Search NASA⌕ Search

SEARCH · Search NASA

Results for “aviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

An Examination of Commercial Aviation Accidents and Incidents Related to Integrated Vehicle Health Management

The Integrated Vehicle Health Management (IVHM) Project is one of the four projects within the National Aeronautics and Space Administration's (NASA) Aviation Safety Program (AvSafe). The IVHM Project conducts research to develop validated tools and technologies for automated detection, diagnosis, and prognosis that enable mitigation of adverse events during flight. Adverse events include those that arise from system, subsystem, or component failure, faults, and malfunctions due to damage, degradation, or environmental hazards that occur during flight. Determining the causal factors and adverse events related to IVHM technologies will help in the formulation of research requirements and establish a list of example adverse conditions against which IVHM technologies can be evaluated. This paper documents the results of an examination of the most recent statistical/prognostic accident and incident data that is available from the Aviation Safety Information Analysis and Sharing (ASIAS) System to determine the causal factors of system/component failures and/or malfunctions in U.S. commercial aviation accidents and incidents.

Reveley, Mary S.↗
NASA NTRS2012

The Future of Green Aviation

Dr. Edwards'presentation provides an overview of aviation's economic impact in the U.S. including aviation's impact on environment and energy. The presentation discusses NASA's contributions to the advancement of commercial aircraft design highlighting the technology drivers and recent technology advancements for addressing community noise, energy efficiency and emissions. The presentation concludes with a preview of some of NASA's integrated systems solutions, such as novel aircraft concepts and advancements in propulsion that will enable the future of more environmentally compatible aviation.

Edwards, Thomas↗
NASA NTRS2012

NASA Environmentally Responsible Aviation High Overall Pressure Ratio Compressor Research Pre-Test CFD

This paper describes a collaborative and cost-shared approach to reducing fuel burn under the NASA Environmentally Responsible Aviation project. NASA and General Electric (GE) Aviation are working together aa an integrated team to obtain compressor aerodynamic data that is mutually beneficial to both NASA and GE Aviation. The objective of the High OPR Compressor Task is to test a single stage then two stages of an advanced GE core compressor using state-of-the-art research instrumentation to investigate the loss mechanisms and interaction effects of embedded transonic highly-loaded compressor stages. This paper presents preliminary results from NASA's in-house multistage computational code, APNASA, in preparation for this advanced transonic compressor rig test.

Celestina, Mark L.↗
NASA NTRS2012

The National Aviation Operational Monitoring Service (NAOMS): A Documentation of the Development of a Survey Methodology

The National Aviation Operational Monitoring Service (NAOMS) was a research project under NASA s Aviation Safety Program during the years from 2000 to 2005. The purpose of this project was to develop a methodology for gaining reliable information on changes over time in the rates-of-occurrence of safety-related events as a means of assessing the safety of the national airspace. The approach was a scientifically designed survey of the operators of the aviation system concerning their safety-related experiences. This report presents the results of the methodology developed and a demonstration of the NAOMS concept through a survey of nearly 20,000 randomly selected air-carrier pilots. Results give evidence that the NAOMS methodology can provide a statistically sound basis for evaluating trends of incidents that could compromise safety. The approach and results are summarized in the report and supporting documentation and complete analyses of results are presented in 14 appendices.

Connors, Mary M.↗
NASA NTRS2014

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the Atmospheric Environment Safety Technology Project

This study analyzed aircraft incidents in the NASA Aviation Safety Reporting System (ASRS) that apply to two of the three technical challenges (TCs) in NASA's Aviation Safety Program's Atmospheric Environment Safety Technology Project. The aircraft incidents are related to airframe icing and atmospheric hazards TCs. The study reviewed incidents that listed their primary problem as weather or environment-nonweather between 1994 and 2011 for aircraft defined by Federal Aviation Regulations (FAR) Parts 121, 135, and 91. The study investigated the phases of flight, a variety of anomalies, flight conditions, and incidents by FAR part, along with other categories. The first part of the analysis focused on airframe-icing-related incidents and found 275 incidents out of 3526 weather-related incidents over the 18-yr period. The second portion of the study focused on atmospheric hazards and found 4647 incidents over the same time period. Atmospheric hazards-related incidents included a range of conditions from clear air turbulence and wake vortex, to controlled flight toward terrain, ground encounters, and incursions.

