Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tailoring Carbide Dispersed Steels: A Path to Increased Strength and Hydrogen Tolerance

The use of transition metal carbides is reported for use as a hydrogen trapping mechanism for ferritic and austenitic steel materials. The program combined computational modeling and simulations to guide experiments towards candidate metal carbide traps, both for interfacial and interior trapping. It was found that interfacial trapping is less effective than interior trapping, with the group IVB transition metal carbides being the most effect internal traps with a loss of carbon. The sub-stoichiometric rocksalt structure accommodate the hydrogen atoms in its octahedral interstices. Using percolation theory, carbon loss of approximately 25% or more was sufficient to ensure an interconnected network of vacancies for such trapping from the surface to the internal sites within the carbide. Using this as a guide, the program developed a means to provide a uniform dispersion of ZrC nanoparticles with either Fe or 304L micron-scale powders which was then consolidated by direct current sintering. Electrolytic hydrogen diffusivity studies confirmed the reduction of hydrogen diffusion in the matrix with increasing ZrC content, which was a linear response over the sample range studied (0.01 to 1.0 wt.%). The consolidated material was micro-tensile tested in either a non-hydrogen or hydrogen charge condition and compared to a control with no carbides. Additions up to 0.05 wt.% ZrC increased the yield strength with no loss in ductility in either the non-hydrogen or hydrogen tested condition. ZrC concentrations above this amount further increased the yield strength at the expense of ductility. While these samples had a lower absolute ductility value prior to failure, the relative change in ductility between the non-hydrogen and hydrogen charge states was less for the carbides than that of the control. Metal-rich ZrC nanoparticles were fabricated through a conformal coating process yielding ZrC0.66 particles that were then incorporated into a metal matrix. Notch fatigue testing in a hydrogen environment was conducted where the number of cycles to failure was found to be less in the control than that of the carbide addition. However, the spread in experimental data and the number of samples tested limits a conclusive outcome based on defects noticed in the gauge section of all the powder processed samples. The collective outcomes of this report provide further insight into the mechanisms by which carbides act as hydrogen traps; a means to process such carbides through powder metallurgy; and their associated mechanical performance in either a non-hydrogen or hydrogen-charged condition.

08 HYDROGEN↗
DOE OSTI2024

Transient Chemo‐Mechanical Model of Lithium Plating Impacted by External Pressure

Abstract Lithium anodes show great promise in commercial applications, but are hindered by lithium plating and dendrite growth which cause safety concerns during long‐term cell operation. Stack pressure is experimentally observed to improve cell lifetime; however, the relationship between stress and lithium deposition has remained difficult to elucidate. In this work, a transient, 3D, finite‐element model of the evolution of a lithium anode due to stripping and plating is developed. The evolution of a microscale protrusion on the anode surface is tracked over one charge‐discharge cycle with respect to stack pressure and lithium yield strength. Lithium plastic deformation, nonconformal anode‐separator contact, and separator porosity effects are accounted for. Over the course of several hours of stripping/plating, the anode surface evolves to a similar morphology under pressure regardless of the initial conditions due to lithium plastic deformation and hardening. The rate of this evolution highly depends on the applied pressure and assumed lithium yield strength.

25 ENERGY STORAGE↗
DOE OSTI2023

Probing the chiral magnetic wave with charge-dependent flow measurements in Pb-Pb collisions at the LHC

