Search NASA⌕ Search

SEARCH · Search NASA

Results for “best source selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Determining velocity of detonation using high-resolution time domain reflectometry

Two methods are presented to make measurements of the length of a coaxial cable with submillimeter and submicrosecond accuracy. If the cable is destroyed by the passage of a strong shock, for instance, from the detonation of an explosive, a measure of the phase velocity of the detonation (VOD) can be obtained with high accuracy (≈0.25%). The first method introduces a series of short Gaussian electrical pulses (<300 ps) into the cable that reflect off the cable end and are compared to the time of the original outgoing pulse by using a fast digitizer (100 gigasamples per second). By curve fitting a Gaussian form to the outgoing and reflected pulses, a measurement of the cable length can be made with subsample accuracy. So, as long as the pulses do not overlap, a large number may be present in the cable at any time allowing pulse repetition rates of 40–135 MHz depending on the cable length. Averaging allows accurate VOD measurements to be made that are comparable with the best traditional techniques. The second method replaces the pulser with a wide-spectrum (0.1–10 GHz) amplified random noise source. A similar setup and digitizer are used before autocorrelating short (80–160 ns) subsamples of the total waveform to measure the reflected delay time. That is, a smaller amplitude version of the original waveform appears time shifted by twice the transit time in the cable and this time is estimated via autocorrelation. The advantage of this method is that a new subsample needs only to be selected from a time increment in which new spectral information is present for a new measure of the length to be made. In this manner, many more length estimates can be averaged to establish the VOD than with the Gaussian approach. As a result, a detailed description of the implementation of both methods is presented together with an example of the type of data collected and limitations found.

47 OTHER INSTRUMENTATION↗

Sourcing thermotolerant poly(ethylene terephthalate) hydrolase scaffolds from natural diversity

Enzymatic deconstruction of poly(ethylene terephthalate) (PET) is under intense investigation, given the ability of hydrolase enzymes to depolymerize PET to its constituent monomers near the polymer glass transition temperature. To date, reported PET hydrolases have been sourced from a relatively narrow sequence space. Here, we identify additional PET-active biocatalysts from natural diversity by using bioinformatics and machine learning to mine 74 putative thermotolerant PET hydrolases. We successfully express, purify, and assay 51 enzymes from seven distinct phylogenetic groups; observing PET hydrolysis activity on amorphous PET film from 37 enzymes in reactions spanning pH from 4.5–9.0 and temperatures from 30–70 °C. We conduct PET hydrolysis time-course reactions with the best-performing enzymes, where we observe differences in substrate selectivity as function of PET morphology. We employed X-ray crystallography and AlphaFold to examine the enzyme architectures of all 74 candidates, revealing protein folds and accessory domains not previously associated with PET deconstruction. Overall, this study expands the number and diversity of thermotolerant scaffolds for enzymatic PET deconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods for Microgrid Protection (Literature Review)

This work reviews existing conventional and non-conventional protection schemes for grid- and islanded-connected mode operations in North American microgrid projects. The protection schemes applied for the microgrid projects had different types of distributed energy resources (DERs), and integrated the hydropower/diesel generators, gas/steam/wind turbines and photovoltaic (PV) systems with energy storages. In this work, conventional protection schemes were those defined within the IEEE Standard C37.2-2008, while non-conventional schemes were those not defined within this Standard. The pros and cons of conventional and non-conventional protection schemes applied in microgrid projects were discussed in detail. The overvoltage, undervoltage and frequency elements were the most common conventional protection schemes applied in microgrid projects in North America. These protection elements were used to detect the islanded conditions and faults that could not be sensed by overcurrent relays because the small fault currents contributed by the low-inertia DERs and power-electronic sources. The directional overcurrent elements allowed to distinguish between external (grid) and internal (microgrid) faults. The adaptive protection was the most popular non-conventional protection scheme applied in microgrid projects. The adaptive protection detected if the microgrid was set in grid- or islanding-connected modes and selected the relay settings for the actual microgrid conditions to avoid relays’ misoperations. In conclusion, each microgrid project can confront different types of DERs and operation modes that require individual studies to solve their protection and control challenges, to obtain the best technical and economical solution. The protection scheme results and discussions for North American microgrid projects collected in this report provides an important information to guide protection and control engineers, designers and researchers in defining the protection methods for microgrids based on the types of DERs and grid- or islanded-connected operational modes

