Search NASA⌕ Search

SEARCH · Search NASA

Results for “column”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Observational discrimination between modes of shock propagation in interstellar clouds: Predictions of CH+ and SH+ column densities in diffuse clouds

Considerable effort in recent years has been devoted to the study of shocks in the diffuse interstellar medium. This work has been motivated partly by the observations of rotationally excited states of H2, and partly by the realization that species such as CH(+), OH and H2O might be formed preferentially in hot, post-shock gas. The problem of CH(+) and the difficulties encountered when trying to explain the high column densities, observed along lines of sight to certain hot stars, have been reviewed earlier. The importance of a transverse magnetic field on the structure of an interstellar shock was also demonstrated earlier. Transverse magnetic fields above a critical strength give rise to an acceleration zone or precursor, in which the parameters on the flow vary continuously. Chemical reactions, which change the degree of ionization of the gas, also modify the structure of the shock considerably. Recent work has shown that large column densities of CH(+) can be produced in magnetohydrodynamic shock models. Shock speeds U sub s approx. = 10 km/s and initial magnetic field strengths of a few micro G are sufficient to produce ion-neutral drift velocities which can drive the endothermic C(+)(H2,H)CH(+) reaction. It was also shown that single-fluid hydrodynamic models do not generate sufficiently large column densities of CH(+) unless unacceptably high shock velocities (u sub s approx. 20 km/s) are assumed in the models. Thus, the observed column densities of CH(+) provide a constraint on the mode of shock propagation in diffuse clouds. More precisely, they determine a lower limit to the ion-neutral drift velocity.

Flower, D. R.↗

Infrared measurements of column amounts of stratospheric constituents in the Antarctic winter, 1987

The discovery of Farman et al. of recent large depletions of ozone in the Antarctic stratosphere in the austral spring has aroused great interest because of its serious potential consequences, as well as its surprising nature. An airborne expedition, including 21 experiments on two aircraft, was mounted for Punta Arenas, Chile, in August and September, 1987, to gather a wide range of data to understand the origins and implications of this phenomenon, known as the ozone hole. As a part of this expedition, a high resolution Fourier transform spectrometer was flown on the DC-8, measuring the column amount of a number of trace gases above the flight altitude. Column results are presented only from the flight of September 21; results from other flights are included in an accompanying paper. The deduced column for ozone HCl, and NO2 deduced from the spectra, plotted as a function of latitude are shown. It should be noted that there are many other factors varying as well as the latitude, but latitude seems to be the variable which most clearly provides a passage across the vortex boundary. It can be seen that south 76 degrees S., the column of ozone, HCl, and NO2, all decreas markedly, The ratio of HCl to Hf, normally about 5:1 in midlatitudes, approaches unity. Clearly the chemistry of chlorine and nitrogen are disturbed in the region of low ozone. While dynamical theories could perhaps explain a reduction of these three gases in the same region, since all are of stratospheric origin, it is difficult to see how any purely dynamical mechanism could produce the observed HCl:HF ratio, since the two gases have similar origins. A close look at other species to be reported as well as the correlation with other measurements, such as ClO supports the conclusion that the ozone depletion is a result of chemical processes which deplete HCl and NOx relative to the midlatitude situation.

Mankin, William G.↗

Buckling and vibration analysis of a simply supported column with a piecewise constant cross section

An analysis and sample results for the lateral buckling and vibration of a compressively loaded column is presented whose cross section is piecewise constant along its length. The column is symmetric about its mid-span and consists of three sections, the center section having a stiffer cross section than the two identical end sections. Buckling and vibration characteristics of the column are determined from numerical solution of the exact eigenvalue problems. Parametric structural efficiency analyses are performed using a nondimensionalized set of governing equations to determine the optimum ratio between the lengths of the center section and the outer sections based on both buckling load and vibration frequency requirements. In these analyses, two relationships exist. One is between cross-sectional mass and the cross section, and the other is a high-efficiency scheme. The effect of axial load on vibration frequency is also examined and compared with that of a uniform column.

Lake, Mark S.↗

Column atmospheric water vapor retrievals from airborne imaging spectrometer data

High-spatial-resolution column atmospheric water vapor amounts were derived from spectral data collected by the Airborne Visible Infrared Imaging Spectrometer (AVIRIS). The quantitative derivation is made by curve fitting observed spectra with calculated spectra in the 1.14- and 0.94-micron water-vapor band absorption regions with a nonlinear least-squares technique. The precision of the retrieved column water vapor is approximately 5 percent. The derived column water vapor amounts are independent of the absolute surface reflectance. Curve fitting of spectra near 1 micron from areas covered with vegetation indicates that both the amount of atmospheric water vapor and the moisture content of vegetation can be retrieved simultaneously. It should be possible to measure column water vapor over land areas from satellite altitude with the proposed high-resolution imaging spectrometer or even the moderate-resolution imaging spectrometer.

