Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer supported collaborative work”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Coastal Ohio Wind Project

The Coastal Ohio Wind Project intends to address problems that impede deployment of wind turbines in the coastal and offshore regions of Northern Ohio. The project evaluates different wind turbine designs and the potential impact of offshore turbines on migratory and resident birds by developing multidisciplinary research, which involves wildlife biology, electrical and mechanical engineering, and geospatial science. Firstly, the project conducts cost and performance studies of two- and three-blade wind turbines using a turbine design suited for the Great Lakes. The numerical studies comprised an analysis and evaluation of the annual energy production of two- and three-blade wind turbines to determine the levelized cost of energy. This task also involved wind tunnel studies of model wind turbines to quantify the wake flow field of upwind and downwind wind turbine-tower arrangements. The experimental work included a study of a scaled model of an offshore wind turbine platform in a water tunnel. The levelized cost of energy work consisted of the development and application of a cost model to predict the cost of energy produced by a wind turbine system placed offshore. The analysis found that a floating two-blade wind turbine presents the most cost effective alternative for the Great Lakes. The load effects studies showed that the two-blade wind turbine model experiences less torque under all IEC Standard design load cases considered. Other load effects did not show this trend and depending on the design load cases, the two-bladed wind turbine showed higher or lower load effects. The experimental studies of the wake were conducted using smoke flow visualization and hot wire anemometry. Flow visualization studies showed that in the downwind turbine configuration the wake flow was insensitive to the presence of the blade and was very similar to that of the tower alone. On the other hand, in the upwind turbine configuration, increasing the rotor blade angle of attack reduced the wake size and enhanced the vortices in the flow downstream of the turbine-tower compared with the tower alone case. Mean and rms velocity distributions from hot wire anemometer data confirmed that in a downwind configuration, the wake of the tower dominates the flow, thus the flow fields of a tower alone and tower-turbine combinations are nearly the same. For the upwind configuration, the mean velocity shows a narrowing of the wake compared with the tower alone case. The downwind configuration wake persisted longer than that of an upwind configuration; however, it was not possible to quantify this difference because of the size limitation of the wind tunnel downstream of the test section. The water tunnel studies demonstrated that the scale model studies could be used to adequately produce accurate motions to model the motions of a wind turbine platform subject to large waves. It was found that the important factors that affect the platform is whether the platform is submerged or surface piercing. In the former, the loads on the platform will be relatively reduced whereas in the latter case, the structure pierces the wave free surface and gains stiffness and stability. The other important element that affects the movement of the platform is depth of the sea in which the wind turbine will be installed. Furthermore, the wildlife biology component evaluated migratory patterns by different monitoring systems consisting of marine radar, thermal IR camera and acoustic recorders. The types of radar used in the project are weather surveillance radar and marine radar. The weather surveillance radar (1988 Doppler), also known as Next Generation Radar (NEXRAD), provides a network of weather stations in the US. Data generated from this network were used to understand general migratory patterns, migratory stopover habitats, and other patterns caused by the effects of weather conditions. At a local scale our marine radar was used to complement the datasets from NEXRAD and to collect additional monitoring parameters such as passage rates, flight paths, flight directions, and flight altitudes of nocturnal migrating species. Our work focused on the design and development of custom built marine radar that used t-bar and parabolic dish antennas. The marine radar used in the project was Furuno (XANK250) which was coupled with a XIR3000B digitizing card from Russell Technologies for collection of the radar data. The radar data was processed by open source radR processing software using different computational techniques and methods. Additional data from thermal IR imaging cameras were collected to detect heat emitted from objects and provide information on movements of birds and bats, data which we used for different animal flight behavior analysis. Lastly, the data from the acoustic recorders were used to provide the number of bird calls for assessing patterns and peak passage rates during migration. The development of the geospatial database included collection of different data sources that are used to support offshore wind turbine development. Many different data sets were collected and organized using initial version of web-based repository software tools that can accommodate distribution of rectified pertinent data sets such as the lake depth, lake bottom engineering parameters, extent of ice, navigation pathways, wind speed, important bird habitats, fish efforts and other layers that are relevant for supporting robust offshore wind turbine developments. Additional geospatial products developed during the project included few different prototypes for offshore wind farm suitability which can involve different stakeholders and participants for solving complex planning problems and building consensus. Some of the prototypes include spatial decision support system (SDSS) for collaborative decision making, a web-based Participatory Geographic Information System (PGIS) framework for evaluating importance of different decision alternatives using different evaluation criteria, and an Android application for collection of field data using mobile and tablet devices . In summary, the simulations of two- and three-blade wind turbines suggested that two-bladed machines could produce comparable annual energy as the three-blade wind turbines but have a lighter tower top weight, which leads to lower cost of energy. In addition, the two-blade rotor configuration potentially costs 20% less than a three blade configuration that produces the same power at the same site. The cost model analysis predicted a potential cost savings of approximately 15% for offshore two-blade wind turbines. The foundation design for a wind turbine in Lake Erie is likely to be driven by ice loads based on the currently available ice data and ice mechanics models. Hence, for Lake Eire, the cost savings will be somewhat smaller than the other lakes in the Great Lakes. Considering the size of cranes and vessels currently available in the Great Lakes, the cost optimal wind turbine size should be 3 MW, not larger. The surveillance data from different monitoring systems suggested that bird and bat passage rates per hour were comparable during heavy migrations in both spring and fall seasons while passage rates were significantly correlated to wind directions and wind speeds. The altitude of migration was higher during heavy migrations and higher over water relative to over land. Notable portions of migration on some spring nights occurred parallel the shoreline, often moving perpendicular to southern winds. The birds approaching the Western basin have a higher propensity to cross than birds approaching the Central basin of Lake Erie and as such offshore turbine development might be a better option further east towards Cleveland than in the Western basin. The high stopover density was more strongly associated with migration volume the following night rather than the preceding night. The processed mean scalar wind speeds with temporal resolutions as fine as 10-minute intervals near turbine height showed that August is the month with the weakest winds while December is the month, which typically has the strongest winds. The ice data suggests that shallow western basin of Lake Erie has higher ice cover duration many times exceeding 90 days during some winters.