Withrow, Colleen A.↗
NASA NTRS2014

Frequency of Specific Categories of Aviation Accidents and Incidents During 2001-2010

The purpose of this study was to determine the types of accidents or incidents that are most important to the aviation safety risk. All accidents and incidents from 2001-2010 were assigned occurrence categories based on the taxonomy developed by the Commercial Aviation Safety Team/International Civil Aviation Organization (CAST/ICAO) Common Taxonomy Team (CICTT). The most frequently recorded categories were selected within each of five metrics: total accidents, fatal accidents, total injuries, fatal injuries and total incidents. This analysis was done separately for events within Part 121, Scheduled Part 135, Non-Scheduled Part 135 and Part 91. Combining those five sets of categories resulted in groups of between seven and eleven occurrence categories, depending on the flight operation. These groups represent 65-85% of all accidents and 68-81% of incidents.

Evans, Joni K.↗
NASA NTRS2014

A Framework for Assessment of Aviation Safety Technology Portfolios

The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

Jones, Sharon M.↗
NASA NTRS2015

Transition, Training, and Assessment of Multispectral Composite Imagery in Support of the NWS Aviation Forecast Mission

The NASA/Short‐term Prediction, Research, and Transition (SPoRT) Program works closely with NOAA/NWS weather forecasters to transition unique satellite data and capabilities into operations in order to assist with nowcasting and short‐term forecasting issues. Several multispectral composite imagery (i.e. RGB) products were introduced to users in the early 2000s to support hydrometeorology and aviation challenges as well as incident support. These activities lead to SPoRT collaboration with the GOES‐R Proving Ground efforts where instruments such as MODIS (Aqua, Terra) and S‐NPP/VIIRS imagers began to be used as near‐realtime proxies to future capabilities of the Advanced Baseline Imager (ABI). One of the composite imagery products introduced to users was the Night‐time Microphysics RGB, originally developed by EUMETSAT. SPoRT worked to transition this imagery to NWS users, provide region‐specific training, and assess the impact of the imagery to aviation forecast needs. This presentation discusses the method used to interact with users to address specific aviation forecast challenges, including training activities undertaken to prepare for a product assessment. Users who assessed the multispectral imagery ranged from southern U.S. inland and coastal NWS weather forecast offices (WFOs), to those in the Rocky Mountain Front Range region and West Coast, as well as highlatitude forecasters of Alaska. These user‐based assessments were documented and shared with the satellite community to support product developers and the broad users of new generation satellite data.

Fuell, Kevin↗
NASA NTRS2014

Aviation Safety Risk Modeling: Lessons Learned From Multiple Knowledge Elicitation Sessions

Aviation safety risk modeling has elements of both art and science. In a complex domain, such as the National Airspace System (NAS), it is essential that knowledge elicitation (KE) sessions with domain experts be performed to facilitate the making of plausible inferences about the possible impacts of future technologies and procedures. This study discusses lessons learned throughout the multiple KE sessions held with domain experts to construct probabilistic safety risk models for a Loss of Control Accident Framework (LOCAF), FLightdeck Automation Problems (FLAP), and Runway Incursion (RI) mishap scenarios. The intent of these safety risk models is to support a portfolio analysis of NASA's Aviation Safety Program (AvSP). These models use the flexible, probabilistic approach of Bayesian Belief Networks (BBNs) and influence diagrams to model the complex interactions of aviation system risk factors. Each KE session had a different set of experts with diverse expertise, such as pilot, air traffic controller, certification, and/or human factors knowledge that was elicited to construct a composite, systems-level risk model. There were numerous "lessons learned" from these KE sessions that deal with behavioral aggregation, conditional probability modeling, object-oriented construction, interpretation of the safety risk results, and model verification/validation that are presented in this paper.

Luxhoj, J. T.↗
NASA NTRS2016

Psychophysiological Sensing and State Classification for Attention Management in Commercial Aviation

Attention-related human performance limiting states (AHPLS) can cause pilots to lose airplane state awareness (ASA), and their detection is important to improving commercial aviation safety. The Commercial Aviation Safety Team found that the majority of recent international commercial aviation accidents attributable to loss of control inflight involved flight crew loss of airplane state awareness, and that distraction of various forms was involved in all of them. Research on AHPLS, including channelized attention, diverted attention, startle / surprise, and confirmation bias, has been recommended in a Safety Enhancement (SE) entitled "Training for Attention Management." To accomplish the detection of such cognitive and psychophysiological states, a broad suite of sensors has been implemented to simultaneously measure their physiological markers during high fidelity flight simulation human subject studies. Pilot participants were asked to perform benchmark tasks and experimental flight scenarios designed to induce AHPLS. Pattern classification was employed to distinguish the AHPLS induced by the benchmark tasks. Unimodal classification using pre-processed electroencephalography (EEG) signals as input features to extreme gradient boosting, random forest and deep neural network multiclass classifiers was implemented. Multi-modal classification using galvanic skin response (GSR) in addition to the same EEG signals and using the same types of classifiers produced increased accuracy with respect to the unimodal case (90 percent vs. 86 percent), although only via the deep neural network classifier. These initial results are a first step toward the goal of demonstrating simultaneous real time classification of multiple states using multiple sensing modalities in high-fidelity flight simulators. This detection is intended to support and inform training methods under development to mitigate the loss of ASA and thus reduce accidents and incidents.