Gao, Bo-Cai↗

A dynamical explanation for the asymmetry in zonally averaged column abundances of ozone between northern and southern springs

The observed zonally averaged column ozone shows a maximum at 90 deg N during the northern winter and spring and at 60 deg S throughout the southern winter and spring. This asymmetry is explained in the context of a zonally averaged model with coupled radiation, dynamics, and chemistry, together with consistently parameterized planetary wave driving and wave transport. It is shown that in the presence of weak wave driving, the penetration of the tropospheric circulation into the lower stratosphere and the characteristics of ozone chemistry are such that they produce a column ozone maximum at subpolar latitudes. The effect of increased wave driving is to intensify the residual circulation and extend it farther poleward, resulting in an ozone maximum at the pole. The role of the mesospheric drag is to further enhance these column ozone maxima. Model calculations show that the positions of the observed column ozone maxima are consistent with intensities of wave driving in the two hemispheres derived from data.

Hou, Arthur Y.↗

Ground-based infrared measurements of HNO3 total column abundances - Long-term trend and variability

The long-term trend and variability of the total column amount of atmospheric nitric acid (HNO3) have been investigated. The study was based on time series of infrared solar absorption spectra recorded at two sites, the International Scientific Station of the Jungfraujoch (ISSJ) in the Swiss Alps (altitude 3.6 km, latitude 46.5 N, longitude 8.0 E) and the National Solar Observatory McMath solar telescope facility on Kitt Peak (altitude 2.1 km, latitude 31.9 N, longitude 111.6 W), Arizona. Measurements of HNO3 absorption features recorded at Kitt Peak between 1980 and 1990 and measurements of the same features in ISSJ solar spectra obtained in June 1951 and June 1986 to June 1990 provide quantitative estimates of the long-term trend in the HNO3 total vertical column. It is found that the trend deduced for each site is equal to zero within the measurement uncertainty. The modern ISSJ measurements show that the fitted trend is (-0.16 + or - 0.50) percent/yr, 2 sigma, which indicates that there has been no detectable change in HNO3 total column over three decades. The Kitt Peak measurements show marked variability in the HNO3 total column, but no obvious seasonal cycle is observed.

Rinsland, C. P.↗

A silicone column for GC analysis of polar and nonpolar chemicals

The investigation of the Saturnian System is being proposed jointly by NASA and the European Space Agency (ESA). The mission is scheduled for a launch in 1996. The mission provides an opportunity for close observation and exploration of Saturn's atmosphere, the complex Saturnian System of satellites and rings, Titan (Saturn's planet-sized moon), and Saturn's magnetosphere. The mission gives special attention to Titan which is blanketed by a thick, opaque atmosphere. An atmospheric probe will be deposited into the Titan Atmosphere for in situ measurement during a slow, three hour descent to the surface. The results from this analysis may provide the information which is important to the research of chemical evolution, and the origin of life. An analytical system was developed as a part of the Titan Aerosol Gas Experiment (TAGEX), a proposed experiment for the Cassini Mission. This system will use two highly sensitive detectors, the Metastable Ionization Detector (MID) and the Ion Mobility Spectrometer (IMS). Unfortunately, when commercial columns are utilized with these highly sensitive detectors, volatile components continuously bleed from the column and interfere with the detector. In addition, light columns must be able to separate polar and nonpolar organic chemicals within 10-15 minutes under isothermal conditions for the Titan Mission. Therefore, a highly crosslinked silicone polymeric packed column was developed which is able to efficiently separate amines, alcohols, and hydrocarbons with retention times less that 15 minutes at 100 C isothermal condition.

Shen, T. C.↗

Differential SO2 column measurements of the Mt. Pinatubo volcanic plume

Differential SO2 column measurements of the Mt. Pinatubo volcanic plume were made from a NASA Electra aircraft flying in the Caribbean in July, 1991. The mean column content of the volcanic plume in the Caribbean was 25 micro-atm m (2.5 Dobson units) with periods of over 100 micro-atm m observed. The data indicate that an aerosol absorption or scattering effect occurs for long slant paths (low sun-elevation angles) and that 41 micro-atm m (an average obtained for 1-2 airmasses) is more representative of a true column average. Dispersion of the initial cloud from Mt. Pinatubo and a one-month SO2-to-sulfate conversion-time constant are in good agreement with the column contents found here.

