Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomistic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Corrosion mechanisms for metal alloy waste forms: experiment and theory Level 4 Milestone M4FT-14LA0804024 Fuel Cycle Research & Development

This document meets Level 4 Milestone: Corrosion mechanisms for metal alloy waste forms - experiment and theory. A multiphysics model is introduces that will provide the framework for the quantitative prediction of corrosion rates of metallic waste forms incorporating the fission product Tc. The model requires a knowledge of the properties of not only the metallic waste form, but also the passive oxide films that will be generated on the waste form, and the chemistry of the metal/oxide and oxide/environment interfaces. in collaboration with experimental work, the focus of this work is on obtaining these properties from fundamental atomistic models. herein we describe the overall multiphysics model, which is based on MacDonald's point-defect model for passivity. We then present the results of detailed electronic-structure calculations for the determination of the compatibility and properties of Tc when incorporated into intermetallic oxide phases. This work is relevant to the formation of multi-component oxides on metal surfaces that will incorporate Tc, and provide a kinetic barrier to corrosion (i.e. the release of Tc to the environment). Atomistic models that build upon the electronic structure calculations are then described using the modified embedded atom method to simulate metallic dissolution, and Buckingham potentials to perform classical molecular dynamics and statics simulations of the technetium (and, later, iron-technetium) oxide phases. Electrochemical methods were then applied to provide some benchmark information of the corrosion and electrochemical properties of Technetium metal. The results indicate that published information on Tc passivity is not complete and that further investigation is warranted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding Impact of Local Heterogeneities During Fast Charge

Reducing battery charging time to 10 minutes would improve the market acceptance and utility of electric vehicles. Such a fast charge rate is difficult to achieve in energy-dense thick battery electrodes, however. In particular, fast charge can drive a lithium plating side reaction that is unsafe and degrades battery capacity. The onset of the lithium plating side reaction is accelerated due to non-uniformities, or heterogeneities that exist within the negative electrode active material particles, within the coating, and at larger battery length scales as well. This presentation summarizes fiscal year 2018-2019 work by NREL, Argonne National Laboratory and Purdue University in the atomistic modeling of Li transport within graphite and continuum modeling of electrochemical heterogeneities that cause early lithium plating onset. non-uniformities, or heterogeneities that exist within the negative electrode active material particles, within the coating, and at larger battery length scales as well. This presentation summarizes fiscal year 2018-2019 work by NREL, Argonne National Laboratory and Purdue University in the atomistic modeling of Li transport within graphite and continuum modeling of electrochemical heterogeneities that cause early lithium plating onset.

30 DIRECT ENERGY CONVERSION↗

Relationship between microporous structure and light gas transport through glassy polymeric membranes revealed by molecular simulations

Microporous glassy polymers are attractive materials for gas separation membranes, due to their high permeability and tailorable selectivity, provided physical aging can be delayed. The archetypal microporous glassy polymer, PTMSP, can be blended with a hyper-crosslinked isatin–triptycene porous polymer network (PPN) to delay physical aging. However, while PPN is effective at reducing physical aging, it also affects the permeability of light gases through PTMSP. Molecular dynamics simulations were used here to shed fundamental light on the mechanisms responsible for these effects. Atomistic models are developed that satisfactorily reproduce experimental observations such as matrix density and cavity size distributions for neat PTMSP as well as for PTMSP–PPN blends. Analysis of the simulation results suggests that physical aging is delayed because the PPN inclusions slow down PTMSP relaxation while reducing the connectivity between free volume pockets. To understand how PPN inclusions affect light gas permeability, the atomistic models developed are used to probe CO 2 and CH 4 diffusion and sorption. These simulations are conducted for PTMSP matrices exhibiting varying density, towards reproducing experimental permeability data. Interrogating the simulation trajectories, it is discovered that while CH 4 travels preferentially through the free volume cavities, CO 2 preferentially interacts with the available surfaces, especially in the presence of PPN. These differences help interpret experimental observations. The transport of C 2 H 6 and H 2 S through PTMSP matrices was also investigated. These gases, and in particular H 2 S, were found to absorb within PTMSP, yielding very low diffusion coefficients. The ability to predict differences in diffusion pathways for various natural gas components unveils the possibility of engineering membranes to control permeability and selectivity towards large-scale applications.