The Chiral Magnetic Wave (CMW) phenomenon is essential to provide insights into the strong interaction in QCD, the properties of the quark-gluon plasma, and the topological characteristics of the early universe, offering a deeper understanding of fundamental physics in high-energy collisions. Measurements of the charge-dependent anisotropic flow coefficients are studied in Pb-Pb collisions at center-of-mass energy per nucleon-nucleon collision $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV to probe the CMW. In particular, the slope of the normalized difference in elliptic (v 2 ) and triangular (v 3 ) flow coefficients of positively and negatively charged particles as a function of their event-wise normalized number difference, is reported for inclusive and identified particles. The slope ${r}_3^{\textrm{Norm}}$ is found to be larger than zero and to have a magnitude similar to ${r}_2^{\textrm{Norm}}$, thus pointing to a large background contribution for these measurements. Furthermore, ${r}_2^{\textrm{Norm}}$ can be described by a blast wave model calculation that incorporates local charge conservation. In addition, using the event shape engineering technique yields a fraction of CMW (f CMW ) contribution to this measurement which is compatible with zero. This measurement provides the very first upper limit for f CMW , and in the 10–60% centrality interval it is found to be 26% (38%) at 95% (99.7%) confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Unraveling capacity fading in lithium-ion batteries using advanced cyclic tests: A real-world approach

Battery lifespan estimation is essential for effective battery management systems, aiding users and manufacturers in strategic planning. However, accurately estimating battery capacity is complex, owing to diverse capacity fading phenomena tied to factors such as temperature, charge-discharge rate, and rest period duration. In this work, we present an innovative approach that integrates real-world driving behaviors into cyclic testing. Unlike conventional methods that lack rest periods and involve fixed charge-discharge rates, our approach involves 1000 unique test cycles tailored to specific objectives and applications, capturing the nuanced effects of temperature, charge-discharge rate, and rest duration on capacity fading. This yields comprehensive insights into cell-level battery degradation, unveiling growth patterns of the solid electrolyte interface (SEI) layer and lithium plating, influenced by cyclic test parameters. Here, the results yield critical empirical relations for evaluating capacity fading under specific testing conditions.

25 ENERGY STORAGE↗
DOE OSTI2024

Laboratory realization of relativistic pair-plasma beams

Relativistic electron-positron plasmas are ubiquitous in extreme astrophysical environments such as black-hole and neutron-star magnetospheres, where accretion-powered jets and pulsar winds are expected to be enriched with electron-positron pairs. Their role in the dynamics of such environments is in many cases believed to be fundamental, but their behavior differs significantly from typical electron-ion plasmas due to the matter-antimatter symmetry of the charged components. So far, our experimental inability to produce large yields of positrons in quasi-neutral beams has restricted the understanding of electron-positron pair plasmas to simple numerical and analytical studies, which are rather limited. We present the first experimental results confirming the generation of high-density, quasi-neutral, relativistic electron-positron pair beams using the 440 GeV/c beam at CERN’s Super Proton Synchrotron (SPS) accelerator. Monte Carlo simulations agree well with the experimental data and show that the characteristic scales necessary for collective plasma behavior, such as the Debye length and the collisionless skin depth, are exceeded by the measured size of the produced pair beams. Our work opens up the possibility of directly probing the microphysics of pair plasmas beyond quasi-linear evolution into regimes that are challenging to simulate or measure via astronomical observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Accelerating defect predictions in semiconductors using graph neural networks

First-principles computations reliably predict the energetics of point defects in semiconductors but are constrained by the expense of using large supercells and advanced levels of theory. Machine learning models trained on computational data, especially ones that sufficiently encode defect coordination environments, can be used to accelerate defect predictions. Here, we develop a framework for the prediction and screening of native defects and functional impurities in a chemical space of group IV, III–V, and II–VI zinc blende semiconductors, powered by crystal Graph-based Neural Networks (GNNs) trained on high-throughput density functional theory (DFT) data. Using an innovative approach of sampling partially optimized defect configurations from DFT calculations, we generate one of the largest computational defect datasets to date, containing many types of vacancies, self-interstitials, anti-site substitutions, impurity interstitials and substitutions, as well as some defect complexes. We applied three types of established GNN techniques, namely crystal graph convolutional neural network, materials graph network, and Atomistic Line Graph Neural Network (ALIGNN), to rigorously train models for predicting defect formation energy (DFE) in multiple charge states and chemical potential conditions. We find that ALIGNN yields the best DFE predictions with root mean square errors around 0.3 eV, which represents a prediction accuracy of 98% given the range of values within the dataset, improving significantly on the state-of-the-art. We further show that GNN-based defective structure optimization can take us close to DFT-optimized geometries at a fraction of the cost of full DFT. The current models are based on the semi-local generalized gradient approximation-Perdew–Burke–Ernzerhof (PBE) functional but are highly promising because of the correlation of computed energetics and defect levels with higher levels of theory and experimental data, the accuracy and necessity of discovering novel metastable and low energy defect structures at the PBE level of theory before advanced methods could be applied, and the ability to train multi-fidelity models in the future with new data from non-local functionals. The DFT-GNN models enable prediction and screening across thousands of hypothetical defects based on both unoptimized and partially optimized defective structures, helping identify electronically active defects in technologically important semiconductors.

