Search NASA⌕ Search

SEARCH · Search NASA

Results for “cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Modeling and simulation of hydrogen behavior in Zircaloy-4 fuel cladding

As a result of corrosion during normal operation in nuclear reactors, hydrogen can enter the zirconium-alloy fuel cladding and precipitate as brittle hydride platelets, which can severely degrade the cladding ductility. Under a heterogeneous temperature distribution, hydrides tend to accumulate in the colder areas, creating local spots of degraded cladding that can favor crack initiation. Therefore, an estimation of the local hydride distribution is necessary to help predict the risk of cladding failure. The hydride distribution is governed by three competing phenomena. Hydrogen in solid solution diffuses under a concentration gradient due to Fick’s law and under a temperature gradient due to the Soret effect. Precipitation of the hydride platelets occurs once the hydrogen solubility limit is reached. A model of these phenomena was implemented in the 3D fuel performance code BISON in order to calculate the hydrogen distribution for arbitrary geometries, such as a nuclear fuel rod, and is now available for BISON users. Simulations have been performed on simple geometries to validate the model and its implementation. The simulations predict that before precipitation occurs, hydrogen tends to accumulate in the colder spots due to the Soret effect. Once the solubility limit is reached, hydrogen precipitates and forms a rim close to the outer edge of the cladding. The simulations also predict that the reactor shut down has little effect on already precipitated hydrides but causes the remaining hydrogen to precipitate homogeneously into hydrides.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reduced Diameter and Lined Cladding Production Status

A contract has been placed with Century Tube Inc. to produce cladding for the FAST experiment. Excess EBR II cladding tubes will be cold drawn down to 0.115 in. diameter × 0.009 in. wall and 0.077 in. × 0.006 in. wall. Lined cladding will also be tested in the FAST experiment. Century Tube will produce several samples, varying assembly the assembly process, with solid zirconium or vanadium rods inside of the HT9. Cladding/liner bonding of each will be evaluated using microscopy. The best one will be further processed to form a liner tube within the cladding. A shrink fit approach is also being developed, where a solid zirconium or vanadium bar is shrunk fit into a cladding piece. This process has shown favorable results and will be compared against the co drawn samples when available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic System Scaling Applied to Zr-4 Cladding under RIA Conditions

The research and development lifecycle for new fuel designs currently has an ideal 20-25 year timeline. Efforts are currrently underway to accelerate fuel design and development using high performance fuel modeling codes and reduced scale experiments with new instrumentation techniques. However current tools available require a full scale prototype to be designed and tested for fuel qualification. The thermal-hydraulics community has leveraged scaling methodologies to use reduced scale integral effect test facilities (Westinghouse AP600/1000, NuScale Power Module) in lieu of building full scale prototypes for reactor design certification. Dynamic System Scaling (DSS) is a recent development to scaling methodologies that enable the tracking and quantification of dynamic scaling distortions experienced throughout a transient. Recent TREAT experiments performed reactivity initiated accident (RIA) pulses on UO2 fuel rodlets in Zr-4 cladding and were accompanied by BISON predictions for the cladding temperature. DSS is applied to pyrometer data of outer cladding temperatures and two BISON predictions after peak cladding temperature has been reached. One BISON case uses a constant gap conductance value between the fuel and cladding and the other using a conventional gap conductance model. Results from the DSS analysis show that there is good agreement between both BISON predictions and the experimental data and that there is not a significant distortion seen between using either gap conductance model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An improved model for pellet-clad interaction for FRAPCON

The widely used fuel performance code FRAPCON-3 currently makes use of the rigid pellet model for Pellet-Cladding Mechanical Interactions (PCMI). Due to the potential of PCMI to limit fuel lifetime at higher burnups, the FRAPCON Radial-Axial Soft Pellet (FRASP) model is being developed for implementation into an improved version of FRAPCON, the FRAPCON-EP for Enhanced Performance. FRASP solves for the radial, hoop, and axial components of stress and strain for the fuel and cladding, including both elastic and inelastic behavior, in a quasi-static approach. Under PCMI conditions, FRASP couples the axial and radial states of the fuel and cladding via interfacial pressure and friction. Unlike the hard pellet model employed in FRACAS-I, the mechanical model used by FRAPCON-3, FRASP does allow for the stress-induced deformation of the fuel pellet. It also accounts for the radial distribution of stress and strain components through the cladding thickness. FRASP has been implemented into FRAPCON-3 and preliminarily validated against FRAPCON-3.3 for one PWR case and one BWR case with good results. The predicted fuel and cladding strains only slightly different with the new model, generally reducing the dimensional changes of the fuel pellets. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fuel cladding post-quench LOCA embrittlement: mechanical test relevance

