Search NASA⌕ Search

SEARCH · Search NASA

Results for “change management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

DC Microgrid Reliability Enhancement with Adaptive Converter Thermal Management

Due to the different device selections, aging levels, and thermal dissipation performance, some converters may take additional thermal stress on switching devices than others in paralleled converter systems, which will reduce system reliability. To address this problem, this paper proposes a power-sharing strategy with adaptive thermal management. First, the temperature-based power loss model and electrical-thermal model are established. Based on that, a high-accuracy IGBT junction temperature estimate considering the power loss-temperature coupling can be achieved. Further, the thermal-sharing for all the switching devices in paralleled converters can be achieved with the proposed adaptive thermal management strategy. The proposed strategy can change the power-sharing ratio adaptively according to the system operation conditions, which will contribute to the system reliability enhancement. The effectiveness of the proposed strategy is verified through PLECS thermal simulation and joint real-time simulation with Dspace and RT-box.

DC microgrid↗
DOE OSTI2020

The Importance of Inventory for Informing Waste Strategy - 20280

A waste inventory aims to present the best available information about the nature, quantity and location of radioactive wastes and materials at a facility, site or in a country. Quality inventory data is necessary for developing appropriate strategies and plans for managing radioactive wastes and materials, with high standards of protection for people and the environment. The inventory of wastes will change over time due to a wide range of technical, commercial or policy reasons, for example, if reactor lifetimes are extended, if decommissioning strategies change or if new technologies are introduced for managing waste. Inventory information can also improve as better waste characterisation data becomes available. At a facility or site level, good quality inventory data are needed to underpin decision making about the waste management options and to demonstrate compliance with the chosen treatment or disposal route. At a site and country level, knowledge of the inventory can drive the improvement to waste strategy; waste management asset and service planning; and implementation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Optimizing Selection Pressures and Pest Management to Maximize Cultivation Yield (OSPREY) (Final Technical Report)

This project was proposed in response to AOI 1, Cultivation Intensification Processes for Algae, within the FY19 Bioenergy Technologies Office Multi-Topic Funding Opportunity Announcement (FOA Number: DE-FOA-0002029). The work was designed to address a critical industry need to improve annualized productivity, stability, and quality of algal production strains for biofuels and bioproducts. The overall project goals were to generate process innovations rooted in established outdoor systems for strain selection, improvement, maintenance, and cultivation as well as pest detection and tracking. Planned advances included a 50% improvement in harvest yield based on AFDW (g m 2 d -1 ), 50% improvement in robustness based on stability metrics (e.g., high-productivity cultivation days, pond uptime), and 20% improvement in conversion yield. Individually, each of our planned process improvements (e.g., pest tracking) had the potential to increase productivity. However, to realize increases in yield at the system level, improvements to one unit’s process must be balanced against potential effects on other processes. For example, changes to strains, cultivation, and pest management developed in isolation may hurt other unit operations. Therefore, a critical success factor of the project was the integration of the pipeline components, achieved through iterative field-to- (short term) lab testing. In addition, through sustainability models, we evaluated how improvements would alter industry scenarios.

09 BIOMASS FUELS↗
DOE OSTI2021

Climate warming threatens the persistence of a community of disturbance-adapted native annual plants