Rahman, Md Habibur (ORCID:000000027705984X)↗
DOE OSTI2025

Disentangling Centrality Bias and Final-State Effects in the Production of High-𝑝 𝑇 Neutral Pions Using Direct Photon in 𝑑+Au Collisions at $\sqrt{s_{NN}}$ = 200 GeV

Here, PHENIX presents a simultaneous measurement of the production of direct 𝛾 and 𝜋 0 in 𝑑 + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV over a 𝑝 𝑇 range of 7.5 to 18 GeV/𝑐 for different event samples selected by event activity, i.e., charged-particle multiplicity detected at forward rapidity. Direct-photon yields are used to empirically estimate the contribution of hard-scattering processes in the different event samples. Using this estimate, the average nuclear-modification factor, 𝑅$^{𝜋^0}_{dAu,EXP}$, is 0.925 ± 0.023⁢(stat) ± 0.15⁢(scale), consistent with unity for minimum-bias (MB) 𝑑+Au collisions. For event classes with low and moderate event activity, 𝑅$^{𝜋^0}_{dAu,EXP}$ is consistent with the MB value within 5% uncertainty. This result confirms that the previously observed enhancement of high-𝑝 𝑇 𝜋 0 production found in small-system collisions with low event activity is a result of a bias in interpreting event activity within the Glauber framework. In contrast, for the top 5% of events with the highest event activity, 𝑅$^{𝜋^0}_{dAu,EXP}$ is suppressed by 20% relative to the MB value with a significance of 4.5⁢𝜎, which may be due to final-state effects. This suppression corresponds to a 𝑝 𝑇 shift of 𝛿⁢𝑝 𝑇 = 0.213 ± 0.055 Gev/𝑐 at 9 Gev/𝑐.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Signatures of QCD conductivities in heavy-ion collisions

Dissipative processes are pivotal for understanding the hydrodynamic evolution of hot and dense quantum chromodynamics (QCD) matter created in relativistic nuclear collisions. The interplay of multiple conserved charges—net baryon, strangeness, and electric charge—is of particular interest. Here, we simulate the longitudinal hydrodynamic evolution with the three diffusion currents in a hydrodynamic model with a lattice-QCD-based equation of state, NEOS -4 D , and estimate rapidity distributions including diffusive corrections to the phase-space distribution in the presence of multiple charges, which ensure charge conservation at particlization. We determine the response of particle yields at midrapidity to changes in the diagonal and off-diagonal conductivities. Inversely, we find that most components of the conductivity matrix can be constrained experimentally using identified particle multiplicities at different collision energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Calibration and Performance of the ICARUS Detector at Fermilab

