Search NASA⌕ Search

SEARCH · Search NASA

Results for “channel coding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Sawtooth oscillations about helical current channels

An existing pseudospectral code for solving the three-dimensional equations of reduced magnetohydrodynamics is extended by adding a temperature equation. Resistivities and thermal conductivities are given their (isotropic) Braginskii temperature dependences, and are advanced self-consistently. Realistic-looking sawtooth oscillations are observed at modest Lundquist and Reynolds numbers. However, the oscillations are excited upon, and relax back to, a helical (rather than an axisymmetric) current channel.

Theobald, M. L.↗

New Short Constraint Length, Rate 1/N Convolutional Codes which Minimize Required E Sub B/n Sub o for Given Bit Error Rate

Instead of using the criterion of maximum free distance, (df) or the maximum (df) with minimizing a few first distance profiles, short constraint length rate 1/N convolution codes were searched using a criterion of minimizing required bit energy-to-noise density ratio, E(b)/N(o), for a given value of desired bit error rate (BER), for the goodness of a code. The considered channel was binary antipodal signaling over additive white Gaussian noise and no quantization at the channel output. For the BER calculations, the transfer function bounding technique was used. Partial searches were performed using some known facts and a very useful idea that "good codes generate good codes.'' That is, for a given constraint length K, good rate 1/(N + 1) codes can be found by extending the code generator matrices of good rate 1/N codes. The code search results are tabulated for 3 or = K or = 7 and 2 or = N or = 8. For many pairs of K and N, the new codes are shown to save 0.1 to 0.4 dB in the required E(b)/N(o) compared to previously reported codes. Additionally, the benefits of coding bandwidth expansion are confirmed with the new codes.

Lee, P. J.↗

Rocket-borne instrument with a high-resolution microchannel plate detector for planetary UV spectroscopy

A telescope-spectrograph employing a photon-counting microchannel plate (MCP)-CODACON detector has been built, tested, and flown on a sounding rocket. The detector uses a curved-channel MCP proximity focused onto a coded anode array of 1024 channels spaced 25.4-mm center to center. High quantum efficiency is obtained by depositing a cesium iodide photocathode on the front surface of the MCP. The instrument has obtained an ultraviolet spectrum of Jupiter with a spectral resolution of 8 A, which is higher than that of any previously reported observation in this wavelength range.

Mcclintock, W. E.↗

Effects of ISI and satellite channel nonlinearity on Viterbi demodulation/decoding

It is shown that, for convolutionally coded transmission over bandwidth-constrained channels, a mere reversal of the switching direction at the encoder output produces a change in the system bit error probability performance. This change is significant when the Viterbi demodulator/decoder is matched to the total channel memory and is more significant for linear channels than for nonlinear ones. The reversal of switching direction is a simple demonstration of the fact that the well-known optimum codes for the linear AGWN channel are no longer necessarily optimum for a bandwidth-constrained channel with or without the addition of channel nonlinearity. It is concluded that potentially significant performance improvement can be obtained by matching the encoder (through the appropriate choice of tap weights and modulo-2 summers) to the channel in addition to matching the demodulator/decoder to the channel for a given encoder.

Divsalar, D.↗

A B-ISDN-compatible modem/codec

Coded modulation techniques for development of a broadband integrated services digital network (B-ISDN)-compatible modem/codec are investigated. The selected baseband processor system must support transmission of 155.52 Mbit/s of data over an INTELSAT 72-MHz transponder. Performance objectives and fundamental system parameters, including channel symbol rate, code rate, and the modulation scheme are determined. From several candidate codes, a concatenated coding system consisting of a coded octal phase shift keying modulation as the inner code and a high rate Reed-Solomon as the outer code is selected and its bit error rate performance is analyzed by computer simulation. The hardware implementation of the decoder for the selected code is also described.

Hemmati, F.↗

Real-time combiner loss

Telemetry signals from several channels are aligned in time and combined by the Real-Time Combiner (RTC) in order to increase the strength of the total signal. In this article, the impact of the timing jitter in the RTC on the bit/symbol error rate is investigated. Equations are derived for the timing jitter loss associated with the coded and uncoded channels. Included are curves that depict the bit-symbol error rate vs. E sub b/N sub 0 and E sub s/N sub 0 for some typical telemetry conditions. The losses are typically below 0.1 dB.