17 WIND ENERGY↗

XACML profile and implementation for authorization interoperability between OSG and EGEE

The Open Science Grid (OSG) and the Enabling Grids for E-sciencE (EGEE) have a common security model, based on Public Key Infrastructure. Grid resources grant access to users because of their membership in a Virtual Organization (VO), rather than on personal identity. Users push VO membership information to resources in the form of identity attributes, thus declaring that resources will be consumed on behalf of a specific group inside the organizational structure of the VO. Resources contact an access policies repository, centralized at each site, to grant the appropriate privileges for that VO group. Before the work in this paper, despite the commonality of the model, OSG and EGEE used different protocols for the communication between resources and the policy repositories. Hence, middleware developed for one Grid could not naturally be deployed on the other Grid, since the authorization module of the middleware would have to be enhanced to support the other Grid's communication protocol. In addition, maintenance and support for different authorization call-out protocols represents a duplication of effort for our relatively small community. To address these issues, OSG and EGEE initiated a joint project on authorization interoperability. The project defined a common communication protocol and attribute identity profile for authorization call-out and provided implementation and integration with major Grid middleware. The activity had resonance with middleware development communities, such as the Globus Toolkit and Condor, who decided to join the collaboration and contribute requirements and software. In this paper, we discuss the main elements of the profile, its implementation, and deployment in EGEE and OSG. We focus in particular on the operations of the authorization infrastructures of both Grids.

99 GENERAL AND MISCELLANEOUS↗

Scientific Data Management Integrated Software Infrastructure Center (SDM/ISIC): Scientific Process Automation (SPA) (Final Report)

The KEPLER project has made a significant impact and established a sustained leadership in the field of scientific workflows. The open source KEPLER project started in 2003 when members of the SciDAC-SDM Center/SPA Team, sponsored by this DOE-funded project (DE-FC02-01ER25486) and members of the SEEK project (NSF/ITR awards DBI-0225674 and DBI-0533368) decided to collaborate and jointly develop a scientific workflow system based on the open source PTOLEMY II system (Ludäscher was a co-PI on both projects). In the first project phase, between 2001 and 2003, the SDSC team (Altintas, Ludäscher) worked closely with a domain scientist (Matt Coleman, LLNL) and created early versions of a Promoter Identification Workflow (PIW). Towards the end of that period, the open source PTOLEMY II system was adopted by SciDAC-SDM and SEEK as the basis for a general scientific workflow system and problem-solving environment to design and execute scientific workflows, giving rise to Kepler. Once started through SciDAC-SDM and SEEK, the KEPLER leadership team was able to attract further support from funding agencies including from DOE (as part of SciDAC-2), NSF, NIH, and the Gordon and Betty Moore Foundation. Important advances to KEPLER were made by the SciDAC/SDM-SPA team during the report period (2001–2007), in particular by the SDSC team (and after Ludäscher's move) the UC Davis team, including (i) research and development of the workflow infrastructure, (ii) library (actor) development, and (iii) development of concrete scientific workflows, in collaboration with scientists. Years later, the KEPLER system was listed as one of the prominent “Big Data” research outcomes of DOE in the White House Big Data Factsheet, announced as part of the White House Big Data press release.

