Search NASA⌕ Search

SEARCH · Search NASA

Results for “computational modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Structural system reliability under multiple failure modes

This paper describes a computational method for system reliability estimation of propulsion structures. The failure domain of the entire structural system is computed through the union of failure regions for various critical system failure modes. The effect of non-critical progressive damage is incorporated through structural reanalysis, resulting in the construction of several linear segments to approximately cover the system failure domain. An adaptive damage imposition scheme is outlined for the sake of computational efficiency. The proposed method is used to construct the system survival cdf (cumulative distribution function) of a two-rotor system.

Mahadevan, S.↗

Development of biomechanical models for human factors evaluations

Previewing human capabilities in a computer-aided engineering mode has assisted greatly in planning well-designed systems without the cost and time involved in mockups and engineering models. To date, the computer models have focused on such variables as field of view, accessibility and fit, and reach envelopes. Program outputs have matured from simple static pictures to animations viewable from any eyepoint. However, while kinematics models are available, there are few biomechanical models available for estimating strength and motion patterns. Those, such as Crew Chief, that are available are based on strength measurements taken in specific positions. Johnson Space Center is pursuing a biomechanical model which will use strength data collected on single joints at two or three velocities to attempt to predict compound motions of several joint simultaneously and the resulting force at the end effector. Two lines of research are coming together to produce this result. One is an attempt to use optimal control theory to predict joint motion in complex motions, and another is the development of graphical representation of human capabilities. The progress to date in this research is described.

Woolford, Barbara↗

Structural dynamic and control considerations for Space Station transportation node concepts

This paper discusses the results of two studies which investigated the expected low frequency dynamic characteristics of conceptual Mars and lunar transportation nodes. Both concepts are based on evolution of the assembly-complete Space Station Freedom configuration by the addition of keels, booms, and modules. Finite-element models of the concepts were developed and a set of undamped modes and frequencies was computed below 2 Hz for each concept. The modes were used as basis vectors for modal analyses describing the dynamic response of the structures to typical reboost maneuvers. The reboost maneuvers had fairly complex loading characteristics since the reaction control system (RCS) jets used for the maneuvers were off-modulated to control pitch and yaw attitude. Interaction of the dynamic response of the structure with the closed-loop attitude control system is investigated for both concepts. The elastic response in the solar dynamic region is investigated to evaluate the severity of the dynamic environment, since the solar dynamic systems have stringent sunpointing requirements which must be maintained during the reboost maneuver.

Cooper, Paul A.↗

Efficient eigensolution reanalysis of nonclassically damped structures

Effective methods of approximate eigensolution reanalysis of modified nonclassically damped structures are developed. For structures with passive or active discrete damping devices or with damping treatment, the system becomes nonproportionally damped and the computation of its dynamic responses may require the use of complex modes. For larger systems, the computation of complex modes is very expensive. Thus it is desirable to have approximate reanalysis techniques for the efficient evaluation of the effect of design changes. In recent years, the assumed mode reanalysis method was successfully applied to minimum weight design of undamped structures with natural frequency constraints. The accuracy of the assumed mode reanalysis method can be improved dramatically if the global approximation function includes the normal modes of the original system and their derivatives. This approach was demonstrated to be effective even for a system with shape changes. The approach used by Noor et al. for eigensolution reanalysis of undamped structures is extended to treat a nonclassically damped system.

Wang, Bo Ping↗

Analysis of Composite Skin-Stiffener Debond Specimens Using Volume Elements and a Shell/3D Modeling Technique

The debonding of a skin/stringer specimen subjected to tension was studied using three-dimensional volume element modeling and computational fracture mechanics. Mixed mode strain energy release rates were calculated from finite element results using the virtual crack closure technique. The simulations revealed an increase in total energy release rate in the immediate vicinity of the free edges of the specimen. Correlation of the computed mixed-mode strain energy release rates along the delamination front contour with a two-dimensional mixed-mode interlaminar fracture criterion suggested that in spite of peak total energy release rates at the free edge the delamination would not advance at the edges first. The qualitative prediction of the shape of the delamination front was confirmed by X-ray photographs of a specimen taken during testing. The good correlation between prediction based on analysis and experiment demonstrated the efficiency of a mixed-mode failure analysis for the investigation of skin/stiffener separation due to delamination in the adherents. The application of a shell/3D modeling technique for the simulation of skin/stringer debond in a specimen subjected to three-point bending is also demonstrated. The global structure was modeled with shell elements. A local three-dimensional model, extending to about three specimen thicknesses on either side of the delamination front was used to capture the details of the damaged section. Computed total strain energy release rates and mixed-mode ratios obtained from shell/3D simulations were in good agreement with results obtained from full solid models. The good correlations of the results demonstrated the effectiveness of the shell/3D modeling technique for the investigation of skin/stiffener separation due to delamination in the adherents.