During a loss-of-coolant-accident (LOCA), the fuel cladding is submitted to a high temperature increase in a steam environment, along with an internal pressure increase which would eventually lead to ballooning and burst of the cladding. Steam could then penetrate through the burst opening and lead to inner surface oxidation and secondary-hydriding of the cladding. Post-quench cladding rupture can then occur either in two-sided oxidized area with wall thinning due to ballooning, or in single-sided oxidized area with large hydrogen content. Common tests involved in the evaluation of the post-quench ductility are Ring Compression Tests (RCT), Expansion Due to Compression Test (EDC) or Axial Tensile Tests (AT). Questions arise about these mechanical tests, as for instance, the influence on sample failure of the oxide layer thickness partitioning between inner and outer diameter. A systematic study was carried out to compare several mechanical tests on both single-sided and two-sided Zircaloy-4 oxidized samples. Five different mechanical tests were compared, including RCT: C-shaped ring Compression Test (CCT), Axial Tensile test (AT), Ring Tensile Test with well-defined machined gage section (RTT) and plain Ring Tensile Test (pRTT). All samples were taken from cladding tubes which had been oxidized in steam at 1200 Celsius degrees and then water-quenched. Mechanical tests were performed at room temperature and two to three samples were tested for each oxidation conditions and for every sample geometry to assess the reproducibility. Metallographic examinations were carried out to measure the ZrO{sub 2} and αZr(O) layer thicknesses and the ex-β/α(O) phase fraction. Mean hydrogen content measurements were also performed systematically on each sample. Results indicate that the different mechanical tests have not the same sensitivity to the oxide layer partitioning: RTT and pRTT load at failure seems to depend mainly on the cumulated oxide layer thickness rather than on its partitioning, whereas this parameter has an impact on CCT and AT test results. For all tensile tests, stresses at failure were derived from load-displacement curves. The failure of brittle samples was assumed to be governed by linear elastic fracture mechanics. Using conventional stress intensity factor solution, a value of the material fracture toughness controlling the sample failure was determined from experimental results and discussed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Post quench ductility of Zirconium alloy cladding materials - 6.2 STP-2016-0088

The ductility of zirconium-based alloys after steam oxidation at high temperature, followed by quenching in water, is of significant interest for the nuclear industry. High temperature steam oxidation and quenching of nuclear fuel cladding occurs during postulated loss-of-coolant accidents (LOCA). The industry is currently establishing in-reactor operation limits for peak cladding temperature and time at temperature based on the measured ductile-to-brittle transition of different cladding materials, both in the as-fabricated condition and using hydrogen charging as a surrogate for in-reactor operation. Aiming to study possible differences in post-quench ductility (PQD) caused by differences in chemical composition, extensive testing has been performed on Zircaloy-4, ZIRLO{sup R} and Optimized ZIRLO{sup TM} cladding materials as a function of hydrogen content, extent of oxidation and peak cladding temperature. The results show similar ductile-to-brittle transition for the alloys studied, in spite of the differences in chemical composition, with a decrease in the extent of oxidation to reach the ductile-to-brittle transition with increasing hydrogen content. Microstructural characterization was performed to investigate the evolution of the oxygen enriched layer that appears underneath the oxide, both during the time at high temperature and during cooling. Significantly different morphologies of the oxygen enriched layer are observed with different cooling rates, particularly for alloys containing niobium. Possible mechanisms for the development of the oxygen enriched layer are discussed (authors)

36 MATERIALS SCIENCE↗

High temperature secondary hydriding experiments with E110 and E110g claddings - 6.5 STP-2016-0031