24 POWER TRANSMISSION AND DISTRIBUTION↗

Active-to-Passive Environmental Cleanup Transition Strategies - 13220

The Savannah River Site uses a graded approach to environmental cleanup. The selection of groundwater and vadose zone remediation technologies for a specific contamination area is based on the size, contaminant type, contaminant concentration, and configuration of the plume. These attributes are the result of the nature and mass of the source of contamination and the subsurface characteristics in the area of the plume. Many large plumes consist of several zones that are most efficiently addressed with separate complementary corrective action/remedial technologies. The highest concentrations of contaminants are found in the source zone. The most robust, high mass removal technologies are often best suited for remediation of the source zone. In the primary plume zone, active remedies, such as pump-and-treat, may be necessary to remove contaminants and exert hydraulic control of the plume. In the dilute fringe zone, contaminants are generally lower in concentration and can often be treated with passive techniques. A key determination in achieving an acceptable and cost-effective end state for a given waste unit is when to transition from an active treatment system to a more passive or natural approach (e.g., monitored natural attenuation or enhanced attenuation). This paper will discuss the considerations for such a transition as well as provide examples of successful transitions at the Savannah River Site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparing X-ray Color Selection in Separating X-ray Binary Classes using Color-Color-Intensity Diagrams

X-ray binaries exhibit a wide range of properties but there are few accepted methods to determine the nature of the compact object. Color-Color-Intensity diagrams have been suggested as a means of distinguishing between systems containing black holes from those containing neutron stars. However, this technique has been verified with data from only one instrument (RXTE/ASM) with a single set of X-ray colors defined using data available only in pre-determined energy bands. We test a selection of X-ray colors with a more sensitive instrument to determine the reliability of this method. We use data from the MAXI/Gas Slit Camera, which allows users to specify energy-bands. We test X-ray colors that have been previously defined in the literature as well as ones that we define specifically in this paper. A representative set of systems are used to construct Color-Color-Intensity diagrams in each set of colors to determine which are best for separating different classes. For studying individual sources certain bands are more effective than others. For a specified energy range, the separation of soft states in black hole binaries was possible only where both soft and hard colors included information from the lowest energy band. We confirm that Color-Color-Intensity diagrams can distinguish between systems containing black holes or neutron stars in all X-ray colors tested; this suggests an universality in the accretion processes governing these different classes. We suggest possible physical processes driving different classes of X-ray binaries to different locations in Color-Color-Intensity diagrams.

N Islam↗

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO 2 Reduction Using Physical Vapor Deposition Methods

Electrochemical CO 2 reduction (ECR) promises the replacement of fossil fuels as the source of feedstock chemicals and seasonal storage of renewable energy. While much progress has been made in catalyst development and electrochemical reactor design, few studies have addressed the effect of catalyst integration on device performance. Using a microfluidic gas diffusion electrolyzer, we systematically studied the effect of thickness and the morphology of electron beam (EB) and magnetron-sputtered (MS) Cu catalyst coatings on ECR performance. We observed that EB-Cu outperforms MS-Cu in current density, selectivity, and energy efficiency, with 400 nm thick catalyst coatings performing the best. Additionally, the superior performance of EB-Cu catalysts is assigned to their faceted surface morphology and sharper Cu/gas diffusion layer interface, which increases their hydrophobicity. Tests in a large-scale zero-gap electrolyzer yielded similar product selectivity distributions with an ethylene Faradaic efficiency of 39% at 200 mA/cm 2 , demonstrating the scalability for industrial ECR applications.