97 MATHEMATICS AND COMPUTING↗

Challenges and Opportunities of User-Level File Systemsfor HPC

The performance gap between magnetic disks and data processing on HPC systems has become that huge that an efficient data processing can only be achieved by introducing non-volatile memory (NVRAM) as a new storage tier. Although the benefits of hierarchical storage have been adequately demonstrated to the point that the newest leadership class HPC systems will employ burst buffers, critical questions remain for supporting hierarchical storage systems, including: How should we present hierarchical storage systems to user applications, such that they are easy to use and that application code is portable across systems? How should we manage data movement through a storage hierarchy for best performance and resilience of data? How do the particular I/O use cases mandate the way we manage data? There have been many efforts to explore this space in the form of file systems, with increasingly more implemented at the user level. This is because it is relatively easy to swap in new, specialized user-level file systems for use by applications on a case-by-case basis, as opposed to the current mainstream approach of using general-purpose, system-level file systems which may not be optimized for HPC workloads and must be installed by administrators. In contrast, file systems at the user level can be tailored for specific HPC workloads for high performance and can be used by applications without administrator intervention. Many user-level file system developers have found themselves “having to reinvent the wheel” to implement various optimizations in their file systems. Thus, a main goal of this meeting was to bring together experts in I/O performance, file systems, and storage, and collectively explore the space of current and future problems and solutions for I/O on hierarchical storage systems in order to begin a community effort in enabling user-level file system support for HPC systems. We had a lively week of learning about each other’s approaches as well as unique I/O use cases that can influence the design of a community-driven file and storage system standards. The agenda for this meeting contained talks from participants on the following high level topics: HPC storage and I/O support today; what do HPC users need for I/O; existing userlevel file system efforts; object stores and other alternative storage systems; and components for building user-level file systems. The talks were short and intended to be conversation starters for more in-depth discussions with the whole group. The participants engaged in lengthy discussions on various questions that arose from the talks including: Are we ready to program to a memory hierarchy versus block devices? Are the needs of HPC users reflected in our existing file systems and storage systems? Should we drop or keep POSIX moving forward? What do we mean when we say “user-level file system”? Do we all mean the same thing? How should the IO 500 benchmark be defined so it is fair and useful? and How are stage-in and stage-out actually going to work? The report for this seminar contains a record of the talks from the participants as well as the resulting discussions. Our hope is that the effort initiated during this seminar will result in long-term collaborations that will benefit the HPC community as a whole.

97 MATHEMATICS AND COMPUTING↗

Alternative D and D Planning Tool - 12466

On August 1, 2011, URS - CH2M Oak Ridge LLC (UCOR) began cleanup of the East Tennessee Technology Park (ETTP). UCOR's $2.2 billion contract has an initial five-year term and a four-year option period for completing the cleanup of ETTP and performing surveillance and maintenance and waste management operations at both the Oak Ridge National Laboratory and the Y-12 National Security Complex. ETTP D and D work includes disposition of large, complex, contaminated, Manhattan Project-era facilities such as the K-25 and K-27 uranium enrichment facilities. At ETTP, UCOR views the D and D process as a 'Waste Factory' with waste production lines from the point-of-generation to the point-of-disposal. Safely transforming vertically-standing buildings into horizontally-lying waste in a disposal facility is the primary cleanup objective. Whereas a factory produces widgets, D and D produces waste-lots of waste. In support of the Waste Factory view, UCOR is developing a systems planning tool to help better plan how to effect cleanup by improving waste planning, uniting waste generator with waste dis-positioner, and represent the 'waste factory' in a computer model that allows the D and D and waste management teams to better understand available disposal paths, waste uncertainties and potential consequences, driving variables, and sensitivity to changes. Any model of reality represents a compromise. Part of the Waste Factory Model's value may be in providing standardization and relative direction for assisting decision making as opposed to absolute cost or schedule answers. From that relative direction, management can commission detailed planning and estimating. Also, the model's output credibility is tied directly to its input quality. That is why, as discussed above, the Waste Factory Model's key informational component will be the standardized waste streams (e.g., Structure/Debris disposed at EMWMF) and associated standardized unit costs. The model development process generally, and the development team's collaboration, specifically, is most important. Building-in this integrity up-front, transparently, will help ensure that the model outputs are known, understood, and credible (no mysterious 'black-box' components). The Waste Factory Model is envisioned to help improve understanding of a given project's waste implications; help reveal and suggest the important few variables out of the trivial many; reveal likely process bottlenecks, and help focus risk mitigation and assumption management efforts to better manage the projected total cost. In the long term, the UCOR team's goal is to incorporate an information feedback loop to help improve the accuracy of key model attributes, such as the standardized cost information. This way, by design, the model output should improve over time and thus help the model mature into both a credible scenario tool and a standardized project planning resource. The initial model capabilities may be narrow, but with time and effort it may prove to be a timely and cost-effective tool. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Update of ASHRAE Standard 140 Section 5.2 and Related Sections (BESTEST Building Thermal Fabric Test Cases)