Harrivel, Angela R.↗
NASA NTRS2016

Design, Development, and Testing of a UAV Hardware-in-the-Loop Testbed for Aviation and Airspace Prognostics Research

The airspace is becoming more and more complicated, and will continue to do so in the future with the integration of Unmanned Aerial Vehicles (UAVs), autonomy, spacecraft, other forms of aviation technology into the airspace. The new technology and complexity increases the importance and difficulty of safety assurance. Additionally, testing new technologies on complex aviation systems & systems of systems can be very difficult, expensive, and sometimes unsafe in real life scenarios. Prognostic methodology provides an estimate of the health and risks of a component, vehicle, or airspace and knowledge of how that will change over time. That measure is especially useful in safety determination, mission planning, and maintenance scheduling. The developed testbed will be used to validate prediction algorithms for the real-time safety monitoring of the National Airspace System (NAS) and the prediction of unsafe events. The framework injects flight related anomalies related to ground systems, routing, airport congestion, etc. to test and verify algorithms for NAS safety. In our research work, we develop a live, distributed, hardware-in-the-loop testbed for aviation and airspace prognostics along with exploring further research possibilities to verify and validate future algorithms for NAS safety. The testbed integrates virtual aircraft using the X-Plane simulator and X-PlaneConnect toolbox, UAVs using onboard sensors and cellular communications, and hardware in the loop components. In addition, the testbed includes an additional research framework to support and simplify future research activities. It enables safe, accurate, and inexpensive experimentation and research into airspace and vehicle prognosis that would not have been possible otherwise. This paper describes the design, development, and testing of this system. Software reliability, safety and latency are some of the critical design considerations in development of the testbed. Integration of HITL elements in the development phases and veri cation/ validation are key elements to this report.

HITL↗
NASA NTRS2017

NOx Emissions Characteristics and Correlation Equations of Two P and W's Axially Staged Sector Combustors Developed Under NASA Environmentally Responsible Aviation (ERA) Project

Two P&W (Pratt & Whitney)'s axially staged sector combustors have been developed under NASA's Environmentally Responsible Aviation (ERA) project. One combustor was developed under ERA Phase I, and the other was developed under ERA Phase II. Nitrogen oxides (NOx) emissions characteristics and correlation equations for these two sector combustors are reported in this article. The Phase I design was to optimize the NOx emissions reduction potential, while the Phase II design was more practical and robust. Multiple injection points and fuel staging strategies are used in the combustor design. Pilot-stage injectors are located on the front dome plate of the combustor, and main-stage injectors are positioned on the top and bottom (Phase I) or on the top only (Phase II) of the combustor liners downstream. Low power configuration uses only pilot-stage injectors. Main-stage injectors are added to high power configuration to help distribute fuel more evenly and achieve lean burn throughout the combustor yielding very low NOx emissions. The ICAO (International Civil Aviation Organization) landing-takeoff NOx emissions are verified to be 88 percent (Phase I) and 76 percent (Phase II) under the ICAO CAEP/6 (Committee on Aviation Environmental Protection 6th Meeting) standard, exceeding the ERA project goal of 75 percent reduction, and the combustors proved to have stable combustion with room to maneuver on fuel flow splits for operability.

sector combustor test↗
NASA NTRS2017

Advanced Software V&V for Civil Aviation and Autonomy

With the advances in high-computing platform (e.g., advanced graphical processing units or multi-core processors), computationally-intensive software techniques such as the ones used in artificial intelligence or formal methods have provided us with an opportunity to further increase safety in the aviation industry. Some of these techniques have facilitated building safety at design time, like in aircraft engines or software verification and validation, and others can introduce safety benefits during operations as long as we adapt our processes. In this talk, I will present how NASA is taking advantage of these new software techniques to build in safety at design time through advanced software verification and validation, which can be applied earlier and earlier in the design life cycle and thus help also reduce the cost of aviation assurance. I will then show how run-time techniques (such as runtime assurance or data analytics) offer us a chance to catch even more complex problems, even in the face of changing and unpredictable environments. These new techniques will be extremely useful as our aviation systems become more complex and more autonomous.

software assurance↗
NASA NTRS2020

Green Light for Green Flight: NASA's Contributions to Environmentally Friendly Aviation

Although the shape and speed of commercial airliners have not changed significantly since the late-1950s, many aspects of performance such as range and fuel efficiency, and environmental impacts including noise and emissions have improved tremendously. By the beginning of the 21st century, however, it became clear that more work was necessary. Heightened sensitivity to, and understanding of, the impact of aviation on the environment and the reduced availability of low-cost energy placed the spotlight directly on aircraft efficiency and reducing environmental impacts. This realization spawned one of NASA's most ambitious aviation projects to date - the Environmentally Responsible Aviation project.