With ongoing climate change, populations are expected to exhibit shifts in demographic performance that will alter where a species can persist. This presents unique challenges for managing plant populations and may require ongoing interventions, including in situ management or introduction into new locations. However, few studies have examined how climate change may affect plant demographic performance for a suite of species, or how effective management actions could be in mitigating climate change effects. Over the course of two experiments spanning 6 yr and four sites across a latitudinal gradient in the Pacific Northwest, United States, here we manipulated temperature, precipitation, and disturbance intensity, and quantified effects on the demography of eight native annual prairie species. Each year we planted seeds and monitored germination, survival, and reproduction. We found that disturbance strongly influenced demographic performance and that seven of the eight species had increasingly poor performance with warmer conditions. Across species and sites, we observed 11% recruitment (the proportion of seeds planted that survived to reproduction) following high disturbance, but just 3.9% and 2.3% under intermediate and low disturbance, respectively. Moreover, mean seed production following high disturbance was often more than tenfold greater than under intermediate and low disturbance. Importantly, most species exhibited precipitous declines in their population growth rates (λ) under warmer-than-ambient experimental conditions and may require more frequent disturbance intervention to sustain populations. Aristida oligantha, a C4 grass, was the only species to have λ increase with warmer conditions. These results suggest that rising temperatures may cause many native annual plant species to decline, highlighting the urgency for adaptive management practices that facilitate their restoration or introduction to newly suitable locations. Frequent and intense disturbances are critical to reduce competitors and promote native annuals’ persistence, but even such efforts may prove futile under future climate regimes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Global burned area increasingly explained by climate change

Fire behaviour is changing in many regions worldwide. However, nonlinear interactions between fire weather, fuel, land use, management and ignitions have impeded formal attribution of global burned area changes. Here, in this work, we demonstrate that climate change increasingly explains regional burned area patterns, using an ensemble of global fire models. The simulations show that climate change increased global burned area by 15.8% (95% confidence interval (CI) [13.1–18.7]) for 2003–2019 and increased the probability of experiencing months with above-average global burned area by 22% (95% CI [18–26]). In contrast, other human forcings contributed to lowering burned area by 19.1% (95% CI [21.9–15.8]) over the same period. Moreover, the contribution of climate change to burned area increased by 0.22% (95% CI [0.22–0.24]) per year globally, with the largest increase in central Australia. Our results highlight the importance of immediate, drastic and sustained GHG emission reductions along with landscape and fire management strategies to stabilize fire impacts on lives, livelihoods and ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

E3SM‐GCAM: A Synchronously Coupled Human Component in the E3SM Earth System Model Enables Novel Human‐Earth Feedback Research

Abstract Modeling human‐environment feedbacks is critical for assessing the effectiveness of climate change mitigation and adaptation strategies under a changing climate. The Energy Exascale Earth System Model (E3SM) now includes a human component, with the Global Change Analysis Model (GCAM) at its core, that is synchronously coupled with the land and atmosphere components through the E3SM coupling software. Terrestrial productivity is passed from E3SM to GCAM to make climate‐responsive land use and CO 2 emission projections for the next 5‐year period, which are interpolated and passed to E3SM annually. Key variables affected by the incorporation of these feedbacks include land use/cover change, crop prices, terrestrial carbon, local surface temperature, and climate extremes. Regional differences are more pronounced than global differences because the effects are driven primarily by differences in land use. This novel system enables a new type of scenario development and provides a powerful modeling framework that facilitates the addition of other feedbacks between these models. This system has the potential to explore how human responses to climate change impacts in a variety of sectors, including heating/cooling energy demand, water management, and energy production, may alter emissions trajectories and Earth system changes. Plain Language Summary Earth system models help us understand how humans are changing the climate. Currently, these models do not include human systems, so predetermined greenhouse gas, aerosol, and land use change data are input to these models. These data do not reflect human responses to changes projected by Earth system models. We have added a human component to an Earth system model to represent human responses to environmental change and calculate corresponding greenhouse gas and land use change data instead of using predetermined data. Including this human component changes projections of land use, land carbon storage, and regional climate. Key Points We have incorporated a novel, advanceable human component in an Earth system model to simulate human‐Earth feedbacks Including terrestrial productivity feedbacks from the Earth to the human systems affects land change, crop prices, carbon, and climate Regional effects of including terrestrial productivity feedbacks are greater than global effects because land change is the main driver

E3SM↗
DOE OSTI2024

Unveiling the Potential of MeshGraphNets for Predicting Subsurface Evolution in Carbon Storage Projects

