Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalytic efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗
NASA NTRS1954

A flow calorimeter for determining combustion efficiency from residual enthalpy of exhaust gases

A flow calorimeter for determining the combustion efficiency of turbojet and ram-jet combustors from measurement of the residual enthalpy of combustion of the exhaust gas is described. Briefly, the calorimeter catalytically oxidizes the combustible constituents of exhaust-gas samples, and the resultant temperature rise is measured. This temperature rise is related to the residual enthalpy of combustion of the sample by previous calibration of the calorimeter. Combustion efficiency can be calculated from a knowledge of the residual enthalpy of the exhaust gas and the combustor input enthalpy. An accuracy of +-0.2 Btu per cubic foot was obtained with prepared fuel-air mixtures, and the combustion efficiencies of single turbojet combustors measured by both the flow-calorimeter and heat-balance methods compared within 3 percentage units. Flow calorimetry appears to be a suitable method for determining combustion efficiencies at high combustor temperatures where ordinary thermocouples cannot be used. The method is fundamentally more accurate than heat-balance methods at high combustion efficiencies and can be used to verify near-100-percent efficiency data.

Evans, Albert↗
DOE OSTI2025

Development of a Transferable Density-Functional Tight-Binding Model for Organic Molecules at the Water/Platinum Interface

A computationally efficient and transferable approach for modeling reactions at metal/water interfaces could significantly accelerate our understanding and ultimately the development of new catalytic transformations, particularly in the context of the emerging field of biomass conversion. Here, we present a parametrization of Pt–X (X = H, O, C) density-functional tight-binding (DFTB) for addressing this need. We first constructed Pt–H, Pt–O, and Pt–C repulsive potential splines. These pairwise parameters were then augmented to include many-body interactions using the Chebyshev Interaction Model for Efficient Simulation (ChIMES). We compare the geometrical and energetic performances of both DFTB and DFTB/ChIMES methods with DFT reference data across a variety of organic molecules at the platinum surface from nanoparticles to single-crystal surfaces. DFTB shows limited transferability between extended crystal surfaces and small nanoparticles. This transferability is significantly improved through the introduction of three-body interactions with Pt in DFTB/ChIMES, which provides consistent results across various systems, with reductions in the RMSD from around 30 kcal/mol in DFTB to around 10 kcal/mol. We demonstrate the stability and reliability of the obtained parameters by performing metadynamic simulations for the adsorption of phenol on Pt(111). We observe that DFTB itself is undersolvating the surface, leading to only one or two chemisorbed water molecules in a c(4 × 6) unit cell. In contrast, DFTB/ChIMES leads to a coverage of about 0.5 ML and successfully captures the chemisorbed mode of phenol at both the solid/liquid and the solid/gas interfaces. Furthermore, in agreement with experimental measurements, the adsorption at the solid/liquid interface is significantly weaker than that at the solid/gas interface. As a result, we highlight that even with DFTB, where we can accumulate dynamics for more than 1 ns for a given system, the simulations are not fully converged.

Adsorption↗
DOE OSTI2025

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

EFRC Accomplishments: Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC)

The vision of IMASC is to advance the fundamental science necessary to alter fundamental aspects of the chemical industries sector and its carbon footprint. The IMASC mission is to develop design principles for increasing the efficiency of key chemical syntheses using dilute alloy catalysts by quantitatively scaling from model studies to catalytic operation using advanced experiment and theory. One of the major challenges in catalysis is predicting catalytic behavior—especially selectivity. The IMASC team developed a methodology for obtaining critical information for selected catalytic processes using dilute alloy catalysts, that is widely applicable to modeling catalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries

The growth of lithium (Li) dendrites and the accumulation of dead Li (i.e., Li metal regions which are electronically disconnected from the current collector) significantly undermine the safety and performance of Li metal batteries. This study employs kilogram-scale atomic layer deposition technology to construct zinc oxide with a preferential (002) crystal orientation, which homogeneously forms on commercial carbon nanotube papers. Our approach emphasizes the importance of achieving a moderate Li adsorption energy and low Li migration energy barriers to suppress Li dendrite growth. In this work, we introduce the concept of "catalytic" effect for dead Li reconversion, as validated through time-of-flight secondary ion mass spectrometry, leading to a Li plating/stripping efficiency of 99.89%. The Ah-level Li metal pouch cells with high-nickel positive electrodes achieve a specific energy of 380 Wh kg -1 (based on the mass of the whole pouch cell) and demonstrate stable cycling under demanding conditions. Analysis of the cycled pouch cells confirms the structural integrity and provides insights into the mechanism of the dead Li "catalytic" conversion.