This report documents new work intended to update the current building thermal fabric software-to-software comparative test specifications and example results of ANSI/ASHRAE Standard 140-2017, Sections 5.2.1, 5.2.2, 5.2.3, and related supporting sections. The Building Energy Simulation Test and Diagnostic Method (BESTEST) test specification and example results that provide the basis for these Standard 140 sections were originally published in 1995. The state of the art in building energy simulation modeling has advanced since then. Additionally, comments on the test specification over the years highlighted ambiguities, further necessitating the update to the original work. This new work was conducted for the U.S. Department of Energy (DOE) by Argonne National Laboratory (Argonne) and National Renewable Energy Laboratory (NREL), in collaboration with a working group of international experts associated with the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standing Standard Project Committee (SSPC) 140. SSPC 140 is responsible for ANSI/ASHRAE Standard 140. The new work, presented in this report, defined the test cases and specifications such that building energy simulation programs with time steps of one hour or less can perform the tests. Revisions to the test specification and update of example results follow the vetting process of iterative field trials established for previous BESTEST work that has been adapted for ASHRAE Standard 140.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

MDSplus yesterday, today and tomorrow

MDSplus is a data acquisition and analysis system used worldwide predominantly in the fusion research community. Development began 31 years ago by a collaboration of software developers who were charged with providing a data acquisition system for three new fusion experiments under construction: CMOD at MIT, ZTH at LANL and RFX at Padova, Italy. The design of MDSplus combined the functionality of MDS (MIT/Model Data System developed at MIT for the Alcator and Tara fusion experiments) with new features suggested by the developers from the other laboratories. The development of MDSplus used a RAD (rapid application development) approach before RAD became a mainstream methodology. MDSplus was implemented and ready for the initial operation of CMOD in 1991. Since that time, many other fusion facilities started using MDSplus for data acquisition and/or for exporting their data to other sites. Today MDSplus is still used around the world for fusion energy research, space exploration and other fields of science and technology. Work on MDSplus continues to enhance its capabilities, support more platforms, and improve its reliability. It is anticipated that MDSplus will continue to provide valuable tools for the fusion energy research community. In conclusion, this paper describes some of the history of the MDSplus software, the work that is currently underway, and the plans to enable MDSplus to continue to be available and supported long into the future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data Management and Science at DOE BES User Facilities – Past, Present, and Future

The primary mission of user facilities operated by Basic Energy Sciences under the Department of Energy is to produce data for users in support of open science and basic research. We trace back almost 30 years of history across selected user facilities illustrating the evolution of facility data management practices and how these practices have related to performing scientific research. The facilities cover multiple techniques such as X-ray and neutron scattering, imaging and tomography sciences. Over time, detector and data acquisition technologies have dramatically increased the ability to produce prolific volumes of data challenging the traditional paradigm of users taking data home upon completion of their experiments to process and publish their results. During this time, computing capacity has also increased dramatically, though the size of the data has grown significantly faster than the capacity of one's laptop to manage and process this new facility produced data. Trends indicate that this will continue to be the case for yet some time. Thus users face a quandary for how to manage today's data complexity and size as these may exceed the computing resources users have available to themselves. This same quandary can also stifle collaboration and sharing. Realizing this, some facilities are already providing web portal access to data and computing thereby providing users access to resources they need. Portal based computing is now driving researchers to think about how to use the data collected at multiple facilities in an integrated way to perform their research, and also how to collaborate and share data. In the future, inter-facility data management systems will enable next tier cross-instrument-cross facility scientific research fuelled by smart applications residing upon user computer resources. We can learn from the medical imaging community that has been working since the early 1990's to integrate data from across multiple modalities to achieve better diagnoses - similarly, data fusion across BES facilities will lead to new scientific discoveries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High Level Requirements for the Nuclear Energy -- Knowledge Base for Advanced Modeling and Simulation (NE-KAMS)