ICARUS is the largest Liquid Argon Time Projection Chamber (LArTPC) in operation and serves as the Far Detector of the Short Baseline Neutrino (SBN) program at Fermilab. Precise detector calibration is essential for reliable energy reconstruction and for maximizing the physics reach of the experiment. In this talk, I will describe the energy and timing calibration procedures developed at ICARUS. Thanks to the abundant flux of cosmic ray muons at the surface, the TPC response to ionization charge has been equalized across the detector, removing non-uniformities and in-transparency effects. A novel data-driven procedure has been used to tune the simulation of ionization signals and electronics noise yielding close agreement between Monte Carlo and data with minimal residual bias in reconstructed charge. In addition, the light detection system has been calibrated to sub-nanosecond timing resolution. This precision enables efficient cosmic background rejection and accurate synchronization of neutrino interactions with the time structure of both the Booster Neutrino Beam (BNB) and Neutrinos at the Main Injector (NuMI) beam. Together, these efforts demonstrate the robust performance of the detector and provide critical experience for future large LArTPCs, such as DUNE.

Vicenzi, Matteo [Brookhaven]↗
DOE OSTI2026

Rigid-Mode Limit of the Yokoya Matrix Formalism and the Burov-Lebedev Dispersion Equation

Transverse single-bunch instabilities of space-charge-dominated coasting beams with round and flat transverse geometries are studied using a unified dispersion-relation framework. The analysis combines the Burov-Lebedev formalism, which captures space-charge tune spread, Landau damping, and instability threshold behavior, with Yokoya’s projection method for representing coherent transverse mode structure and its dependence on beam aspect ratio. In the rigid-beam limit, the formulation reduces to a scalar dispersion relation of Burov-Lebedev paper. For non-rigid transverse oscillations, truncation of Yokoya’s Hermite-based expansion yields a finite-dimensional matrix eigenvalue problem in which space-charge and coupling impedance effects enter through Burov-Lebedev–type denominators. This approach provides a consistent basis for comparing rigid and non-rigid instability behavior in round and flat beams and for assessing the role of beam ellipticity in modifying coherent mode structure and stability thresholds.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

TinyTPC - A Test Stand for Photosensitive Dopants

Liquid argon time projection chambers (LArTPCs) are widely used to study accelerator neutrinos. Since LArTPCs are sensitive down to 10– 100 keV, neutrino experiments' physics programs could be extended to lower energies. However, in this scale, LArTPCs' energy resolution is significantly degraded because only charge is collected efficiently. One solution is the introduction of photosensitive dopants, which convert scintillation light to ionization yield. We have built a test stand (TinyTPC) with a LArPix pixelated anode plane and an active mass of 2.1 kg to study these charge enhancements. Our plan is to measure TinyTPC’s energy resolution with and without dopants using radioactive sources. This poster presentation will discuss TinyTPC's status and goals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A disordered rock salt anode for fast-charging lithium-ion batteries

Rechargeable lithium-ion batteries with high energy density that can be safely charged and discharged at high rates are desirable for electrified transportation and other applications. However, the sub-optimal intercalation potentials of current anodes result in a trade-off between energy density, power and safety. In this paper we report that disordered rock salt Li 3+ x V 2 O 5 can be used as a fast-charging anode that can reversibly cycle two lithium ions at an average voltage of about 0.6 volts versus a Li/Li + reference electrode. The increased potential compared to graphite reduces the likelihood of lithium metal plating if proper charging controls are used, alleviating a major safety concern (short-circuiting related to Li dendrite growth). In addition, a lithium-ion battery with a disordered rock salt Li 3 V 2 O 5 anode yields a cell voltage much higher than does a battery using a commercial fast-charging lithium titanate anode or other intercalation anode candidates (Li 3 VO 4 and LiV 0.5 Ti 0.5 S 2 ). Further, disordered rock salt Li 3 V 2 O 5 can perform over 1,000 charge–discharge cycles with negligible capacity decay and exhibits exceptional rate capability, delivering over 40 per cent of its capacity in 20 seconds. We attribute the low voltage and high rate capability of disordered rock salt Li 3 V 2 O 5 to a redistributive lithium intercalation mechanism with low energy barriers revealed via ab initio calculations. This low-potential, high-rate intercalation reaction can be used to identify other metal oxide anodes for fast-charging, long-life lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Time-resolved measurement of neutron energy isotropy in a sheared-flow-stabilized Z pinch