Krueger, Ronald↗

Direct modeling parameter signature analysis and failure mode prediction of physical systems using hybrid computer optimization

High speed automated identification and design of dynamic systems, both linear and nonlinear, are discussed. Special emphasis is placed on developing hardware and techniques which are applicable to practical problems. The basic modeling experiment and new results are described. Using the improvements developed successful identification of several systems, including a physical example as well as simulated systems, was obtained. The advantages of parameter signature analysis over signal signature analysis in go-no go testing of operational systems were demonstrated. The feasibility of using these ideas in failure mode prediction in operating systems was also investigated. An improved digital controlled nonlinear function generator was developed, de-bugged, and completely documented.

Drake, R. L.↗

MMIC devices for active phased array antennas

The study of printed circuit discontinuities is necessary in order to design, for example, transitions between rectangular waveguides and printed circuits. New developments with respect to the analytical approaches to this problem are discussed. A summary of the progress in the experimental approach is presented. The accurate solution for the modes in various millimeter-wave waveguides is essential in the analysis of many integrated circuit components, such as filters and impedance transformers. Problems associated with the numerical computation of these modes in two frequently used waveguide forms, namely, the finline and microstrip, are presented. The spectral domain method of formulation, with a moment method solution, is considered. This approach can be readily extended to analyze an arbitrary configuration of dielectric and metallized regions in a shielded enclosure. Galerkin's method is used, where the testing and basic functions are the same. It is shown that the mode functions, or eigenfunctions, are more sensitive to errors than the phase constants, or eigenvalues. The approximate mode functions do not satisfy the orthogonality relationship well, resulting in difficulties when these modal solutions are used to form an approximate Green's function or are used in a mode matching analysis.

Mittra, R.↗

Dynamo magnetic field modes in thin astrophysical disks - An adiabatic computational approximation

An adiabatic approximation is applied to the calculation of turbulent MHD dynamo magnetic fields in thin disks. The adiabatic method is employed to investigate conditions under which magnetic fields generated by disk dynamos permeate the entire disk or are localized to restricted regions of a disk. Two specific cases of Keplerian disks are considered. In the first, magnetic field diffusion is assumed to be dominated by turbulent mixing leading to a dynamo number independent of distance from the center of the disk. In the second, the dynamo number is allowed to vary with distance from the disk's center. Localization of dynamo magnetic field structures is found to be a general feature of disk dynamos, except in the special case of stationary modes in dynamos with constant dynamo number. The implications for the dynamical behavior of dynamo magnetized accretion disks are discussed and the results of these exploratory calculations are examined in the context of the protosolar nebula and accretion disks around compact objects.

Stepinski, T. F.↗

Preliminary design data package, appendices C1 and C2

The HYBRID2 program which computes the fuel and energy consumption of a hybrid vehicle with a bi-modal control strategy over specified component driving cycles is described. Fuel and energy consumption are computed separately for the two modes of operation. The program also computes yearly average fuel and energy consumption using a composite driving cycle which varies as a function of daily travel. The modelling techniques are described, and subroutines and their functions are given. The composition of modern automobiles is discussed along with the energy required to manufacture an American automobile. The energy required to scrap and recycle automobiles is also discussed.

Source record↗

Efficient multimode Wigner tomography

Abstract Advancements in quantum system lifetimes and control have enabled the creation of increasingly complex quantum states, such as those on multiple bosonic cavity modes. When characterizing these states, traditional tomography scales exponentially with the number of modes in both computational and experimental measurement requirement, which becomes prohibitive as the system size increases. Here, we implement a state reconstruction method whose sampling requirement instead scales polynomially with system size, and thus mode number, for states that can be represented within such a polynomial subspace. We demonstrate this improved scaling with Wigner tomography of multimode entangled W states of up to 4 modes on a 3D circuit quantum electrodynamics (cQED) system. This approach performs similarly in efficiency to existing matrix inversion methods for 2 modes, and demonstrates a noticeable improvement for 3 and 4 modes, with even greater theoretical gains at higher mode numbers.