Shen, Huasen [Jianghan University, Wuhan (China)]↗
NASA NTRS1983

Advanced coal gasifier-fuel cell power plant systems design

Two advanced, high efficiency coal-fired power plants were designed, one utilizing a phosphoric acid fuel cell and one utilizing a molten carbonate fuel cell. Both incorporate a TRW Catalytic Hydrogen Process gasifier and regenerator. Both plants operate without an oxygen plant and without requiring water feed; they, instead, require makeup dolomite. Neither plant requires a shift converter; neither plant has heat exchangers operating above 1250 F. Both plants have attractive efficiencies and costs. While the molten carbonate version has a higher (52%) efficiency than the phosphoric acid version (48%), it also has a higher ($0.078/kWh versus $0.072/kWh) ten-year levelized cost of electricity. The phosphoric acid fuel cell power plant is probably feasible to build in the near term: questions about the TRW process need to be answered experimentally, such as weather it can operate on caking coals, and how effective the catalyzed carbon-dioxide acceptor will be at pilot scale, both in removing carbon dioxide and in removing sulfur from the gasifier.

Heller, M. E.↗
NASA NTRS2011

Development and Progress in Enabling the Photocatalyst Ti02 Visible-Light-Active

Photocatalytic oxidation (PCO) of organic contaminants is a promising air and water quality management approach which offers energy and cost savings compared to thermal catalytic oxidation (TCO). The most widely used photocatalyst, anatase TiO2, has a wide band gap (3.2 eV) and is activated by UV photons. Since solar radiation consists of less than 4% UV, but contains 45% visible light, catalysts capable of utilizing these visible photons need to be developed to make peo approaches more efficient, economical, and safe. Researchers have attempted various approaches to enable TiO2 to be visible-light-active with varied degrees of success'. Strategies attempted thus far fall into three categories based on their electrochemical' mechanisms: 1) narrowing the band gap of TiO2 by implantation of transition metal elements or nonmetal elements such as N, S, and C, 2) modifying electron-transfer processes during PCO by adsorbing sensitizing dyes, and 3) employing light-induced interfacial electron transfer in the heteronanojunction systems consisting of narrow band gap semiconductors represented by metal sulfides and TiO2. There are diverse technical approaches to implement each of these strategies. This paper presents a review of these approaches and results of the photocatalytic activity and photonic efficiency of the end .products under visible light. Although resulting visible-light-active (VLA) photocatalysts show promise, there is often no comparison with unmodified TiO2 under UV. In a limited number of studies where such comparison was provided, the UV-induced catalytic activity of bare TiO2 is much greater than the visible-light-induced catalytic activity of the VLA catalyst. Furthermore, VLA-catalysts have much lower quantum efficiency compared to the approx.50% quantum efficiency of UV-catalysts. This stresses the need for continuing research in this area.

Levine, Lanfang H.↗
DOE OSTI2025

Surface engineering of Pt nanocatalysts with transition metal oleates for selective catalysis: a case study on the hydrogenation of α,β-unsaturated aldehydes

Selective and active catalysts enable effective use of feedstocks, reduced energy consumption and waste generation. Tuning the electronic structure of heterogeneous metal nanocatalysts via their surface modifications is a promising strategy to design highly selective and active catalysts for the synthesis of harder to make and more cost-efficient products. Here, we introduce transition metal oleates as a new class of ligands to engineer the catalytically active and very selective surface in organic solvents. Using citral hydrogenation and 5 nm Pt NPs as a model reaction and model catalytic system, respectively, we show that surface engineering of Pt nanocatalysts with metal oleates allows synthesis of desired partially hydrogenated product (geraniol) with ∼90% conversion with selectivity over 93%. We demonstrate that the selective synthesis of the unsaturated alcohols catalyzed by Pt NPs modified by adsorption of the transition metal salts cannot be explained by the widely accepted mechanism of preferred coordination of C$=$O groups by Lewis acids (e.g. partially oxidized transition surface metals). Our results indicate that C$=$O groups prefer to bind to negatively charged surfaces. We propose the explanation on how the adsorption of transition metal oleates can result in the increased electron density at the surface of Pt nanoparticles. Our study not only provides reliable solutions to selective hydrogenation but opens a new possibility of using metal oleates for the electronic ligand effect.