The US Department of Energy, Office of Nuclear Energy (DOE-NE), has been tasked with the important mission of ensuring that nuclear energy remains a compelling and viable energy source in the U.S. The motivations behind this mission include cost-effectively meeting the expected increases in the power needs of the country, reducing carbon emissions and reducing dependence on foreign energy sources. In the near term, to ensure that nuclear power remains a key element of U.S. energy strategy and portfolio, the DOE-NE will be working with the nuclear industry to support safe and efficient operations of existing nuclear power plants. In the long term, to meet the increasing energy needs of the U.S., the DOE-NE will be investing in research and development (R&D) and working in concert with the nuclear industry to build and deploy new, safer and more efficient nuclear power plants. The safe and efficient operations of existing nuclear power plants and designing, licensing and deploying new reactor designs, however, will require focused R&D programs as well as the extensive use and leveraging of advanced modeling and simulation (M&S). M&S will play a key role in ensuring safe and efficient operations of existing and new nuclear reactors. The DOE-NE has been actively developing and promoting the use of advanced M&S in reactor design and analysis through its R&D programs, e.g., the Nuclear Energy Advanced Modeling and Simulation (NEAMS) and Consortium for Advanced Simulation of Light Water Reactors (CASL) programs. Also, nuclear reactor vendors are already using CFD and CSM, for design, analysis, and licensing. However, these M&S tools cannot be used with confidence for nuclear reactor applications unless accompanied and supported by verification and validation (V&V) and uncertainty quantification (UQ) processes and procedures which provide quantitative measures of uncertainty for specific applications. The Nuclear Energy Knowledge base for Advanced Modeling and Simulation (NE-KAMS) is being developed at the Idaho National Laboratory in conjunction with Bettis Laboratory, Sandia National Laboratories, Argonne National Laboratory, Utah State University and others with the objective of establishing a comprehensive and web-accessible knowledge base that will provide technical services and resources for V&V and UQ of M&S in nuclear energy sciences and engineering. The knowledge base will serve as an important resource for technical exchange and collaboration that will enable credible and reliable computational models and simulations for application to nuclear reactor design, analysis and licensing. NE-KAMS will serve as a valuable resource for the nuclear industry, academia, the national laboratories, the U.S. Nuclear Regulatory Commission (NRC) and the public and will help ensure the safe, economical and reliable operation of existing and future nuclear reactors. From its inception, NE-KAMS will directly support nuclear energy research, development and demonstration programs within the U.S. Department of Energy (DOE), including the CASL, NEAMS, Light Water Reactor Sustainability (LWRS), Small Modular Reactors (SMR), and Next Generation Nuclear Power Plant (NGNP) programs. These programs all involve M&S of nuclear reactor systems, components and processes, and it is envisioned that NE-KAMS will help to coordinate and facilitate collaboration and sharing of resources and expertise for V&V and UQ across these programs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A colalborative environment for information driven safeguards

For two decades, the IAEA has recognized the need for a comprehensive and strongly integrated Knowledge Management system to support its Information Driven Safeguards activities. In the past, plans for the development of such a system have progressed slowly due to concerns over costs and feasibility. In recent years, Los Alamos National Laboratory has developed a knowledge management system that could serve as the basis for an IAEA Collaborative Environment (ICE). The ICE derivative knowledge management system described in this paper addresses the challenge of living in an era of information overload coupled with certain knowledge shortfalls. The paper describes and defines a system that is flexible, yet ensures coordinated and focused collaboration, broad data evaluation capabilities, architected and organized work flows, and improved communications. The paper and demonstration of ICE will utilize a hypothetical scenario to highlight the functional features that facilitate collaboration amongst and between information analysts and inspectors. The scenario will place these two groups into a simulated planning exercise for a safeguards inspection drawing upon past data acquisitions, inspection reports, analyst conclusions, and a coordinated walk-through of a 3-D model of the facility. Subsequent to the conduct of the simulated facility inspection, the detection of an anomaly and pursuit of follow up activities will illustrate the event notification, information sharing, and collaborative capabilities of the system. The use of a collaborative environment such as ICE to fulfill the complicated knowledge management demands of the Agency and facilitate the completion of annual State Evaluation Reports will also be addressed.