36 MATERIALS SCIENCE↗

CATALOG MATCHING WITH ASTROMETRIC CORRECTION AND ITS APPLICATION TO THE HUBBLE LEGACY ARCHIVE

Object cross-identification in multiple observations is often complicated by the uncertainties in their astrometric calibration. Due to the lack of standard reference objects, an image with a small field of view can have significantly larger errors in its absolute positioning than the relative precision of the detected sources within. We present a new general solution for the relative astrometry that quickly refines the World Coordinate System of overlapping fields. The efficiency is obtained through the use of infinitesimal three-dimensional rotations on the celestial sphere, which do not involve trigonometric functions. They also enable an analytic solution to an important step in making the astrometric corrections. In cases with many overlapping images, the correct identification of detections that match together across different images is difficult to determine. We describe a new greedy Bayesian approach for selecting the best object matches across a large number of overlapping images. The methods are developed and demonstrated on the Hubble Legacy Archive, one of the most challenging data sets today. We describe a novel catalog compiled from many Hubble Space Telescope observations, where the detections are combined into a searchable collection of matches that link the individual detections. The matches provide descriptions of astronomical objects involving multiple wavelengths and epochs. High relative positional accuracy of objects is achieved across the Hubble images, often sub-pixel precision in the order of just a few milliarcseconds. The result is a reliable set of high-quality associations that are publicly available online.

79 ASTRONOMY AND ASTROPHYSICS↗

Tropical Tropospheric Ozone Trends (1990 to 2022): A Re-evaluation Based on SHADOZ and IAGOS Profiles and TOMS/OMI Columns

Changes in tropical tropospheric ozone (TTO) are of importance because this region spans roughly a third of the Earth and portions of it are experiencing variability in trends of ozone precursors (CO, NO x , CH 4 and nonmethane hydrocarbons) associated with economic growth and fires. In addition to ozone changes affecting radiative forcing, tropical ozone is an important source of the OH radical and thus, the oxidizing capacity of the planet (Thompson, 1992). Recent studies examining TTO trends satellite and in-situ observations over the past ~25 years include: Thompson et al., JGR, 2021; Gaudel et al., ACP, 2023; Stauffer et al., ACP, 2023. The results show considerable regional and seasonal variability in TTO trends and sensitivity to data selection, frequency, and statistical method used. The satellite data vary most widely in method, time period and reliability. Here we revisit trends for the 1990-2022 period with the best-characterized buv-based satellite products that span that period (derived from TOMS and OMI, Ziemke et al., 2019). The satellite-based trends are compared to trends based on in-situ data from the Southern Hemisphere Additional Ozonesondes (SHADOZ) network (1998-2022), measurements from selected pre-SHADOZ and IAGOS commercial aircraft data (Gaudel et al., 2023). Among sensitivities examined are the dependence of ozone trends on start and end years, impacts of ENSO events and the COVID-19 perturbation to emissions. Two statistical methods are used, quantile regression (QR) and multiple linear regression (MLR). Trends of total TTO, ozone segments in the boundary layer (to ~700 hPa), and free troposphere (700-300 hPa) are compared.

ozone, OMI, tropospheric ozone, SHADOZ↗

Theoretical study of the accuracy of the pulse method, frontal analysis, and frontal analysis by characteristic points for the determination of single component adsorption isotherms

The adsorption isotherms of selected compounds are our main source of information on the mechanisms of adsorption processes. Thus, the selection of the methods used to determine adsorption isotherm data and to evaluate the errors made is critical. Three chromatographic methods were evaluated, frontal analysis (FA), frontal analysis by characteristic point (FACP), and the pulse or perturbation method (PM), and their accuracies were compared. Using the equilibrium-dispersive (ED) model of chromatography, breakthrough curves of single components were generated corresponding to three different adsorption isotherm models: the Langmuir, the bi-Langmuir, and the Moreau isotherms. For each breakthrough curve, the best conventional procedures of each method (FA, FACP, PM) were used to calculate the corresponding data point, using typical values of the parameters of each isotherm model, for four different values of the column efficiency (N = 500, 1000, 2000, and 10,000). Then, the data points were fitted to each isotherm model and the corresponding isotherm parameters were compared to those of the initial isotherm model. When isotherm data are derived with a chromatographic method, they may suffer from two types of errors: (1) the errors made in deriving the experimental data points from the chromatographic records; (2) the errors made in selecting an incorrect isotherm model and fitting to it the experimental data. Both errors decrease significantly with increasing column efficiency with FA and FACP, but not with PM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FIELD AND GLOBULAR CLUSTER LOW-MASS X-RAY BINARIES IN NGC 4278