Bao Le, Tran Thi [Univ. of Oklahoma, Norman, OK (U↗

Microstructure and magnetic properties of ultrathin FePt granular films

FePt granular films with grain size smaller than 10 nm are promising candidates for storage media used in the next generation heat-assisted magnetic recording technology. However, FePt films show degraded magnetic properties when the grain size is reduced to this scale, which cannot be explained solely by the finite size theory. In this study, we explored the structural cause of property degradation by employing advanced electron microscopy and atomistic modeling. Structural features unique to the nanostructured FePt granular films at significantly reduced grain sizes of 2~8 nm were studied by high-resolution scanning transmission electron microscopy with geometric aberrations corrected up to the third order. Two critical structural parameters, the threshold grain size corresponding to the upper size limit of the FePt grains with zero chemical ordering and the sub-nanometer thin interfacial impurity at grain boundaries, were identified. A new atomistic model was developed to correlate these structural characteristics with key magnetic properties such as Curie temperature, saturation magnetization, magnetocrystalline anisotropy, and their grain-to-grain variation. The model shows good agreement with the experimental magnetic data and explains the gap in magnetic properties between the bulk and nanostructured FePt.

36 MATERIALS SCIENCE↗

Atomistically-informed modeling of point defect clustering and evolution in irradiated ThO 2

A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO 2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the point defect diffusivities and the defect binding energies to clusters. The energies were established using detailed molecular dynamics simulations considering the statistical variability of cluster configuration. A high-order adaptive time-integration has been used to solve the model. The predicted loop density and their average size is in good agreement with reported experimental observations for proton irradiated ThO 2 at 600°C. In conclusion, the model did not predict void evolution due to the sluggish kinetics of cation vacancies, explaining the absence of voids in proton irradiated ThO 2 (and other oxides) at relatively low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale Modeling of Grain-Boundary Fracture: Cohesive Zone Models Parameterized From Atomistic Simulations

A multiscale modeling strategy is developed to study grain boundary fracture in polycrystalline aluminum. Atomistic simulation is used to model fundamental nanoscale deformation and fracture mechanisms and to develop a constitutive relationship for separation along a grain boundary interface. The nanoscale constitutive relationship is then parameterized within a cohesive zone model to represent variations in grain boundary properties. These variations arise from the presence of vacancies, intersticies, and other defects in addition to deviations in grain boundary angle from the baseline configuration considered in the molecular dynamics simulation. The parameterized cohesive zone models are then used to model grain boundaries within finite element analyses of aluminum polycrystals.

Glaessgen, Edward H.↗

Dynamics of nanoscale phase decomposition in laser ablation

Abstract Laser ablation is a process that bears both fundamental physics interest and has wide industrial applications. For decades, the lack of probes on the relevant time and length scales has prevented access to the highly nonequilibrium phase decomposition processes triggered by laser excitation. In this study, a close integration of time-resolved probing by intense femtosecond X-ray pulses with large-scale atomistic modeling has yielded unique insights into the ablation dynamics of thin gold films irradiated by femtosecond laser pulses. The emergence and growth of nanoscale density heterogeneities in the expanding ablation plume, predicted in the simulations, are mapped to the rapid evolution of distinct small angle diffraction features. This mapping enables identification of the characteristic signatures of different phase decomposition processes occurring simultaneously in the plume, which are driven by photomechanical and thermodynamic driving forces. Beyond the specific insights into the ablation phenomenon, this study demonstrates the power of joint X-ray probing and atomistic modeling of material dynamics under extreme conditions of thermal and mechanical nonequilibrium.