This is the conference paper accompanying an oral presentation “Unveiling the Potential of MeshGraphNets for Predicting Subsurface Evolution in Carbon Storage Projects” at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24 , 2024. Carbon capture and storage (CCS) technology is critical for mitigating climate change but requires effective subsurface reservoir management to ensure safe containment of injected CO2. Accurate predictions of reservoir pressure and saturation are essential for assessing long-term CCS performance. Traditional numerical simulations, while effective, are computationally intensive, time-consuming, and constrained by data discretization. Previous work has shown the effectiveness of MeshGraphNets (MGN), a graph-based machine learning framework, as an innovative alternative for predicting reservoir behavior. MGN leverages graph neural networks (GNNs) and mesh representations to model complex geological formations, offering superior adaptability across different discretizations and reservoir configurations. Classic MGN implementations utilize an autoregressive technique to predict future behavior based on current predictions, but this technique is hampered by error accumulation over time. To enhance the model accuracy in time-series predictions, this study implemented a multi-step rollout strategy that integrates autoregressive predictions during training to stabilize prediction of saturation over time. Using the Illinois Basin – Decatur Project (IBDP) dataset, comprising 100 simulations of CO2 injection, pressure, and saturation changes, the framework demonstrated its ability to learn spatial dependencies and temporal dynamics. With inputs including permeabilities, porosities, and injection rates, MGN accurately predicted CO2 plume evolution over time, even with limited training data. Moreover, the addition of a multi-step rollout procedure during training improved the ability of MGN to predict stably over time by ~15%. This research positions MGN, enhanced with multi-step rollout capabilities, as a robust and efficient tool for CCS applications. It advances the field by enabling precise, computationally efficient predictions of reservoir behavior, providing a foundation for the broader adoption of machine learning frameworks in CCS and other geoscience domains.

Holcomb, Paul↗
DOE OSTI2021

Modelled land use and land cover change emissions – a spatio-temporal comparison of different approaches

Abstract. Quantifying the net carbon flux from land use and land cover changes (fLULCC) is critical for understanding the global carbon cycle and, hence, to support climate change mitigation. However, large-scale fLULCC is not directly measurable and has to be inferred from models instead, such as semi-empirical bookkeeping models and process-based dynamic global vegetation models (DGVMs). By definition, fLULCC estimates are not directly comparable between these two different model types. As an important example, DGVM-based fLULCC in the annual global carbon budgets is estimated under transient environmental forcing and includes the so-called loss of additional sink capacity (LASC). The LASC results from the impact of environmental changes on land carbon storage potential of managed land compared to potential vegetation and accumulates over time, which is not captured in bookkeeping models. The fLULCC from transient DGVM simulations, thus, strongly depends on the timing of land use and land cover changes mainly because LASC accumulation is cut off at the end of the simulated period. To estimate the LASC, the fLULCC from pre-industrial DGVM simulations, which is independent of changing environmental conditions, can be used. Additionally, DGVMs using constant present-day environmental forcing enable an approximation of bookkeeping estimates. Here, we analyse these three DGVM-derived fLULCC estimations (under transient, pre-industrial, and present-day forcing) for 12 models within 18 regions and quantify their differences as well as climate- and CO2-induced components and compare them to bookkeeping estimates. Averaged across the models, we find a global fLULCC (under transient conditions) of 2.0±0.6 PgC yr−1 for 2009–2018, of which ∼40 % are attributable to the LASC (0.8±0.3 PgC yr−1). From 1850 onward, the fLULCC accumulated to 189±56 PgC with 40±15 PgC from the LASC. Around 1960, the accumulating nature of the LASC causes global transient fLULCC estimates to exceed estimates under present-day conditions, despite generally increased carbon stocks in the latter. Regional hotspots of high cumulative and annual LASC values are found in the USA, China, Brazil, equatorial Africa, and Southeast Asia, mainly due to deforestation for cropland. Distinct negative LASC estimates in Europe (early reforestation) and from 2000 onward in the Ukraine (recultivation of post-Soviet abandoned agricultural land), indicate that fLULCC estimates in these regions are lower in transient DGVM compared to bookkeeping approaches. Our study unravels the strong dependence of fLULCC estimates on the time a certain land use and land cover change event happened to occur and on the chosen time period for the forcing of environmental conditions in the underlying simulations. We argue for an approach that provides an accounting of the fLULCC that is more robust against these choices, for example by estimating a mean DGVM ensemble fLULCC and LASC for a defined reference period and homogeneous environmental changes (CO2 only).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Evaluation of Distributed Power Apportioning with Net Load Management Engine in Microgrids Using Power Hardware-in-the-Loop Simulation