We report a detailed spectral analysis of the population of low-mass X-ray binaries (LMXBs) detected in the elliptical galaxy NGC 4278 with Chandra. Seven luminous sources were studied individually, four in globular clusters (GCs) and three in the stellar field. The range of (0.3-8 keV) L{sub X} for these sources is {approx}(3-8) x 10{sup 38} erg s{sup -1}, suggesting that they may be black hole binaries (BHBs). Fitting the data with either single thermal accretion disk or power-law (PO) models results in best-fit temperatures of {approx}0.7-1.7 keV and {Gamma} {approx} 1.2-2.0, consistent with those measured in Galactic BHBs. Comparison of our results with simulations allows us to discriminate between disk and power-law-dominated emission, pointing to spectral/luminosity variability, reminiscent of Galactic BHBs. The BH masses derived from a comparison of our spectral results with the L{sub X} {approx} T {sup 4}{sub in} relation of Galactic BHBs are in the 5-15 M{sub sun} range, as observed in the Milky Way. The analysis of joint spectra of sources selected in three luminosity ranges (L{sub X} {>=} 1.5 x 10{sup 38} erg s{sup -1}, 6 x 10{sup 37}ergs{sup -1} {<=} L{sub X} < 1.5 x 10{sup 38} erg s{sup -1}, and L{sub X} < 6 x 10{sup 37} erg s{sup -1}) suggests that while the high-luminosity sources have prominent thermal disk emission components, power-law components are likely to be important in the mid- and low-luminosity spectra. Comparing low-luminosity average spectra, we find a relatively larger N{sub H} in the GC spectrum; we speculate that this may point to either a metallicity effect or to intrinsic physical differences between field and GC accreting binaries. Analysis of average sample properties uncovers a previously unreported L{sub X}-R{sub G} correlation (where R{sub G} is the galactocentric radius) in the GC-LMXB sample, implying richer LMXB populations in more central GCs. No such trend is seen in the field LMXB sample. We can exclude that the GC L{sub X}-R{sub G} correlation is the by-product of a luminosity effect and suggest that it may be related to the presence of more compact GCs at smaller galactocentric radii, fostering more efficient binary formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Curvature-Based Wavefront Sensor for Use on Extended, Arbitrary, Low-Contract Scenes Final Technical Report August 2004

A small amount of work has been done on this project; the strategy to be adopted has been better defined, though no experimental work has been started. 1) Wavefront error signals: The best choice appears use a lenslet array at a pupil image to produce defocused image pairs for each subaperture. Then use the method proposed by Molodij et al. to produce subaperture curvature signals. Basically, this method samples a moderate number of locations in the image where the value of the image Laplacian is high, then taking the curvature signal from the difference of the Laplacians of the extrafocal images at those locations. The tip-tilt error is obtained from the temporal dependence of the first spatial derivatives of an in-focus image, at selected locations where these derivatives are significant. The wavefront tilt can be obtained from the full-aperture image. 2) Extrafocal image generation: The important aspect here is to generate symmetrically defocused images, with dynamically adjustable defocus. The adjustment is needed because larger defocus is required before the feedback loop is closed, and at times when the seeing is worse. It may be that the usual membrane mirror is the best choice, though other options should be explored. 3) Detector: Since the proposed sensor is to work on solar granulation, rather than a point source, an array detector for each subaperture is required. A fast CMOS camera such as that developed by the National Solar Observatory would be a satisfactory choice. 4) Processing: Processing requirements have not been defined in detail, though significantly fewer operations per cycle are required than for a correlation tracker.