Sun, Yanwen (ORCID:0000000159266565)↗

Fusion Blanket and Fuel Cycle Research at PNNL: FY22 Year-end Report

During the reporting period, research at PNNL focused on two tasks within the DOE Fusion Blanket and Fuel Cycle Program. Research on Task 1, Tritium Extraction from Pb-Li and He Using a Vacuum Permeator, focused on atomistic modeling to better understand tritium transport in Pd-coated V vacuum permeators. As a lower cost alternative to Pd permeators, thin coatings of Pd (or other noble metals) can be deposited over a substrate like V. However, the permeation performance of composite metal membranes degrades over time, due to the formation of intermetallics at the coating-substrate interface. Computational studies were performed to better understand tritium transport through these Pd-V intermetallics. The results of the FY22 Pd-V modeling study were recently submitted for publication in Computational Materials Science and presented at the Technology of Fusion Energy conference. Future work in this area will focus on interdiffusion barriers to prevent intermetallic formation that is deleterious to tritium transport. There are opportunities for collaboration with researchers at the Colorado School of Mines, who are manufacturing and testing candidate interdiffusion barriers. Research on Task 3, Solid Breeder Materials, included ion irradiation and post-irradiation characterization of lithium orthosilicate (Li 4 SiO 4 ) and lithium metasilicate (Li 2 SiO 3 ) to improve fundamental understanding of irradiation effects, in combination with atomistic modeling focused on the energetics of He clustering in these two ceramic phases. The results of the study suggested that the Li 4 SiO 4 phase, which is more desirable as a solid breeder due to its higher Li density, was amorphized during ion irradiation while the Li 2 SiO 3 phase appeared to be more resistant to irradiation damage. It is possible that Li loss contributed to the poor irradiation performance of the Li 4 SiO 4 , and some thoughts are provided regarding coatings that could be applied to solid breeders like this to prevent Li loss at elevated temperature while not hindering tritium diffusion. The results of the FY22 ion irradiation study were recently submitted for publication in Journal of Nuclear Materials and presented at the 22nd International Conference on Ion Beam Modification of Materials. Future work in this area will focus on Li-rich ceramics such as Li 5 AlO 4 and Li 8 ZrO 6 that have high Li density and should provide rapid tritium release based on previous work with less Li-rich ceramics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nucleation and growth of cobalt disilicide precipitates during in situ transmission electron microscopy implantation

The paper is aimed at getting deeper insight into the fundamental mechanisms that govern CoSi{sub 2} precipitate nucleation and growth during Co ion implantation at high temperatures (500-650 deg. C). Information about nucleation and growth of metal silicides as a function of temperature and implantation flux is provided by experiments on cobalt implantation in silicon, performed directly by in situ transmission electron microscopy. The main attention is paid to the nucleation of B-type precipitates, which dominate under ion implantation conditions. The obtained quantitative behavior of precipitate number density and size and the scaling of these values with implantation flux are discussed and rationalized in terms of analytical and simulation approaches. An atomistic model of B-type precipitate nucleation based on the first-principles calculations of relative energetic efficiency of different Co clusters is proposed.

36 MATERIALS SCIENCE↗

Experimental Demonstration of Advanced Palladium Membrane Separators for Central High Purity Hydrogen Production