Secondary hydriding can take place during a LOCA (loss of coolant accident) event after the ballooning and burst of Zr cladding. The oxidation and hydrogen uptake in the ballooned section can produce the weakest segment of the rod. This phenomenon was investigated in the past mainly for Zircaloy-4 cladding. The objective of the present work was the investigation of the effect of secondary hydriding in VVER reactors with E110 and E110G alloys. High temperature facility was built to carry out high temperature treatment of fuel cladding samples. The burst of tubes was reached with inner pressurization at 750 deg. C and 800 deg. C. After burst the samples were oxidized in the same furnace for different periods and at different temperatures. The oxidized samples were tested in tensile test machine with four point bending tests. The microstructure of samples was analyzed by optical and scanning microscopy. The hydrogen content of the cladding was measured by hot extraction, prompt gamma activation analyses and neutron radiography methods. The experiments indicated that the ballooned section after oxidation becomes the weakest segment of the VVER fuel, too. According to the mechanical testing the cladding samples even after short oxidation time (200 s at 1000 deg. C) were brittle without any sign of ductile behavior. The comparison of E110 and E110G samples showed that the E110 tubes lost their load bearing capability or even integrity much earlier than the E110G samples treated under similar conditions. (authors)

36 MATERIALS SCIENCE↗

Development of Chlorination Process for Cladding Hull Waste and its Combination with Pyroprocessing

The Korea Atomic Energy Research Institute (KAERI) is spending efforts to minimize the amount of radioactive wastes generated during pyro-processing. One of the major issues is management of cladding hull waste owing to its large amount (25 wt.% of fuel) and high radioactivity. Although the cladding hull waste might be classified as an intermediate-level waste according to the Korean regulation, the large amount makes it reasonable to develop a way to reduce the amount of cladding hull waste. Previously performed radioactivation analysis results revealed that selective recovery of zirconium from the cladding hull waste will produce a weak beta-decaying zirconium. As a means of selective Zr recovery, KAERI is working on a chlorination process which employs a chemical reaction between metallic zirconium and chlorine gas. The chlorination process generates zirconium tetrachloride (ZrCl{sub 4}) which sublimes at 331 deg. C leading to an easy separation from other radioactive nuclides. KAERI has started the chlorination process R and D with small quartz reactors with grams of cladding hulls, and now its work is proceeded to fundamental approaches and scale-up. In this work, the progress achieved by KAERI on the chlorination process is reviewed and a recent approach to combine the chlorination process with pyro-processing, so-called MKZP (Min Ku Zirconium Process) is introduced. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Potential Impact of Cladding Wettability on LWR Transient Progression

The US Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is working closely with the nuclear industry to develop fuel and cladding candidates with potentially enhanced accident tolerance. This type of fuel is also known as accident tolerant fuel (ATF). Two promising cladding material candidates with potentially enhanced accident tolerance are silicon carbide (SiC) and an iron-chromium-aluminum (FeCrAl) alloy. The FeCrAl alloy features significantly enhanced oxidation resistance versus the Zr-based alloys currently used in state-of-the-art light water reactors (LWRs). Thermal-fluid characteristics are a vital element of a holistic engineering evaluation of ATF concepts. One characteristic related to boiling heat transfer is the critical heat flux (CHF). At CHF, the efficacy of heat transfer rapidly degrades and components can heat up rapidly. CHF is the heat flux at which the departure from nucleate boiling (DNB) occurs in PWRs. DNB is directly relevant to the departure from nuclear boiling ratio (DNBR), which is the ratio between the critical heat flux and the actual heat flux. Surface wettability is an important factor that influences CHF. CHF plays a significant role in determining safety margins during normal operation and also in the progression of potential transient or accident scenarios. Significant changes in CHF properties and boiling heat transfer characteristics will impact the progression of transient and accident events and reactor safety characteristics. Additionally, the behavior of the candidate cladding materials post-CHF impacts reactor safety. A brief description of the relationship between cladding material properties and CHF is provided, followed by an analysis of two hypothetical transient scenarios: a super-prompt reactivity-initiated accident (RIA) and an anticipated transient without scram with instability (ATWS-I). The analysis illustrates the potential impact of cladding material properties on safety margins via direct alteration of calculated CHF values. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal Conductivity and Diffusivity for SiC Fibers for Use in ATF Cladding Composites