LaBonte, Barry J.↗

Efficient Electrochemical Reduction of CO 2 to Formate in Methanol Solutions by Mn‐Functionalized Electrodes in the Presence of Amines**

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO 2 in methanol solutions. Six different industrial amines are employed as co-catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO 2 reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO 2 and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO 2 in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO 2 to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TON HCOO- of 2.8×10 4 can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO 2 into liquid fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Primordial non-Gaussianity from the completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey – I: Catalogue preparation and systematic mitigation

ABSTRACT We investigate the large-scale clustering of the final spectroscopic sample of quasars from the recently completed extended Baryon Oscillation Spectroscopic Survey (eBOSS). The sample contains 343 708 objects in the redshift range 0.8 < z < 2.2 and 72 667 objects with redshifts 2.2 < z < 3.5, covering an effective area of $4699\, {\rm deg}^{2}$. We develop a neural network-based approach to mitigate spurious fluctuations in the density field caused by spatial variations in the quality of the imaging data used to select targets for follow-up spectroscopy. Simulations are used with the same angular and radial distributions as the real data to estimate covariance matrices, perform error analyses, and assess residual systematic uncertainties. We measure the mean density contrast and cross-correlations of the eBOSS quasars against maps of potential sources of imaging systematics to address algorithm effectiveness, finding that the neural network-based approach outperforms standard linear regression. Stellar density is one of the most important sources of spurious fluctuations, and a new template constructed using data from the Gaia spacecraft provides the best match to the observed quasar clustering. The end-product from this work is a new value-added quasar catalogue with the improved weights to correct for non-linear imaging systematic effects, which will be made public. Our quasar catalogue is used to measure the local-type primordial non-Gaussianity in a companion paper.

79 ASTRONOMY AND ASTROPHYSICS↗

A study of the large-scale infrared emission from a selected dark cloud

An investigation of the infrared emission energetics and embedded population in the rho Ophiuchi dark cloud is summarized. With a distance of approximately 140 pc, the rho Ophiuchi cloud is one of the closest regions of recent star formation. It is also one of the best studied such regions with numerous observations at all wavelengths. The IRAS data of the cloud provided a new glimpse of the overall structure of the cloud. In particular, the interaction of radiation from the Sco-Oph OB Association on the external heating of the cloud was very evident on Skyflux and Survey Co-Add images produced by IRAS. The infrared survey also revealed a number of new embedded sources in the cloud which have subsequently been observed from the ground. An earlier study explored the overall energetics of the cloud using the IRAS data. The main conclusions of that work were: (1) the overall luminosity of the cloud is well explained by the emission of the known B-stars, HD 147889, SR-3, and S1, along with a 15 percent contribution from the external radiation field; (2) the dust physical temperatures were significantly lower than the observed CO gas temperatures; and (3) dust grains are heated to only 10 percent to 20 percent of the total depth into the cloud. This analysis is extended by drawing on data from large-scale CO maps and from near-infrared surveys of the embedded population.

Young, Erick T.↗

Large Grooves in the South Polar Layered Deposits: Insights from Spacecraft Data and Terrestrial Analogs

The Martian polar layered deposits (PLD) are probably the best source of information about the recent climate history of Mars, but their origin and the mechanisms of accumulation are still a mystery. The polar layers are sedimentary deposits that most planetary scientists believe are composed of water ice and varying amounts of wind-blown dust, although their composition is poorly constrained. Interpretation of the observed polar stratigraphy in terms of global climate changes is complicated by the significant difference in surface ages between the north and south PLD inferred from crater statistics. The study reported here was undertaken as part of the landing site selection effort for the Mars Polar Lander (MPL) and Deep Space 2 (DS2) missions that made use of all available data. We used Mariner 9, Viking, and Mars Global Surveyor images of the south PLD in the area accessible to MPL and DS2 to evaluate the topography and morphology of grooves, terraced layers, and other features. Here we report on results from grooves that appear to have been carved by strong winds. Because these features are found throughout the interior of the PLD, where MPL and DS2 were targeted to land, their topographic characteristics were judged as important input for landing site safety assessment. The characteristics of the grooves also provide constraints and insights into aeolian processes in the polar regions and the effects these have on PLD ablation. Our results indicate that these grooves do not represent landing hazards at the scale of the images (approx. 80 m/pixel). Their topography and shape do not seem correlated with south PLD layering. No Earth analog of suitable scale exists, although the grooves bear some resemblance to smaller terrestrial deflation hollows found in soft sediment and ice. Additional information is contained in original extended abstract.