Hoff, Raymond M.↗

Thermal disequilibrium at the top of volcanic clouds and its effect on estimates of the column height

Satellite images of large volcanic explosions reveal that the tops of volcanic eruptions columns are much cooler than the surrounding atmosphere. It is proposed that this effect occurs whenever a mixture of hot volcanic ash and entrained air ascends sufficiently high into a stably stratified atmosphere. Although the mixture is initially very hot, it expands and cools as the ambient pressure decreases. It is shown that cloud-top undercoolings in excess of 20 C may develop in clouds that penetrate the stratosphere, and it is predicted that, for a given cloud-top temperature, variations in the initial temperature of 100-200 C may correspond to variations in the column height of 5-10 km. It is deduced that the present practice of converting satellite-based measurements of the temperature at the top of volcanic eruptions columns to estimates of the column height will produce rather inaccurate results and should therefore be discontinued.

Woods, Andrew W.↗

Ground-based infrared measurements of carbonyl sulfide total column abundances - Long-term trends and variability

Attention is given to total vertical column abundances of carbonyl sulfide (OCS) derived from time series of high-resolution IR solar absorption spectra recorded near Tucson, Arizona, and in the Swiss Alps. The analysis of both data sets is based on nonlinear least squares spectral fittings of narrow intervals centered on lines of the intense nu3 band of OCS, the P(37) transition at 2045.5788/cm, and the P(15) transition at 2055.8609/cm, with a consistent set of spectroscopic line parameters. The Arizona measurements, recorded on 20 different days between May 1977 and March 1991, show a 10-percent peak-to-peak seasonal cycle with a summer maximum and a winter minimum and a trend in the total column abundance equal to (0.1 +/-0.2) percent/yr, 2sigma. The Alpine total columns exhibit a more complex seasonal variation than noted in the Arizona data. The results from the two sites indicate that there has been no significant change in the OCS total column abundance at northern midlatitudes over the last decade.

Rinsland, C. P.↗

NO2 column intercomparison between ground-based measurements at Lauder, New Zealand (45 deg S) and colocated SAGE II satellite measurements

NO2 columns measured at sunset from Lauder, New Zealand (45 deg S, 169.7 deg E) are compared with columns derived from colocated profiles measured by the SAGE II satellite instrument. The comparison period covers more than 3 yr of data since the launch of SAGE II in October 1984. The seasonal cycle is well reproduced in the SAGE II data, and there is reasonable agreement between it and the ground based data. Over the period from 1984 to 1988 the SAGE II NO2 columns show a definite decrease while the Lauder columns remain relatively constant.

Mckenzie, R. L.↗

Notes on the design of latticed columns subject to lateral loads

No rational column formula has yet been developed which gives results which are sufficiently precise for the design of airplane members, and consequently it is necessary to fall back upon experimental testing. In order to derive the maximum benefit from experiments, however, it is necessary that the experiments be guided by theory. It is the object here to modify existing formulae that may be obtained with a minimum number of tests. A discussion is given that is limited to the case of a simple column supported at both ends and subjected to uniformly distributed loads perpendicular to its axis and to end loads either axially or eccentrically applied. Discussed here are forces in the bracing of latticed columns, the application of theory to practical columns, loads in lattice members, and the strength of individual lattices.

Mccarthy, Charles J↗

Column strength of magnesium alloy AM-57S

Tests were made to determine the column strength of extruded magnesium alloy AM-57S. Column specimens were tested with round ends and with flat ends. It was found that the compressive properties should be used in computations for column strengths rather than the tensile properties because the compressive yield strength was approximately one-half the tensile yield strength. A formula for the column strength of magnesium alloy AM-57S is given.

Holt, M↗

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to Young's modulus, based on the tests, are given.

Osgood, William R↗

Sub-ply level scaling approach investigated for graphite-epoxy composite beam columns

Scale model graphite-epoxy composite specimens were fabricated using the 'sub-ply level' approach and tested as beam-columns under an eccentric axial load to determine the effect of specimen size on flexural response and failure. In the current research project, although the fiber diameters are not scaled, the thickness of the pre-preg material itself has been scaled by adjusting the number of fibers through the thickness of a single ply. Three different grades of graphite-epoxy composite material (AS4/3502) were obtained from Hercules, Inc., in which the number of fibers through the thickness of a single ply was reduced (Grade 190 with 12 to 16 fibers, Grade 95 with 6 to 8 fibers, and Grade 48 with 3 to 4 fibers). Thus, using the sub-ply level approach, a baseline eight ply quasi-isotropic laminate could be fabricated using either the Grade 48 or Grade 95 material and the corresponding full-scale laminate would be constructed from Grade 95 or standard Grade 190 material, respectively. Note that in the sub-ply level approach, the number of ply interfaces is constant for the baseline and full-scale laminates. This is not true for the ply level and sublaminate level scaled specimens. The three grades of graphite-epoxy composite material were used to fabricate scale model beam-column specimens with in-plane dimensions of 0.5*n x 5.75*n, where n=1,2,4 corresponsing to 1/4, 1/2, and full-scale factors. Angle ply, cross ply, and quasi-isotropic laminate stacking sequences were chosen for the investigation and the test matrices for each laminate type are given. Specimens in each laminate family with the same in-plane dimensions but different thicknesses were tested to isolate the influence of the thickness dimension on the flexural response and failure. Also, specific lay-ups were chosen with blocked plies and dispersed plies for each laminate type. Specimens were subjected to an eccentric axial load until failure. The load offset was introduced through a set of hinges which were attached to the platens of a standard load test machine. Three sets of geometrically scaled hinges were used to ensure that scaled loading conditions were applied. This loading condition was chosen because it promotes large flexural deformations and specimens fail at the center of the beam, away from the grip supports. Five channels of data including applied vertical load, end shortening displacement, strain from gages applied back-to-back at the midspan of the beam, and rotation of the hinge from a bubble inclinometer were recorded for each specimen. The beam-column test configuration was used previously to study size effects in ply level scaled composite specimens of the same material system, sizes, and stacking sequences. Thus, a direct comparison between the two scaling approaches is possible. Ply level scaled beam-columns with angle ply, cross ply, and quasi-isotropic lay-ups exhibited no size dependencies in the flexural response, but significant size effects in strength. The reduction in strength with increasing specimen size was not predicted successfully by analysis techniques. It is anticipated that results from this investigation will lead to a better understanding of the strength scale effect in composite structures.