This article presents the performance evaluation of ratio consensus-based distributed power apportioning engine along with centralized net load management (NLM) engine that ensures viable and stable operation of an islanded microgrid. Managing net load variability in a microgrid with high penetrations of uncertain renewable generation and ever-changing load demands is a crucial need in order to ensure viable and stable operation of the microgrid. Centralized “dispatch-rule”-based and/or multi-agent-based distributed control of distributed energy resources (DERs) in microgrid are well accepted for microgrid by adapting ANSI/ISA-95-based hierarchical control architecture. In the application where microgrid network has large geographical span with multiple DERs dispersed in the network, high penetration of uncertain renewable energy resources, and ever-changing load demands, a judicious selection of techniques/solutions for managing net-load resources for maintaining viability and stability is required. With this motivation, this article proposes a novel solution to mitigate the challenges by incorporating a mixed centralized NLM engine and distributed power apportioning control of DERs and loads. A power-hardware-in-the-loop (PHIL) -based experiment is conducted with the centralized NLM engine and the distributed power apportioning engine along with two commercial inverters. The experimental results validates the efficacy of the proposed method in ensuring viability and stability of a microgrid.

hardware-in-the-loop simulation↗
DOE OSTI2021

Monitoring agroecosystem productivity and phenology at a national scale: A metric assessment framework

Effective measurement of seasonal variations in the timing and amount of production is critical to managing spatially heterogeneous agroecosystems in a changing climate. Although numerous technologies for such measurements are available, their relationships to one another at a continental extent are unknown. Using data collected from across the Long-Term Agroecosystem Research (LTAR) network and other networks, we investigated correlations among key metrics representing primary production, phenology, and carbon fluxes in croplands, grazing lands, and crop-grazing integrated systems across the continental U.S. Metrics we examined included gross primary productivity (GPP) estimated from eddy covariance (EC) towers and modelled from the Landsat satellite, Landsat NDVI, and vegetation greenness (Green Chromatic Coordinate, GCC) from tower-mounted PhenoCams for 2017 and 2018. Overall, our analysis compared production dynamics estimated from three independent ground and remote platforms using data for 34 agricultural sites constituting 51 site-years of co-located time series. Pairwise sensor comparisons across all four metrics revealed stronger correlation and lower root mean square error (RMSE) between end of season (EOS) dates (Pearson R ranged from 0.6 to 0.7 and RMSE from 32.5 to 67.8) than start of season (SOS) dates (0.46 to 0.69 and 40.4 to 66.2). Overall, moderate to high correlations between SOS and EOS metrics complemented one another except at some lower productivity grazing land sites where estimating SOS can be challenging. Growing season length estimates derived from 16-day satellite GPP (179.1 days) were significantly longer than those from PhenoCam G CC (70.4 days, p adj < 0.0001) and EC GPP (79.6 days, p adj < 0.0001). Landscape heterogeneity did not explain differences in SOS and EOS estimates. Annual integrated estimates of productivity from EC GPP and PhenoCam G CC diverged from those estimated by Landsat GPP and NDVI at sites where annual production exceeds 1000 gC/m –2 yr –1 . Based on our results, we developed a “metric assessment framework” that articulates where and how metrics from satellite, eddy covariance and PhenoCams complement, diverge from, or are redundant with one another. The framework was designed to optimize instrumentation selection for monitoring, modeling, and forecasting ecosystem functioning with the ultimate goal of informing decision-making by land managers, policy-makers, and industry leaders working at multiple scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Drivers of Water Use in the Agricultural Sector of the European Union 27