The overall objectives for this project were to: (1) confirm the high stability and resistance of a PdCu trimetallic alloy to carbon and carbide formation and, in addition, resistance to sulfur, halides, and ammonia; (2) develop a sulfur, halide, and ammonia resistant alloy membrane with a projected hydrogen permeance of 25 m{sup 3}m{sup -2}atm{sup -0.5}h{sup -1} at 400 C and capable of operating at pressures of 12.1 MPa ({approx}120 atm, 1750 psia); and (3) construct and experimentally validate the performance of 0.1 kg/day H{sup 2} PdCu trimetallic alloy membrane separators at feed pressures of 2 MPa (290 psia) in the presence of H{sub 2}S, NH{sub 3}, and HCl. This project successfully increased the technology readiness level of palladium-based metallic membranes for hydrogen separation from coal-biomass gasifier exhaust or similar hydrogen-containing gas streams. The reversible tolerance of palladium-copper (PdCu) alloys was demonstrated for H{sub 2}S concentrations varying from 20 ppmv up to 487 ppmv and NH{sub 3} concentrations up to 9 ppmv. In addition, atomistic modeling validated the resistance of PdCu alloys to carbon formation, irreversible sulfur corrosion, and chlorine attack. The experimental program highlighted two key issues which must be addressed as part of future experimental programs: (1) tube defects and (2) non-membrane materials of construction. Four out of five FCC PdCu separators developed leaks during the course of the experimental program because {approx}10% of the alloy tubes contained a single defect that resulted in a thin, weak point in the tube walls. These defects limited operation of the existing tubes to less than 220 psig. For commercial applications of a PdCu alloy hydrogen separator under high sulfur concentrations, it was determined that stainless steel 316 is not suitable for housing or supporting the device. Testing with sulfur concentrations of 487 {+-} 4 ppmv resulted in severe corrosion of the stainless steel components of the separators. The project identified an experimental methodology for quantifying the impact of gas contaminants on PdCu alloy membrane performance as well as an atomistic modeling approach to screen metal alloys for their resistance to irreversible sulfur corrosion. Initial mathematical descriptions of the effect of species such as CO and H{sub 2}S were developed, but require further experimental work to refine. At the end of the project, an improvement to the experimental approach for acquiring the necessary data for the permeability model was demonstrated in preliminary tests on an enhanced PdCu separator. All of the key DOE 2010 technical targets were met or exceeded except for the hydrogen flux. The highest flux observed for the project, 125 ft{sup 3}ft{sup -2}h{sup -1}, was obtained on a single tube separator with the aforementioned enhanced PdCu separator with a hydrogen feed pressure of 185 psig at 500 C.

08 HYDROGEN↗

Pressure Induced Phase Transformations in Ceramics

The study of materials with unusual properties offers new insight into structure-property relations as well as promise for the design of novel composites. In this spirit, the PIs seek to (1) understand fundamental mechanical phenomena in ceramics that exhibit pressure-induced phase transitions, negative coefficient of thermal expansion (CTE), and negative compressibility, and (2) explore the effect of these phenomena on the mechanical behavior of composites designed with such ceramics. The broad and long-term goal is to learn how to utilize these unusual behaviors to obtain desired mechanical responses. While the results are expected to be widely applicable to many ceramics, most of the present focus is on silicates, as they exhibit remarkable diversity in structure and properties. Eucryptite, a lithium aluminum silicate (LiAlSiO 4 ), is specifically targeted because it exhibits a pressure-induced phase transition at a sufficiently low pressure to be accessible during conventional materials processing. Thus, composites with eucryptite may be designed to exhibit a novel type of transformation toughening. The PIs have performed a combination of activities that encompass synthesis and processing to control structures, atomistic modeling to predict and understand structures, and characterization to study mechanical behavior. Several materials behavior discoveries were made. It was discovered that small amounts of Zn (as small as 0.1 percent by mol) reverse the sign of the coefficient of thermal expansion of beta-eucryptite from negative to slightly positive. The presence of Zn also significantly mitigates microcracking that occurs during thermal cycling of eucryptite. It is hypothesized that Zn disrupts the Li ordering in beta-eucryptite, thereby altering the thermal expansion behavior. A nanoindentation technique developed to characterize incipient plasticity was applied to examine the initial stages of the pressure induced phase transformation from beta to epsilon-eucryptite and show that the transformation nucleation is related to the motion of the tetrahedral units making up the structure. It was revealed that the conduction of Li ions through the structure is also dictated by the tetrahedral unit arrangement and how their positions change with temperature. The critical pressure to obtain the high pressure phase of eucryptite was shown to depend on the grain size. The structure of the high pressure phase was determined with a combination of atomistic modeling and in situ x-ray diffraction experiments.