Science & Technology - Other Topics↗

Moving target, distributed, real-time simulation using Ada

Research on a precompiler solution is described for the moving target compiler problem encountered when trying to run parallel simulation algorithms on several microcomputers. The precompiler is under development at NASA-Lewis for simulating jet engines. Since the behavior of any component of a jet engine, e.g., the fan inlet, rear duct, forward sensor, etc., depends on the previous behaviors and not the current behaviors of other components, the behaviors can be modeled on different processors provided the outputs of the processors reach other processors in appropriate time intervals. The simulator works in compute and transfer modes. The Ada procedure sets for the behaviors of different components are divided up and routed by the precompiler, which essentially receives a multitasking program. The subroutines are synchronized after each computation cycle.

Collins, W. R.↗

Neotectonics of Asia: Thin-shell finite-element models with faults

As India pushed into and beneath the south margin of Asia in Cenozoic time, it added a great volume of crust, which may have been (1) emplaced locally beneath Tibet, (2) distributed as regional crustal thickening of Asia, (3) converted to mantle eclogite by high-pressure metamorphism, or (4) extruded eastward to increase the area of Asia. The amount of eastward extrusion is especially controversial: plane-stress computer models of finite strain in a continuum lithosphere show minimal escape, while laboratory and theoretical plane-strain models of finite strain in a faulted lithosphere show escape as the dominant mode. We suggest computing the present (or neo)tectonics by use of the known fault network and available data on fault activity, geodesy, and stress to select the best model. We apply a new thin-shell method which can represent a faulted lithosphere of realistic rheology on a sphere, and provided predictions of present velocities, fault slip rates, and stresses for various trial rheologies and boundary conditions. To minimize artificial boundaries, the models include all of Asia east of 40 deg E and span 100 deg on the globe. The primary unknowns are the friction coefficient of faults within Asia and the amounts of shear traction applied to Asia in the Himalayan and oceanic subduction zones at its margins. Data on Quaternary fault activity prove to be most useful in rating the models. Best results are obtained with a very low fault friction of 0.085. This major heterogeneity shows that unfaulted continum models cannot be expected to give accurate simulations of the orogeny. But, even with such weak faults, only a fraction of the internal deformation is expressed as fault slip; this means that rigid microplate models cannot represent the kinematics either. A universal feature of the better models is that eastern China and southeast Asia flow rapidly eastward with respect to Siberia. The rate of escape is very sensitive to the level of shear traction in the Pacific subduction zones, which is below 6 MPa. Because this flow occurs across a wide range of latitudes, the net eastward escape is greater than the rate of crustal addition in the Himalaya. The crustal budget is balanced by extension and thinning, primarily within the Tibetan plateau and the Baikal rift. The low level of deviation stresses in the best models suggests that topographic stress plays a major role in the orogeny; thus, we have to expect that different topography in the past may have been linked with fundamentally different modes of continental collision.

Kong, Xianghong↗

Investigation of the Impact of Flow on MHD Perturbations with the NIMROD Code (Final Report)

This work will enable improved understanding of tokamak edge flows and impurity-species dynamics and their impact on MHD stability as it relates to ELMs, RMPs and QH-mode by leveraging computational developments of the NIMROD code. Experimentally, it is established that the tokamak flows and impurities species can have a substantial effect on MHD stability. This is particularly true for the edge plasma where, for example, large flow shear is correlated with the occurrence of the Quiescent H-mode (QH- mode) state as opposed to operation with edge localized modes (ELMs). Understanding plasma flows is challenging because of the many physical effects that come into play: particle orbits loss, neutrals dynamics, and interaction between multiple ion species with decoupled motion. We will develop a model that incorporates multiple ion species into the MHD framework that includes self-consistent magnetic-field evolution. With this model we will understand how the presence of impurities impacts the tokamak edge-pedestal flows. Finally, we will quantify the impact of the new multiple species modeling on 3D QH-mode simulations. This work will have broader impacts on all MHD studies when multiple species are present (as is the case in modern tokamaks), as well as contributing to the edge and transport communities who also are interested in the studies of multiple-ion-species flows in the edge pedestal region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two dimensional nearly de Sitter gravity