As part of the accident tolerant fuels (ATF) initiative, there is a need to understand the thermophysical properties of cladding for these fuels. One potential cladding material is silicon carbide (SiC) ceramic matrix composite reinforced with SiC fibers because of the corrosion resistance, resistance to hydrogen formation, high bulk thermal conductivity, and favorable mechanical properties of SiC. However, data about the thermal properties of individual SiC fibers in these composites is absent in the literature. This paper presents the measured axial thermal conductivity and thermal diffusivity of a leading SiC fiber (HiNicalon Type S) via a thermal measurement technique (transient electrothermal technique, TET) optimized for thin fibers. The results show that the measured properties are significantly lower than bulk values for SiC. Because of the low neutron absorption, as well as excellent thermal and mechanical properties, zircaloy has primarily been used for the fuel cladding in many nuclear reactors. A major drawback of the zircaloy is its hydrogen generation vulnerability. This issue has been known for some time, but the explosion of hydrogen accident in the Fukushima Daiichi nuclear disaster has motivated efforts for accident tolerant fuels (ATF) and their cladding as suitable substitutes for zircaloy. Fuel cladding made of silicon carbide (SiC) ceramic matrix composite (CMC) is an attractive alternative to the zircaloy. Investigation on the tubular monolithic a-SiC polytropes indicates that it has superior oxidation (hydrogen production) resistance (three orders of magnitude slower) than zircaloy. Additionally, it has well-documented, favorable mechanical properties, along with high temperature corrosion resistance. However, its bulk thermal properties can vary significantly depending on polytrope, the grain size, grain boundary, or impurities. At room temperature, SiC has a thermal conductivity as high as 490 Wm{sup -1}K{sup -1}, where the {sup 6}H polytrope has the highest conductivity. Thermal measurements of the SiC CMC are usually accomplished by laser flash method for thermal diffusivity (a) and thermal conductivity is indirectly calculated through the relationship k=aρcp. Depending on the manufacturing method and the reinforced fiber, the composite thermal conductivity varies from <10 Wm{sup -1}K{sup -1} to ∼70 Wm{sup -1}K{sup -1}. While the flash method is convenient for the measurement of the composite, it is difficult to apply to the measurement of individual fibers. Because of this, the thermal properties of individual SiC fibers is not present in the literature. Because the SiC fiber manufacturing process is different than that of the SiC matrix in the CMC, the properties of the bulk material might be erroneous when applied to the fiber. Being able to measure the fiber properties independently and directly allows for an understanding of the effect of the manufacturing process on the fiber and the opportunity to potentially improve or control the thermal properties of the composite. This improved accuracy can be achieved by measuring the fiber with a technique optimized for individual fiber measurement, known as the Transient Electrothermal Technique or TET. This paper presents the thermal conductivity and diffusivity of a leading SiC fiber (HiNicalon Type S). Measurements are performed with the TET, with the resulting properties being significantly lower than the bulk values of SiC, which is one possible explanation for relatively low CMC values. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of the Chlorination Products of Zirconium Alloys used for Nuclear Fuel Cladding

The United States produces over 2000 metric tons of used nuclear fuel material per year, of which 25% is irradiated fuel cladding, and it is expected to increase for the next 50 years. Previous simulation studies have shown that in the irradiated cladding, the major activation products found are {sup 125}Sb, {sup 60}Co, and {sup 99m}Nb, and the major fission product found is {sup 137}Cs. These radioisotopes make it impossible to treat the cladding as low level waste. A chlorination process has been proposed for zirconium reprocessing as it has been proven more efficient than previous mechanical processes, redox processes, and other chemical methods (e.g. iodination). In the chlorination process, zirconium alloy cladding reacts with Cl{sub 2} at 350- 380 deg. C to produce mainly ZrCl{sub 4}. The zirconium tetrachloride has a relatively low sublimation point (331 deg. C) that allows its separation from other products, and so it can be treated as low level waste for disposal or recycling. However, previous work has observed element impurities (iron, tin, chromium, cesium, antimony, and niobium) in the recovered ZrCl{sub 4}, meaning that additional steps are necessary in a chlorination process previous to the reduction of ZrCl, to metallic Zr. The emphasis of this research summary is on the progress that has been made to isolate and characterize the impurities produced after chlorination of three previously characterized non-irradiated zirconium alloys (Zircaloy-2, Zircaloy-4, and a commercial Zr-Nb alloy) widely used as cladding materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydride Microstructure at the Metal-Oxide Interface of a Zircaloy-4 Fuel Clad from the H.B. Robinson Nuclear Reactor