Bridges, N. T.↗

A study of the large-scale infrared emission from a selected dark cloud

An investigation of the infrared emission energetics and embedded population in the rho Ophiuchi dark cloud is summarized. With a distance of approximately 140 pc, the rho Ophiuchi cloud is one of the closest regions of recent star formation. It is also one of the best studied such regions with numerous observations at all wavelengths. The Infrared Astronomy Satellite (IRAS) data of the cloud provided a new glimpse of the overall structure of the cloud. In particular, the interaction of radiation from the Sco-Oph OB Association on the external heating of the cloud was very evident on Skyflux and Survey CO-Add images produced by IRAS. The infrared survey also revealed a number of new embedded sources in the cloud which have subsequently been observed from the ground. In earlier study, the overall energies of the cloud using the IRAS data was explored. The main conclusions of that work were: (1) the overall luminosity of the cloud is well explained by the emission of the known B-stars, HD 147889, SR-3, and S1, along with a 15 percent contribution from the external radiation field; (2) the dust physical temperatures were significantly lower than the observed CO gas temperatures; and (3) dust grains are heated to only 10 percent to 20 percent of the total depth into the cloud. This analysis was extended by drawing on data from large-scale CO maps of Loren (1989) and from near-infrared surveys of the embedded population.

Young, Erick T.↗

Demonstration of sub-meter GPS orbit determination and 1.5 parts in 10 to the 8th three-dimensional baseline accuracy

Strategies for the estimation of precise GPS orbits and ground baselines, designed to minimize error sources related to the GPS orbit accuracy and the tropospheric delay, are demonstrated. Using GPS data from field experiments conducted in 1985 and 1986, it is shown that, by carefully selecting well-known stations to serve as reference points and by using the GPS data to determine high-accuracy GPS orbits and to solve for wet tropospheric delay fluctuations, the 2000-km baselines in North America can now be estimated with the accuracy better than 1.5 parts in 10 to the 8th. Using these strategies, better than l-m accuracy was achieved for the two best-tracked satellites (of the seven total operational GPS satellites).

Lichten, Stephen M.↗

Chemical compositions of primitive solar system particles

Chemical studies of micrometeorites are of fundamental importance primarily because atmospheric entry selection effects (such as destruction of friable objects) are less significant than those for conventional meteorites. As a result, particles that have experienced very little postaccretional processing have a significant chance of surviving the Earth encounter and subsequent collection. Thus, chemical analyses of these relatively unaltered micrometeorites may lead to a better understanding of the compositions of the most primitive materials in the solar system and thereby constrain the conditions (physical and chemical) that existed in the early solar nebula. Micrometeorites have been collected from the stratosphere, polar ices, and ocean sediments, but the stratospheric collection is the best source for the most unaltered material because they are small and are not heated to their melting points. Despite the fact that the stratospheric micrometeorites have masses in the nanogram range, a variety of microanalytical techniques have been applied to bulk chemical analyses with part-per-million sensitivity. In some cases, multi-disciplinary studies (e.g., chemistry and mineralogy) have been performed on individual particles. The first-order conclusion is that the chondrite-like particles are chemically similar to carbonaceous chondrites but in detail are distinct from members of the conventional meteorite collection. The purpose of this paper is to provide an overview of the results to date and identify important areas for further study.

Sutton, Steve R.↗