Jackson, Karen E.↗

NO2 column changes induced by volcanic eruptions

Nitrogen dioxide slant column amounts measured by ground-based remote sensing from Lauder, New Zealand (45 deg S) and Campbell Island (53 deg S) during the second half of 1991 and early 1992 show anomalously low values that are attributed to the effects of volcanic eruptions. It is believed that the eruptions of Mount Pinatubo in the Philippines in June 1991 and possibly Mount Hudson in Chile in August 1991 are responsible for the stratospheric changes, which first became apparent in July 1991. The effects in the spring of 1991 are manifested as a reduction in the retrieved NO2 column amounts from normal levels by 35 to 45 percent, and an accompanying increase in the overnight decay of NO2. The existence of an accurate long-term record of column NO2 from the Lauder site enables us to quantify departures from the normal seasonal behavior with some confidence. Simultaneous retrievals of column ozone agree well with Dobson measurements, confirming that only part of the NO2 changes can be attributed to a modification of the scattering geometry by volcanic aerosols. Other reasons for the observed behavior are explored, including the effects of stratospheric temperature increases resulting from the aerosol loading and the possible involvement of heterogeneous chemical processes.

Johnston, Paul V.↗

Adjustable bias column end joint assembly

An adjustable mechanical end joint system for connecting structural column elements and eliminating the possibility of free movement between joint halves during loading or vibration has a node joint body having a cylindrical engaging end and a column end body having a cylindrical engaging end. The column end joint body has a compressible preload mechanism and plunger means housed therein. The compressible preload mechanism may be adjusted from the exterior of the column end joint body through a port.

Wallsom, Richard E.↗

The hard X-ray emission spectra from accretion columns in intermediate polars

We consider the hard (greater than 2 keV) X-ray emission from accretion columns in an intermediate polar system, GK Per, using a simple settling solution. The rate of photon emission per logarithmic energy interval can be fitted with a power law, E(exp -gamma), with gamma approximately 2.0, in agreement with observations. This index is only weakly dependent on the mass accretion rate, dot-M, for dot-M in the range of a few times 10(exp 16-18) g/s. The peak energy of the photon spectra (after photoelectric absorption) is expected to be E(sub p) approximately (5 keV) gamma(exp -1/3) (N(sub H)/10(exp 23)/sq cm)(exp 1/3) where N(sub H) is the hydrogen column density along the line of sight. The observed spectra of GK Per and possibly of V1223 Sgr suggest N(sub H) approximately 10(exp 23)/sq cm. This large N(sub H) may be due to partially ionized preshock column material. Alternatively, we also consider absorption by the cool outer parts of an accretion disk. In this case the photoelectric absorption depth in the disk is a sensitive function of inclination. For GK Per the required inclination is approximately 83 deg. For mass accretion rates larger than a critical rate of approximately 10(exp 18) g/s, X-ray emission from the column accretion is significantly affected by radiation drag. Although the mass accretion rate increases dramatically during outbursts, the observed hard (greater than 2 keV) X-ray luminosity will not rise proportionately. The slope and peak energy of the outburst spectra are only weakly affected. We conclude that the observed X-ray spectra can be explained by this simple analytic solution and that the production of hard X-rays from the accretion shock at the magnetic poles in the intermediate polars is in general agreement with the observations. However, since the X-ray emission and absorption depend on the mass accretion rate in a complicated manner, observed hard X-ray luminosities (greater than 2 keV) are not a good indicator of the mass accretion rate in the X-ray emitting regions.

Yi, Insu↗