Previous measurements of neutron energy using fast plastic scintillators while operating the Fusion Z Pinch Experiment (FuZE) constrained the energy of any yield-producing deuteron beams to less than 4.65 keV. FuZE has since been operated at increasingly higher input power, resulting in increased plasma current and larger fusion neutron yields. A detailed experimental study of the neutron energy isotropy in these regimes applies more stringent limits to possible contributions from beam-target fusion. The FuZE device operated at -25 kV charge voltage has resulted in average plasma currents of 370 kA and D–D fusion neutron yields of $4\times10^7 \pm 4\times10^6$ neutrons per discharge. Measurements of the neutron energy isotropy under these operating conditions demonstrates the energy of deuteron beams is less than $7.4 \pm 5.6^\mathrm{(stat)} \pm 3.7^\mathrm{(syst)}$ keV. Characterization of the detector response has reduced the number of free parameters in the fit of the neutron energy distribution, improving the confidence in the forward-fit method. Gamma backgrounds have been measured and the impact of these contributions on the isotropy results have been studied. Additionally, a time dependent measurement of the isotropy has been resolved for the first time, indicating increases to possible deuteron beam energies at late times. This suggests the possible growth of m = 0 instabilities at the end of the main radiation event but confirms that the majority of the neutron production exhibits isotropy consistent with thermonuclear origin.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts

Colloidal organic nanoparticles have proven to be a promising class of photocatalyst for performing the Hydrogen Evolution Reaction (HER) due to their dispersibility in aqueous environments, their strong absorption within the visible region, and the tunabilty of their component materials' redox potentials. Currently, there is little understanding of how charge generation and accumulation in organic semiconductors change when these materials are formed into nanoparticles that share a high interfacial area with water, nor is it known what mechanism limits the hydrogen evolution efficiency in recent reports on organic nanoparticle photocatalysts. Herein, we use Time-Resolved Microwave Conductivity to study aqueous-soluble organic nanoparticles and bulk thin films composed of various blend ratios of the non-fullerene acceptor EH-IDTBR and conjugated polymer PTB7-Th and examine the relationship between composition, interfacial surface area, charge carrier dynamics, and photocatalytic activity. We quantitatively measure the rate of Hydrogen Evolution Reaction by nanoparticles composed of various donor:acceptor blend ratio compositions and find that the most active blend ratio displays a Hydrogen Quantum Yield of 0.83% per photon. Moreover, we find that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3x more long-lived accumulated charges relative to bulk samples of the same material composition. Here these results suggest that, under our current reaction conditions, with approximately 3x solar flux, catalytic activity by these nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface cites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

08 HYDROGEN↗
DOE OSTI2024

Predicting Partial Atomic Charges in Metal–Organic Frameworks: An Extension to Ionic MOFs

Molecular simulation is an invaluable tool to predict and understand the usage of metal–organic frameworks (MOFs) for gas storage and separation applications. Accurate partial atomic charges, commonly obtained from density functional theory (DFT) calculations, are often required to model the electrostatic interactions between the MOF and adsorbates, especially when the adsorbates have dipole or quadrupole moments, such as water and CO 2 . Machine learning (ML) models have been previously employed to predict partial charges and avoid the computational cost associated with DFT calculations. However, previous ML models suffer from small training data sets, which limit their scope of application. In this work, we introduce two novel machine learning models, PACMOF2-neutral and PACMOF2-ionic, aimed at predicting the density-derived electrostatic and chemical (DDEC6) partial atomic charges for both neutral and ionic MOFs. These models not only yield DFT-level accuracy at a fraction of the computational cost but also demonstrate a remarkable improvement in prediction of adsorption, as validated with grand canonical Monte Carlo simulations. Furthermore, the robustness and fast computational time of the PACMOF2 models, along with their transferability to other porous materials such as covalent organic frameworks and zeolites, underscores their potential in high-throughput screening of MOFs for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Auger Recombination Lifetime Scaling for Type I and Quasi-Type II Core/Shell Quantum Dots