Population growth and the uncertain hazards that accompany climate change have put increasing pressure on the management and sustainability of water. It has a direct impact on agriculture and its domestic and international supply chain linkages. As one of the largest agricultural producers in the world, the European Union (EU) is particularly sensitive to changes in water availability. Therefore, here we perform a structural decomposition analysis based on the recently released EXIOBASE 3 database to examine in depth how changes in water input coefficients, in final demand and in technology have affected changes in water use across crops. Crop production consumes 99% of the direct water in agriculture. Our results show that the largest EU crop producers have experienced an increase in water use that is mostly driven by changes in technology. On the other hand, several Mediterranean countries, where water scarcity has been a problem for years, have decreased their water consumption mostly thanks to an improvement in their water intensity. Results by crop are consistent with those at the aggregated level except for vegetables of which water use changes have been primarily driven by changes in final demand and water intensity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Automated Data Review of Analytical Laboratory Results at Los Alamos National Laboratory - 20299

Newport News Nuclear BWXT-Los Alamos, LLC (N3B) collects samples in support of the U.S. Department of Energy's (DOE) Office of Environmental Management (EM) Los Alamos Legacy Cleanup Contract (LLCC). N3B receives and reviews over 1.6 million sample data points annually in support of various ongoing environmental monitoring and remediation projects of the LLCC. N3B must demonstrate and document that reported external analytical laboratory data produced for the LLCC are of sufficient quality to fulfill their intended purpose and to support defensible decision making as described in EPA QA/G4 Guidance for the Data Quality Objectives Process 1994. In 2018, N3B assumed management of the LLCC along with the Environmental Information Management (EIM) database that contains all historical and current environmental data associated with the LLCC. The entire EIM database is shared between N3B, Triad National Security, LLC (Triad), and New Mexico Environment Department (NMED). These three parties jointly manage the database, its configuration, and changes / updates. All environmental data that are entered into EIM are updated and available, on a daily basis, in the linked public database Intellus New Mexico (Intellus). The quality and defensibility of the environmental data generated from sampling activities is a key component of an effective remediation process. Providing quality data is accomplished through a data assessment process that includes examination, verification, and validation. Examination is the assessment of completeness of the deliverables, identification of any reporting errors, and determining the usability of the data based on the laboratory's evaluation of its data as described in the case narrative received with the data. Verification consists of an evaluation of the Electronic Data Deliverables (EDD) data report to determine the extent to which the external analytical laboratories met method and contract-specific quality control and reporting requirements. Validation consists of determining the data quality and the extent to which the external analytical laboratories accurately and completely reported all sample and quality control results and satisfied all contract requirements. EIM contains an automatic Data Validation Module which performs automated data review (DVM ADR). DVM ADR is a tool to assist in the validation process. When DVM ADR is used in conjunction with manual examination of sample data packages, the combination of the two will meet and exceed the requirements of verification. N3B recognized an opportunity for process improvement, focusing on DVM ADR configuration and enhancements in EIM. Testing EIM's configuration provided proof of the DVM ADR's capabilities and flexibility to accurately perform routine data checks based on analytical methods and regulatory requirements. In addition, the DVM ADR module was improved through enhancements for all analytes, particularly upgrades for radiochemistry data. Extensive testing of the DVM ADR module occurred using EDDs from actual laboratory analyses on the EIM testing site. During this process, N3B manipulated EDD information to verify that the actual outcomes matched the expected outcomes. The results of this testing were shared with the database architects, and configuration improvements were identified to address these results. During this process, N3B identified that the radiochemical DVM ADR capabilities were underutilized, and so enhanced the DVM ADR functionality with respect to radioanalytical assessment. N3B environmental data uploads to Intellus on a daily basis from EIM, once the analytical data undergoes examination and verification. As such, it is important to have a high level of confidence in the quality and defensibility of the data. The process of manual examination, along with the DVM ADR, in conjunction with full validation of a percentage the data specified through the Data Quality Objectives greatly increases efficiency of data review and confidence level of the quality of the data, and gives the project managers, governmental offices, and the public expedited access to high-quality data. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Using mixed methods to construct and analyze a participatory agent-based model of a complex Zimbabwean agro-pastoral system