97 MATHEMATICS AND COMPUTING↗

Data Management and Its Role in Delivering Science at DOE BES User Facilities – Past, Present, and Future

Abstract. The primary mission of user facilities operated by Basic Energy Sciences under the Department of Energy is to produce data for users in support of open science and basic research [1]. We trace back almost 30 years of history across selected user facilities illustrating the evolution of facility data management practices and how these practices have related to performing scientific research. The facilities cover multiple techniques such as X-ray and neutron scattering, imaging and tomography sciences. Over time, detector and data acquisition technologies have dramatically increased the ability to produce prolific volumes of data challenging the traditional paradigm of users taking data home upon completion of their experiments to process and publish their results. During this time, computing capacity has also increased dramatically, though the size of the data has grown significantly faster than the capacity of one’s laptop to manage and process this new facility produced data. Trends indicate that this will continue to be the case for yet some time. Thus users face a quandary for how to manage today’s data complexity and size as these may exceed the computing resources users have available to themselves. This same quandary can also stifle collaboration and sharing. Realizing this, some facilities are already providing web portal access to data and computing thereby providing users access to resources they need [2]. Portal based computing is now driving researchers to think about how to use the data collected at multiple facilities in an integrated way to perform their research, and also how to collaborate and share data. In the future, inter-facility data management systems will enable next tier cross-instrument-cross facility scientific research fuelled by smart applications residing upon user computer resources. We can learn from the medical imaging community that has been working since the early 1990’s to integrate data from across multiple modalities to achieve better diagnoses [3] – similarly, data fusion across BES facilities will lead to new scientific discoveries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coupling the System Analysis Module with SAS4A/SASSYS-1

SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format for PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly attributed to the limited maturity of the SAM development effort. The severe accident modeling capabilities in SAS4A/SASSYS-1 (sodium boiling, fuel melting and relocation) will continue to play a vital role for a long time. Therefore, the SAS4A/SASSYS-1 modernization effort should remain a high priority task under the ART program to ensure continued participation in domestic and international SFR safety collaborations and design optimizations. On the other hand, SAM provides an advanced system analysis tool, with improved numerical solution schemes, data management, code flexibility, and accuracy. SAM is still in early stages of development and will require continued support from NEAMS to fulfill its potential and to mature into a production tool for advanced reactor safety analysis. The effort to couple SAS4A/SASSYS-1 and SAM is the first step on the integration of these modeling capabilities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Improvements in Electron-Photon-Relaxation Data for MCNP6

The Los Alamos Monte Carlo transport code MCNP6 has recently benefitted from significant work to improve the photon-electron transport and atomic-relaxation capabilities of the code. The improvements include extension of existing photon data to lower energies than previously supported; addition of new data such as subshell-specific photoelectric cross sections; completion of the incoherent and coherent form factor data to cover all scattering angles at all supported energies; new data for electron interactions including Bremsstrahlung, elastic scattering, subshell-specific electroionization, and atomic excitation; a much more detailed representation for atomic relaxation; and an entirely new (to MCNP) approach to electron transport: the single-event method. These improvements were made available with the initial production release of MCNP6 along with an extended electron, photon, and relaxation data file eprdata12 to support the new capabilities. More recently new data have become available and have now been incorporated into MCNP6, correcting a few issues with the previous work, and adding new sets of cross sections that were not included in eprdata12. The purpose of this paper is to introduce these newer changes and enhancements, which will be included with the next public release of the MCNP6 code system. The database that supports these developments relies on an evolving set of libraries originally released by D. E. Cullen and collaborators as separate data for photo-atomic interactions (EPDL), atomic relaxation (EADL), and electro-atomic interactions (EEDL). An updated version of this release was officially adopted in the ENDF/B VI.8 release of the Evaluated Nuclear Data File and it was this source that was used to produce the ACE (A Compact ENDF) format library eprdata12 for use in the initial production release of MCNP6.1 (and the subsequent interim release MCNP6.1.1). The latest improved version of this database was released by Cullen in 2014. This is the EPICS2014 collection, which includes both an ENDF-formatted file and separate EPDL, EADL, and EEDL files. In the area of photon-electron transport and atomic-relaxation, the newest enhancements to the current version of MCNP6 (scheduled for release as MCNP6.2) are primarily based on improvements and additions drawn from the EPICS2014 data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

IBEX: An open infrastructure software platform to facilitate collaborative work in radiomics