Having already achieved near-unity quantum yields, with promising properties for light-emitting diode, lasing, and charge separation applications, colloidal core/shell quantum dots have great technological potential. The shell thickness and band alignment of the shell and core materials are known to influence the efficiency of these devices. In many such applications, improving the efficiency requires a deep understanding of multiexcitonic states. In this paper, we elucidate the shell thickness and band alignment dependencies of the biexciton Auger recombination lifetime for quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots. We find that the biexciton Auger recombination lifetime increases with the total nanocrystal volume for quasi-type II CdSe/CdS core/shell quantum dots and is independent of the shell thickness for type I CdSe/ZnS core/shell quantum dots. To perform these calculations and compute Auger recombination lifetimes, we developed a low-scaling approach based on the stochastic resolution of identity. The numerical approach provided a framework for studying the scaling of the biexciton Auger recombination lifetimes in terms of the shell thickness dependencies of the exciton radii, Coulomb couplings, and density of final states in quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Overcoming efficiency and cost barriers for large-area quantum dot photovoltaics through stable ink engineering

The bottom-up construction of electronics from colloidal quantum dots (CQDs) could innovate nanotechnology manufacturing through printing. However, the unstable and expensive semiconductive CQD inks make the scaling up of CQD electronics challenging. Here, in this study, we develop a strategy for engineering the solution chemistry of lead sulfide (PbS) CQD inks prepared from a low-cost direct synthesis method. By creating an iodine-rich environment in weakly coordinating solvents, we convert the iodoplumbates into functional anions, which condense into a robust surface shell. The fully charged electrostatic surface layer prevents aggregation and epitaxial fusion of CQDs, yielding stable inks. By eliminating the fusion-induced inter-band states, we print a compact CQD film with uniformity in three dimensions, flattened energy landscape and improved carrier transport. We achieved a certified efficiency of 13.40% on 0.04 cm 2 cells, with a 300-fold increase in active area, scaling up to a 12.60 cm 2 module with a certified efficiency of 10%.

14 SOLAR ENERGY↗
DOE OSTI2021

Extracellular electron transfer across bio-nano interfaces for CO 2 electroreduction

Acetogenic bacteria represent a class of organisms capable of converting reducing equivalents and carbon dioxide into products with carbon–carbon bonds. Materials-based bio-electrochemical approaches are attractive for supplying biological organisms directly with grid-supplied electrons to convert carbon dioxide to value-added chemicals. Carbon nanotube-modified biocathodes have emerged as promising candidates for microbial electrosynthesis with high yields of carbon product formation, but a fundamental understanding of extracellular charge transfer at this electrode-biofilm interface is still lacking. Here, we utilize solid-state interfaces between semiconducting single-walled carbon nanotubes (s-SWCNT) and a model acetogenic bacterium for mechanistic studies of electro-catalytic CO 2 conversion to acetate. Studies of bacteria/s-SWCNT interactions in a transistor-based device suggest direct extracellular electron transfer (EET) at the bio-nano interface. Deuterium isotope labeling experiments confirmed that the availability of electrochemically produced H 2 as a redox mediator does not limit the efficiency of EET and CO 2 electro-reduction for C. ljungdahlii biofilms, suggesting the primary reducing equivalents are the electrons delivered across the electrode/bacterium interface or involvement of biological redox mediators. Additional isotope labeling studies demonstrate high Faradaic efficiency for CO 2 electro-reduction at the SWCNT/bacterium interface. These results provide important information about EET across the bacterium/material interface in a model biocathode.

77 NANOSCIENCE AND NANOTECHNOLOGY↗