd–Cu ratios from 1:100 to 100:1, Pd/Cu (1:100) SAA exhibited the greatest activity (TOF Pd = 2 min –1 ) and highest N 2 selectivity (94%) for E-NRR, while the same SAA performed poorly for T-NRR as compared to other nanoalloy counterparts. DFT calculations demonstrate that the improved performance and N 2 selectivity of Pd/Cu (1:100) in E-NRR compared to T-NRR originate from the higher stability of NO 3 * in electrocatalysis and a lower N 2 formation barrier than NH due to localized pH effects and the ability to extract protons from water. Here, this study establishes the performance and mechanistic differences of SAA and nanoalloys for T-NRR versus E-NRR.

36 MATERIALS SCIENCE↗

Ga + -Chabazite Zeolite: A Highly Selective Catalyst for Nonoxidative Propane Dehydrogenation

Ga-chabazite zeolites (Ga-CHA) have been found to efficiently catalyze propane dehydrogenation with high propylene selectivity (96%). In situ FTIR spectroscopy and pulse titrations are employed to determine that upon reduction, surface Ga 2 O 3 is reduced and diffuses into the zeolite pores, displacing the Brønsted acid sites (BAS) and forming extra-framework Ga + sites. This isolated Ga + site reacts reversibly with H 2 to form GaHx (2034 cm -1 ) with an enthalpy of formation of ~ -51.2 kJ·mol -1 , a result supported by Density functional theory (DFT) calculations. The initial C 3 H 6 dehydrogenation rates decrease rapidly (40%) during the first 100 min and then decline slowly afterward, while the C 3 H 6 selectivity is stable at ~ 96%. The reduction in the reaction rate is correlated with the formation of polycyclic aromatics inside the zeolite (using UV-vis spectroscopy) indicating that the accumulation of polycyclic aromatics is the main cause of the deactivation. The carbon species formed can be easily oxidized at 600 °C with complete recovery of the PDH catalytic properties. The correlations between GaH x vs. Ga/Al ratio, and PDH rates vs. Ga/Al ratio show that extra-framework Ga + is the active center catalyzing propane dehydrogenation. The higher reaction rate on Ga + than In + in CHA zeolites, by a factor of 43, is the result of differences in the stabilization of the transition state due to the higher stability of Ga 3+ vs. In 3+ . The uniformity of the Ga + sites in this material makes it an excellent model for the molecular understanding of metal cation exchanged hydrocarbon interactions in zeolites.

10 SYNTHETIC FUELS↗

Photoelectrochemical Hydride Generation with Oxide-Coated Silicon

Photoelectrochemical generation of a potent organic hydride donor at silicon is demonstrated. Two different oxide-coated p-type silicon photoelectrodes reduced 1,2,3,5,6-pentamethyl-1H-benzo[d]imidazol-3-ium hexafluorophosphate, [PMBI][PF 6 ], to its corresponding imidazole hydride, PMBIH, in the presence of a proton source. Under 1 sun illumination, in acetonitrile with 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) buffer, the p-Si photoelectrodes convert PMBI + to PMBIH with good Faradaic efficiencies (FEs): 78% FE at −2.3 V vs Fc +/0 for Si|TiO 2 and 83% FE at −2.6 V vs Fc +/0 for Si|SiO 2 (where Si|SiO 2 represents silicon coated with an oxide layer). Generally, the Si|TiO 2 catalyzed the reaction at milder potentials than Si|SiO 2 , but the Si|SiO 2 had better selectivity for PMBIH generation over H 2 evolution than Si|TiO 2 . In light of prior studies of these photoelectrodes, the differences in selectivity and onset potential suggest a difference in mechanism, likely an outer-sphere electron transfer (ET) mechanism at the SiO 2 surface and potentially a proton-coupled ET process at the TiO 2 surface. To help understand reaction efficiency and identify areas of improvement, a thermochemical model for understanding net hydride transfer from the semiconductor to an acceptor in solution was developed. We find that the reactions in the present system are quite downhill. The high overpotentials (even while maintaining selectivity over H 2 evolution) emphasize the need for improved catalysts. Furthermore, this approach to evaluate the thermodynamics of net hydride transfer should be broadly valuable for electrochemical and photoelectrochemical processes.

14 SOLAR ENERGY↗

Polarons are probes of the dynamic nanoscale environments found in electrochemically doped π-conjugated polymers

Charge carriers (i.e., polarons) in electrochemically doped organic (semi)conductors are proposed to be regulated by several physicochemical features, including the chemical compositions and structures of the π-conjugated frameworks of the semiconductor building blocks, the chemistry of the electrolyte (considering both the salt and solvent), multiscale and time-dependent morphology variations across the material as a function of electrochemical processes, and assorted permutations of these and other factors. To address these hypotheses, we investigate the energetic, optoelectronic, chemical, and local structural properties of negative polarons (radical anions) as a function of electrochemical doping in the donor–acceptor, π-conjugated redox copolymer P(NDI2OD-T2), also referred to as N2200. A critical finding is that there is not just “one type” of polaron in electrochemically doped P(NDI2OD-T2). Rather, an ensemble of polarons exists, with the polarons having optoelectronic signatures that are defined by their nanoscale environments. Importantly, the polaron optical signatures serve as local probes for how the operando electrochemical environments are dynamically working in concert to facilitate charge transport. Collectively, the distinctive and extensive integration of theory and measurement science presented here establishes a baseline for the roles that semiconductor and electrolyte chemistries and dynamic structural features have on polarons in electrochemically doped organic semiconductors and how these factors influence the energetics and rates of polaron transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