During nuclear reactor operation, some of the hydrogen that is produced by the water side corrosion is uptaken by cladding. When the uptaken hydrogen content exceeds its solubility limit in the cladding at a specific temperature, it precipitates as hydride particles in the cladding. This process occurs immediately at the metal-oxide interface forming a hydride rim because of the temperature gradient in the cladding. The presence of hydride rim and its microstructure severely reduces the cladding strength and can induce crack initiation and propagation during design basis accidents, transportation, and wet/dry storage. Because hydrides platelets are one of the potent crack initiation sites, microstructural characterization of hydride rim becomes essential to the safe operation of nuclear reactor and spent nuclear fuel retrievability. Therefore, we investigate the hydride rim microstructure at the metal oxide interface using scanning transmission electron microscopy (S/TEM) with Energy Dispersive X-ray Spectroscopy (EDS) that allows for the microstructural and local chemistry characterization of hydride precipitates to be determined, and enables a relationship to be derived on how the precipitate sites are affected by the oxide and their complex stacking behavior of the precipitates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Single Rod Reflood Quenching Experiments with Simulated Decay Heat for Accident-Tolerant Fuel Claddings

The Loss-of-Coolant Accident (LOCA) is a hypothetical situation which includes a sudden loss of coolant, overheating of fuel rods, and emergency coolant injection. This situation could be modeled as a quenching process of cladding material into the coolants, a reverse process of boiling the coolants. The KAERI have been developing a CrAl-coating type Accident-Tolerant Fuel (ATF) claddings to enhance safety margin in such severe accident situations and evaluations for the performance in various aspects are on process. We established a single-rod type reflood quenching experiment setup to simulate the LOCA process. Unlike other conventional quenching experiment setup, our experiment setup is capable of heating during the reflooding process, simulating the decay heat in the real core. We installed heaters and thermocouples (TC) inside the cladding specimens to minimize any disturbances on the interfacial layer during the experiment. Currently the setup is on test run and we present experiment data and verification with conventional Zircaloy-4 claddings. We are going to conduct the reflood quenching experiment with KAERI's CrAl-coated ATF claddings to evaluate the cooling performances.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-scale modeling of wastage layer formation in metallic fuel cladding

Fuel-cladding chemical interaction (FCCI) is a major concern for U-Zr metallic fuels' performance, primarily due to the formation of a brittle layer (wastage) in the cladding. This brittle layer, resulting from intermetallic compounds between cladding constituents Fe, Cr, and lanthanide fission products, significantly impacts the cladding's mechanical integrity. Recent efforts focus on developing a mechanistic modeling framework to understand lanthanide production, transport to the fuel-cladding interface, and phase transformation to intermetallic phases. A multi-scale computational approach has been used to calculate lanthanide transport rates, with atomistic calculations determining Nd diffusivities through the solid fuel matrix and along pore surfaces. These diffusivities inform a mesoscale model to determine an effective diffusion coefficient, accounting for porosity and infiltration with bond sodium. This effective diffusivity is used in engineering-scale simulations via the BISON fuel performance code, which has been validated against EBR-II and FFTF reactor experiments.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessment of Failure Mechanisms for GFR Vented Fuel Pins Using Hexoloy Cladding

A near-term vented fuel pin concept as a back-up option for the gas-cooled fast reactor (GFR) system was evaluated. This work explored the feasibility of using mixed carbide fuel (U0.85P0.15)C with off-the-shelf monolithic SiC clad in order to meet requirements for GFR fuel with an average burnup of 10%. The stress loading on the SiC cladding due to fuel swelling and thermal stress due to temperature gradient were estimated based on the data from the development of carbide fuels in the 1970’s-1980’s and the materials properties for SiC tubes. The fuel swelling at the goal burnup (10%) is expected to produce a hoop stress of approximately 32 MPa in cladding, approaching the estimated maximum allowable hoop stress (~33 MPa) for a SiC cladding reliability of 99.99%. The estimated tensile thermal stress component (~121 MPa) near the outer surface of a monolithic SiC cladding is likely to limit its application at high temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nd, SbNd and Sb 3 Nd 4 and their interactions with the cladding alloy HT9