Purpose: Radiomics, which is the high-throughput extraction and analysis of quantitative image features, has been shown to have considerable potential to quantify the tumor phenotype. However, at present, a lack of software infrastructure has impeded the development of radiomics and its applications. Therefore, the authors developed the imaging biomarker explorer (IBEX), an open infrastructure software platform that flexibly supports common radiomics workflow tasks such as multimodality image data import and review, development of feature extraction algorithms, model validation, and consistent data sharing among multiple institutions. Methods: The IBEX software package was developed using the MATLAB and C/C++ programming languages. The software architecture deploys the modern model-view-controller, unit testing, and function handle programming concepts to isolate each quantitative imaging analysis task, to validate if their relevant data and algorithms are fit for use, and to plug in new modules. On one hand, IBEX is self-contained and ready to use: it has implemented common data importers, common image filters, and common feature extraction algorithms. On the other hand, IBEX provides an integrated development environment on top of MATLAB and C/C++, so users are not limited to its built-in functions. In the IBEX developer studio, users can plug in, debug, and test new algorithms, extending IBEX’s functionality. IBEX also supports quality assurance for data and feature algorithms: image data, regions of interest, and feature algorithm-related data can be reviewed, validated, and/or modified. More importantly, two key elements in collaborative workflows, the consistency of data sharing and the reproducibility of calculation result, are embedded in the IBEX workflow: image data, feature algorithms, and model validation including newly developed ones from different users can be easily and consistently shared so that results can be more easily reproduced between institutions. Results: Researchers with a variety of technical skill levels, including radiation oncologists, physicists, and computer scientists, have found the IBEX software to be intuitive, powerful, and easy to use. IBEX can be run at any computer with the windows operating system and 1GB RAM. The authors fully validated the implementation of all importers, preprocessing algorithms, and feature extraction algorithms. Windows version 1.0 beta of stand-alone IBEX and IBEX’s source code can be downloaded. Conclusions: The authors successfully implemented IBEX, an open infrastructure software platform that streamlines common radiomics workflow tasks. Its transparency, flexibility, and portability can greatly accelerate the pace of radiomics research and pave the way toward successful clinical translation.

60 APPLIED LIFE SCIENCES↗

Bioinformatic Teaching Resources – For Educators, by Educators – Using KBase, a Free, User-Friendly, Open Source Platform

Over the past year, biology educators and staff at the U.S. Department of Energy Systems Biology Knowledgebase (KBase) initiated a collaborative effort to develop a curriculum for bioinformatics education. KBase is a free web-based platform where anyone can conduct sophisticated and reproducible bioinformatic analyses via a graphical user interface. Here, we demonstrate the utility of KBase as a platform for bioinformatics education, and present a set of modular, adaptable, and customizable instructional units for teaching concepts in Genomics, Metagenomics, Pangenomics, and Phylogenetics. Each module contains teaching resources, publicly available data, analysis tools, and Markdown capability, enabling instructors to modify the lesson as appropriate for their specific course. We present initial student survey data on the effectiveness of using KBase for teaching bioinformatic concepts, provide an example case study, and detail the utility of the platform from an instructor’s perspective. Even as in-person teaching returns, KBase will continue to work with instructors, supporting the development of new active learning curriculum modules. For anyone utilizing the platform, the growing KBase Educators Organization provides an educators network, accompanied by community-sourced guidelines, instructional templates, and peer support, for instructors wishing to use KBase within a classroom at any educational level–whether virtual or in-person.

59 BASIC BIOLOGICAL SCIENCES↗

Explore: An Advanced Computing Agenda for Competitiveness

Over the course of this three-year grant, the Council on Competitiveness (Council) hosted six meetings of its Advanced Computing Roundtable made up of experts from a broad cross section of advanced computing users and manufacturers, and four Advanced Computing for Competitiveness Regional Forums to explore issues related to advanced computing in regions, states and localities. More than two hundred experts, stakeholders and policymakers from the federal and state levels participated in this work and provided their time and expertise to help define the opportunity in advanced computing and the barriers to it reaching its full potential as a game-changing competitive advantage for the United States economy and national security. Building on the insights of the Council’s Advanced Computing Roundtable and findings and recommendations from the four U.S. Department of Energy-supported Forums, the Council has identified several broad policy objectives for the United States related to advanced computing leadership and implementation. The United States must: Compete at the high end of advanced computing. Continue investing to be a technology leader as the world moves toward exascale computing, including in hardware, software and applications. America also must lead in strategic areas like extending Moore’s Law and quantum computing. Improve the ability of HPC-using firms to leverage advanced computing. The Council recommends steps to improve computational skills, increase industry partnerships with laboratories and academia, and expand and strengthen software partnerships. Regulatory agencies also should accelerate efforts to use modeling and simulation within the regulatory process. Expand the number of HPC-using companies in America. Too few firms are able to leverage advanced computing to innovate and compete. Federal, state and local economic development efforts should be utilized to lower barriers and teach small and medium-sized firms, particularly manufacturers, to use advanced modeling, simulation and analytics. Coordinate federal action. Federal agencies should continue to act in a coordinated fashion on advanced computing challenges through the Joint Program Office for Strategic Computing. Leverage HPC to compete in strategic technologies and applications. Leadership in advanced computing is tightly linked to leadership in artificial intelligence, the Internet of Things, cybersecurity, additive manufacturing and other emerging technologies. Public and private sector leaders should collaborate on research and partnership efforts that ensure world-class computing environments for strategic technology leadership.