Simon, M. K.↗

Generalized Multiple-Trellis-Coded Modulation

Generalized multiple-trellis-coded modulation technique combines multiple trellis coding (more than one channel symbol per trellis branch transmitted) with symmetrical M-ary phase-shift keying. Transmitter puts out k M-ary code symbols for every b input binary symbols. Throughout performances, b/k, of trellis-coded multiple-phase-shift-keying channels compared with computational cutoff rates, R0, of multiple-phase-shift keying. Performs better than conventional trellis-coded modulation technique, with no increase in complexity.

Divsalar, D.↗

The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel

Communication links from low orbiting spacecraft to a central ground station, via satellite repeater, may be susceptible to significant performance degradation if high-level, pulsed radio frequency interference (RFI) must be contended with. The present paper examines the coded bit error rate (BER) performance of a communication system in which BPSK modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics. A major result of this paper is an analytic method for determining soft decision statistics of the receiver demodulator output, in which pulsed RFI effects are accounted for. It is demonstrated that this result can be analytically applied to the approximate determination of the BER at the output of a Viterbi decoder, when convolutional coding is employed.

Weinberg, A.↗

LDPC Codes with Minimum Distance Proportional to Block Size

Low-density parity-check (LDPC) codes characterized by minimum Hamming distances proportional to block sizes have been demonstrated. Like the codes mentioned in the immediately preceding article, the present codes are error-correcting codes suitable for use in a variety of wireless data-communication systems that include noisy channels. The previously mentioned codes have low decoding thresholds and reasonably low error floors. However, the minimum Hamming distances of those codes do not grow linearly with code-block sizes. Codes that have this minimum-distance property exhibit very low error floors. Examples of such codes include regular LDPC codes with variable degrees of at least 3. Unfortunately, the decoding thresholds of regular LDPC codes are high. Hence, there is a need for LDPC codes characterized by both low decoding thresholds and, in order to obtain acceptably low error floors, minimum Hamming distances that are proportional to code-block sizes. The present codes were developed to satisfy this need. The minimum Hamming distances of the present codes have been shown, through consideration of ensemble-average weight enumerators, to be proportional to code block sizes. As in the cases of irregular ensembles, the properties of these codes are sensitive to the proportion of degree-2 variable nodes. A code having too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code having too many such nodes tends not to exhibit a minimum distance that is proportional to block size. Results of computational simulations have shown that the decoding thresholds of codes of the present type are lower than those of regular LDPC codes. Included in the simulations were a few examples from a family of codes characterized by rates ranging from low to high and by thresholds that adhere closely to their respective channel capacity thresholds; the simulation results from these examples showed that the codes in question have low error floors as well as low decoding thresholds. As an example, the illustration shows the protograph (which represents the blueprint for overall construction) of one proposed code family for code rates greater than or equal to 1.2. Any size LDPC code can be obtained by copying the protograph structure N times, then permuting the edges. The illustration also provides Field Programmable Gate Array (FPGA) hardware performance simulations for this code family. In addition, the illustration provides minimum signal-to-noise ratios (Eb/No) in decibels (decoding thresholds) to achieve zero error rates as the code block size goes to infinity for various code rates. In comparison with the codes mentioned in the preceding article, these codes have slightly higher decoding thresholds.

Divsalar, Dariush↗

A calculation procedure for viscous flow in turbomachines, volume 1

A method for analyzing the nonadiabatic viscous flow through turbomachine rotors is presented. The field analysis is based upon the numerical integration of the full incompressible stream function vorticity form of the Navier-Stokes equations, together with the energy equation, over the rotor blade-to-blade stream channels. The numerical code used to solve the governing equations employs a nonorthogonal boundary fitted coordinate system that suits the most complicated blade geometries. A numerical scheme is used to carry out the necessary integration of the elliptic governing equations. The flow characteristics within the rotor of a radial inflow turbine are investigated over a wide range of operating conditions. The calculated results are compared to existing experimental data. The flow in a radial compressor is analyzed in order to study the behavior of viscous flow in diffusing cascades. The results are compared qualitatively to known experimental trends. The solution obtained provides insight into the flow phenomena in this type of turbomachine. It is concluded that the method of analysis is quite general and gives a good representation of the actual flow behavior within turbomachine passages.