Lanthanide fission products, such as neodymium, formed during the irradiation of metallic fuels are known to cause deleterious effects from chemical interactions occurring at the fuel-cladding interface; a phenomenon known as fuel-cladding chemical interaction (FCCI). The use of fuel-based additives that bind with the lanthanide elements within the fuel meat, alleviating their interactions at the fuel-cladding interface, is one potential method proposed to mitigate the FCCI phenomenon and extend the burnup potential of such metallic fuel systems. In this study, antimony (Sb) is evaluated as one such additive, and neodymium (Nd) is used to represent the lanthanides. A Sb-Nd alloy is fabricated, which consists of two intermetallic phases, SbNd and Sb 3 Nd 4 . Isothermal diffusion couple experiments are carried out at 675 °C for 24 h between Nd and the Fe-12Cr based HT9 cladding alloy. The results are compared against similar diffusion couple experiments carried out between the Sb-Nd alloy and also HT9. Inter-diffusion between Nd/HT9 diffusion couple is characterized and the phases Fe 17 Nd 5 and Fe 17 Nd 2 were found to form whereas no interactions were observed in the Sb-Nd/HT9 diffusion couple. The lack of compound forming tendencies between Fe, the primary alloying constituent of HT9, and SbNd is elucidated through density functional theory (DFT) calculations on enthalpy of mixing, aligning well with the experimental observations. Lastly, the strong binding of Nd with Sb appears to be favorable, alleviating Nd interactions with HT9 constituent elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural Evolution of NiCrBSi Coatings Fabricated by Stationary Local Induction Cladding

The development of induction cladding has been restricted by the complicated geometric characteristics of workpieces and the large heat-affected zone in the cladded workpieces. In this paper, three-dimensional continual local induction cladding (3D-CLIC) was proposed as a potential process to clad coating over a substrate with curved surface, and a stationary local induction cladding (SLIC) experiment was conducted as an exploratory study of 3D-CLIC. The microstructures and microhardness in the coatings were measured by SEM, EDS, XRD and microsclerometer, respectively. The results indicate that the coating is metallurgically bonded with the substrate without any defects. A compositional gradient exists in the diffusion transfer belt (DTB), and it decreases with the increase in induction heating time. The coating is mainly composed of (Fe, Ni), CrB, M{sub 7}C{sub 3}, Ni{sub 3}B, Ni{sub 3}Si and M{sub 23}C{sub 6} (M = Cr, Ni, Fe). Among the carbides, M{sub 7}C{sub 3} presents several morphologies and M{sub 23}C{sub 6} is always attached to the DTB. A special phenomenon of texture was found in the SLIC coatings. The preferred orientation in (200) crystal plane or the restrained orientation in (111) (200) crystal plane becomes more obvious as the scanning speed increases. The maximum average microhardness is 721 HV when the coating is heated for 5 s. The wear loss of different samples increases with increasing induction heating time. The longer heating time would result in higher dilution in the SLIC coatings due to the complete mixing with the substrate, thus leading to the decrease in microhardness and wear loss.

36 MATERIALS SCIENCE↗

Cladding and Butt-Joining Dissimilar Aluminum Alloys Simultaneously via Shear Assisted Processing and Extrusion

Shear assisted processing and extrusion has been used to fabricate multi-metallic tubing that incorporates regions with clad and butt-joined structures. In this work, aluminum alloys 6061, 7075, and 1100 are combined to create a monolithic extruded tubing with weldable ends (6061), a high strength center (7075), and a corrosion-resistant cladding (1100). Optical microscopy shows a gradual, defect-free, transition between alloys at the butt-joint interfaces and a sharp transition between alloys at the clad interface. Tensile testing proved the mechanical coherency of the joint, with failure occurring outside the tri-metallic structure. In conclusion, smoothed particle hydrodynamic simulations identified a spiral pattern of the cladding alloy that leads to inconsistent cladding thickness, and identified a simplified 2-alloy combination of aluminum alloys 6082 and 2014 that accomplished the design objectives of the tri-metallic structure.

Coatings↗