Kwon, Soon Gu [Argonne National Laboratory (ANL), ↗
NASA NTRS2003

Organics Synthesized Using Iron-Grain Silicates

We use Fischer-Tropsch type (FTT) synthesis to produce hydrocarbons by hydrogenating carbon monoxide via catalytic reactions. The products of these reactions have been studied using 'natural' catalysts and calculations of the efficiency of FTT synthesis in the Solar Nebula suggest that these types of reactions could make significant contributions to the composition of material near three AU. We coat Fe-silicate grains with organic material using FTT synthesis to simulate the chemistry in the early Solar Nebula. In our experimental setup, we roughly model a nebular environment where grains are successively transported from hot to cold regions of the nebula. In other words, the starting gases and FTT products are continuously circulated through the grains at high temperature with intervals of cooling. Organics generated in this manner could represent the carbonaceous material incorporated in comets and meteorites. We analyze the resulting organics and present the results.

Johnson, N. M.↗
NASA NTRS1992

Casein kinase II protein kinase is bound to lamina-matrix and phosphorylates lamin-like protein in isolated pea nuclei

A casein kinase II (CK II)-like protein kinase was identified and partially isolated from a purified envelope-matrix fraction of pea (Pisum sativum L.) nuclei. When [gamma-32P]ATP was directly added to the envelope-matrix preparation, the three most heavily labeled protein bands had molecular masses near 71, 48, and 46 kDa. Protein kinases were removed from the preparation by sequential extraction with Triton X-100, EGTA, 0.3 M NaCl, and a pH 10.5 buffer, but an active kinase still remained bound to the remaining lamina-matrix fraction after these treatments. This kinase had properties resembling CK II kinases previously characterized from animal and plant sources: it preferred casein as an artificial substrate, could use GTP as efficiently as ATP as the phosphoryl donor, was stimulated by spermine, was calcium independent, and had a catalytic subunit of 36 kDa. Some animal and plant CK II kinases have regulatory subunits near 29 kDa, and a lamina-matrix-bound protein of this molecular mass was recognized on immunoblot by anti-Drosophila CK II polyclonal antibodies. Also found associated with the envelope-matrix fraction of pea nuclei were p34cdc2-like and Ca(2+)-dependent protein kinases, but their properties could not account for the protein kinase activity bound to the lamina. The 71-kDa substrate of the CK II-like kinase was lamin A-like, both in its molecular mass and in its cross-reactivity with anti-intermediate filament antibodies. Lamin phosphorylation is considered a crucial early step in the entry of cells into mitosis, so lamina-bound CK II kinases may be important control points for cellular proliferation.

NASA Discipline Plant Biology↗
NASA NTRSDate not supplied

Regenerative Fuel Cell Systems for Lunar Surface Applications

A discrete Regenerative Fuel Cell (RFC), comprised of a Proton Exchange Membrane (PEM) Fuel Cell (FC) system integrated with a PEM Electrolyzer (EZ) system, can provide energy conversion and storage options for applications where batteries are not practical. This includes missions on the lunar surface where long charge and discharge periods result in extremely high battery system mass for sufficient energy storage. While both PEM FC and PEM EZ are mature terrestrial technologies, there is still a lot of development needed for aerospace applications. Integrating the PEM FC and PEM EZ systems together requires the integration of multiple thermal, fluid, and electrical subsystems, increasing the complexity of the overall RFC system. Additionally, Balance of Plant (BoP) components and subsystems play a crucial role in the effective performance to maximize the RFC round trip efficiency. This presentation will give a high-level overview of RFCs, select BoP components including a catalytic recombiner and gas drying equipment, and the current testing that is being done on the RFC project at NASA GRC.

Jessica Cashman↗
DOE OSTI2025

Nano-Engineered Interfaces in Dual-Layer Electrodes for Protonic Ceramic Cells with Enhanced Stability and Kinetics