advanced computing↗

CLEERS Aftertreatment Modeling and Analysis

DOE FY 2011 Advanced Combustion Technologies Annual Report. CLEERS is a research and development focus project of the Diesel Cross-Cut Team. The overall objective is to promote the development of improved computational tools for simulating realistic full-system performance of lean-burn engines and the associated emissions control systems. Three fundamental research projects are sponsored at PNNL through CLEERS: DPF, SCR, and LNT. Resources are shared between the three efforts in order to actively respond to current industrial needs. In FY 2011, more emphasis was placed on the SCR and LNT activities because of urgent application issues associated with these technologies. Objectives of this project are to lead and contribute to the Cross-Cut Lean Exhaust Emissions Reduction Simulations (CLEERS) activities - (a) Provide project updates to the industry sub-team, solicit feedback, and adjust work scope accordingly; and (b) Lead technical discussions, invite distinguished speakers, and maintain an open dialogue on selective catalytic reduction (SCR), lean-NOx trap (LNT), and diesel particulate filter (DPF) modeling issues. Fiscal Year (FY) 2011 Objectives are to: (1) Develop improved modeling capabilities for SCR and DPFs through fundamental experiments; and (2) Develop a fundamental understanding of SCR and LNT catalysts with primary focus on reaction mechanisms and material characterization. Some accomplishments are: (1) Participated in monthly CLEERS teleconferences and coordinated the calls focused on SCR, LNT and DPF technologies; (2) Updated PNNL's SCR model for the state-of-the-art commercial Cu-zeolite SCR catalyst to extract kinetic parameters and to quantitatively describe the effects of hydrothermal aging; (3) Examined the effects of hydrothermal aging on the physicochemical properties and SCR reactions using the commercial Cu catalyst in collaboration with Oak Ridge National Laboratory (ORNL); (4) Investigated the nature of Cu species and obtained kinetic parameters for small-pore zeolite-based Cu SCR catalyst. (5) Examined the effects of support materials for Ba-based LNT catalysts, and found magnesium aluminate may improve the oxides of nitrogen (NO{sub x}) reduction performance at high temperatures; (6) Investigated soot oxidation mechanisms for relevant oxidants (O{sub 2}, NO{sub 2}) through reactor experiments and transmission electron spectroscopy (TEM) analysis; (7) Seven publications and 21 public presentations (eight invited) during the past FY; and (8) Co-organized sessions on emission control and modeling for the SAE World Congress and the American Society of Mechanical Engineers Internal Combustion Engine Conference.

33 ADVANCED PROPULSION SYSTEMS↗

TREC 2010 legal track: method and results of the ELK collaboration

The ELK team ([E]WA-IIT, [L]os Alamos National laboratory (LANL), and [K]ayvium Corporation (ELK)) used the legal Track task 302 as an opportunity to compare and integrate advanced semantic-automation strategies. The team members believe that enabling parties to discover, consume, analyze, and make decisions in a noisy and information-overloaded environment requires new tools. Together, as well as independently, they are actively developing these tools and view the TREC exercise as an opportunity to test, compare, and complement tools and approaches. Our collaboration is new to TREC, brought together by a shared interest in document relevance, concept-in-context identification and annotation, and the recognition that words out-of-context do not a match make. The team's intent was to lay the foundation for automating the mining and analysis of large volumes of electronic information by litigants and their lawyers, not only in the context of document discovery, but also to support litigation strategy, motion practice, deposition, trial tactics, etc. The premise was that a Subject Matter Expert- (SME-) built model can be automatically mapped onto various search engines for document retrieval, organization, relevance scoring, analysis and decision support. In the end, we ran nearly a dozen models, mostly, but not exclusively, with Kayvium Corporation's knowledge automation technology. The Sal Database Search Engine we used had a bug in its proximity feature, requiring that we develop a workaround. While the work-around was successful, it left us with insufficient time to converge the models to achieve expected quality. However, with optimized proximity processing in place, we would be able to run the model many more times, and believe repeatable quality would be a matter of working through a few requests to get the approach right. We believe that with more time, the results we would achieve might point towards a new way of processing documents for litigation support, so litigators can be confident that results are complete but not overly inclusive.

97 MATHEMATICS AND COMPUTING↗