Complex social-ecological systems can be difficult to study and manage. Simulation models can facilitate exploration of system behavior under novel conditions, and participatory modeling can involve stakeholders in developing appropriate management processes. Participatory modeling already typically involves qualitative structural validation of models with stakeholders, but with increased data and more sophisticated models, quantitative behavioral validation may be possible as well. In this study, we created a novel agent-basedmodel applied to a specific context: Zimbabwean non-governmental organization the Muonde Trust has been collecting data on their agro-pastoral system for the last 35 years and had concerns about land-use planning and the effectiveness of management interventions in the face of climate change. We collaboratively created an agent-based model of their system using their data archive, qualitatively calibrating it to the observed behavior of the real system without tuning any parameters to match specific quantitative outputs. We then behaviorally validated the model using quantitative community-based data and conducted a sensitivity analysis to determine the relative impact of underlying parameter assumptions, Indigenous management interventions, and different rainfall variation scenarios. We found that our process resulted in a model which was successfully structurally validated and sufficiently realistic to be useful for Muonde researchers as a discussion tool. The model was inconsistently behaviorally validated, however, with some model variables matching field data better than others. We observed increased model system instability due to increasing variability in underlying drivers (rainfall), and also due to management interventions that broke feedbacks between the components of the system. Interventions that smoothed year-to-year variation rather than exaggerating it tended to improve sustainability. The Muonde trust has used the model to successfully advocate to local leaders for changes in land-use planning policy that will increase the sustainability of their system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Detecting multi‐scale riverine topographic variability and its influence on Chinook salmon habitat selection

Abstract Quantifying geomorphic conditions that impact riverine ecosystems is critical in river management due to degraded riverine habitat, changing flow and thermal conditions, and increasing anthropogenic pressure. Geomorphic complexity at different scales directly impacts habitat heterogeneity and affects aquatic biodiversity resilience. Here we showed that the combination of continuous spatial survey at high resolution, topobathymetric light detection and ranging (LiDAR), and continuous wavelet analysis can help identify and characterize that complexity. We used a continuous wavelet analysis on 1‐m resolution topobathymetry in three rivers in the Salmon River Basin, Idaho (USA), to identify different scales of topographic variability and the potential effects of this variability on salmonid redd site selection. On each river, wavelet scales characterized the topographic variability by portraying repeating patterns in the longitudinal profile. We found three major representative spatial wavelet scales of topographic variability in each river: a small wavelet scale associated with local morphology such as pools and riffles, a mid‐wavelet scale that identified larger channel unit features, and a large wavelet scale related to valley‐scale controls. The small wavelet scale was used to identify pools and riffles along the entire lengths of each river as well as areas with differing riffle‐pool development. Areas along the rivers with high local topographic variability (high wavelet power) at all wavelet scales contained the largest features (i.e., deepest or longest pools) in the systems. By comparing the wavelet power for each wavelet scale to Chinook salmon redd locations, we found that higher small‐scale wavelet power, which is related to pool‐riffle topography, is important for redd site selection. The continuous wavelet methodology objectively identified scales of topographic variability present in these rivers, performed efficient channel‐unit identification, and provided geomorphic assessment without laborious field surveys.

Duffin, Jenna↗
DOE OSTI2021

Restoring wetlands on intensive agricultural lands modifies nitrogen cycling microbial communities and reduces N 2 O production potential