Khalil, I.↗

A study of the viscous and nonadiabatic flow in radial turbines

A method for analyzing the viscous nonadiabatic flow within turbomachine rotors is presented. The field analysis is based upon the numerical integration of the incompressible Navier-Stokes equations together with the energy equation over the rotors blade-to-blade stream channels. The numerical code used to solve the governing equations employs a nonorthogonal boundary fitted coordinate system that suits the most complicated blade geometries. Effects of turbulence are modeled with two equations; one expressing the development of the turbulence kinetic energy and the other its dissipation rate. The method of analysis is applied to a radial inflow turbine. The solution obtained indicates the severity of the complex interaction mechanism that occurs between different flow regimes (i.e., boundary layers, recirculating eddies, separation zones, etc.). Comparison with nonviscous flow solutions tend to justify strongly the inadequacy of using the latter with standard boundary layer techniques to obtain viscous flow details within turbomachine rotors. Capabilities and limitations of the present method of analysis are discussed.

Khalil, I.↗

Error control techniques for satellite and space communications

During the period December 1, 1987 through May 31, 1988, progress was made in the following areas: construction of Multi-Dimensional Bandwidth Efficient Trellis Codes with MPSK modulation; performance analysis of Bandwidth Efficient Trellis Coded Modulation schemes; and performance analysis of Bandwidth Efficient Trellis Codes on Fading Channels.

Costello, Daniel J., Jr.↗

Proceedings of the Mobile Satellite Conference

A satellite-based mobile communications system provides voice and data communications to mobile users over a vast geographic area. The technical and service characteristics of mobile satellite systems (MSSs) are presented and form an in-depth view of the current MSS status at the system and subsystem levels. Major emphasis is placed on developments, current and future, in the following critical MSS technology areas: vehicle antennas, networking, modulation and coding, speech compression, channel characterization, space segment technology and MSS experiments. Also, the mobile satellite communications needs of government agencies are addressed, as is the MSS potential to fulfill them.

Rafferty, William↗

Simulation of the Australian Mobilesat signalling scheme

The proposed Australian Mobilesat system will provide a range of circuit switched voice/data services using the B-series satellites. The reliability of the signalling scheme between the Network Management Station (NMS) and the mobile terminal (MT) is of critical importance to the performance of the overall system. Simulation results of the performance of the signalling scheme under various channel conditions and coding schemes are presented.

Rahman, Mushfiqur↗

Error control techniques for satellite and space communications

This report focuses on the results obtained during the PI's recent sabbatical leave at the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, from January 1, 1995 through June 30, 1995. Two projects investigated various properties of TURBO codes, a new form of concatenated coding that achieves near channel capacity performance at moderate bit error rates. The performance of TURBO codes is explained in terms of the code's distance spectrum. These results explain both the near capacity performance of the TURBO codes and the observed 'error floor' for moderate and high signal-to-noise ratios (SNR's). A semester project, entitled 'The Realization of the Turbo-Coding System,' involved a thorough simulation study of the performance of TURBO codes and verified the results claimed by previous authors. A copy of the final report for this project is included as Appendix A. A diploma project, entitled 'On the Free Distance of Turbo Codes and Related Product Codes,' includes an analysis of TURBO codes and an explanation for their remarkable performance. A copy of the final report for this project is included as Appendix B.

Costello, Daniel J., Jr.↗

Comparison of High Aspect Ratio Cooling Channel Designs for a Rocket Combustion Chamber

An analytical investigation on the effect of high aspect ratio (height/width) cooling channels, considering different coolant channel designs, on hot-gas-side wall temperature and coolant pressure drop for a liquid hydrogen cooled rocket combustion chamber, was performed. Coolant channel design elements considered were: length of combustion chamber in which high aspect ratio cooling was applied, number of coolant channels, and coolant channel shape. Seven coolant channel designs were investigated using a coupling of the Rocket Thermal Evaluation code and the Two-Dimensional Kinetics code. Initially, each coolant channel design was developed, without consideration for fabrication, to reduce the hot-gas-side wall temperature from a given conventional cooling channel baseline. These designs produced hot-gas-side wall temperature reductions up to 22 percent, with coolant pressure drop increases as low as 7.5 percent from the baseline. Fabrication constraints for milled channels were applied to the seven designs. These produced hot-gas-side wall temperature reductions of up to 20 percent, with coolant pressure drop increases as low as 2 percent. Using high aspect ratio cooling channels for the entire length of the combustion chamber had no additional benefit on hot-gas-side wall temperature over using high aspect ratio cooling channels only in the throat region, but increased coolant pressure drop 33 percent. Independent of coolant channel shape, high aspect ratio cooling was able to reduce the hot-gas-side wall temperature by at least 8 percent, with as low as a 2 percent increase in coolant pressure drop. The design with the highest overall benefit to hot-gas-side wall temperature and minimal coolant pressure drop cooling can now be done in relatively short periods of time with multiple iterations.

Wadel, Mary F.↗