We study some aspects of the de Sitter version of Jackiw-Teitelboim gravity. Though we do not have propagating gravitons, we have a boundary mode when we compute observables with a fixed dilaton and metric at the boundary. We compute the no-boundary wavefunctions and probability measures to all orders in perturbation theory. We also discuss contributions from different topologies, borrowing recent results by Saad, Shenker and Stanford. We discuss how the boundary mode leads to gravitational corrections to cosmological observables when we add matter. Finally, starting from a four dimensional gravity theory with a positive cosmological constant, we consider a nearly extremal black hole and argue that some observables are dominated by the two dimensional nearly de Sitter gravity dynamics.

2D gravity↗

A new method to real-normalize measured complex modes

A time domain subspace iteration technique is presented to compute a set of normal modes from the measured complex modes. By using the proposed method, a large number of physical coordinates are reduced to a smaller number of model or principal coordinates. Subspace free decay time responses are computed using properly scaled complex modal vectors. Companion matrix for the general case of nonproportional damping is then derived in the selected vector subspace. Subspace normal modes are obtained through eigenvalue solution of the (M sub N) sup -1 (K sub N) matrix and transformed back to the physical coordinates to get a set of normal modes. A numerical example is presented to demonstrate the outlined theory.

Wei, Max L.↗

Geometric Effects on the Amplification of First Mode Instability Waves

The effects of geometric changes on the amplification of first mode instability waves in an external supersonic boundary layer were investigated using numerical techniques. Boundary layer stability was analyzed at Mach 6 conditions similar to freestream conditions obtained in quiet ground test facilities so that results obtained in this study may be applied to future test article design to measure first mode instability waves. The DAKOTA optimization software package was used to optimize an axisymmetric geometry to maximize the amplification of the waves at first mode frequencies as computed by the 2D STABL hypersonic boundary layer stability analysis tool. First, geometric parameters such as nose radius, cone half angle, vehicle length, and surface curvature were examined separately to determine the individual effects on the first mode amplification. Finally, all geometric parameters were allowed to vary to produce a shape optimized to maximize the amplification of first mode instability waves while minimizing the amplification of second mode instability waves. Since first mode waves are known to be most unstable in the form of oblique wave, the geometries were optimized using a broad range of wave frequencies as well as a wide range of oblique wave angles to determine the geometry that most amplifies the first mode waves. Since first mode waves are seen most often in flows with low Mach numbers at the edge of the boundary layer, the edge Mach number for each geometry was recorded to determine any relationship between edge Mach number and the stability of first mode waves. Results indicate that an axisymmetric cone with a sharp nose and a slight flare at the aft end under the Mach 6 freestream conditions used here will lower the Mach number at the edge of the boundary layer to less than 4, and the corresponding stability analysis showed maximum first mode N factors of 3.

Kirk, Lindsay C.↗

Pilot's manual for automated 4D guidance system

Operational procedures and modes of an experimental 4D guidance system are described from the pilot's point of view. The system consists of the experimental avionics equipment referred to as STOLAND and a specially developed software package for the STOLAND digital computer. A capture mode of the system provides arrival time control and automatic tracking of the 4D flight path from any feasible initial aircraft state to any waypoint. Precise arrival time at a waypoint is achieved by means of speed control or, if large delays are required, by path stretching. Continuous recomputation and display of the capture flight path prior to engaging the system permits the pilot to determine the exact moment for terminating a holding or path stretching maneuver in order to achieve a specified arrival time.

Erzberger, H.↗

Resistive Alfven normal modes in a non-uniform plasma

Resistive normal mode solutions of the MHD equations are found numerically in a smooth, nonuniform, magnetic field. The (alpha, S) boundary within which normal mode solutions exist is explicitly computed, where alpha is the normalized wavenumber and S the Lundquist number. As an extension of previous analytic results of Mok and Einaudi (1985), the damping rate of these modes is computed to a higher accuracy, and is found to have an a + bS exp -1/3 dependence, where a and b are independent of S.

Einaudi, G.↗