Peter W. Merlin↗
NASA NTRS2021

Development of an Additive Manufacturing Ecosystem for Qualification of Additive Manufacturing Processes and Materials in Aviation

The major challenges associated with additive manufacturing (AM) are an ability to qualify parts and the costs associated with the technology. Our team will study and mature technologies as detailed below to develop an ecosystem for the qualification of AM machines, which in turn supports the certification of part production. Additive manufacturing offers unique opportunities for the aviation industry in the fabrication of original components and replacement parts. Aggressive use of metals AM has, for example, allowed the rapid development and production of new launch vehicle designs, at substantially reduced costs. Aviation has unique challenges, such as higher production volumes, but the potential value of integrating AM into aviation manufacturing is clear. To implement the ecosystem for AM qualification, the team will run a set of six multi-disciplinary projects. Each of these projects will address a current barrier to AM process qualification, and efficient production.

Koushik Datta↗
NASA NTRSDate not supplied

Reports of Resilient Performance: Investigating Operators' Descriptions of Safety-producing Behaviors in the Aviation Safety Reporting System

While many existing taxonomies and frameworks provide a common vocabulary for describing how human operators fail in the context of sociotechnical systems, at present, there is no common vocabulary to describe how humans succeed. Such a framework would facilitate systematically collecting and analyzing data on how human performance can produce safety, not just how it can reduce safety. One potentially rich source of currently available information for exploring desired performance is the reports submitted to NASA’s Aviation Safety Reporting System (ASRS). These de-identified, confidential, and voluntary narrative reports are submitted by pilots, controllers, ground operators, and others within aviation operations. While these reports are primarily submitted to describe safety risks, incidents, and problems, they also often describe how those risks were mitigated, and provide a window into aspects of everyday work in aviation. These reports can be searched in a variety of ways. This paper describes methods for systematically examining ASRS narratives to understand how operators talk about their own resilient behaviors during adverse safety conditions and events. Guided by Erik Hollnagel’s Resilience Assessment Grid framework (i.e., anticipate, monitor, respond, learn), various approaches and tools for such inquiries are described. The approach, process, challenges, and suggestions to building an operator-based description of resilient performance are discussed, and tools to facilitate data analysis to maximize learning from these reports are described.

ASRS narratives↗
NASA NTRSDate not supplied

Defining Services, Functions, and Capabilities for an Advanced Air Mobility (AAM) In-time Aviation Safety Management System (IASMS)

NASA’s vision for Advanced Air Mobility (AAM) Mission is to help emerging aviation markets to safely develop an air transportation system that moves people and cargo between places previously not served or underserved by aviation. The integration of new operational paradigms and vehicle classes in this system requires a transformation of the National Airspace System (NAS) that includes substantive changes critical for assuring safety. These changes are compelled by unique challenges posed by AAM to the safety management system (SMS). These challenges were assessed by committees of the National Academies in their reports on a vision for an In-time Aviation Safety Management System (IASMS) and a blueprint for AAM [1,2]. In their description of an IASMS, the top recommendation was development of a concept of operations (ConOps) for IASMS. This paper describes the high-priority recommendations from the National Academies for its IASMS vision and how they are addressed through a distributed system-of-systems architecture. The IASMS architecture is structured on the services, functions, and capabilities (SFCs) necessary for In-time System-wide Safety Assurance (ISSA)initially developed for urban air mobility (UAM). The paper then posits where these SFCs would reside across vehicles, airspace, or service suppliers such as Supplemental Data Service Providers (SDSPs), and how SFCs scale with increasing complexity in design and operations of AAM. SFCs are foundational building blocks for a system that targets an individual or family of risks using a Monitor-Assess-Mitigate risk paradigm for anomalies, precursors and trends. An IASMS could be conceived that uses a portfolio of SFCs for AAM in general or prioritizes SFCs for a specific domain or operation.

K Ellis↗
NASA NTRS2022

Sky for All: Ushering in a New Era of Aviation

Today’s aviation system will be unable to keep pace with increasing market demand for new operations that capitalize on advancements in autonomy and other emerging technologies. Paradigm shifts are necessary to maintain U.S. leadership in the global aviation market, enhance the sustainability of operations, increase mobility, and provide publicly beneficial services. The Sky for All Vision provides an R&D framework that will support national strategic planning for a holistic airspace ecosystem to usher in a new era of aviation. NASA is in a unique position to tackle the most difficult R&D challenges and to convene the aerospace community towards a common vision.

Jeanne Yu↗