Enhancing interfacial stability and charge transfer in protonic ceramic cells (PCCs) remains a critical challenge, as structural degradation and interfacial resistance often compromise durability and efficiency. Here, we report a nanoengineered dual-layer oxygen electrode architecture designed to address these limitations by introducing a fine-grained nanoparticle interfacial contact layer beneath a porous catalytic backbone. The nanoscale powders, through enhanced sintering activity, densify into a robust interfacial layer that promotes strong chemical bonding, uniform adhesion, and continuous ionic/electronic pathways with the BCZYYb electrolyte. This hierarchical architecture mitigates delamination, redistributes mechanical stress, and establishes efficient charge and mass transport channels without relying on corrosive surface treatments. Electrochemical evaluation demonstrates that the dual-layer design markedly reduces interfacial polarization resistance and accelerates electrode kinetics. Compared to the single-layer counterpart, the architecture achieves a peel strength of 44.53 N/cm 2 , a 40% improvement in peak power density (0.96 W cm –2 at 600 °C), and a 130% enhancement in electrolysis current density (4.78 A cm –2 at 1.57 V). Faradaic efficiency remains as high as 88% under high steam concentrations, underscoring minimal charge loss during practical operation. Notably, the electrode retains stability across 450–600 °C and under transient voltage cycling, with impedance spectra confirming suppressed interfacial resistance growth over prolonged use. These results highlight nanoscale interface engineering as a powerful route to enhance both mechanical robustness and electrochemical kinetics in PCCs. The demonstrated scalability and durability of this architecture provide a versatile platform for advancing solid-state electrochemical systems, including reversible fuel cells and high-efficiency hydrogen production technologies.

Faradaic efficiency↗
NASA NTRS1990

Catalytic ignition model in a monolithic reactor with in-depth reaction

Two transient models have been developed to study the catalytic ignition in a monolithic catalytic reactor. The special feature in these models is the inclusion of thermal and species structures in the porous catalytic layer. There are many time scales involved in the catalytic ignition problem, and these two models are developed with different time scales. In the full transient model, the equations are non-dimensionalized by the shortest time scale (mass diffusion across the catalytic layer). It is therefore accurate but is computationally costly. In the energy-integral model, only the slowest process (solid heat-up) is taken as nonsteady. It is approximate but computationally efficient. In the computations performed, the catalyst is platinum and the reactants are rich mixtures of hydrogen and oxygen. One-step global chemical reaction rates are used for both gas-phase homogeneous reaction and catalytic heterogeneous reaction. The computed results reveal the transient ignition processes in detail, including the structure variation with time in the reactive catalytic layer. An ignition map using reactor length and catalyst loading is constructed. The comparison of computed results between the two transient models verifies the applicability of the energy-integral model when the time is greater than the second largest time scale of the system. It also suggests that a proper combined use of the two models can catch all the transient phenomena while minimizing the computational cost.

Tien, Ta-Ching↗
NASA NTRS2008

Performance Assessment of the Exploration Water Recovery System

A new water recovery system architecture designed to fulfill the National Aeronautics and Space Administration s (NASA) Space Exploration Policy has been tested at the Marshall Space Flight Center (MSFC). This water recovery system architecture evolved from the current state-of-the-art system developed for the International Space Station (ISS). Through novel integration of proven technologies for air and water purification, this system promises to elevate existing system optimization. The novel aspect of the system is twofold. First, volatile organic compounds (VOC) are removed from the cabin air via catalytic oxidation in the vapor phase, prior to their absorption into the aqueous phase. Second, vapor compression distillation (VCD) technology processes the condensate and hygiene waste streams in addition to the urine waste stream. Oxidation kinetics dictate that removing VOCs from the vapor phase is more efficient. Treating the various waste streams by VCD reduces the load on the expendable ion exchange and adsorption media which follows, as well as the aqueous-phase catalytic oxidation process further downstream. This paper documents the results of testing this new architecture.

Carter. D. Layne↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Engineering PdAu/CeO 2 Alloy/Oxide Interfaces for Selective Methane‐to‐Methanol Conversion with Water

The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO 2 catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd 0.3 Au 0.7 /CeO 2 catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (∼80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO 2 efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO 2 composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO 2 interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Production of bio-based lactones as monomers for a circular polymer economy

To create a circular plastics economy, new polymers are being developed that can be chemically recycled. Circular polyesters are of particular interest and to this end, lactones are ideal monomers. Here, this Review examines catalytic routes to convert diols, hydroxy acids, and dicarboxylic acids to lactones, focusing on the development of scalable, atom-economic, and energy-efficient conversions of bio-derived feedstocks. Free energy analysis is used to inform process choices, such as reactor type, reaction phase, and use of solvent. Catalyst design principles are summarized for both direct (bio-substrate to lactone) and indirect (bio-substrate to intermediate to lactone) routes. Finally, we summarize literature that shows that many lactone precursors are readily accessible from various metabolic and chemo-catalytic pathways. Transitioning to bio-based monomers offers an opportunity to reduce reliance on fossil carbon resources, but requires advanced catalytic processes informed by mechanistic insights.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