36 MATERIALS SCIENCE↗

Characteristic orientation relationships in nanoscale Al-Al2Cu Eutectic

Highlights: • Nano-scale lamellar Al-Al{sub 2}Cu eutectic was synthesized by laser surface remelting. • Orientation relationship (OR) is {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al.} • The OR has two variants, I has (001){sub Al2Cu}||{001}{sub Al} and II has (001){sub Al2Cu}||{111}{sub Al.} • Variant I is associated with low energy interfaces. - Abstract: A fully lamellar Al-Al{sub 2}Cu eutectic comprising alternate nano-scale α-Al and θ-Al{sub 2}Cu phases was synthesized through laser surface remelting of a cast Al-32.7 wt% Cu alloy. The orientation relationship between α-Al and θ-Al{sub 2}Cu phases was investigated from Kikuchi patterns obtained using electron backscattered diffraction (EBSD) and t-EBSD techniques. The characteristic orientation relationship (OR), {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al}, was observed independent of interlamellar spacing. This OR has two variants where, besides the two parallel planes, the variant I exhibits (001){sub Al2Cu}||{001}{sub Al} and the variant II exhibits (001){sub Al2Cu}||{111}{sub Al}. Variant I prevails over variant II in laser-processed α-Al and θ-Al{sub 2}Cu nano-laminates, and atomistic modeling indicates that this is due to the low energy interfaces associated with variant I, i.e., {211}{sub Al2Cu}||{111}{sub Al} or (001){sub Al2Cu}||{001}{sub Al}. A comprehensive understanding of the crystallographic orientation relationships between two phases may help predict or explain the active slip systems in fine-scale Al-Al{sub 2}Cu eutectic and other cubic-tetragonal two-phase materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determining Atomistic SAXS Models of Tri-Ubiquitin Chains from Bayesian Analysis of Accelerated Molecular Dynamics Simulations

Small-angle X-ray scattering (SAXS) has become an increasingly popular technique for characterizing the solution ensemble of flexible biomolecules. However, data resulting from SAXS is typically low-dimensional and is therefore difficult to interpret without additional structural knowledge. In theory, molecular dynamics (MD) trajectories can provide this information, but conventional simulations rarely sample the complete ensemble. Here, we demonstrate that accelerated MD simulations can be used to produce higher quality models in shorter time scales than standard simulations, and we present an iterative Bayesian Monte Carlo method that is able to identify multistate ensembles without overfitting. This methodology is applied to several ubiquitin trimers to demonstrate the effect of linkage type on the solution states of the signaling protein. Here, we observe that the linkage site directly affects the solution flexibility of the trimer and theorize that this difference in plasticity contributes to their disparate roles in vivo.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Local Electronic Structure of Supercritical CO 2 from X-ray Raman Spectroscopy and Atomistic-Scale Modeling

Supercritical CO 2 is encountered in several technical and natural systems related to biology, geophysics, and engineering. While the structure of gaseous CO 2 has been studied extensively, the properties of supercritical CO 2 , particularly close to the critical point, are not well-known. Here, in this work, we combine X-ray Raman spectroscopy, molecular dynamics simulations, and first-principles density functional theory (DFT) calculations to characterize the local electronic structure of supercritical CO 2 at conditions around the critical point. The X-ray Raman oxygen K-edge spectra manifest systematic trends associated with the phase change of CO 2 and the intermolecular distance. Extensive first-principles DFT calculations rationalize these observations on the basis of the 4sσ Rydberg state hybridization. X-ray Raman spectroscopy is found to be a sensitive tool for characterizing electronic properties of CO 2 under challenging experimental conditions and is demonstrated to be a unique probe for studying the electronic structure of supercritical fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