The concentration of nitrous oxide (N 2 O), an ozone-depleting greenhouse gas, is rapidly increasing in the atmosphere. Most atmospheric N 2 O originates in terrestrial ecosystems, of which the majority can be attributed to microbial cycling of nitrogen in agricultural soils. Here, in this study, we demonstrate how the abundance of nitrogen cycling genes vary across intensively managed agricultural fields and adjacent restored wetlands in the Sacramento-San Joaquin Delta in California, USA. We found that the abundances of nirS and nirK genes were highest at the intensively managed organic-rich cornfield and significantly outnumber any other gene abundances, suggesting very high N 2 O production potential. The quantity of nitrogen transforming genes, particularly those responsible for denitrification, nitrification and DNRA, were highest in the agricultural sites, whereas nitrogen fixation and ANAMMOX was strongly associated with the wetland sites. Although the abundance of nosZ genes was also high at the agricultural sites, the ratio of nosZ genes to nir genes was significantly higher in wetland sites indicating that these sites could act as a sink of N 2 O. These findings suggest that wetland restoration could be a promising natural climate solution not only for carbon sequestration but also for reduced N 2 O emissions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Linking Hydrology and Dissolved Organic Matter Characteristics in a Subtropical Wetland: A Long-Term Study of the Florida Everglades

Dissolved organic matter (DOM) acts as an important biogeochemical component of aquatic ecosystems that controls nutrient cycling, influences water quality, and links terrestrial and oceanic carbon pools, yet long-term studies of how changing environmental drivers alter its abundance and composition are rare. Using a ten-year, spatially explicit dataset from Everglades National Park (ENP), a globally significant wetland, we investigated the relationships between DOM quality/quantity and hydrologic/climatic drivers along two contrasting marsh-estuarine transects based on generalized linear modeling and a cumulative sums analysis. Analyses revealed distinct spatial, seasonal, and interannual patterns in variability of DOC and optical properties. Landscape-scale seasonal patterns showed an enrichment in microbial-like and protein-like DOM during the dry season relative to the wet season. We found that, while some compositional constituents varied with the solar calendar, responsive to temperature and photoperiod, others varied with the hydrologic calendar. Independent water level and discharge effects indicated strong hydrologic control on DOM quality that differed between the two transects, evidencing differences in their connectivity to areas of high agricultural activity. Across all sites, a significant long-term increasing trend in the fluorescence index was observed, associated with a positive correlation with precipitation and also potential changes in agricultural inputs, with other features associated with drought and hurricanes. Lastly, the cumulative sums analysis revealed differences between the two transects in the sensitivity of DOM composition to decreased water levels associated with 30-year climate scenarios, with the less hydrologically dynamic transect exhibiting greater potential sensitivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Strong Correspondence in Evapotranspiration and Carbon Dioxide Fluxes Between Different Eddy Covariance Systems Enables Quantification of Landscape Heterogeneity in Dryland Fluxes

Abstract The eddy covariance method is widely used to investigate fluxes of energy, water, and carbon dioxide at landscape scales, providing important information on how ecological systems function. Flux measurements quantify ecosystem responses to environmental perturbations and management strategies, including nature‐based climate‐change mitigation measures. However, due to the high cost of conventional instrumentation, most eddy covariance studies employ a single system, limiting spatial representation to the flux footprint. Insufficient replication may be limiting our understanding of ecosystem behavior. To address this limitation, we deployed eight lower‐cost eddy covariance systems in two clusters around two conventional eddy covariance systems in the Chihuahuan Desert of North America for a period of 2 years. These dryland settings characterized by large temperature variations and relatively low carbon dioxide fluxes represented a challenging setting for eddy covariance. We found very good closure of energy and water balance across all systems (within ±9% of unity). We found very good correspondence between the lower‐cost and conventional systems' fluxes of sensible heat (with concordance correlation coefficient (CCC) of ≥0.87), latent energy (evapotranspiration; CCC ≥ 0.89), and useful correspondence in the net ecosystem exchange ((NEE); with CCC ≥ 0.4) at the daily temporal resolution. Relative to the conventional systems, the low‐frequency systems were characterized by a higher level of random error, particularly in the NEE fluxes. Lower‐cost systems can enable wider deployment affording better replication and sampling of spatiotemporal variability at the expense of greater measurement noise that might be limiting for certain applications. Replicated eddy covariance observations may be useful when addressing gaps in the existing monitoring of critical and underrepresented ecosystems and for measuring areas larger than a single flux footprint.

54 ENVIRONMENTAL SCIENCES↗